summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* net: mvneta: read MAC address from hardware when availableThomas Petazzoni2013-06-041-9/+35
| | | | | | | | | | | | | | | | | | | | | | | | This patch improves the logic used by the mvneta driver to find a MAC address for a particular interface. Until now, it was only looking at the Device Tree, and if no address was found, was falling back to generating a random MAC address. This patch adds the intermediate solution of reading the MAC address from the hardware registers, in case it has been set by the bootloader. So the order is now: 1) MAC address from the Device Tree 2) MAC address from the hardware registers 3) Random MAC address This requires moving the MAC address initialization a little bit later in the ->probe() code, because it now requires the hardware registers to be remapped. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sun4i-emac: fix a typo in emac_probe()Wei Yongjun2013-06-041-1/+1
| | | | | | | | Just fixed a typo in emac_probe(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mv643xx_eth: add missing semicolonArnd Bergmann2013-06-041-3/+5
| | | | | | | | | | | | | | | 76723bca28 "net: mv643xx_eth: add DT parsing support" added a dummy mv643xx_eth_shared_of_probe() fallback function with a typo. This adds the missing semicolon so we can build without CONFIG_OF again, and changes both dummy functions to the more conventional "static inline" syntax, which can avoid potential problems with the empty macro. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller2013-06-0410-51/+30
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Marc Kleine-Budde says: ==================== this is a pull-request for net-next/master. It consists of two patches by Fabio Estevam, cleaning up the flexcan driver (remove default pinctrl and switch to SIMPLE_DEV_PM_OPS). A patch by me to simplify the Kconfig [1] handling for flexcan. And a patch by Jingoo Han that converts the can drivers to use platform_{get,set}_drvdata(). [1] My patch touches arch/{arm,powerpc}, so I collected Acked-bys from Arnd Bergmann, Shawn Guo and Benjamin Herrenschmidt. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: can: use platform_{get,set}_drvdata()Jingoo Han2013-06-038-30/+20
| | | | | | | | | | | | | | | | | | | | | | | | Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Also, unnecessary dev_set_drvdata() is removed, because the driver core clears the driver data to NULL after device_release or on probe failure. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: flexcan: remove HAVE_CAN_FLEXCAN Kconfig symbolMarc Kleine-Budde2013-06-031-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the Kconfig symbol HAVE_CAN_FLEXCAN from arch/{arm,powerpc} and allowing compilation unconditionally on all arm and powerpc platforms. This brings a bigger compile time coverage and removes the following dependency warning found by Arnd Bergmann: warning: (SOC_IMX28 && SOC_IMX25 && SOC_IMX35 && IMX_HAVE_PLATFORM_FLEXCAN && SOC_IMX53 && SOC_IMX6Q) selects HAVE_CAN_FLEXCAN which has unmet direct dependencies (NET && CAN && CAN_DEV) Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: flexcan: Use SIMPLE_DEV_PM_OPSFabio Estevam2013-06-031-11/+9
| | | | | | | | | | | | | | | | | | Using SIMPLE_DEV_PM_OPS can make the code smaller and simpler. Also change CONFIG_PM to CONFIG_PM_SLEEP. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: flexcan: Let device core handle pinctrlFabio Estevam2013-06-031-6/+0
| | | | | | | | | | | | | | | | | | | | | | Since commit ab78029 (drivers/pinctrl: grab default handles from device core) we can rely on device core for handling pinctrl, so remove devm_pinctrl_get_select_default() from the driver. Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: <linux-can@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | net: emaclite: Fix typo in error messageJens Renner \(EFE\)2013-06-041-1/+1
| | | | | | | | | | | | | | | | s/allocal/allocate/ Signed-off-by: Jens Renner <renner@efe-gmbh.de> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: ethernet: cpsw: add phy-mode support to cpsw driverMugunthan V N2013-06-041-0/+2
| | | | | | | | | | | | | | | | Adding phy-mode support to cpsw driver and updating the cpsw binding documentation. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: phy: at803x: add support for AT8031Mugunthan V N2013-06-041-0/+15
| | | | | | | | | | | | | | This patch adds support for Atheros 8031 phy driver. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: phy: at803x: add interface mode supportMugunthan V N2013-06-041-0/+16
| | | | | | | | | | | | | | | | | | This patch adds support for RGMII TX delay configuration on Atheros 803X, this can be enabled in debug registers. With this patch, PHY_INTERFACE_MODE_RGMII_TXID modes are now supported. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: phy: at803x: seperate wol specific code to wol standard apisMugunthan V N2013-06-041-16/+48
