summaryrefslogtreecommitdiffstats
path: root/fs/ocfs2/ocfs2.h
Commit message (Collapse)AuthorAgeFilesLines
* ocfs2: avoid unaligned access to dqc_bitmapAkinobu Mita2011-12-011-0/+47
| | | | | | | | | | | | | | | | | | | | | | The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned, but not 64-bit aligned. The dqc_bitmap is accessed by ocfs2_set_bit(), ocfs2_clear_bit(), ocfs2_test_bit(), or ocfs2_find_next_zero_bit(). These are wrapper macros for ext2_*_bit() which need to take an unsigned long aligned address (though some architectures are able to handle unaligned address correctly) So some 64bit architectures may not be able to access the dqc_bitmap correctly. This avoids such unaligned access by using another wrapper functions for ext2_*_bit(). The code is taken from fs/ext4/mballoc.c which also need to handle unaligned bitmap access. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Joel Becker <jlbec@evilplan.org>
* ocfs2: use proper little-endian bitopsAkinobu Mita2011-05-311-2/+2
| | | | | | | | | | | Using __test_and_{set,clear}_bit_le() with ignoring its return value can be replaced with __{set,clear}_bit_le(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: ocfs2-devel@oss.oracle.com Signed-off-by: Joel Becker <jlbec@evilplan.org>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2011-03-281-9/+14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (39 commits) Treat writes as new when holes span across page boundaries fs,ocfs2: Move o2net_get_func_run_time under CONFIG_OCFS2_FS_STATS. ocfs2/dlm: Move kmalloc() outside the spinlock ocfs2: Make the left masklogs compat. ocfs2: Remove masklog ML_AIO. ocfs2: Remove masklog ML_UPTODATE. ocfs2: Remove masklog ML_BH_IO. ocfs2: Remove masklog ML_JOURNAL. ocfs2: Remove masklog ML_EXPORT. ocfs2: Remove masklog ML_DCACHE. ocfs2: Remove masklog ML_NAMEI. ocfs2: Remove mlog(0) from fs/ocfs2/dir.c ocfs2: remove NAMEI from symlink.c ocfs2: Remove masklog ML_QUOTA. ocfs2: Remove mlog(0) from quota_local.c. ocfs2: Remove masklog ML_RESERVATIONS. ocfs2: Remove masklog ML_XATTR. ocfs2: Remove masklog ML_SUPER. ocfs2: Remove mlog(0) from fs/ocfs2/heartbeat.c ocfs2: Remove mlog(0) from fs/ocfs2/slot_map.c ... Fix up trivial conflict in fs/ocfs2/super.c
| * ocfs2: Use hrtimer to track ocfs2 fs lock statsSunil Mushran2011-02-201-9/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch makes use of the hrtimer to track times in ocfs2 lock stats. The patch is a bit involved to ensure no additional impact on the memory footprint. The size of ocfs2_inode_cache remains 1280 bytes on 32-bit systems. A related change was to modify the unit of the max wait time from nanosec to microsec allowing us to track max time larger than 4 secs. This change necessitated the bumping of the output version in the debugfs file, locking_state, from 2 to 3. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
* | ocfs2: use little-endian bitopsAkinobu Mita2011-03-231-5/+5
|/ | | | | | | | | | | | As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Joel Becker <joel.becker@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ocfs2: Try to free truncate log when meeting ENOSPC in write.Tao Ma2010-12-161-0/+5
| | | | | | | | | | | | | | | | | | | | | Recently, one of our colleagues meet with a problem that if we write/delete a 32mb files repeatly, we will get an ENOSPC in the end. And the corresponding bug is 1288. http://oss.oracle.com/bugzilla/show_bug.cgi?id=1288 The real problem is that although we have freed the clusters, they are in truncate log and they will be summed up so that we can free them once in a whole. So this patch just try to resolve it. In case we see -ENOSPC in ocfs2_write_begin_no_lock, we will check whether the truncate log has enough clusters for our need, if yes, we will try to flush the truncate log at that point and try again. This method is inspired by Mark Fasheh <mfasheh@suse.com>. Thanks. Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: char is not always signedMilton Miller2010-11-181-3/+3
| | | | | | | | | | | Commit 1c66b360fe262 (Change some lock status member in ocfs2_lock_res to char.) states that these fields need to be signed due to comparision to -1, but only changed the type from unsigned char to char. However, it is a compiler option if char is a signed or unsigned type. Change these fields to signed char so the code will work with all compilers. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Change some lock status member in ocfs2_lock_res to char.Tao Ma2010-11-131-3/+3
