summaryrefslogtreecommitdiffstats
path: root/fs/dlm
Commit message (Collapse)AuthorAgeFilesLines
* dlm: fix lvb invalidation conditionsDavid Teigland2012-11-163-10/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a node is removed that held a PW/EX lock, the existing master node should invalidate the lvb on the resource due to the purged lock. Previously, the existing master node was invalidating the lvb if it found only NL/CR locks on the resource during recovery for the removed node. This could lead to cases where it invalidated the lvb and shouldn't have, or cases where it should have invalidated and didn't. When recovery selects a *new* master node for a resource, and that new master finds only NL/CR locks on the resource after lock recovery, it should invalidate the lvb. This case was handled correctly (but was incorrectly applied to the existing master case also.) When a process exits while holding a PW/EX lock, the lvb on the resource should be invalidated. This was not happening. The lvb contents and VALNOTVALID flag should be recovered before granting locks in recovery so that the recovered lvb state is provided in the callback. The lvb was being recovered after the lock was granted. Signed-off-by: David Teigland <teigland@redhat.com>
* fs/dlm: remove CONFIG_EXPERIMENTALKees Cook2012-11-011-1/+1
| | | | | | | | | | This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Christine Caulfield <ccaulfie@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: remove unused variable in *dlm_lowcomms_get_buffer()Wei Yongjun2012-11-011-3/+2
| | | | | | | | | | | The variable users is initialized but never used otherwise, so remove the unused variable. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David Teigland <teigland@redhat.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2012-10-021-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking changes from David Miller: 1) GRE now works over ipv6, from Dmitry Kozlov. 2) Make SCTP more network namespace aware, from Eric Biederman. 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko. 4) Make openvswitch network namespace aware, from Pravin B Shelar. 5) IPV6 NAT implementation, from Patrick McHardy. 6) Server side support for TCP Fast Open, from Jerry Chu and others. 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel Borkmann. 8) Increate the loopback default MTU to 64K, from Eric Dumazet. 9) Use a per-task rather than per-socket page fragment allocator for outgoing networking traffic. This benefits processes that have very many mostly idle sockets, which is quite common. From Eric Dumazet. 10) Use up to 32K for page fragment allocations, with fallbacks to smaller sizes when higher order page allocations fail. Benefits are a) less segments for driver to process b) less calls to page allocator c) less waste of space. From Eric Dumazet. 11) Allow GRO to be used on GRE tunnels, from Eric Dumazet. 12) VXLAN device driver, one way to handle VLAN issues such as the limitation of 4096 VLAN IDs yet still have some level of isolation. From Stephen Hemminger. 13) As usual there is a large boatload of driver changes, with the scale perhaps tilted towards the wireless side this time around. Fix up various fairly trivial conflicts, mostly caused by the user namespace changes. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits) hyperv: Add buffer for extended info after the RNDIS response message. hyperv: Report actual status in receive completion packet hyperv: Remove extra allocated space for recv_pkt_list elements hyperv: Fix page buffer handling in rndis_filter_send_request() hyperv: Fix the missing return value in rndis_filter_set_packet_filter() hyperv: Fix the max_xfer_size in RNDIS initialization vxlan: put UDP socket in correct namespace vxlan: Depend on CONFIG_INET sfc: Fix the reported priorities of different filter types sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP sfc: Fix loopback self-test with separate_tx_channels=1 sfc: Fix MCDI structure field lookup sfc: Add parentheses around use of bitfield macro arguments sfc: Fix null function pointer in efx_sriov_channel_type vxlan: virtual extensible lan igmp: export symbol ip_mc_leave_group netlink: add attributes to fdb interface tg3: unconditionally select HWMON support when tg3 is enabled. Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" gre: fix sparse warning ...
