summaryrefslogtreecommitdiffstats
path: root/fs
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] reduce size of bio mempoolsBenjamin LaHaise2006-03-231-4/+4
| | | | | | | | | | | | | | | The biovec default mempool limit of 256 entries results in over 3MB of RAM being permanently pinned, even on systems with only 128MB of RAM. Since mempool tries to allocate from the system pool first, it makes sense to reduce the size of the mempool fallbacks to a more reasonable limit of 1-5 entries -- enough for the system to be able to make progress even under load. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Acked-by: Jens Axboe <axboe@suse.de> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] more for_each_cpu() conversionsAndrew Morton2006-03-232-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we stop allocating percpu memory for not-possible CPUs we must not touch the percpu data for not-possible CPUs at all. The correct way of doing this is to test cpu_possible() or to use for_each_cpu(). This patch is a kernel-wide sweep of all instances of NR_CPUS. I found very few instances of this bug, if any. But the patch converts lots of open-coded test to use the preferred helper macros. Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Acked-by: Kyle McMartin <kyle@parisc-linux.org> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Andi Kleen <ak@muc.de> Cc: Christian Zankel <chris@zankel.net> Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: Nathan Scott <nathans@sgi.com> Cc: Jens Axboe <axboe@suse.de> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] get_empty_filp tweaks, inline epoll_init_file()Benjamin LaHaise2006-03-232-13/+6
| | | | | | | | | | | | Eliminate a handful of cache references by keeping current in a register instead of reloading (helps x86) and avoiding the overhead of a function call. Inlining eventpoll_init_file() saves 24 bytes. Also reorder file initialization to make writes occur more sequentially. Signed-off-by: Benjamin LaHaise <bcrl@linux.intel.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fs/*/file.c: drop insane header dependenciesAlexey Dobriyan2006-03-233-18/+0
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] devpts: use lib/parser.c for parsing mount optionsDomen Puncer2006-03-231-27/+49
| | | | | | | | | Item from "2.6 should fix" list. Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ufs: switch to inode_inc_count, inode_dec_countAlexey Dobriyan2006-03-231-30/+18
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext2: switch to inode_inc_count, inode_dec_countAlexey Dobriyan2006-03-231-35/+19
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sysv: switch to inode_inc_count, inode_dec_countAlexey Dobriyan2006-03-231-30/+18
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] minix: switch to inode_inc_link_count, inode_dec_link_countAlexey Dobriyan2006-03-231-30/+18
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fs/ufs/file.c: drop insane header dependenciesAlexey Dobriyan2006-03-231-10/+0
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fat_lock is used as a mutex, convert it to using the new mutex primitiveArjan van de Ven2006-03-231-3/+3
| | | | | | | | | | | | The fat code uses the fat_lock always in a mutex way (taking and releasing the lock in the same function), the patch below converts it into the new mutex primitive. Please consider this patch for the code. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: UDFIngo Molnar2006-03-233-23/+23
| | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: NCPFSIngo Molnar2006-03-234-24/+24
| | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] convert ext3's truncate_sem to a mutexArjan van de Ven2006-03-234-12/+12
| | | | | | | | | ext3's truncate_sem is always released in the same function it's taken and it otherwise is a mutex as well.. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: HPFSIngo Molnar2006-03-234-39/+40
| | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: autofs4 wq_semIngo Molnar2006-03-233-10/+11
| | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: JFFSIngo Molnar2006-03-234-49/+50
| | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: fs/seq_file.cIngo Molnar2006-03-231-5/+5
| | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: fs/libfs.cIngo Molnar2006-03-231-6/+8
| | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: jbd, j_checkpoint_mutexArjan van de Ven2006-03-233-6/+6
| | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: ipruneIngo Molnar2006-03-232-11/+11
| | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: vfs_rename_mutexArjan van de Ven2006-03-239-41/+41
| | | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: eventpollArjan van de Ven2006-03-231-11/+12
| | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: inotifyIngo Molnar2006-03-232-56/+56
| | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: John McCutchan <ttb@tentacle.dhs.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: Robert Love <rml@novell.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: quotaIngo Molnar2006-03-235-66/+67
| | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: blockdev #2Arjan van de Ven2006-03-233-19/+19
| | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] convert fs/9p/ to mutexes, fix locking bugsIngo Molnar2006-03-231-5/+6
| | | | | | | | | | | | Convert fs/9p/mux.c from semaphore to mutex. NOTE: fixed locking bugs in the process - the code was using semaphores the other way around. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Fix oops in invalidate_dquots()Jan Kara2006-03-231-13/+39