| | | | | | | | | | | | Commit 83fd9c7 changes l_level, l_requested and l_blocking of ocfs2_lock_res from int to unsigned char. But actually it is initially as -1(ocfs2_lock_res_init_common) which correspoding to 255 for unsigned char. So the whole dlm lock mechanism doesn't work now which means a disaster to ocfs2. Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* Merge branch 'globalheartbeat-2' of ↵Joel Becker2010-10-151-6/+34
|\ | | | | | | | | | | | | git://oss.oracle.com/git/smushran/linux-2.6 into ocfs2-merge-window Conflicts: fs/ocfs2/ocfs2.h
| * ocfs2: Add support for heartbeat=global mount optionSunil Mushran2010-10-071-1/+3
| | | | | | | | | | | | | | Adds support for heartbeat=global mount option. It ensures that the heartbeat mode passed matches the one enabled on disk. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
| * ocfs2: Add an incompat feature flag OCFS2_FEATURE_INCOMPAT_CLUSTERINFOSunil Mushran2010-10-091-2/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OCFS2_FEATURE_INCOMPAT_CLUSTERINFO allows us to use sb->s_cluster_info for both userspace and o2cb cluster stacks. It also allows us to extend cluster info to include stack flags. This patch also adds stackflags to sb->s_clusterinfo. It also introduces a clusterinfo flag OCFS2_CLUSTER_O2CB_GLOBAL_HEARTBEAT to denote the enabled global heartbeat mode. This incompat flag can be set/cleared using tunefs.ocfs2 --fs-features. The clusterinfo flag is set/cleared using tunefs.ocfs2 --update-cluster-stack. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
* | ocfs2: Add a mount option "coherency=*" to handle cluster coherency for ↵Tristan Ye2010-10-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | O_DIRECT writes. Currently, the default behavior of O_DIRECT writes was allowing concurrent writing among nodes to the same file, with no cluster coherency guaranteed (no EX lock held). This can leave stale data in the cache for buffered reads on other nodes. The new mount option introduce a chance to choose two different behaviors for O_DIRECT writes: * coherency=full, as the default value, will disallow concurrent O_DIRECT writes by taking EX locks. * coherency=buffered, allow concurrent O_DIRECT writes without EX lock among nodes, which gains high performance at risk of getting stale data on other nodes. Signed-off-by: Tristan Ye <tristan.ye@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* | ocfs2: Cache system inodes of other slots.Tao Ma2010-09-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Durring orphan scan, if we are slot 0, and we are replaying orphan_dir:0001, the general process is that for every file in this dir: 1. we will iget orphan_dir:0001, since there is no inode for it. we will have to create an inode and read it from the disk. 2. do the normal work, such as delete_inode and remove it from the dir if it is allowed. 3. call iput orphan_dir:0001 when we are done. In this case, since we have no dcache for this inode, i_count will reach 0, and VFS will have to call clear_inode and in ocfs2_clear_inode we will checkpoint the inode which will let ocfs2_cmt and journald begin to work. 4. We loop back to 1 for the next file. So you see, actually for every deleted file, we have to read the orphan dir from the disk and checkpoint the journal. It is very time consuming and cause a lot of journal checkpoint I/O. A better solution is that we can have another reference for these inodes in ocfs2_super. So if there is no other race among nodes(which will let dlmglue to checkpoint the inode), for step 3, clear_inode won't be called and for step 1, we may only need to read the inode for the 1st time. This is a big win for us. So this patch will try to cache system inodes of other slots so that we will have one more reference for these inodes and avoid the extra inode read and journal checkpoint. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* | Reorganize data elements to reduce struct sizesGoldwyn Rodrigues2010-09-101-8/+15
|/ | | | | | | | | | | | | | | Thanks for the comments. I have incorportated them all. CONFIG_OCFS2_FS_STATS is enabled and CONFIG_DEBUG_LOCK_ALLOC is disabled. Statistics now look like - ocfs2_write_ctxt: 2144 - 2136 = 8 ocfs2_inode_info: 1960 - 1848 = 112 ocfs2_journal: 168 - 160 = 8 ocfs2_lock_res: 336 - 304 = 32 ocfs2_refcount_tree: 512 - 472 = 40 Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Some tiny bug fixes for discontiguous block allocation.Tao Ma2010-04-221-1/+1
