summaryrefslogtreecommitdiffstats
path: root/fs/btrfs
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'btrfs-3.0' of git://github.com/chrismason/linuxLinus Torvalds2011-10-031-8/+16
|\ | | | | | | | | * 'btrfs-3.0' of git://github.com/chrismason/linux: Btrfs: force a page fault if we have a shorty copy on a page boundary
| * Btrfs: force a page fault if we have a shorty copy on a page boundaryJosef Bacik2011-09-301-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A user reported a problem where ceph was getting into 100% cpu usage while doing some writing. It turns out it's because we were doing a short write on a not uptodate page, which means we'd fall back at one page at a time and fault the page in. The problem is our position is on the page boundary, so our fault in logic wasn't actually reading the page, so we'd just spin forever or until the page got read in by somebody else. This will force a readpage if we end up doing a short copy. Alexandre could reproduce this easily with ceph and reports it fixes his problem. I also wrote a reproducer that no longer hangs my box with this patch. Thanks, Reported-and-tested-by: Alexandre Oliva <aoliva@redhat.com> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
* | Merge branch 'btrfs-3.0' into for-linusChris Mason2011-09-201-1/+6
|\ \ | |/
| * Btrfs: reserve sufficient space for ioctl cloneSage Weil2011-09-201-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | Fix a crash/BUG_ON in the clone ioctl due to insufficient reservation. We need to reserve space for: - adjusting the old extent (possibly splitting it) - adding the new extent - updating the inode Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
* | Btrfs: only clear the need lookup flag after the dentry is setupJosef Bacik2011-09-181-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | We can race with readdir and the RCU path walking stuff. This is because we clear the need lookup flag before actually instantiating the inode. This will lead the RCU path walk stuff to find a dentry it thinks is valid without a d_inode attached. So instead unhash the dentry when we first start the lookup, and then clear the flag after we've instantiated the dentry so we're garunteed to either try the slow lookup, or have the d_inode set properly. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
* | BTRFS: Fix lseek return value for errorJeff Liu2011-09-181-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | The recent reworking of btrfs' lseek lead to incorrect values being returned. This adds checks for seeking beyond EOF in SEEK_HOLE and makes sure the error values come back correct. Andi Kleen also sent in similar patches. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
* | Merge branch 'btrfs-3.0' into for-linusChris Mason2011-09-182-7/+12
|\ \ | |/
| * Btrfs: don't change inode flag of the dest clone fileLi Zefan2011-09-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | The dst file will have the same inode flags with dst file after file clone, and I think it's unexpected. For example, the dst file will suddenly become immutable after getting some share of data with src file, if the src is immutable. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: don't make a file partly checksummed through file cloneLi Zefan2011-09-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To reproduce the bug: # mount /dev/sda7 /mnt # dd if=/dev/zero of=/mnt/src bs=4K count=1 # umount /mnt # mount -o nodatasum /dev/sda7 /mnt # dd if=/dev/zero of=/mnt/dst bs=4K count=1 # clone_range -s 4K -l 4K /mnt/src /mnt/dst # echo 3 > /proc/sys/vm/drop_caches # cat /mnt/dst # dmesg ... btrfs no csum found for inode 258 start 0 btrfs csum failed ino 258 off 0 csum 2566472073 private 0 It's because part of the file is checksummed and the other part is not, and then btrfs will complain checksum is not found when we read the file. Disallow file clone if src and dst file have different checksum flag, so we ensure a file is completely checksummed or unchecksummed. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: fix pages truncation in btrfs_ioctl_clone()Li Zefan2011-09-181-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | It's a bug in commit f81c9cdc567cd3160ff9e64868d9a1a7ee226480 (Btrfs: truncate pages from clone ioctl target range) We should pass the dest range to the truncate function, but not the src range. Also move the function before locking extent state. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * btrfs: fix d_off in the first direntHidetoshi Seto2011-09-181-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the d_off in the first dirent for "." (that originates from the 4th argument "offset" of filldir() for the 2nd dirent for "..") is wrongly assigned in btrfs_real_readdir(), telldir returns same offset for different locations. | # mkfs.btrfs /dev/sdb1 | # mount /dev/sdb1 fs0 | # cd fs0 | # touch file0 file1 | # ../test | telldir: 0 | readdir: d_off = 2, d_name = "." | telldir: 2 | readdir: d_off = 2, d_name = ".." | telldir: 2 | readdir: d_off = 3, d_name = "file0" | telldir: 3 | readdir: d_off = 2147483647, d_name = "file1" | telldir: 2147483647 To fix this problem, pass filp->f_pos (which is loff_t) instead. | # ../test | telldir: 0 | readdir: d_off = 1, d_name = "." | telldir: 1 | readdir: d_off = 2, d_name = ".." | telldir: 2 | readdir: d_off = 3, d_name = "file0" : At the moment the "offset" for "." is unused because there is no preceding dirent, however it is better to pass filp->f_pos to follow grammatical usage. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
* | Merge branch 'for-linus' of git://github.com/chrismason/linuxLinus Torvalds2011-09-128-22/+62
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://github.com/chrismason/linux: Btrfs: add dummy extent if dst offset excceeds file end in Btrfs: calc file extent num_bytes correctly in file clone btrfs: xattr: fix attribute removal Btrfs: fix wrong nbytes information of the inode Btrfs: fix the file extent gap when doing direct IO Btrfs: fix unclosed transaction handle in btrfs_cont_expand Btrfs: fix misuse of trans block rsv Btrfs: reset to appropriate block rsv after orphan operations Btrfs: skip locking if searching the commit root in csum lookup btrfs: fix warning in iput for bad-inode Btrfs: fix an oops when deleting snapshots
| * Btrfs: add dummy extent if dst offset excceeds file end inLi Zefan2011-09-111-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | You can see there's no file extent with range [0, 4096]. Check this by btrfsck: # btrfsck /dev/sda7 root 5 inode 258 errors 100 ... Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: calc file extent num_bytes correctly in file cloneLi Zefan2011-09-111-3/+10
| | | | | | | | | | | | | | num_bytes should be 4096 not 12288. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * btrfs: xattr: fix attribute removalDavid Sterba2011-09-111-0/+9
| | | | | | | | | | | | | | | | An attribute is not removed by 'setfattr -x attr file' and remains visible in attr list. This makes xfstests/062 pass again. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: fix wrong nbytes information of the inodeMiao Xie2011-09-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we write some data into the data hole of the file(no preallocation for this hole), Btrfs will allocate some disk space, and update nbytes of the inode, but the other element--disk_i_size needn't be updated. At this condition, we must update inode metadata though disk_i_size is not changed(btrfs_ordered_update_i_size() return 1). # mkfs.btrfs /dev/sdb1 # mount /dev/sdb1 /mnt # touch /mnt/a # truncate -s 856002 /mnt/a # dd if=/dev/zero of=/mnt/a bs=4K count=1 conv=nocreat,notrunc # umount /mnt # btrfsck /dev/sdb1 root 5 inode 257 errors 400 found 32768 bytes used err is 1 Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: fix the file extent gap when doing direct IOMiao Xie2011-09-111-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we write some data to the place that is beyond the end of the file in direct I/O mode, a data hole will be created. And Btrfs should insert a file extent item that point to this hole into the fs tree. But unfortunately Btrfs forgets doing it. The following is a simple way to reproduce it: # mkfs.btrfs /dev/sdc2 # mount /dev/sdc2 /test4 # touch /test4/a # dd if=/dev/zero of=/test4/a seek=8 count=1 bs=4K oflag=direct conv=nocreat,notrunc # umount /test4 # btrfsck /dev/sdc2 root 5 inode 257 errors 100 Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: fix unclosed transaction handle in btrfs_cont_expandMiao Xie2011-09-111-2/+6
| | | | | | | | | | | | | | | | The function - btrfs_cont_expand() forgot to close the transaction handle before it jump out the while loop. Fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: fix misuse of trans block rsvLiu Bo2011-09-111-0/+4
| | | | | | | | | | | | | | | | | | At the beginning of create_pending_snapshot, trans->block_rsv is set to pending->block_rsv and is used for snapshot things, however, when it is done, we do not recover it as will. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: reset to appropriate block rsv after orphan operationsLiu Bo2011-09-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | While truncating free space cache, we forget to change trans->block_rsv back to the original one, but leave it with the orphan_block_rsv, and then with option inode_cache enable, it leads to countless warnings of btrfs_alloc_free_block and btrfs_orphan_commit_root: WARNING: at fs/btrfs/extent-tree.c:5711 btrfs_alloc_free_block+0x180/0x350 [btrfs]() ... WARNING: at fs/btrfs/inode.c:2193 btrfs_orphan_commit_root+0xb0/0xc0 [btrfs]() Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: skip locking if searching the commit root in csum lookupJosef Bacik2011-09-111-1/+3
| | | | | | | | | | | | | | | | | | It's not enough to just search the commit root, since we could be cow'ing the very block we need to search through, which would mean that its locked and we'll still deadlock. So use path->skip_locking as well. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * btrfs: fix warning in iput for bad-inodeSergei Trofimovich2011-09-111-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | iput() shouldn't be called for inodes in I_NEW state. We need to mark inode as constructed first. WARNING: at fs/inode.c:1309 iput+0x20b/0x210() Call Trace: [<ffffffff8103e7ba>] warn_slowpath_common+0x7a/0xb0 [<ffffffff8103e805>] warn_slowpath_null+0x15/0x20 [<ffffffff810eaf0b>] iput+0x20b/0x210 [<ffffffff811b96fb>] btrfs_iget+0x1eb/0x4a0 [<ffffffff811c3ad6>] btrfs_run_defrag_inodes+0x136/0x210 [<ffffffff811ad55f>] cleaner_kthread+0x17f/0x1a0 [<ffffffff81035b7d>] ? sub_preempt_count+0x9d/0xd0 [<ffffffff811ad3e0>] ? transaction_kthread+0x280/0x280 [<ffffffff8105af86>] kthread+0x96/0xa0 [<ffffffff814336d4>] kernel_thread_helper+0x4/0x10 [<ffffffff8105aef0>] ? kthread_worker_fn+0x190/0x190 [<ffffffff814336d0>] ? gs_change+0xb/0xb Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> CC: Konstantin Khlebnikov <khlebnikov@openvz.org> Tested-by: David Sterba <dsterba@suse.cz> CC: Josef Bacik <josef@redhat.com> CC: Chris Mason <chris.mason@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: fix an oops when deleting snapshotsLiu Bo2011-09-111-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can reproduce this oops via the following steps: $ mkfs.btrfs /dev/sdb7 $ mount /dev/sdb7 /mnt/btrfs $ for ((i=0; i<3; i++)); do btrfs sub snap /mnt/btrfs /mnt/btrfs/s_$i; done $ rm -fr /mnt/btrfs/* $ rm -fr /mnt/btrfs/* then we'll get ------------[ cut here ]------------ kernel BUG at fs/btrfs/inode.c:2264! [...] Call Trace: [<ffffffffa05578c7>] btrfs_rmdir+0xf7/0x1b0 [btrfs] [<ffffffff81150b95>] vfs_rmdir+0xa5/0xf0 [<ffffffff81153cc3>] do_rmdir+0x123/0x140 [<ffffffff81145ac7>] ? fput+0x197/0x260 [<ffffffff810aecff>] ? audit_syscall_entry+0x1bf/0x1f0 [<ffffffff81153d0d>] sys_unlinkat+0x2d/0x40 [<ffffffff8147896b>] system_call_fastpath+0x16/0x1b RIP [<ffffffffa054f7b9>] btrfs_orphan_add+0x179/0x1a0 [btrfs] When it comes to btrfs_lookup_dentry, we may set a snapshot's inode->i_ino to BTRFS_EMPTY_SUBVOL_DIR_OBJECTID instead of BTRFS_FIRST_FREE_OBJECTID, while the snapshot's location.objectid remains unchanged. However, btrfs_ino() does not take this into account, and returns a wrong ino, and causes the oops. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
* | Btrfs: fix 64 bit divide problemJosef Bacik2011-08-211-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a regression introduced by commit cdcb725c05fe ("Btrfs: check if there is enough space for balancing smarter"). We can't do 64-bit divides on 32-bit architectures. In cases where we need to divide/multiply by 2 we should just left/right shift respectively, and in cases where theres N number of devices use do_div. Also make the counters u64 to match up with rw_devices. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Acked-and-tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'btrfs-3.0' into for-linusChris Mason2011-08-188-35/+167
|\ \ | |/
| * Btrfs: set i_size properly when fallocating and we alreadyJosef Bacik2011-08-181-0/+14
| | | | | | | | | | | | | | | | | | | | xfstests exposed a problem with preallocate when it fallocates a range that already has an extent. We don't set the new i_size properly because we see that we already have an extent. This isn't right and we should update i_size if the space already exists. With this patch we now pass xfstests 075. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: truncate pages from clone ioctl target rangeSage Weil2011-08-161-0/+4
| | | | | | | | | | | | | | | | | | | | We need to truncate page cache pages for the clone ioctl target range or else we'll confuse ourselves to no end. If the old data was cached, we used to still see it (until remount). If the page was partially updated we used to get a mix of old and new data. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: fix uninitialized sync_pendingMiao Xie2011-08-161-1/+1
| | | | | | | | | | | | | | sync_pending is uninitialized before it be used, fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: fix wrong free space informationMiao Xie2011-08-161-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | Btrfs subtracted the size of the allocated space twice when it allocated the space from the bitmap in the cluster, it broke the free space information and led to oops finally. And this patch also fixes the bug that ctl->free_space was subtracted without lock. Reported-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * btrfs: memory leak in btrfs_add_inode_defrag()Dan Carpenter2011-08-161-0/+2
| | | | | | | | | | | | | | We don't use the defrag struct on this path. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: use plain page_address() in header fields setget functionsLi Zefan2011-08-161-4/+2
| | | | | | | | | | | | | | We've stopped using highmem for extent buffers. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: forced readonly when btrfs_drop_snapshot() failsTsutomu Itoh2011-08-162-10/+16
| | | | | | | | | | | | | | | | | | | | The filesystem turns readonly instead of returning the error to the caller when detected error in btrfs_drop_snapshot(). and, because the caller doesn't check the error, the function type is changed to 'void'. Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: check if there is enough space for balancing smarterliubo2011-08-161-6/+35
| | | | | | | | | | | | | | | | | | | | When checking if there is enough space for balancing a block group, since we do not take raid types into consideration, we do not account corrent amounts of space that we needed. This makes us do some extra work before we get ENOSPC. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: fix a bug of balance on full multi-disk partitionsliubo2011-08-161-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When balancing, we'll first try to shrink devices for some space, but if it is working on a full multi-disk partition with raid protection, we may encounter a bug, that is, while shrinking, total_bytes may be less than bytes_used, and btrfs may allocate a dev extent that accesses out of device's bounds. Then we will not be able to write or read the data which stores at the end of the device, and get the followings: device fsid 0939f071-7ea3-46c8-95df-f176d773bfb6 devid 1 transid 10 /dev/sdb5 Btrfs detected SSD devices, enabling SSD mode btrfs: relocating block group 476315648 flags 9 btrfs: found 4 extents attempt to access beyond end of device sdb5: rw=145, want=546176, limit=546147 attempt to access beyond end of device sdb5: rw=145, want=546304, limit=546147 attempt to access beyond end of device sdb5: rw=145, want=546432, limit=546147 attempt to access beyond end of device sdb5: rw=145, want=546560, limit=546147 attempt to access beyond end of device Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: fix an oops of log replayliubo2011-08-161-4/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When btrfs recovers from a crash, it may hit the oops below: ------------[ cut here ]------------ kernel BUG at fs/btrfs/inode.c:4580! [...] RIP: 0010:[<ffffffffa03df251>] [<ffffffffa03df251>] btrfs_add_link+0x161/0x1c0 [btrfs] [...] Call Trace: [<ffffffffa03e7b31>] ? btrfs_inode_ref_index+0x31/0x80 [btrfs] [<ffffffffa04054e9>] add_inode_ref+0x319/0x3f0 [btrfs] [<ffffffffa0407087>] replay_one_buffer+0x2c7/0x390 [btrfs] [<ffffffffa040444a>] walk_down_log_tree+0x32a/0x480 [btrfs] [<ffffffffa0404695>] walk_log_tree+0xf5/0x240 [btrfs] [<ffffffffa0406cc0>] btrfs_recover_log_trees+0x250/0x350 [btrfs] [<ffffffffa0406dc0>] ? btrfs_recover_log_trees+0x350/0x350 [btrfs] [<ffffffffa03d18b2>] open_ctree+0x1442/0x17d0 [btrfs] [...] This comes from that while replaying an inode ref item, we forget to check those old conflicting DIR_ITEM and DIR_INDEX items in fs/file tree, then we will come to conflict corners which lead to BUG_ON(). Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Tested-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: detect wether a device supports discardJosef Bacik2011-08-163-2/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We have a problem where if a user specifies discard but doesn't actually support it we will return EOPNOTSUPP from btrfs_discard_extent. This is a problem because this gets called (in a fashion) from the tree log recovery code, which has a nice little BUG_ON(ret) after it, which causes us to fail the tree log replay. So instead detect wether our devices support discard when we're adding them and then don't issue discards if we know that the device doesn't support it. And just for good measure set ret = 0 in btrfs_issue_discard just in case we still get EOPNOTSUPP so we don't screw anybody up like this again. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: force unplugs when switching from high to regular priority biosChris Mason2011-08-051-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | Btrfs does bio submissions from a worker thread, and each device has a list of high priority bios and regular priority bios. Synchronous writes go to the high priority thread while async writes go to regular list. This commit brings back an explicit unplug any time we switch from high to regular priority, which makes it easier for the block layer to give us low latencies. Signed-off-by: Chris Mason <chris.mason@oracle.com>
* | btrfs: unlock on error in btrfs_file_llseek()Dan Carpenter2011-08-181-4/+8
| | | | | | | | | | | | | | | | There were some unlocks on error missing in a recent patch to btrfs_file_llseek(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
* | btrfs: btrfs_permission's RO check shouldn't apply to device nodesJeff Mahoney2011-08-181-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch tightens the read-only access checks in btrfs_permission to match the constraints in inode_permission. Currently, even though the device node itself will be unmodified, read-write access to device nodes is denied to when the device node resides on a read-only subvolume or a is a file that has been marked read-only by the btrfs conversion utility. With this patch applied, the check only affects regular files, directories, and symlinks. It also restructures the code a bit so that we don't duplicate the MAY_WRITE check for both tests. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2011-08-0219-528/+269
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (31 commits) Btrfs: don't call writepages from within write_full_page Btrfs: Remove unused variable 'last_index' in file.c Btrfs: clean up for find_first_extent_bit() Btrfs: clean up for wait_extent_bit() Btrfs: clean up for insert_state() Btrfs: remove unused members from struct extent_state Btrfs: clean up code for merging extent maps Btrfs: clean up code for extent_map lookup Btrfs: clean up search_extent_mapping() Btrfs: remove redundant code for dir item lookup Btrfs: make acl functions really no-op if acl is not enabled Btrfs: remove remaining ref-cache code Btrfs: remove a BUG_ON() in btrfs_commit_transaction() Btrfs: use wait_event() Btrfs: check the nodatasum flag when writing compressed files Btrfs: copy string correctly in INO_LOOKUP ioctl Btrfs: don't print the leaf if we had an error btrfs: make btrfs_set_root_node void Btrfs: fix oops while writing data to SSD partitions Btrfs: Protect the readonly flag of block group ... Fix up trivial conflicts (due to acl and writeback cleanups) in - fs/btrfs/acl.c - fs/btrfs/ctree.h - fs/btrfs/extent_io.c
| * Btrfs: don't call writepages from within write_full_pageJosef Bacik2011-08-011-10/+0
| | | | | | | | | | | | | | | | | | | | | | When doing a writepage we call writepages to try and write out any other dirty pages in the area. This could cause problems where we commit a transaction and then have somebody else dirtying metadata in the area as we could end up writing out a lot more than we care about, which could cause latency on anybody who is waiting for the transaction to completely finish committing. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: Remove unused variable 'last_index' in file.cMitch Harder2011-08-011-5/+2
| | | | | | | | | | | | | | | | | | | | | | The variable 'last_index' is calculated in the __btrfs_buffered_write function and passed as a parameter to the prepare_pages function, but is not used anywhere in the prepare_pages function. Remove instances of 'last_index' in these functions. Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: clean up for find_first_extent_bit()Xiao Guangrong2011-08-011-40/+24
| | | | | | | | | | | | | | | | | | find_first_extent_bit() and find_first_extent_bit_state() share most of the code, and we can just make the former call the latter. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: clean up for wait_extent_bit()Xiao Guangrong2011-08-011-5/+1
| | | | | | | | | | | | | | | | We can just use cond_resched_lock(). Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: clean up for insert_state()Xiao Guangrong2011-08-011-5/+5
| | | | | | | | | | | | | | | | Don't duplicate set_state_bits(). Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: remove unused members from struct extent_stateXiao Guangrong2011-08-011-2/+0
| | | | | | | | | | | | | | | | These members are not used at all. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: clean up code for merging extent mapsLi Zefan2011-08-011-38/+21
| | | | | | | | | | | | | | | | unpin_extent_cache() and add_extent_mapping() shares the same code that merges extent maps. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: clean up code for extent_map lookupLi Zefan2011-08-011-56/+29
| | | | | | | | | | | | | | lookup_extent_map() and search_extent_map() can share most of code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: clean up search_extent_mapping()Li Zefan2011-08-011-14/+3
| | | | | | | | | | | | | | | | rb_node returned by __tree_search() can be a valid pointer or NULL, but won't be some errno. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: remove redundant code for dir item lookupLi Zefan2011-08-011-28/+2
| | | | | | | | | | | | | | | | | | When we search a dir item with a specific hash code, we can just return NULL without further checking if btrfs_search_slot() returns 1. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
OpenPOWER on IntegriCloud