| | | | | | | | | | | | | | | | | | | | WOL is initilized in phy config_init, but there are standard apis (set_wol/get_wol) for WOL in phy frame work. So this patch moves WOL specific code from config_init to wol standard apis. Cc: Matus Ujhelyi <ujhelyi.m@gmail.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: phy: at803x code cleanup on register and unregister driverMugunthan V N2013-06-041-25/+10
|/ | | | | | | | | Make use of phy_drivers_register/phy_drivers_unregister to register/unregister multiple phy drivers in a single module. Cc: Matus Ujhelyi <ujhelyi.m@gmail.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: remove redundant pm init codeYijing Wang2013-06-031-21/+3
| | | | | | | | | Pci_enable_device() will set device pm state to D0, so it's no need to do it again in tg3_init_one(). Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ssb: sprom: replace strict_strtoul() with kstrtoul()Jingoo Han2013-06-031-1/+1
| | | | | | | | | The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wireless: replace strict_strtoul() with kstrtoul()Jingoo Han2013-06-037-14/+14
| | | | | | | | | The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: replace strict_strtoul() with kstrtoul()Jingoo Han2013-06-032-4/+4
| | | | | | | | | The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: can: replace strict_strtoul() with kstrtoul()Jingoo Han2013-06-034-4/+4
| | | | | | | | | The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ibm-ethernet: delete stale MCA and duplicate PSERIES dependencyPaul Gortmaker2013-06-031-2/+1
| | | | | | | | | | | MCA support has been removed but this dependency escaped removal. Also, there is a duplicate PPC_PSERIES dependency that appeared when the ethernet drivers were separated into vendor/model specific directories, so we remove that here as well. Reported-by: Robert de Rooy <robert.de.rooy@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: fix a power state testYuval Mintz2013-06-021-1/+2
| | | | | | | | | | | If PCIe supports PM capabilities, bnx2x will always claim eeprom is accessible as PCI_D0 is zero. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: semi-Semantic changesYuval Mintz2013-06-021-6/+8
| | | | | | | | | | | | This patch includes a few changes that change the driver's flow without truly changing anything in its functionality - use usleep_range for short sleeps instead of msleep and initialize Tx consumer during initialization for better information during errors. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Revise printsYuval Mintz2013-06-029-84/+224
| | | | | | | | | | This patch revises many bnx2x prints - mainly fixing print typos and adding some new debug prints (mostly for parity issues). Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Semantic removal and beautificationYuval Mintz2013-06-022-22/+13
| | | | | | | | | | | | | | This patch introduces several small changes to the driver, none which actually change any flow: 1. Removes prototypes of unexisting functions and unused defines. 2. Fixes alignment and spacing issues. 3. Changes numeric usage into constants. 4. Remove unnecessary parenthesis. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Revise comments and alignmentYuval Mintz2013-06-0212-307/+251
| | | | | | | | | | This patch correct various typos, fix comments conventions and adds/removes a few comments. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Semantic change of empty linesYuval Mintz2013-06-0214-160/+3
| | | | | | | | | | This patch removes unnecessary blank lines and adds a few where such are needed (between variable declarations and code) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: use XPS if possible for bnx2x_select_queue instead of pure hashEric Dumazet2013-06-011-1/+1
| | | | | | | | | | | | | | | | | The bnx2x_select_queue() was using __skb_tx_hash() to select the transmit queue, totally ignoring XPS settings, while XPS can help performance quite significantly, so change the bnx2x_select_queue() to use __dev_pick_tx() instead which will use XPS if configured. Based on patches from Ying Cai and Havard Skinnemoen Reported-by: govindarajulu.v <govindarajulu90@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Havard Skinnemoen <hskinnemoen@google.com> Cc: Ying Cai <ycai@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Force uninitialized state if FW_ON_ADAPTER is < FW_VERSION and we're ↵Jay Hernandez2013-05-313-3/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | the MASTER_PF Forcing uninitialized state allows us to upgrade and reinitialize the adapter. FW_VERSION_T4 = 1.4.0.0 FW_VERSION_T5 = 0.0.0.0 At this point driver supports above and greater than above version of firmware. If it doesn't find the required firmware version than it forces the adapter to be reinitialized as shown below. 1) If FW_ON_ADAPTER < FW_VERSION and we're the MASTER_PF force uninitialized state and a FW upgrade if available. - If FW_ON_ADAPTER < /lib/firmware/cxgb4/t*fw.bin we will update the adapters FW. - If FW_ON_ADAPTER >= /lib/firmware/cxgb4/t*fw.bin don't upgrade FW. - If upgrade_fw() fails force reinitialization of the adapter anyways, it might still work. Either way forcing the uninitialized state allows cxgb4 reinitialize FW. 2) If FW_ON_ADAPTER >= FW_VERSION driver follows normal path. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Implement initiate FW dump feature for LancerSomnath Kotur2013-05-316-35/+105