| | | | | | | | | | | | The fixes include: 1. some endian problems. 2. we should use bit/bpc in ocfs2_block_group_grow_discontig to allocate clusters. 3. set num_clusters properly in __ocfs2_claim_clusters. 4. change name from ocfs2_supports_discontig_bh to ocfs2_supports_discontig_bg. Signed-off-by: Tao Ma <tao.ma@oracle.com>
* ocfs2: Allocate discontiguous block groups.Joel Becker2010-04-131-0/+7
| | | | | | | | If we cannot get a contiguous region for a block group, allocate a discontiguous one when the filesystem supports it. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
* ocfs2: Add dir_resv_level mount optionMark Fasheh2010-05-051-0/+1
| | | | | | | | | The default behavior for directory reservations stays the same, but we add a mount option so people can tweak the size of directory reservations according to their workloads. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: increase the default size of local alloc windowsMark Fasheh2010-05-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have observed that the current size of 8M gives us pretty poor fragmentation on multi-threaded workloads which do lots of writes. Generally, I can increase the size of local alloc windows and observe a marked decrease in fragmentation, even up and beyond window sizes of 512 megabytes. This makes sense for a couple reasons - larger local alloc means more room for reservation windows. On multi-node workloads the larger local alloc helps as well because we don't have to do window slides as often. Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no longer used and the comment above it was out of date. To test fragmentation, I used a workload which launched 4 threads that did 4k writes into a series of about 140 alternating files. With resv_level=2, and a 4k/4k file system I observed the following average fragmentation for various localalloc= parameters: localalloc= avg. fragmentation 8 48 32 16 64 10 120 7 On larger cluster sizes, the difference is more dramatic. The new default size top out at 256M, which we'll only get for cluster sizes of 32K and above. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: clean up localalloc mount option size parsingMark Fasheh2010-05-051-0/+6
| | | | | | | | | | | | | | | | | This patch pulls the local alloc sizing code into localalloc.c and provides a callout to it from ocfs2_fill_super(). Behavior is essentially unchanged except that I correctly calculate the maximum local alloc size. The old code in ocfs2_parse_options() calculated the max size as: ocfs2_local_alloc_size(sb) * 8 which is correct, in bits. Unfortunately though the option passed in is in megabytes. Ultimately, this bug made no real difference - the shrink code would catch a too-large size and bring it down to something reasonable. Still, it's less than efficient as-is. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: allocation reservationsMark Fasheh2010-05-051-0/+5
| | | | | | | | | | | | | | | | | | | | This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Clear undo bits when local alloc is freedMark Fasheh2010-03-231-2/+12
| | | | | | | | | | | | | | When the local alloc file changes windows, unused bits are freed back to the global bitmap. By defnition, those bits can not be in use by any file. Also, the local alloc will never have been able to allocate those bits if they were part of a previous truncate. Therefore it makes sense that we should clear unused local alloc bits in the undo buffer so that they can be used immediatly. [ Modified to call it ocfs2_release_clusters() -- Joel ] Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* Ocfs2: Move ocfs2 ioctl definitions from ocfs2_fs.h to newly added ocfs2_ioctl.hTristan Ye2010-03-021-0/+1
| | | | | | | | | | | | | | | Currently we were adding ioctl cmds/structures for ocfs2 into ocfs2_fs.h which was used for define ocfs2 on-disk layout. That sounds a little bit confusing, and it may be quickly polluted espcially when growing the ocfs2_info_request ioctls afterwards(it will grow i bet). As a result, such OCFS2 IOCs do need to be placed somewhere other than ocfs2_fs.h, a separated ocfs2_ioctl.h will be added to store such ioctl structures and definitions which could also be used from userspace to invoke ioctls call. Signed-off-by: Tristan Ye <tristan.ye@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Attach the connection to the lksbJoel Becker2010-02-261-1/+1
| | | | | | | We're going to want it in the ast functions, so we convert union ocfs2_dlm_lksb to struct ocfs2_dlm_lksb and let it carry the connection. Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: add extent block stealing for ocfs2 v5Tiger Yang2010-02-261-27/+2