| * netlink: Rename pid to portid to avoid confusionEric W. Biederman2012-09-101-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dlm: check the maximum size of a request from userSasha Levin2012-09-101-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | device_write only checks whether the request size is big enough, but it doesn't check if the size is too big. At that point, it also tries to allocate as much memory as the user has requested even if it's too much. This can lead to OOM killer kicking in, or memory corruption if (count + 1) overflows. Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: cleanup send_to_sock routineYing Xue2012-08-131-4/+1
| | | | | | | | | | | | | | Remove unnecessary code form send_to_sock routine. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: convert add_sock routine return value type to voidYing Xue2012-08-101-2/+1
| | | | | | | | | | | | | | | | Since add_sock() always returns a success code - 0, its return value type should be changed from integer to void. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: remove redundant variable assignmentsXue Ying2012-08-101-2/+0
| | | | | | | | | | | | | | | | | | | | | | Once the tcp_create_listen_sock() is returned successfully, we will invoke add_sock() immediately. In add_sock(), the 'con' variable is assigned to 'sk_user_data', meanwhile, the 'sock' is also set to 'con->sock'. So it's unnecessary to do the same thing in tcp_create_listen_sock(). Signed-off-by: Xue Ying <ying.xue@windriver.com> Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: fix unlock balance warningsDavid Teigland2012-08-086-30/+78
| | | | | | | | | | | | | | | | | | | | The in_recovery rw_semaphore has always been acquired and released by different threads by design. To work around the "BUG: bad unlock balance detected!" messages, adjust things so the dlm_recoverd thread always does both down_write and up_write. Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: fix uninitialized spinlockDavid Teigland2012-08-081-2/+2
| | | | | | | | | | | | Use DEFINE_SPINLOCK for global dlm_cb_seq_spin. Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: fix deadlock between dlm_send and dlm_controldDavid Teigland2012-08-085-90/+200
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A deadlock sometimes occurs between dlm_controld closing a lowcomms connection through configfs and dlm_send looking up the address for a new connection in configfs. dlm_controld does a configfs rmdir which calls dlm_lowcomms_close which waits for dlm_send to cancel work on the workqueues. The dlm_send workqueue thread has called tcp_connect_to_sock which calls dlm_nodeid_to_addr which does a configfs lookup and blocks on a lock held by dlm_controld in the rmdir path. The solution here is to save the node addresses within the lowcomms code so that the lowcomms workqueue does not need to step through configfs to get a node address. dlm_controld: wait_for_completion+0x1d/0x20 __cancel_work_timer+0x1b3/0x1e0 cancel_work_sync+0x10/0x20 dlm_lowcomms_close+0x4c/0xb0 [dlm] drop_comm+0x22/0x60 [dlm] client_drop_item+0x26/0x50 [configfs] configfs_rmdir+0x180/0x230 [configfs] vfs_rmdir+0xbd/0xf0 do_rmdir+0x103/0x120 sys_rmdir+0x16/0x20 dlm_send: mutex_lock+0x2b/0x50 get_comm+0x34/0x140 [dlm] dlm_nodeid_to_addr+0x18/0xd0 [dlm] tcp_connect_to_sock+0xf4/0x2d0 [dlm] process_send_sockets+0x1d2/0x260 [dlm] worker_thread+0x170/0x2a0 Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: fix missing dir removeDavid Teigland2012-07-161-2/+68
| | | | | | | | | | | | | | | | | | I don't know exactly how, but in some cases, a dir record is not removed, or a new one is created when it shouldn't be. The result is that the dir node lookup returns a master node where the rsb does not exist. In this case, The master node will repeatedly return -EBADR for requests, and the lock requests will be stuck. Until all possible ways for this to happen can be eliminated, a simple and effective way to recover from this situation is for the supposed master node to send a standard remove message to the dir node when it receives a request for a resource it has no rsb for. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: fix conversion deadlock from recoveryDavid Teigland2012-07-162-17/+48
| | | | | | | | | | The process of rebuilding locks on a new master during recovery could re-order the locks on the convert queue, creating an "in place" conversion deadlock that would not be resolved. Fix this by not considering queue order when granting conversions after recovery. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: use wait_event_timeoutDavid Teigland2012-07-161-18/+11
