summaryrefslogtreecommitdiffstats
path: root/fs/dlm/lock.c
Commit message (Collapse)AuthorAgeFilesLines
* [DLM] block dlm_recv in recovery transitionDavid Teigland2007-10-101-55/+81
| | | | | | | | | | | | | | | | | | | | | | | | Introduce a per-lockspace rwsem that's held in read mode by dlm_recv threads while working in the dlm. This allows dlm_recv activity to be suspended when the lockspace transitions to, from and between recovery cycles. The specific bug prompting this change is one where an in-progress recovery cycle is aborted by a new recovery cycle. While dlm_recv was processing a recovery message, the recovery cycle was aborted and dlm_recoverd began cleaning up. dlm_recv decremented recover_locks_count on an rsb after dlm_recoverd had reset it to zero. This is fixed by suspending dlm_recv (taking write lock on the rwsem) before aborting the current recovery. The transitions to/from normal and recovery modes are simplified by using this new ability to block dlm_recv. The switch from normal to recovery mode means dlm_recv goes from processing locking messages, to saving them for later, and vice versa. Races are avoided by blocking dlm_recv when setting the flag that switches between modes. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] don't overwrite castparam if it's NULLPatrick Caulfield2007-10-101-2/+4
| | | | | | | | | | | If the castaddr passed to the userland API is NULL then don't overwrite the existing castparam. This allows a different thread to cancel a lock request and the CANCEL AST gets delivered to the original thread. bz#306391 (for RHEL4) refers. Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix basts for granted PR waiting CWDavid Teigland2007-08-141-14/+55
| | | | | | | | | | | | | | Fix a long standing bug where a blocking callback would be missed when there's a granted lock in PR mode and waiting locks in both PR and CW modes (and the PR lock was added to the waiting queue before the CW lock). The logic simply compared the numerical values of the modes to determine if a blocking callback was required, but in the one case of PR and CW, the lower valued CW mode blocks the higher valued PR mode. We just need to add a special check for this PR/CW case in the tests that decide when a blocking callback is needed. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] variable allocationPatrick Caulfield2007-07-091-1/+1
| | | | | | | | | | Add a new flag, DLM_LSFL_FS, to be used when a file system creates a lockspace. This flag causes the dlm to use GFP_NOFS for allocations instead of GFP_KERNEL. (This updated version of the patch uses gfp_t for ls_allocation.) Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com> Signed-Off-By: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] canceling deadlocked lockDavid Teigland2007-07-091-0/+53
| | | | | | | | | Add a function that can be used through libdlm by a system daemon to cancel another process's deadlocked lock. A completion ast with EDEADLK is returned to the process waiting for the lock. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] timeout fixesDavid Teigland2007-07-091-6/+7
| | | | | | | | | | | | | | | | | | Various fixes related to the new timeout feature: - add_timeout() missed setting TIMEWARN flag on lkb's when the TIMEOUT flag was already set - clear_proc_locks should remove a dead process's locks from the timeout list - the end-of-life calculation for user locks needs to consider that ETIMEDOUT is equivalent to -DLM_ECANCEL - make initial default timewarn_cs config value visible in configfs - change bit position of TIMEOUT_CANCEL flag so it's not copied to a remote master node - set timestamp on remote lkb's so a lock dump will display the time they've been waiting Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] Compile fixSteven Whitehouse2007-07-091-1/+1
| | | | | | | | A one liner fix which got missed from the earlier patches. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Fabio Massimo Di Nitto <fabbione@ubuntu.com> Cc: David Teigland <teigland@redhat.com>
* [DLM] fix compile breakageDavid Teigland2007-07-091-2/+2
| | | | | | | | | In the rush to get the previous patch set sent, a compilation bug I fixed shortly before sending somehow got clobbered, probably by a missed quilt refresh or something. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] cancel in conversion deadlock [4/6]David Teigland2007-07-091-61/+132
| | | | | | | | | | | | | | | When conversion deadlock is detected, cancel the conversion and return EDEADLK to the application. This is a new default behavior where before the dlm would allow the deadlock to exist indefinately. The DLM_LKF_NODLCKWT flag can now be used in a conversion to prevent the dlm from performing conversion deadlock detection/cancelation on it. The DLM_LKF_CONVDEADLK flag can continue to be used as before to tell the dlm to demote the granted mode of the lock being converted if it gets into a conversion deadlock. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] dlm_device interface changes [3/6]David Teigland2007-07-091-11/+13