| | | | | | | | | | | | | | | | When quota is being turned off we assumed that all the references to dquots were already dropped. That need not be true as inodes being deleted are not on superblock's inodes list and hence we need not reach it when removing quota references from inodes. So invalidate_dquots() has to wait for all the users of dquots (as quota is already marked as turned off, no new references can be acquired and so this is bound to happen rather early). When we do this, we can also remove the iprune_sem locking as it was protecting us against exactly the same problem when freeing inodes icache memory. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Shrinks sizeof(files_struct) and better layoutEric Dumazet2006-03-233-29/+22
| | | | | | | | | | | | | | | | | | | | | | | | 1) Reduce the size of (struct fdtable) to exactly 64 bytes on 32bits platforms, lowering kmalloc() allocated space by 50%. 2) Reduce the size of (files_struct), using a special 32 bits (or 64bits) embedded_fd_set, instead of a 1024 bits fd_set for the close_on_exec_init and open_fds_init fields. This save some ram (248 bytes per task) as most tasks dont open more than 32 files. D-Cache footprint for such tasks is also reduced to the minimum. 3) Reduce size of allocated fdset. Currently two full pages are allocated, that is 32768 bits on x86 for example, and way too much. The minimum is now L1_CACHE_BYTES. UP and SMP should benefit from this patch, because most tasks will touch only one cache line when open()/close() stdin/stdout/stderr (0/1/2), (next_fd, close_on_exec_init, open_fds_init, fd_array[0 .. 2] being in the same cache line) Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3_readdir: use generic readaheadAndrew Morton2006-03-232-29/+25
| | | | | | | | | | | | | | | | | | | | | | Linus points out that ext3_readdir's readahead only cuts in when ext3_readdir() is operating at the very start of the directory. So for large directories we end up performing no readahead at all and we suck. So take it all out and use the core VM's page_cache_readahead(). This means that ext3 directory reads will use all of readahead's dynamic sizing goop. Note that we're using the directory's filp->f_ra to hold the readahead state, but readahead is actually being performed against the underlying blockdev's address_space. Fortunately the readahead code is all set up to handle this. Tested with printk. It works. I was struggling to find a real workload which actually cared. (The patch also exports page_cache_readahead() to GPL modules) Cc: "Stephen C. Tweedie" <sct@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] proc: fix duplicate line in /proc/devicesNeil Horman2006-03-231-1/+1
| | | | | | | | | | Fix a duplicate block device line printed after the "Block device" header in /proc/devices. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2006-03-226-6/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: fixed path to moved file in include/linux/device.h Fix spelling in E1000_DISABLE_PACKET_SPLIT Kconfig description Documentation/dvb/get_dvb_firmware: fix firmware URL Documentation: Update to BUG-HUNTING Remove superfluous NOTIFY_COOKIE_LEN define add "tags" to .gitignore Fix "frist", "fisrt", typos fix rwlock usage example It's UTF-8
| * It's UTF-8Alexey Dobriyan2006-03-226-6/+6
| | | | | | | | | | | | | | Fix some comments to "UTF-8". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | [PATCH] page migration reorgChristoph Lameter2006-03-222-62/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Centralize the page migration functions in anticipation of additional tinkering. Creates a new file mm/migrate.c 1. Extract buffer_migrate_page() from fs/buffer.c 2. Extract central migration code from vmscan.c 3. Extract some components from mempolicy.c 4. Export pageout() and remove_from_swap() from vmscan.c 5. Make it possible to configure NUMA systems without page migration and non-NUMA systems with page migration. I had to so some #ifdeffing in mempolicy.c that may need a cleanup. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] convert hugetlbfs_counter to atomicChen, Kenneth W2006-03-221-16/+2
| | | | | | | | | | | | | | | | | | | | Implementation of hugetlbfs_counter() is functionally equivalent to atomic_inc_return(). Use the simpler atomic form. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] hugepage: Strict page reservation for hugepage inodesDavid Gibson2006-03-221-52/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These days, hugepages are demand-allocated at first fault time. There's a somewhat dubious (and racy) heuristic when making a new mmap() to check if there are enough available hugepages to fully satisfy that mapping. A particularly obvious case where the heuristic breaks down is where a process maps its hugepages not as a single chunk, but as a bunch of individually mmap()ed (or shmat()ed) blocks without touching and instantiating the pages in between allocations. In this case the size of each block is compared against the total number of available hugepages. It's thus easy for the process to become overcommitted, because each block mapping will succeed, although the total number of hugepages required by all blocks exceeds the number available. In particular, this defeats such a program which will detect a mapping failure and adjust its hugepage usage downward accordingly. The patch below addresses this problem, by strictly reserving a number of physical hugepages for hugepage inodes which have been mapped, but not instatiated. MAP_SHARED mappings are thus "safe" - they will fail on mmap(), not later with an OOM SIGKILL. MAP_PRIVATE mappings can still trigger an OOM. (Actually SHARED mappings can technically still OOM, but only if the sysadmin explicitly reduces the hugepage pool between mapping and instantiation) This patch appears to address the problem at hand - it allows DB2 to start correctly, for instance, which previously suffered the failure described above. This patch causes no regressions on the libhugetblfs testsuite, and makes a test (designed to catch this problem) pass which previously failed (ppc64, POWER5). Signed-off-by: David Gibson <dwg@au1.