| | | | | | | Use wait_event_timeout to avoid using a timer directly. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: fix race between remove and lookupDavid Teigland2012-07-163-39/+176
| | | | | | | | | | | | | | | It was possible for a remove message on an old rsb to be sent after a lookup message on a new rsb, where the rsbs were for the same resource name. This could lead to a missing directory entry for the new rsb. It is fixed by keeping a copy of the resource name being removed until after the remove has been sent. A lookup checks if this in-progress remove matches the name it is looking up. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: use idr instead of list for recovered rsbsDavid Teigland2012-07-164-23/+101
| | | | | | | | When a large number of resources are being recovered, a linear search of the recover_list takes a long time. Use an idr in place of a list. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: use rsbtbl as resource directoryDavid Teigland2012-07-1614-588/+1215
| | | | | | | | | | | | | | | | | | | Remove the dir hash table (dirtbl), and use the rsb hash table (rsbtbl) as the resource directory. It has always been an unnecessary duplication of information. This improves efficiency by using a single rsbtbl lookup in many cases where both rsbtbl and dirtbl lookups were needed previously. This eliminates the need to handle cases of rsbtbl and dirtbl being out of sync. In many cases there will be memory savings because the dir hash table no longer exists. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: NULL dereference on failure in kmem_cache_create()Dan Carpenter2012-05-151-5/+3
| | | | | | | | We aren't allowed to pass NULL pointers to kmem_cache_destroy() so if both allocations fail, it leads to a NULL dereference. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: fixes for nodir modeDavid Teigland2012-05-029-162/+303
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: improve error and debug messagesDavid Teigland2012-04-264-90/+164
| | | | | | | | | Change some existing error/debug messages to collect more useful information, and add some new error/debug messages to address recently found problems. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: avoid unnecessary search in search_rsbDavid Teigland2012-04-261-0/+3
| | | | | | | | | | If the rsb is found in the "keep" tree, but is not the right type (i.e. not MASTER), we can return immediately with the result. There's no point in going on to search the "toss" list as if we hadn't found it. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: limit rcom debug messagesDavid Teigland2012-04-262-28/+28
| | | | | | | | | Unify the checking for both types of ignored rcom messages, and replace the two log_debug statements with a single, rate limited debug message. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: fix waiter recoveryDavid Teigland2012-04-261-12/+31
| | | | | | | | | | | | An outstanding remote operation (an lkb on the "waiter" list) could sometimes miss being resent during recovery. The decision was based on the lkb_nodeid field, which could have changed during an earlier aborted recovery, so it no longer represents the actual remote destination. The lkb_wait_nodeid is always the actual remote node, so it is the best value to use. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: prevent connections during shutdownDavid Teigland2012-04-261-8/+20
| | | | | | | | | | | | | | | During lowcomms shutdown, a new connection could possibly be created, and attempt to use a workqueue that's been destroyed. Similarly, during startup, a new connection could attempt to use a workqueue that's not been set up yet. Add a global variable to indicate when new connections are allowed. Based on patch by: Christine Caulfield <ccaulfie@redhat.com> Reported-by: dann frazier <dann.frazier@canonical.com> Reviewed-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: David Teigland <teigland@redhat.com>
* Merge tag 'dlm-fixes-3.4' of ↵Linus Torvalds2012-04-231-0/+12
|\ | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm fixes from David Teigland: "This includes one short patch fixing the behavior of the QUECVT flag, which the gfs2 folks are waiting on." * tag 'dlm-fixes-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: fix QUECVT when convert queue is empty
| * dlm: fix QUECVT when convert queue is emptyDavid Teigland2012-04-231-0/+12