| | | | | | | | | | | This patch add extent block (metadata) stealing mechanism for extent allocation. This mechanism is same as the inode stealing. if no room in slot specific extent_alloc, we will try to allocate extent block from the next slot. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Acked-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Prevent a livelock in dlmglueSunil Mushran2010-02-021-0/+4
| | | | | | | | | | | | | | | | | There is possibility of a livelock in __ocfs2_cluster_lock(). If a node were to get an ast for an upconvert request, followed immediately by a bast, there is a small window where the fs may downconvert the lock before the process requesting the upconvert is able to take the lock. This patch adds a new flag to indicate that the upconvert is still in progress and that the dc thread should not downconvert it right now. Wengang Wang <wen.gang.wang@oracle.com> and Joel Becker <joel.becker@oracle.com> contributed heavily to this patch. Reported-by: David Teigland <teigland@redhat.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2009-12-241-3/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c ocfs2/trivial: Use proper mask for 2 places in hearbeat.c Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink. Ocfs2: Should ocfs2 support fiemap for S_IFDIR inode? ocfs2: Use FIEMAP_EXTENT_SHARED fiemap: Add new extent flag FIEMAP_EXTENT_SHARED ocfs2: replace u8 by __u8 in ocfs2_fs.h ocfs2: explicit declare uninitialized var in user_cluster_connect() ocfs2-devel: remove redundant OCFS2_MOUNT_POSIX_ACL check in ocfs2_get_acl_nolock() ocfs2: return -EAGAIN instead of EAGAIN in dlm ocfs2/cluster: Make fence method configurable - v2 ocfs2: Set MS_POSIXACL on remount ocfs2: Make acl use the default ocfs2: Always include ACL support
| * ocfs2: Make acl use the defaultJan Kara2009-10-281-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | Change acl mount options handling to match the one of XFS and BTRFS and hopefully it is also easier to use now. When admin does not specify any acl mount option, acls are enabled if and only if the filesystem has xattr feature enabled. If admin specifies 'acl' mount option, we fail the mount if the filesystem does not have xattr feature and thus acls cannot be enabled. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* | ocfs2: Trivial cleanup of jbd compatibility layer removalSunil Mushran2009-11-131-6/+1
|/ | | | | | | | | Mainline commit 53ef99cad9878f02f27bb30bc304fc42af8bdd6e removed the JBD compatibility layer from OCFS2. This patch removes the last remaining remnants of that. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Add functions for extents refcounted.Tao Ma2009-09-221-0/+7
| | | | | | | Add function ocfs2_mark_extent_refcounted which can mark an extent refcounted. Signed-off-by: Tao Ma <tao.ma@oracle.com>
* ocfs2: Add refcount tree lock mechanism.Tao Ma2009-09-221-0/+4
| | | | | | | | | | | | | | | | | Implement locking around struct ocfs2_refcount_tree. This protects all read/write operations on refcount trees. ocfs2_refcount_tree has its own lock and its own caching_info, protecting buffers among multiple nodes. User must call ocfs2_lock_refcount_tree before his operation on the tree and unlock it after that. ocfs2_refcount_trees are referenced by the block number of the refcount tree root block, So we create an rb-tree on the ocfs2_super to look them up. Signed-off-by: Tao Ma <tao.ma@oracle.com>
* ocfs2: Add ocfs2_read_refcount_block.Tao Ma2009-09-221-0/+3
| | | | Signed-off-by: Tao Ma <tao.ma@oracle.com>
* ocfs2: Pass struct ocfs2_caching_info to the journal functions.Joel Becker2009-09-041-1/+7
| | | | | | | | | | | | | The next step in divorcing metadata I/O management from struct inode is to pass struct ocfs2_caching_info to the journal functions. Thus the journal locks a metadata cache with the cache io_lock function. It also can compare ci_last_trans and ci_created_trans directly. This is a large patch because of all the places we change ocfs2_journal_access..(handle, inode, ...) to ocfs2_journal_access..(handle, INODE_CACHE(inode), ...). Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: move ip_created_trans to struct ocfs2_caching_infoJoel Becker2009-09-041-0/+3
| | | | | | | | | | | | | Similar ip_last_trans, ip_created_trans tracks the creation of a journal managed inode. This specifically tracks what transaction created the inode. This is so the code can know if the inode has ever been written to disk. This behavior is desirable for any journal managed object. We move it to struct ocfs2_caching_info as ci_created_trans so that any object using ocfs2_caching_info can rely on this behavior. Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: move ip_last_trans to struct ocfs2_caching_infoJoel Becker2009-09-041-0/+4