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] mm: nommu use compound pagesNick Piggin2006-03-221-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that compound page handling is properly fixed in the VM, move nommu over to using compound pages rather than rolling their own refcounting. nommu vm page refcounting is broken anyway, but there is no need to have divergent code in the core VM now, nor when it gets fixed. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: David Howells <dhowells@redhat.com> (Needs testing, please). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] slab: Remove SLAB_NO_REAP optionChristoph Lameter2006-03-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SLAB_NO_REAP is documented as an option that will cause this slab not to be reaped under memory pressure. However, that is not what happens. The only thing that SLAB_NO_REAP controls at the moment is the reclaim of the unused slab elements that were allocated in batch in cache_reap(). Cache_reap() is run every few seconds independently of memory pressure. Could we remove the whole thing? Its only used by three slabs anyways and I cannot find a reason for having this option. There is an additional problem with SLAB_NO_REAP. If set then the recovery of objects from alien caches is switched off. Objects not freed on the same node where they were initially allocated will only be reused if a certain amount of objects accumulates from one alien node (not very likely) or if the cache is explicitly shrunk. (Strangely __cache_shrink does not check for SLAB_NO_REAP) Getting rid of SLAB_NO_REAP fixes the problems with alien cache freeing. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] v9fs: assign dentry ops to negative dentriesLatchesar Ionkov2006-03-221-2/+1
|/ | | | | | | | | | | | | | | | If a file is not found in v9fs_vfs_lookup, the function creates negative dentry, but doesn't assign any dentry ops. This leaves the negative entry in the cache (there is no d_delete to mark it for removal). If the file is created outside of the mounted v9fs filesystem, the file shows up in the directory with weird permissions. This patch assigns the default v9fs dentry ops to the negative dentry. Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sysfs: fix a kobject leak in sysfs_add_link on the error pathGreg Kroah-Hartman2006-03-201-0/+1
| | | | | | | | As pointed out by Oliver Neukum. Cc: Maneesh Soni <maneesh@in.ibm.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] sysfs: don't export dir symbolsGreg Kroah-Hartman2006-03-201-4/+0
| | | | | | | | These functions should only be used by the kobject core, and if any driver tries to use them, bad things happen. Unexport them to try to prevent this from happening. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] debugfs: Add debugfs_create_blob() helper for exporting binary dataMichael Ellerman2006-03-201-0/+46
| | | | | | | | | I wanted to export a binary blob via debugfs, and although it was pretty easy it seems like it'd be easier if there was a helper for it. It's a pity we need the wrapper struct but I can't see a cleaner way to do it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] sysfs: fix problem with duplicate sysfs directories and filesManeesh Soni2006-03-204-5/+39
| | | | | | | | The following patch checks for existing sysfs_dirent before preparing new one while creating sysfs directories and files. Signed-off-by: Maneesh Soni <maneesh@in.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] sysfs: kzalloc conversionEric Sesterhenn2006-03-202-4/+2
| | | | | | | | this converts fs/sysfs to kzalloc() usage. compile tested with make allyesconfig Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] kobj_map semaphore to mutex conversionJes Sorensen2006-03-201-8/+9
| | | | | | | | | Convert the kobj_map code to use a mutex instead of a semaphore. It converts the single two users as well, genhd.c and char_dev.c. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] sysfs: sysfs_remove_dir() needs to invalidate the dentryGreg Kroah-Hartman2006-03-202-1/+6
| | | | | | | | | | | | | | When calling sysfs_remove_dir() don't allow any further sysfs functions to work for this kobject anymore. This fixes a nasty USB cdc-acm oops on disconnect. Many thanks to Bob Copeland and Paul Fulghum for taking the time to track this down. Cc: Bob Copeland <email@bobcopeland.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Maneesh Soni <maneesh@in.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2006-03-2024-204/+429
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: JFS: add uid, gid, and umask mount options JFS: Take logsync lock before testing mp->lsn JFS: kzalloc conversion JFS: Add missing file from fa3241d24cf1182b0ffb6e4d412c3bc2a2ab7bf6 JFS: Use the kthread_ API JFS: Fix regression. fsck complains if symlinks do not have INLINEEA attribute JFS: ext2 inode attributes for jfs JFS: semaphore to mutex conversion. JFS: make buddy table static JFS: Add back directory i_size calculations for legacy partitions
| * Merge with /home/shaggy/git/linus-clean/Dave Kleikamp2006-03-14152-1845/+2653
| |\
| * | JFS: add uid, gid, and umask mount optionsDave Kleikamp2006-03-095-10/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OS/2 doesn't initialize the uid, gid, or unix-style permission bits. The uid, gid, & umask mount options perform pretty much like those for the fat file system, overriding what is stored on disk. This is useful for users sharing the file system with OS/2. I implemented a little feature so that if you mask the execute bit, it will be re-enabled on directories when the appropriate read bit is unmasked. I didn't want to implement an fmask & dmask option. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
| * | JFS: Take logsync lock before testing mp->lsnDave Kleikamp2006-03-082-9/+4
| | | | | | | | | | | | | | | | | | This fixes a race where lsn could be cleared before taking the lock Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
OpenPOWER on IntegriCloud