| | | | | | | | | | | | | | | | | | | | Change the user/kernel device interface used by libdlm: - Add ability for userspace to check the version of the interface. libdlm can now adapt to different versions of the kernel interface. - Increase the size of the flags passed in a lock request so all possible flags can be used from userspace. - Add an opaque "xid" value for each lock. This "transaction id" will be used later to associate locks with each other during deadlock detection. - Add a "timeout" value for each lock. This is used along with the DLM_LKF_TIMEOUT flag. Also, remove a fragment of unused code in device_read(). This patch requires updating libdlm which is backward compatible with older kernels. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] add lock timeouts and warnings [2/6]David Teigland2007-07-091-2/+144
| | | | | | | | | | | | | | | | | New features: lock timeouts and time warnings. If the DLM_LKF_TIMEOUT flag is set, then the request/conversion will be canceled after waiting the specified number of centiseconds (specified per lock). This feature is only available for locks requested through libdlm (can be enabled for kernel dlm users if there's a use for it.) If the new DLM_LSFL_TIMEWARN flag is set when creating the lockspace, then a warning message will be sent to userspace (using genetlink) after a request/conversion has been waiting for a given number of centiseconds (configurable per node). The time warnings will be used in the future to do deadlock detection in userspace. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] block scand during recovery [1/6]David Teigland2007-07-091-24/+23
| | | | | | | | Don't let dlm_scand run during recovery since it may try to do a resource directory removal while the directory nodes are changing. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix mode mungingDavid Teigland2007-05-011-2/+80
| | | | | | | | | | | | | | | | | | | | | | | | | There are flags to enable two specialized features in the dlm: 1. CONVDEADLK causes the dlm to resolve conversion deadlocks internally by changing the granted mode of locks to NL. 2. ALTPR/ALTCW cause the dlm to change the requested mode of locks to PR or CW to grant them if the normal requested mode can't be granted. GFS direct i/o exercises both of these features, especially when mixed with buffered i/o. The dlm has problems with them. The first problem is on the master node. If it demotes a lock as a part of converting it, the actual step of converting the lock isn't being done after the demotion, the lock is just left sitting on the granted queue with a granted mode of NL. I think the mistaken assumption was that the call to grant_pending_locks() would grant it, but that function naturally doesn't look at locks on the granted queue. The second problem is on the process node. If the master either demotes or gives an altmode, the munging of the gr/rq modes is never done in the process copy of the lock, leaving the master/process copies out of sync. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] change lkid formatDavid Teigland2007-05-011-4/+4
| | | | | | | | | | | | | | | A lock id is a uint32 and is used as an opaque reference to the lock. For userland apps, the lkid is passed up, through libdlm, as the return value from a write() on the dlm device. This created a problem when the high bit was 1, making the lkid look like an error. This is fixed by changing how the lkid is composed. The low 16 bits identified the hash bucket for the lock and the high 16 bits were a per-bucket counter (which eventually hit 0x8000 causing the problem). These are simply swapped around; the number of hash table buckets is far below 0x8000, making all lkid's positive when viewed as signed. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] add orphan purging code (1/2)David Teigland2007-05-011-0/+101
| | | | | | | | | | | Add code for purging orphan locks. A process can also purge all of its own non-orphan locks by passing a pid of zero. Code already exists for processes to create persistent locks that become orphans when the process exits, but the complimentary capability for another process to then purge these orphans has been missing. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] split create_message functionDavid Teigland2007-05-011-22/+32
| | | | | | | | | This splits the current create_message() function into two parts so that later patches can call the new lower-level _create_message() function when they don't have an rsb struct. No functional change in this patch. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] overlapping cancel and unlockDavid Teigland2007-05-011-188/+522