| | | | | | | | | | | | We have the read side of metadata caching isolated to struct ocfs2_caching_info, now we need the write side. This means the journal functions. The journal only does a couple of things with struct inode. This change moves the ip_last_trans field onto struct ocfs2_caching_info as ci_last_trans. This field tells the journal whether a pending journal flush is required. Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Change metadata caching locks to an operations structure.Joel Becker2009-09-041-4/+4
| | | | | | | | | We don't really want to cart around too many new fields on the ocfs2_caching_info structure. So let's wrap all our access of the parent object in a set of operations. One pointer on caching_info, and more flexibility to boot. Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Make the ocfs2_caching_info structure self-contained.Joel Becker2009-09-041-2/+21
| | | | | | | | | | | | We want to use the ocfs2_caching_info structure in places that are not inodes. To do that, it can no longer rely on referencing the inode directly. This patch moves the flags to ocfs2_caching_info->ci_flags, stores pointers to the parent's locks on the ocfs2_caching_info, and renames the constants and flags to reflect its independant state. Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Fix deadlock on umountJan Kara2009-07-211-4/+18
| | | | | | | | | | | | | | | | | | In commit ea455f8ab68338ba69f5d3362b342c115bea8e13, we moved the dentry lock put process into ocfs2_wq. This causes problems during umount because ocfs2_wq can drop references to inodes while they are being invalidated by invalidate_inodes() causing all sorts of nasty things (invalidate_inodes() ending in an infinite loop, "Busy inodes after umount" messages etc.). We fix the problem by stopping ocfs2_wq from doing any further releasing of inode references on the superblock being unmounted, wait until it finishes the current round of releasing and finally cleaning up all the references in dentry_lock_list from ocfs2_put_super(). The issue was tracked down by Tao Ma <tao.ma@oracle.com>. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Add lockdep annotationsJan Kara2009-06-221-0/+4
| | | | | | | | | | Add lockdep support to OCFS2. The support also covers all of the cluster locks except for open locks, journal locks, and local quotafile locks. These are special because they are acquired for a node, not for a particular process and lockdep cannot deal with such type of locking. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Stop orphan scan as early as possible during umountSunil Mushran2009-06-221-0/+6
| | | | | | | | | | | Currently if the orphan scan fires a tick before the user issues the umount, the umount will wait for the queued orphan scan tasks to complete. This patch makes the umount stop the orphan scan as early as possible so as to reduce the probability of the queued tasks slowing down the umount. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Add statistics for the checksum and ecc operations.Joel Becker2009-06-031-0/+4
| | | | | | | | | | | | | It would be nice to know how often we get checksum failures. Even better, how many of them we can fix with the single bit ecc. So, we add a statistics structure. The structure can be installed into debugfs wherever the user wants. For ocfs2, we'll put it in the superblock-specific debugfs directory and pass it down from our higher-level functions. The stats are only registered with debugfs when the filesystem supports metadata ecc. Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2 patch to track delayed orphan scan timer statisticsSrinivas Eeda2009-06-031-1/+3
| | | | | | | | | | Patch to track delayed orphan scan timer statistics. Modifies ocfs2_osb_dump to print the following: Orphan Scan=> Local: 10 Global: 21 Last Scan: 67 seconds ago Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: timer to queue scan of all orphan slotsSrinivas Eeda2009-06-031-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | When a dentry is unlinked, the unlinking node takes an EX on the dentry lock before moving the dentry to the orphan directory. Other nodes that have this dentry in cache have a PR on the same dentry lock. When the EX is requested, the other nodes flag the corresponding inode as MAYBE_ORPHANED during downconvert. The inode is finally deleted when the last node to iput the inode sees that i_nlink==0 and the MAYBE_ORPHANED flag is set. A problem arises if a node is forced to free dentry locks because of memory pressure. If this happens, the node will no longer get downconvert notifications for the dentries that have been unlinked on another node. If it also happens that node is actively using the corresponding inode and happens to be the one performing the last iput on that inode, it will fail to delete the inode as it will not have the MAYBE_ORPHANED flag set. This patch fixes this shortcoming by introducing a periodic scan of the orphan directories to delete such inodes. Care has been taken to distribute the workload across the cluster so that no one node has to perform the task all the time. Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: recover orphans in offline slots during recovery and mountSrinivas Eeda2009-04-031-0/+2
| | | | | | | | | | | | | | | | | During recovery, a node recovers orphans in it's slot and the dead node(s). But if the dead nodes were holding orphans in offline slots, they will be left unrecovered. If the dead node is the last one to die and is holding orphans in other slots and is the first one to mount, then it only recovers it's own slot, which leaves orphans in offline slots. This patch queues complete_recovery to clean orphans for all offline slots during mount and node recovery. Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: fix rare stale inode errors when exporting via nfswengang wang2009-04-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Optimize inode group allocation by recording last used group.Tao Ma2009-04-031-0/+3
| | | | | | | | | | | | | | | | | | In ocfs2, the block group search looks for the "emptiest" group to allocate from. So if the allocator has many equally(or almost equally) empty groups, new block group will tend to get spread out amongst them. So we add osb_inode_alloc_group in ocfs2_super to record the last used inode allocation group. For more details, please see http://oss.oracle.com/osswiki/OCFS2/DesignDocs/InodeAllocationStrategy. I have done some basic test and the results are a ten times improvement on some cold-cache stat workloads. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: fix leaf start calculation in ocfs2_dx_dir_rebalance()Mark Fasheh2009-04-031-0/+10
| | | | | | | | | | | | ocfs2_dx_dir_rebalance() is passed the block offset of a dx leaf which needs rebalancing. Since we rebalance an entire cluster at a time however, this function needs to calculate the beginning of that cluster, in blocks. The calculation was wrong, which would result in a read of non-leaf blocks. Fix the calculation by adding ocfs2_block_to_cluster_start() which is a more straight-forward way of determining this. Reported-by: Tristan Ye <tristan.ye@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Increase max links countMark Fasheh2009-04-031-0/+38
| | | | | | | | | Since we've now got a directory format capable of handling a large number of entries, we can increase the maximum link count supported. This only gets increased if the directory indexing feature is turned on. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Add a name indexed b-tree to directory inodesMark Fasheh2009-04-031-0/+16
| | | | | | | | | | | | | | | | This patch makes use of Ocfs2's flexible btree code to add an additional tree to directory inodes. The new tree stores an array of small, fixed-length records in each leaf block. Each record stores a hash value, and pointer to a block in the traditional (unindexed) directory tree where a dirent with the given name hash resides. Lookup exclusively uses this tree to find dirents, thus providing us with constant time name lookups. Some of the hashing code was copied from ext3. Unfortunately, it has lots of unfixed checkpatch errors. I left that as-is so that tracking changes would be easier. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Remove debugfs file local_alloc_statsSunil Mushran2009-04-031-5/+0
| | | | | | | | This patch removes the debugfs file local_alloc_stats as that information is now included in the fs_state debugfs file. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Expose the file system state via debugfsSunil Mushran2009-04-031-0/+1
| | | | | | | | | | This patch creates a per mount debugfs file, fs_state, which exposes information like, cluster stack in use, states of the downconvert, recovery and commit threads, number of journal txns, some allocation stats, list of all slots, etc. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
OpenPOWER on IntegriCloud