summaryrefslogtreecommitdiffstats
path: root/fs/jffs2/dir.c
Commit message (Collapse)AuthorAgeFilesLines
* fs/vfs/security: pass last path component to LSM on inode creationEric Paris2011-02-011-5/+4
| | | | | | | | | | | | | | | | | | | SELinux would like to implement a new labeling behavior of newly created inodes. We currently label new inodes based on the parent and the creating process. This new behavior would also take into account the name of the new object when deciding the new label. This is not the (supposed) full path, just the last component of the path. This is very useful because creating /etc/shadow is different than creating /etc/passwd but the kernel hooks are unable to differentiate these operations. We currently require that userspace realize it is doing some difficult operation like that and than userspace jumps through SELinux hoops to get things set up correctly. This patch does not implement new behavior, that is obviously contained in a seperate SELinux patch, but it does pass the needed name down to the correct LSM hook. If no such name exists it is fine to pass NULL. Signed-off-by: Eric Paris <eparis@redhat.com>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2010-10-301-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (82 commits) mtd: fix build error in m25p80.c mtd: Remove redundant mutex from mtd_blkdevs.c MTD: Fix wrong check register_blkdev return value Revert "mtd: cleanup Kconfig dependencies" mtd: cfi_cmdset_0002: make sector erase command variable mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one block2mtd: dubious assignment P4080/mtd: Fix the freescale lbc issue with 36bit mode P4080/eLBC: Make Freescale elbc interrupt common to elbc devices mtd: phram: use KBUILD_MODNAME mtd: OneNAND: S5PC110: Fix double call suspend & resume function mtd: nand: fix MTD_MODE_RAW writes jffs2: use kmemdup mtd: sm_ftl: cosmetic, use bool when possible mtd: r852: remove useless pci powerup/down from suspend/resume routines mtd: blktrans: fix a race vs kthread_stop mtd: blktrans: kill BKL mtd: allow to unload the mtdtrans module if its block devices aren't open ... Fix up trivial whitespace-introduced conflict in drivers/mtd/mtdchar.c
| * jffs2: use kmemdupJulia Lawall2010-10-251-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert a sequence of kmalloc and memcpy to use kmemdup. The semantic patch that performs this transformation is: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,flag,len; expression arg,e1,e2; statement S; @@ a = - \(kmalloc\|kzalloc\)(len,flag) + kmemdup(arg,len,flag) <... when != a if (a == NULL || ...) S ...> - memcpy(a,arg,len+1); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | new helper: ihold()Al Viro2010-10-251-2/+2
|/ | | | | | Clones an existing reference to inode; caller must already hold one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2010-08-101-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (79 commits) mtd: Remove obsolete <mtd/compatmac.h> include mtd: Update copyright notices jffs2: Update copyright notices mtd-physmap: add support users can assign the probe type in board files mtd: remove redwood map driver mxc_nand: Add v3 (i.MX51) Support mxc_nand: support 8bit ecc mxc_nand: fix correct_data function mxc_nand: add V1_V2 namespace to registers mxc_nand: factor out a check_int function mxc_nand: make some internally used functions overwriteable mxc_nand: rework get_dev_status mxc_nand: remove 0xe00 offset from registers mtd: denali: Add multi connected NAND support mtd: denali: Remove set_ecc_config function mtd: denali: Remove unuseful code in get_xx_nand_para functions mtd: denali: Remove device_info_tag structure mtd: m25p80: add support for the Winbond W25Q32 SPI flash chip mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chips mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chips ... Fix up trivial conflicts in drivers/mtd/maps/{Kconfig,redwood.c} due to redwood driver removal.