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Full cancel and force-unlock support. In the past, cancel and force-unlock wouldn't work if there was another operation in progress on the lock. Now, both cancel and unlock-force can overlap an operation on a lock, meaning there may be 2 or 3 operations in progress on a lock in parallel. This support is important not only because cancel and force-unlock are explicit operations that an app can use, but both are used implicitly when a process exits while holding locks. Summary of changes: - add-to and remove-from waiters functions were rewritten to handle situations with more than one remote operation outstanding on a lock - validate_unlock_args detects when an overlapping cancel/unlock-force can be sent and when it needs to be delayed until a request/lookup reply is received - processing request/lookup replies detects when cancel/unlock-force occured during the op, and carries out the delayed cancel/unlock-force - manipulation of the "waiters" (remote operation) state of a lock moved under the standard rsb mutex that protects all the other lock state - the two recovery routines related to locks on the waiters list changed according to the way lkb's are now locked before accessing waiters state - waiters recovery detects when lkb's being recovered have overlapping cancel/unlock-force, and may not recover such locks - revert_lock (cancel) returns a value to distinguish cases where it did nothing vs cases where it actually did a cancel; the cancel completion ast should only be done when cancel did something - orphaned locks put on new list so they can be found later for purging - cancel must be called on a lock when making it an orphan - flag user locks (ENDOFLIFE) at the end of their useful life (to the application) so we can return an error for any further cancel/unlock-force - we weren't setting COMP/BAST ast flags if one was already set, so we'd lose either a completion or blocking ast - clear an unread bast on a lock that's become unlocked Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] zero new user lvbsDavid Teigland2007-02-051-2/+2
| | | | | | | A new lvb for a userland lock wasn't being initialized to zero. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] can miss clearing resend flagDavid Teigland2007-02-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A long, complicated sequence of events, beginning with the RESEND flag not being cleared on an lkb, can result in an unlock never completing. - lkb on waiters list for remote lookup - the remote node is both the dir node and the master node, so it optimizes the lookup into a request and sends a request reply back - the request reply is saved on the requestqueue to be processed after recovery - recovery runs dlm_recover_waiters_pre() which sets RESEND flag so the lookup will be resent after recovery - end of recovery: process_requestqueue takes saved request reply which removes the lkb off the waitesr list, _without_ clearing the RESEND flag - end of recovery: dlm_recover_waiters_post() doesn't do anything with the now completed lookup lkb (would usually clear RESEND) - later, the node unmounts, unlocks this lkb that still has RESEND flag set - the lkb is on the waiters list again, now for unlock, when recovery occurs, dlm_recover_waiters_pre() shows the lkb for unlock with RESEND set, doesn't do anything since the master still exists - end of recovery: dlm_recover_waiters_post() takes this lkb off the waiters list because it has the RESEND flag set, then reports an error because unlocks are never supposed to be handled in recover_waiters_post(). - later, the unlock reply is received, doesn't find the lkb on the waiters list because recover_waiters_post() has wrongly removed it. - the unlock operation has been lost, and we're left with a stray granted lock - unmount spins waiting for the unlock to complete The visible evidence of this problem will be a node where gfs umount is spinning, the dlm waiters list will be empty, and the dlm locks list will show a granted lock. The fix is simply to clear the RESEND flag when taking an lkb off the waiters list. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] saved dlm message can be droppedDavid Teigland2007-02-051-2/+2
| | | | | | | | | | | | | | dlm_receive_message() returns 0 instead of returning 'error'. What would happen is that process_requestqueue would take a saved message off the requestqueue and call receive_message on it. receive_message would then see that recovery had been aborted, set error to EINTR, and 'goto out', expecting that the error would be returned. Instead, 0 was always returned, so process_requestqueue would think that the message had been processed and delete it instead of saving it to process next time. This means the message (usually an unlock in my tests) would be lost. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix user unlockingDavid Teigland2007-02-051-12/+18
| | | | | | | | | | | | | | When a user process exits, we clear all the locks it holds. There is a problem, though, with locks that the process had begun unlocking before it exited. We couldn't find the lkb's that were in the process of being unlocked remotely, to flag that they are DEAD. To solve this, we move lkb's being unlocked onto a new list in the per-process structure that tracks what locks the process is holding. We can then go through this list to flag the necessary lkb's when clearing locks for a process when it exits. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] rename dlm_config_info fieldsDavid Teigland2007-02-051-1/+1
| | | | | | | | | Add a "ci_" prefix to the fields in the dlm_config_info struct so that we can use macros to add configfs functions to access them (in a later patch). No functional changes in this patch, just naming changes. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix lost flags in stub repliesDavid Teigland2007-02-051-0/+3
| | | | | | | | | | | | | When the dlm fakes an unlock/cancel reply from a failed node using a stub message struct, it wasn't setting the flags in the stub message. So, in the process of receiving the fake message the lkb flags would be updated and cleared from the zero flags in the message. The problem observed in tests was the loss of the USER flag which caused the dlm to think a user lock was a kernel lock and subsequently fail an assertion checking the validity of the ast/callback field. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix receive_request() lvb copyingDavid Teigland2007-02-051-2/+6
| | | | | | | | | | | LVB's are not sent as part of new requests, but the code receiving the request was copying data into the lvb anyway. The space in the message where it mistakenly thought the lvb lived actually contained the resource name, so it wound up incorrectly copying this name data into the lvb. Fix is to just create the lvb, not copy junk into it. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix send_args() lvb copyingDavid Teigland2007-02-051-4/+16
| | | | | | | | | | | | The send_args() function is used to copy parameters into a message for a number different message types. Only some of those types are set up beforehand (in create_message) to include space for sending lvb data. send_args was wrongly copying the lvb for all message types as long as the lock had an lvb. This means that the lvb data was being written past the end of the message into unknown space. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix resend rcom lockDavid Teigland2007-02-051-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | There's a chance the new master of resource hasn't learned it's the new master before another node sends it a lock during recovery. The node sending the lock needs to resend if this happens. - A sends a master lookup for resource R to C - B sends a master lookup for resource R to C - C receives A's lookup, assigns A to be master of R and sends a reply back to A - C receives B's lookup and sends a reply back to B saying that A is the master - B receives lookup reply from C and sends its lock for R to A - A receives lock from B, doesn't think it's the master of R and sends an error back to B - A receives lookup reply from C and becomes master of R - B gets error back from A and resends its lock back to A (this resending is what this patch does) - A receives lock from B, it now sees it's the master of R and takes the lock Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] clear sbflags on lock masterDavid Teigland2006-11-301-0/+1
| | | | | | | | | | | | | | | RH BZ 211622 The ALTMODE flag can be set in the lock master's copy of the lock but never cleared, so ALTMODE will also be returned in a subsequent conversion of the lock when it shouldn't be. This results in lock_dlm incorrectly switching to the alternate lock mode when returning the result to gfs which then asserts when it sees the wrong lock state. The fix is to propagate the cleared sbflags value to the master node when the lock is requested. QA's d_rwrandirectlarge test triggers this bug very quickly. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix requestqueue raceDavid Teigland2006-11-301-4/+11
| | | | | | | | | | | | | | | Red Hat BZ 211914 There's a race between dlm_recoverd (1) enabling locking and (2) clearing out the requestqueue, and dlm_recvd (1) checking if locking is enabled and (2) adding a message to the requestqueue. An order of recoverd(1), recvd(1), recvd(2), recoverd(2) will result in a message being left on the requestqueue. The fix is to have dlm_recvd check if dlm_recoverd has enabled locking after taking the mutex for the requestqueue and if it has processing the message instead of queueing it. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2/DLM] Fix trailing whitespaceSteven Whitehouse2006-09-251-1/+1
| | | | | | | As per Andrew Morton's request, removed trailing whitespace. Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] confirm master for recovered waiting requestsDavid Teigland2006-09-081-0/+2
| | | | | | | | | | | | | | | | Fixing the following scenario: - A request is on the waiters list waiting for a reply from a remote node. - The request is the first one on the resource, so first_lkid is set. - The remote node fails causing recovery. - During recovery the requesting node becomes master. - The request is now processed locally instead of being a remote operation. - At this point we need to call confirm_master() on the resource since we're certain we're now the master node. This will clear first_lkid. - We weren't calling confirm_master(), so first_lkid was not being cleared causing subsequent requests on that resource to get stuck. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] down conversion clearing flagsDavid Teigland2006-08-231-5/+4
| | | | | | | | | | | The down-conversion optimization was resulting in the lkb flags being cleared because the stub message reply had no flags value set. Copy the current flags into the stub message so they'll be copied back into the lkb as part of processing the fake reply. Also add an assertion to catch this error more directly if it exists elsewhere. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] down conversion clearing flagsPatrick Caulfield2006-08-231-0/+1
| | | | | | | | | Oh, and here's (hopefully) the last of these ua_tmp patches. I think I've caught all the paths now. Sorry it didn't make the last one. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] preserve lksb address in user conversionsPatrick Caulfield2006-08-231-0/+1
| | | | | | | | | This patch fixes bz#203444 where the LKSB was lost during userland conversion operations Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] dump rsb and locks on assertDavid Teigland2006-08-211-9/+31
| | | | | | | | | Introduce new function dlm_dump_rsb() to call within assertions instead of dlm_print_rsb(). The new function dumps info about all locks on the rsb in addition to rsb details. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix userland unlockPatrick Caulfield2006-08-081-0/+1
| | | | | | | | | | | | This patch fixes the userland DLM unlock code so that it correctly returns the address of the userland lock status block in its completion AST. It fixes bug #201348 Patrick Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] schedule during long loop through locksDavid Teigland2006-07-261-0/+1
| | | | | | | | The loop through all waiting locks in recover_waiters can potentially be long, so we should schedule explicitly. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix loop in grant_after_purgeDavid Teigland2006-07-261-4/+9
| | | | | | | | | | The loop in grant_after_purge is intended to find all rsb's in each hash bucket that have the LOCKS_PURGED flag set. The loop was quitting the current bucket after finding just one rsb instead of going until there are no more. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix leaking user locksDavid Teigland2006-07-201-3/+4
| | | | | | | | User NOQUEUE lock requests to a remote node that failed with -EAGAIN were never being removed from a process's list of locks. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] [RFC: -mm patch] fs/dlm/lock.c: unexport dlm_lvb_operationsAdrian Bunk2006-07-201-1/+0
| | | | | | | | | | | | | | | | On Thu, Jul 13, 2006 at 10:48:00PM -0700, Andrew Morton wrote: >... > Changes since 2.6.18-rc1-mm1: >... > git-gfs2.patch >... > git trees. >... This patch removes the unused EXPORT_SYMBOL_GPL(dlm_lvb_operations). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] dlm: user locksDavid Teigland2006-07-131-6/+298
| | | | | | | | | | | | This changes the way the dlm handles user locks. The core dlm is now aware of user locks so they can be dealt with more efficiently. There is no more dlm_device module which previously managed its own duplicate copy of every user lock. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix grant_after_purge softlockupDavid Teigland2006-05-021-14/+28
| | | | | | | | | | | In dlm_grant_after_purge() we were holding a hash table read_lock while calling put_rsb() which potentially removes the rsb from the hash table, taking the same lock in write. Fix this by flagging rsb's ahead of time that have been purged. Then iteratively read_lock the hash table, find a flagged rsb, unlock, process rsb. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] Pass in lockspace to lkb put functionDavid Teigland2006-02-281-23/+31
| | | | | | | | In some cases a lockspace isn't attached to the lkb, so that it needs to be passed directly to the lkb put function. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] Remove range locks from the DLMDavid Teigland2006-02-231-94/+9
| | | | | | | This patch removes support for range locking from the DLM Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] Update DLM to the latest patch levelDavid Teigland2006-01-201-36/+36
| | | | | Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
* [DLM] The core of the DLM for GFS2/CLVMDavid Teigland2006-01-181-0/+3610
This is the core of the distributed lock manager which is required to use GFS2 as a cluster filesystem. It is also used by CLVM and can be used as a standalone lock manager independantly of either of these two projects. It implements VAX-style locking modes. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
OpenPOWER on IntegriCloud