| | | | | | | | | | | | | | | | The QUECVT flag should not prevent conversions from being granted immediately when the convert queue is empty. Signed-off-by: David Teigland <teigland@redhat.com>
* | simple_open: automatically convert to simple_open()Stephen Boyd2012-04-051-8/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'dlm-3.4' of ↵Linus Torvalds2012-03-214-5/+25
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates for 3.4 from David Teigland: "This set includes one trivial fix, and one simple recovery speed up. Directory recovery can use the standard hash table to find resources rather than always searching the linear recovery list." * tag 'dlm-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: last element of dlm_local_addr[] never used dlm: fix slow rsb search in dir recovery
| * dlm: last element of dlm_local_addr[] never usedDavid Teigland2012-03-211-1/+1
| | | | | | | | | | | | | | | | The last element of dlm_local_addr[DLM_MAX_ADDR_COUNT] was not used because the loop ended at COUNT - 1. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Teigland <teigland@redhat.com>
| * dlm: fix slow rsb search in dir recoveryDavid Teigland2012-03-083-4/+24
| | | | | | | | | | | | | | | | | | The function used to find an rsb during directory recovery was searching the single linear list of rsb's. This wasted a lot of time compared to using the standard hash table to find the rsb. Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: Do not allocate a fd for peeloffBenjamin Poirier2012-03-081-14/+8
|/ | | | | | | | | avoids allocating a fd that a) propagates to every kernel thread and usermodehelper b) is not properly released. References: http://article.gmane.org/gmane.linux.network.drbd/22529 Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-linus' of ↵Linus Torvalds2012-01-1014-263/+873
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: add recovery callbacks dlm: add node slots and generation dlm: move recovery barrier calls dlm: convert rsb list to rb_tree
| * dlm: add recovery callbacksDavid Teigland2012-01-048-163/+263
| | | | | | | | | | | | | | | | | | | | | | | | | | These new callbacks notify the dlm user about lock recovery. GFS2, and possibly others, need to be aware of when the dlm will be doing lock recovery for a failed lockspace member. In the past, this coordination has been done between dlm and file system daemons in userspace, which then direct their kernel counterparts. These callbacks allow the same coordination directly, and more simply. Signed-off-by: David Teigland <teigland@redhat.com>
| * dlm: add node slots and generationDavid Teigland2012-01-047-29/+480
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Slot numbers are assigned to nodes when they join the lockspace. The slot number chosen is the minimum unused value starting at 1. Once a node is assigned a slot, that slot number will not change while the node remains a lockspace member. If the node leaves and rejoins it can be assigned a new slot number. A new generation number is also added to a lockspace. It is set and incremented during each recovery along with the slot collection/assignment. The slot numbers will be passed to gfs2 which will use them as journal id's. Signed-off-by: David Teigland <teigland@redhat.com>
| * dlm: move recovery barrier callsDavid Teigland2012-01-044-27/+28
| | | | | | | | | | | | | | | | Put all the calls to recovery barriers in the same function to clarify where they each happen. Should not change any behavior. Also modify some recovery debug lines to make them consistent. Signed-off-by: David Teigland <teigland@redhat.com>
| * dlm: convert rsb list to rb_treeBob Peterson2011-11-185-55/+113
| | | | | | | | | | | | | | | | | | | | Change the linked lists to rb_tree's in the rsb hash table to speed up searches. Slow rsb searches were having a large impact on gfs2 performance due to the large number of dlm locks gfs2 uses. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
* | net: remove ipv6_addr_copy()Alexey Dobriyan2011-11-221-1/+1
|/ | | | | | | C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-3.1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds2011-07-251-5/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-3.1' of git://linux-nfs.org/~bfields/linux: nfsd: don't break lease on CLAIM_DELEGATE_CUR locks: rename lock-manager ops nfsd4: update nfsv4.1 implementation notes nfsd: turn on reply cache for NFSv4 nfsd4: call nfsd4_release_compoundargs from pc_release nfsd41: Deny new lock before RECLAIM_COMPLETE done fs: locks: remove init_once nfsd41: check the size of request nfsd41: error out when client sets maxreq_sz or maxresp_sz too small nfsd4: fix file leak on open_downgrade nfsd4: remember to put RW access on stateid destruction NFSD: Added TEST_STATEID operation NFSD: added FREE_STATEID operation svcrpc: fix list-corrupting race on nfsd shutdown rpc: allow autoloading of gss mechanisms svcauth_unix.c: quiet sparse noise svcsock.c: include sunrpc.h to quiet sparse noise nfsd: Remove deprecated nfsctl system call and related code. NFSD: allow OP_DESTROY_CLIENTID to be only op in COMPOUND Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
| * locks: rename lock-manager opsJ. Bruce Fields2011-07-201-5/+5
| | | | | | | | | | | | | | | | | | | | | | Both the filesystem and the lock manager can associate operations with a lock. Confusingly, one of them (fl_release_private) actually has the same name in both operation structures. It would save some confusion to give the lock-manager ops different names. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
* | dlm: don't limit active work itemsDavid Teigland2011-07-191-1/+4
| | | | | | | | | | | | | | | | Allow multiple workqueue items (locks with callbacks) to be processed concurrently. There should be no reason not to take advantage of this workqueue feature. Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: use workqueue for callbacksDavid Teigland2011-07-157-205/+172
| | | | | | | | | | | | | | | | | | Instead of creating our own kthread (dlm_astd) to deliver callbacks for all lockspaces, use a per-lockspace workqueue to deliver the callbacks. This eliminates complications and slowdowns from many lockspaces sharing the same thread. Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: remove deadlock debug printDavid Teigland2011-07-141-3/+0
| | | | | | | | | | | | | | gfs2 recently began using this feature heavily, creating more debug output than we want to see. Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: improve rsb searchesDavid Teigland2011-07-127-48/+121
| | | | | | | | | | | | | | | | | | | | | | | | | | | | By pre-allocating rsb structs before searching the hash table, they can be inserted immediately. This avoids always having to repeat the search when adding the struct to hash list. This also adds space to the rsb struct for a max resource name, so an rsb allocation can be used by any request. The constant size also allows us to finally use a slab for the rsb structs. Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: keep lkbs in idrDavid Teigland2011-07-115-125/+82
| | | | | | | | | | | | | | | | This is simpler and quicker than the hash table, and avoids needing to search the hash list for every new lkid to check if it's used. Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: fix kmalloc argsDavid Teigland2011-07-111-1/+1
| | | | | | | | | | | | The gfp and size args were switched. Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: don't do pointless NULL check, use kzalloc and fix order of argumentsJesper Juhl2011-07-111-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In fs/dlm/lock.c in the dlm_scan_waiters() function there are 3 small issues: 1) There's no need to test the return value of the allocation and do a memset if is succeedes. Just use kzalloc() to obtain zeroed memory. 2) Since kfree() handles NULL pointers gracefully, the test of 'warned' against NULL before the kfree() after the loop is completely pointless. Remove it. 3) The arguments to kmalloc() (now kzalloc()) were swapped. Thanks to Dr. David Alan Gilbert for pointing this out. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: dump address of unknown nodeMasatake YAMATO2011-07-061-4/+5
| | | | | | | | | | | | | | | | When the dlm fails to make a network connection to another node, include the address of the node in the error message. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: use vmalloc for hash tablesBryn M. Reeves2011-07-011-9/+9
| | | | | | | | | | | | | | | | Allocate dlm hash tables in the vmalloc area to allow a greater maximum size without restructuring of the hash table code. Signed-off-by: Bryn M. Reeves <bmr@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm: show addresses in configfsMasatake YAMATO2011-06-301-2/+57
|/ | | | | | | | | Display all addresses the dlm is using for the local node from the configfs file config/dlm/<cluster>/comms/<comm>/addr_list Also make the addr file write only. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
OpenPOWER on IntegriCloud