| * jffs2: Update copyright noticesDavid Woodhouse2010-08-081-0/+1
| | | | | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | jffs2: don't open-code iget_failed()Al Viro2010-08-091-12/+4
|/ | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* jffs2: Fix NFS race by using insert_inode_locked()David Woodhouse2010-06-031-2/+10
| | | | | | | | | New inodes need to be locked as we're creating them, so they don't get used by other things (like NFSd) before they're ready. Pointed out by Al Viro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* jffs2: Fix in-core inode leaks on error pathsDavid Woodhouse2010-06-031-59/+56
| | | | | | Pointed out by Al Viro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* jffs2/jfs/xfs: switch over to 'check_acl' rather than 'permission()'Linus Torvalds2009-09-081-1/+1
| | | | | | | | | | | This avoids an indirect call in the VFS for each path component lookup. Well, at least as long as you own the directory in question, and the ACL check is unnecessary. Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] fix ->llseek for more directoriesChristoph Hellwig2008-10-231-1/+2
| | | | | | | With this patch all directory fops instances that have a readdir that doesn't take the BKL are switched to generic_file_llseek. Signed-off-by: Christoph Hellwig <hch@lst.de>
* [JFFS2] Use d_splice_alias() not d_add() in jffs2_lookup()David Woodhouse2008-10-231-3/+1
| | | | | | | Now that JFFS2 can be exported by NFS, we need to get this right. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [JFFS2] Correct symlink name too long error codeAdrian Hunter2008-08-141-1/+1
| | | | | Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [JFFS2] Use .unlocked_ioctlStoyan Gaydarov2008-07-111-1/+1
| | | | | | | This changes the .ioctl to the .unlocked_ioctl version. Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [JFFS2] Track parent inode for directories (for NFS export)David Woodhouse2008-05-011-10/+25
| | | | | | | | To support NFS export, we need to know the parent inode of directories. Rather than growing the jffs2_inode_cache structure, share space with the nlink field -- which was always set to 1 for directories anyway. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [JFFS2] Quiet lockdep false positive.David Woodhouse2008-05-011-0/+7
| | | | | | | | | Don't hold f->sem while calling into jffs2_do_create(). It makes lockdep unhappy, and we don't really need it -- the _reason_ it's a false positive is because nobody else can see this inode yet and so nobody will be trying to lock it anyway. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [JFFS2] semaphore->mutex conversionDavid Woodhouse2008-04-221-29/+29
| | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* iget: stop JFFS2 from using iget() and read_inode()David Howells2008-02-071-3/+3
| | | | | | | | | | | | | | | | Stop the JFFS2 filesystem from using iget() and read_inode(). Replace jffs2_read_inode() with jffs2_iget(), and call that instead of iget(). jffs2_iget() then uses iget_locked() directly and returns a proper error code instead of an inode in the event of an error. jffs2_do_fill_super() returns any error incurred when getting the root inode instead of EINVAL. Signed-off-by: David Howells <dhowells@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [JFFS2] Tidy up fix for ACL/permissions problem.KaiGai Kohei2007-10-201-28/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | [In commit 9ed437c50d89eabae763dd422579f73fdebf288d we fixed a problem with standard permissions on newly-created inodes, when POSIX ACLs are enabled. This cleans it up...] The attached patch separate jffs2_init_acl() into two parts. The one is jffs2_init_acl_pre() called from jffs2_new_inode(). It compute ACL oriented inode->i_mode bits, and allocate in-memory ACL objects associated with the new inode just before when inode meta infomation is written to the medium. The other is jffs2_init_acl_post() called from jffs2_symlink(), jffs2_mkdir(), jffs2_mknod() and jffs2_do_create(). It actually writes in-memory ACL objects into the medium next to the success of writing meta-information. In the current implementation, we have to write a same inode meta infomation twice when inode->i_mode is updated by the default ACL. However, we can avoid the behavior by putting an updated i_mode before it is written at first, as jffs2_init_acl_pre() doing. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [JFFS2] Fix ACL vs. mode handling.David Woodhouse2007-08-221-10/+23
| | | | | | | | | When POSIX ACL support was enabled, we weren't writing correct legacy modes to the medium on inode creation, or when the ACL was set. This meant that the permissions would be incorrect after the file system was remounted. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [JFFS2] Whitespace cleanups.David Woodhouse2007-07-101-2/+2
| | | | | | Convert many spaces to tabs; one or two other minor cosmetic fixes. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [JFFS2] Tidy up licensing/copyright boilerplate.David Woodhouse2007-04-251-3/+1
| | | | | | | | | | | | | | In particular, remove the bit in the LICENCE file about contacting Red Hat for alternative arrangements. Their errant IS department broke that arrangement a long time ago -- the policy of collecting copyright assignments from contributors came to an end when the plug was pulled on the servers hosting the project, without notice or reason. We do still dual-license it for use with eCos, with the GPL+exception licence approved by the FSF as being GPL-compatible. It's just that nobody has the right to license it differently. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [PATCH] remove many unneeded #includes of sched.hTim Schmielau2007-02-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] mark struct inode_operations const 2Arjan van de Ven2007-02-121-1/+1
| | | | | | | | | | | Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] struct path: convert jffs2Josef Sipek2006-12-081-3/+3
| | | | | | Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] r/o bind mount prepwork: inc_nlink() helperDave Hansen2006-10-011-3/+3
| | | | | | | | | | | This is mostly included for parity with dec_nlink(), where we will have some more hooks. This one should stay pretty darn straightforward for now. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] r/o bind mounts: unlink: monitor i_nlinkDave Hansen2006-10-011-3/+3
| | | | | | | | | | | | | | | | | When a filesystem decrements i_nlink to zero, it means that a write must be performed in order to drop the inode from the filesystem. We're shortly going to have keep filesystems from being remounted r/o between the time that this i_nlink decrement and that write occurs. So, add a little helper function to do the decrements. We'll tie into it in a bit to note when i_nlink hits zero. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [JFFS2] Remove flash offset argument from various functions.David Woodhouse2006-05-231-20/+20
| | | | | | | | We don't need the upper layers to deal with the physical offset. It's _always_ c->nextblock->offset + c->sector_size - c->nextblock->free_size so we might as well just let the actual write functions deal with that. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* Merge git://git.infradead.org/jffs2-xattr-2.6David Woodhouse2006-05-201-6/+56
|\ | | | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
| * [JFFS2][XATTR] XATTR support on JFFS2 (version. 5)KaiGai Kohei2006-05-131-6/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This attached patches provide xattr support including POSIX-ACL and SELinux support on JFFS2 (version.5). There are some significant differences from previous version posted at last December. The biggest change is addition of EBS(Erase Block Summary) support. Currently, both kernel and usermode utility (sumtool) can recognize xattr nodes which have JFFS2_NODETYPE_XATTR/_XREF nodetype. In addition, some bugs are fixed. - A potential race condition was fixed. - Unexpected fail when updating a xattr by same name/value pair was fixed. - A bug when removing xattr name/value pair was fixed. The fundamental structures (such as using two new nodetypes and exclusion mechanism by rwsem) are unchanged. But most of implementation were reviewed and updated if necessary. Espacially, we had to change several internal implementations related to load_xattr_datum() to avoid a potential race condition. [1/2] xattr_on_jffs2.kernel.version-5.patch [2/2] xattr_on_jffs2.utils.version-5.patch Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Support new device nodesDavid Woodhouse2006-05-191-7/+5
|/ | | | | | | | | | | | | | | Device node major/minor numbers are just stored in the payload of a single data node. Just extend that to 4 bytes and use new_encode_dev() for it. We only use the 4-byte format if we _need_ to, if !old_valid_dev(foo). This preserves backwards compatibility with older code as much as possible. If we do make devices with major or minor numbers above 255, and then mount the file system with the old code, it'll just read the first two bytes and get the numbers wrong. If it comes to garbage-collect it, it'll then write back those wrong numbers. But that's about the best we can expect. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* Move jffs2_fs_i.h and jffs2_fs_sb.h from include/linux/ to fs/jffs2/David Woodhouse2006-05-031-2/+2
| | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* JFFS2: Return an error for long filenamesRichard Purdie2006-04-181-0/+3
| | | | | | | Return an error if a name is too long for JFFS2 rather than corrupting data. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
* [PATCH] Make most file operations structs in fs/ constArjan van de Ven2006-03-281-1/+1
| | | | | | | | | | | | | | This is a conversion to make the various file_operations structs in fs/ const. Basically a regexp job, with a few manual fixups The goal is both to increase correctness (harder to accidentally write to shared datastructures) and reducing the false sharing of cachelines with things that get dirty in .data (while .rodata is nicely read only and thus cache clean) Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [JFFS2] Clean up trailing white spacesThomas Gleixner2005-11-071-37/+37
| | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [JFFS2] Add erase block summary support (mount time improvement)Ferenc Havasi2005-11-061-7/+13
| | | | | | | | | | | | | | | | | | The goal of summary is to speed up the mount time. Erase block summary (EBS) stores summary information at the end of every (closed) erase block. It is no longer necessary to scan all nodes separetly (and read all pages of them) just read this "small" summary, where every information is stored which is needed at mount time. This summary information is stored in a JFFS2_FEATURE_RWCOMPAT_DELETE. During the mount process if there is no summary info the orignal scan process will be executed. EBS works with NAND and NOR flashes, too. There is a user space tool called sumtool to generate this summary information for a JFFS2 image. Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [JFFS2] Fix JFFS2 [mc]time handlingArtem B. Bityutskiy2005-11-061-5/+16
| | | | | | | From: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [JFFS2] Use f->target instead of f->dents for symlink targetArtem B. Bityutskiy2005-11-061-6/+6
| | | | | | | | | | JFFS2 uses f->dents to store the pointer to the symlink target string (in case the inode is symlink). This is somewhat ugly to use the same field for different reasons. Introduce distinct field f->target for this purpose. Note, f->fragtree, f->dents, f->target may probably be put in a union. Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [JFFS2] Remove compatibilty cruft for ancient kernelsDavid Woodhouse2005-07-061-15/+5
| | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [JFFS2] Add symlink caching support.Artem B. Bityuckiy2005-05-231-7/+21
| | | | | Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+799
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud