summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* dca: redesign locks to fix deadlocksMaciej Sosnowski2009-02-021-18/+33
| | | | | | | | | | | Change spin_locks to irqsave to prevent dead-locks. Protect adding and deleting to/from dca_providers list. Drop the lock during dca_sysfs_add_req() and dca_sysfs_remove_req() calls as they might sleep (use GFP_KERNEL allocation). Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cassini/sungem: limit reaches -1, but 0 testedRoel Kluin2009-02-022-3/+3
| | | | | | | | | | | | | | | | while (limit--) if (test()) break; if (limit <= 0) goto test_failed; In the last iteration, limit is decremented after the test to 0. If just thereafter test() succeeds and a break occurs, the goto still occurs because limit is 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: variables reach -1, but 0 testedRoel Kluin2009-02-027-14/+14
| | | | | | | | | while (timeout--) { ... } timeout becomes -1 if the loop isn't ended otherwise, not 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: bugfix: Add missing netif_napi_del call.Ron Mercer2009-02-021-1/+4
| | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: bugfix: Add flash offset for second port.Ron Mercer2009-02-021-1/+8
| | | | | | | Without this the 2nd port gets first ports MAC addr. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: bugfix: Fix endian issue when reading flash.Ron Mercer2009-02-022-9/+12
| | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb: fix link reporting when using sgmiiAlexander Duyck2009-01-311-2/+9
| | | | | | | | | | When using sgmii the link was not being properly passed up to the driver from the underlying link management functions. This change corrects it so that get_link_status is cleared when a link has been found. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb: prevent skb_over panic w/ mtu smaller than 1KAlexander Duyck2009-01-311-4/+4
| | | | | | | | | | | | A panic has been observed with frame sizes smaller than 1K. This has been root caused to the hardware spanning larger frames across multiple buffers and then reporting the original frame size in the first descriptor. To prevent this we can enable set the LPE bit which in turn will restrict packet sizes to those set in the RLPML register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb: Fix DCA errors and do not use context index for 82576Alexander Duyck2009-01-312-15/+10
| | | | | | | | | | | 82576 was being incorrectly flagged as needing a context index. It does not as each ring has it's own table of 2 contexts. Driver was registering after registering the driver instead of the other way around. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Replace stats_enabled flag with a disable countBen Hutchings2009-01-306-25/+57
| | | | | | | | | | | Currently we use a spin-lock to serialise statistics fetches and also to inhibit them for short periods of time, plus a flag to enable/disable statistics fetches for longer periods of time, during online reset. This was apparently insufficient to deal with the several reasons for stats being disabled. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: SFX7101/SFT9001: Fix AN advertisementsBen Hutchings2009-01-306-201/+141
| | | | | | | | | | | | | | | | | | | All 10Xpress PHYs require autonegotiation all the time; enforce this in the set_settings() method and do not treat it as a workaround. Remove claimed support for 100M HD mode since it is not supported by current firmware. Do not set speed override bits when AN is enabled, and do not use register 1.49192 for AN configuration as it can override what we set elsewhere. Always set the AN selector bits to 1 (802.3). Fix confusion between Next Page and Extended Next Page. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: SFT9001: Always enable XNP exchange on SFT9001 rev BBen Hutchings2009-01-301-1/+1
| | | | | | | This workaround is not specific to rev A. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Update board info for hardware monitor on SFN4111T-R5 and laterBen Hutchings2009-01-301-2/+10
| | | | | Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Test for PHYXS faults whenever we cannot test link state bitsSteve Hodgson2009-01-301-7/+9
| | | | | | | | | Depending on the loopback mode, there may be no pertinent link state bits. In this case we test the PHYXS RX fault bit instead. Make sure to do this in all cases where there are no link state bits. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Reinitialise the PHY completely in case of a PHY or NIC resetSteve Hodgson2009-01-304-13/+28
| | | | | | | | | | In particular, set pause advertising bits properly. A PHY reset is not necessary to recover from the register self-test, so use a "invisible" reset there instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Fix post-reset MAC selectionSteve Hodgson2009-01-301-7/+8
| | | | | | | | | Modify falcon_switch_mac() to always set NIC_STAT_REG, even if the the MAC is the same as it was before. This ensures that the value is correct after an online reset. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1Ben Hutchings2009-01-301-6/+9
| | | | | | | | | | | | | Change sfn4111t_reset() to change only GPIO output enables so that it doesn't break subsequent I2C operations. Update comments to explain exactly what we're doing. Add a short sleep to make sure the FLASH_CFG_1 value is latched before any subsequent I2C operations. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: SFT9001: Fix speed reporting in 1G PHY loopbackSteve Hodgson2009-01-303-18/+18
| | | | | | | | Instead of disabling AN in loopback, just prevent restarting AN and override the speed in sft9001_get_settings(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: SFX7101: Remove workaround for bad link trainingSteve Hodgson2009-01-304-28/+0
| | | | | | | | | | | | Early versions of the SFX7101 firmware could complete link training in a state where it would not adequately cancel noise (Solarflare bug 10750). We previously worked around this by resetting the PHY after seeing many Ethernet CRC errors. This workaround is unsafe since it takes no account of the interval between errors; it also appears to be unnecessary with production firmware. Therefore remove it. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: SFT9001: Enable robust link trainingSteve Hodgson2009-01-301-1/+5
| | | | | | | | Enable a firmware option that appears to be necessary for reliable operation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sky2: fix hard hang with netconsoling and iface going upAlexey Dobriyan2009-01-301-3/+3
| | | | | | | | | Printing anything over netconsole before hw is up and running is, of course, not going to work. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tulip: fix 21142 with 10Mbps without negotiationPhilippe De Muyter2009-01-291-4/+19
| | | | | | | | | with current kernels, tulip 21142 ethernet controllers fail to connect to a 10Mbps only (i.e. without negotiation-partner) network. It used to work in 2.4 kernels. Fix that. Tested on a 21142 Rev 0x11. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/skfp: if !capable(CAP_NET_ADMIN): inverted logicRoel Kluin2009-01-291-2/+2
| | | | | | | Fix inverted logic Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Fix Wake-on-LAN supportAnton Vorontsov2009-01-291-0/+2
| | | | | | | | | | | | | | | | | | | | commit 0f0ca340e57bd7446855fefd07a64249acf81223 ("phy: power management support") caused a regression in the gianfar driver. Now phylib turns off PHY power during suspend, and thus WOL doesn't work anymore. This patch workarounds the issue by enabling wakeup in the MDIO device, i.e. just restores the old behaviour for the gianfar driver. Note that this way all PHYs on a given MDIO bus won't be turned off during suspend, which isn't good from the power saving point of view. A proper, per netdevice wakeup management support will need a bit reworked phylib suspend/resume logic. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* smsc911x: timeout reaches -1Roel Kluin2009-01-291-1/+1
| | | | | | | | | With a postfix decrement the timeout will reach -1 rather than 0, so the warning will not be issued. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* smsc9420: fix interrupt signalling test failuresSteve Glendinning2009-01-291-2/+1
| | | | | | | | | | | | | | smsc9420 performs an interrupt signalling test when the interface is brought up. The current code mistakenly sets its test flag to false AFTER enabling the software interrupt source, making failure quite likely. This patch changes the code to set the test flag BEFORE enabling interrupts. I've also removed an smp_wmb because the following spinlock provides an implicit memory barrier. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ucc_geth: Change uec phy id to the same format as gianfar'sHaiying Wang2009-01-294-3/+32
| | | | | | | | | | | | | The commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert gianfar to an of_platform_driver") changes the gianfar's phy id to the format like "mdio@xxxx:xx", but uec still uses the old format like "xxxxxxxx:xx". For the board whose UEC uses gianfar-mdio like MPC8568MDS, the phy can not be attached because of the incompatible phy id format. This patch changes uec's phy id to the same format as gianfar's. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* wimax: fix build issue when debugfs is disabledInaky Perez-Gonzalez2009-01-292-14/+16
| | | | | | | | | | | | | | | | | | | | | As reported by Toralf Förster and Randy Dunlap. - http://linuxwimax.org/pipermail/wimax/2009-January/000460.html - http://lkml.org/lkml/2009/1/29/279 The definitions needed for the wimax stack and i2400m driver debug infrastructure was, by mistake, compiled depending on CONFIG_DEBUG_FS (by them being placed in the debugfs.c files); thus the build broke in 2.6.29-rc3 when debugging was enabled (CONFIG_WIMAX_DEBUG) and DEBUG_FS was disabled. These definitions are always needed if debug is enabled at compile time (independently of DEBUG_FS being or not enabled), so moving them to a file that is always compiled fixes the issue. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: fix memory leak in drivers/net/netxen_nic_init.cDaniel Marjamäki2009-01-291-1/+3
| | | | | | | | | | For kernel bugzilla #12537: http://bugzilla.kernel.org/show_bug.cgi?id=12537 Free memory. Signed-off-by: Daniel Marjamäki <danielm77@spray.se> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: revert jumbo ringsizeDhananjay Phadke2009-01-291-1/+1
| | | | | | | | | | | | | | | Reducing jumbo ring size below 1024 reduces throughput for old firmwares (3.4.216 and older) running on older (NX2031) chip, so restore it back to 1024. This was reduced in commit 32ec803348b4d5f1353e1d7feae30880b8b3e342 ("netxen: reduce memory footprint"). Raising jumbo ring size from 512 to 1024, adds ~4MB per port, but there's still big saving because of original patch (~20MB per port). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-01-293-3/+21
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * ath5k: fix locking in ath5k_configBob Copeland2009-01-291-1/+9
| | | | | | | | | | | | | | | | | | | | ath5k_config updates the software context without taking sc->lock. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: fix kernel oops when ucode DMA memory allocation failureZhu, Yi2009-01-291-0/+4
| | | | | | | | | | | | | | | | | | | | | | The patch fixes memcpy to NULL address when the ucode DMA allocation failure. This is a fix to bug http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1861 Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rtl8187: Fix error in setting OFDM power settings for RTL8187LLarry Finger2009-01-291-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After reports of poor performance, a review of the latest vendor driver (rtl8187_linux_26.1025.0328.2007) for RTL8187L devices was undertaken. A difference was found in the code used to index the OFDM power tables. When the Linux driver was changed, my unit works at a much greater range than before. I think this fixes Bugzilla #12380 and has been tested by at least two other users. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Martín Ernesto Barreyro <barreyromartin@gmail.com> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | e1000: fix bug with shared interrupt during resetJesse Brandeburg2009-01-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | A nasty bug was found where an MTU change (or anything else that caused a reset) could race with the interrupt code. The interrupt code was entered by a shared interrupt during the MTU change. This change prevents the interrupt code from running while the driver is in the middle of its reset path. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r6040: Remove unused variable pdev from drivers/net/r6040.cManish Katiyar2009-01-261-1/+0
| | | | | | | | | | | | | | drivers/net/r6040.c:441: warning: unused variable 'pdev' Signed-off-by: Manish Katiyar <mkatiyar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | virtio_net: use correct accessors for scatterlistsIra W. Snyder2009-01-261-3/+3
|/ | | | | | | | | | | | | Without this fix, virtio_net makes incorrect usage of scatterlists. It sets the end of the scatterlist chain after the first element, despite the fact that more entries come after it. If you try to run dma_map_sg() on one of the scatterlists given to you by add_buf(), you will get a null pointer oops. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-01-2611-23/+1277
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits) [ARM] fix section-based ioremap [NET] am79c961a: fix spin_lock usage [ARM] omap: usb: thou shalt not provide empty release functions [ARM] omap: watchdog: allow OMAP watchdog driver on OMAP34xx platforms [ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3 [ARM] clkdev: fix clock matching [ARM] 5370/1: at91: fix rm9200 watchdog [ARM] 5368/1: arch/arm/mach-davinci/usb.c buildfix [ARM] 5365/1: s3cmci: Use new include path of dma.h [ARM] fix StrongARM-11x0 page copy implementation [ARM] omap: ensure OMAP drivers pass a struct device to clk_get() ARM: OMAP: Fix compile for h3 MMC ARM: OMAP: Remove unused platform devices, v3 ARM: OMAP: Fix ASoC by enabling writes to XCCR and RCCR McBSP registers, v3 ARM: OMAP: Fix OSK ASoC by registering I2C board info for tlvaic23 ARM: OMAP: remove duplicated #include's ARM: OMAP: Fix DMA CCR programming for request line > 63, v3 ARM: OMAP: Fix gpio.c compile on 15xx with CONFIG_DEBUGFS ARM: OMAP: Fix compile for beagle ARM: OMAP: Fix gpio by switching to generic gpio calls, v2 ...
| * [NET] am79c961a: fix spin_lock usageUwe Kleine-König2009-01-241-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | spin_lock functions take a pointer to the lock, not the lock itself. This error was noticed by compiling ebsa110_defconfig for linux-rt where the locking functions obviously are more picky about their arguments. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Roel Kluin <12o3l@tiscali.nl> Cc: Steven Rostedt <srostedt@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] omap: watchdog: allow OMAP watchdog driver on OMAP34xx platformsRussell King2009-01-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | The driver was updated for OMAP34xx, but the Kconfig file was missed. So this adds the missing parts from d99241c in Tony Lindgren's tree: Add watchdog timer support for TI OMAP3430. Signed-off-by: Madhusudhan Chikkature <madhu.cr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3Madhusudhan Chikkature2009-01-243-0/+1253
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add omap hsmmc controller for 2430 and 34xx. Note that this controller has different registers compared to the earlier omap MMC controller, so sharing code currently is not possible. Various updates and fixes from linux-omap list have been merged into this patch. Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 5370/1: at91: fix rm9200 watchdogJean-Christop PLAGNIOL-VILLARD2009-01-241-0/+1
| | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 5365/1: s3cmci: Use new include path of dma.hRamax Lo2009-01-241-1/+1
| | | | | | | | | | | | | | | | | | Since dma.h has been moved to arch/arm/mach-s3c2410/include/mach, use the new include path. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] omap: ensure OMAP drivers pass a struct device to clk_get()Russell King2009-01-243-6/+6
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: OMAP: Fix gpio by switching to generic gpio calls, v2Jarkko Nikula2009-01-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix compile by removing remaining omap specific gpio calls. Based on earlier patches by Jarkko Nikula. Also remove old GPIO key code, there is already a patch to do this with gpio_keys. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2009-01-2649-102/+65
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Warn on deprecated binding model use eeprom: More consistent symbol names eeprom: Move 93cx6 eeprom driver to /drivers/misc/eeprom spi: Move at25 (for SPI eeproms) to /drivers/misc/eeprom i2c: Move old eeprom driver to /drivers/misc/eeprom i2c: Move at24 to drivers/misc/eeprom i2c: Quilt tree has moved i2c: Delete many unused adapter IDs i2c: Delete 10 unused driver IDs
| * | eeprom: More consistent symbol namesJean Delvare2009-01-262-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
| * | eeprom: Move 93cx6 eeprom driver to /drivers/misc/eepromWolfram Sang2009-01-265-9/+9
| | | | | | | | | | | | | | | Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | spi: Move at25 (for SPI eeproms) to /drivers/misc/eepromWolfram Sang2009-01-265-12/+12
| | | | | | | | | | | | | | | Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | i2c: Move old eeprom driver to /drivers/misc/eepromWolfram Sang2009-01-265-12/+12
| | | | | | | | | | | | | | | | | | | | | Update Kconfig text to specify this driver as I2C. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
OpenPOWER on IntegriCloud