| | | | | | | | | | Added code to initiate FW dump via ethtool. Driver checks if the previous dump has been cleared before initiating the dump. It doesn't initiate the dump if it is not cleared. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: davinci_cpdma: remove CRC bytes from skb added by CPDMAMugunthan V N2013-05-311-0/+5
| | | | | | | | | | | Additional 4 bytes found in the skb is the CRC calculated by the CPDMA hardware, check the CRC bit in CPDMA status field of Descriptor and remove the CRC length from the skb. This extra 4 byte can be seen when capturing packets using tcpdump. This has been tested in TI816x platform. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add MDIO bus driver for the Allwinner EMACMaxime Ripard2013-05-313-0/+205
| | | | | | | | | This patch adds a separate driver for the MDIO interface of the Allwinner ethernet controllers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add EMAC ethernet driver found on Allwinner A10 SoC'sStefan Roese2013-05-316-0/+1111
| | | | | | | | | | | | | | The Allwinner A10 has an ethernet controller that seem to be developped internally by them. The exact feature set of this controller is unknown, since there is no public documentation for this IP, and this driver is mostly the one published by Allwinner that has been heavily cleaned up. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: add reverse MII PHY connection typeFlorian Fainelli2013-05-311-0/+1
| | | | | | | | | The PHY library currently does not know about the the reverse MII connection type. Add it to the list of supported PHY modes and update of_get_phy_mode() to support it and look for the string "rev-mii". Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tulip: remove redundant D0 power state setYijing Wang2013-05-311-6/+0
| | | | | | | | pci_enable_device() will set device power state to D0, so it's no need to do it again in tulip_init_one(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlcnic: remove redundant D0 power state setYijing Wang2013-05-311-1/+0
| | | | | | | | pci_enable_device() will set device power state to D0, so it's no need to do it again in qlcnic_attach_func(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net, jme: remove redundant D0 power state setYijing Wang2013-05-311-1/+0
| | | | | | | | pci_enable_device() will set device power state to D0, so it's no need to do it again in jme_init_one(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add Marvell 88E1510 phy IDMichal Simek2013-05-311-0/+25
| | | | | | | | | | Add support for this new phy ID. Signed-off-by: Rick Hoover <RHoover@digilentinc.com> Signed-off-by: Steven Wang <steven.wang@digilentinc.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add Marvell 88E1116R phy IDMichal Simek2013-05-311-0/+65
| | | | | | | | This phy is on Xilinx ZC702 zynq development board. Signed-off-by: Anirudha Sarangi <anirudh@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Use macros instead of hardcoded values in marvell phy driverMichal Simek2013-05-311-9/+9
| | | | | | | | Use macros from linux/marvell_phy.h instead of duplicate magic phy ID in the driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add Vitesse 8211 phy IDMichal Simek2013-05-311-0/+15
| | | | | | | Phy is compatible with Vitesse 8221. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Clean coding style in vitesse phyMichal Simek2013-05-311-12/+11
| | | | | | | | | - Remove trailing white space - Remove spaces before tag - Fix comments Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mv643xx_eth: add DT parsing supportSebastian Hesselbarth2013-05-301-4/+149
| | | | | | | | | | This adds device tree parsing support for the shared driver of mv643xx_eth. As the bindings are slightly different from current PPC bindings new binding documentation is also added. Following PPC-style device setup, the shared driver now also adds port platform_devices and sets up port platform_data. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mv643xx_eth: proper initialization for Kirkwood SoCsSebastian Hesselbarth2013-05-301-0/+11
| | | | | | | | | | | | | | | | Ethernet controllers found on Kirkwood SoCs not only suffer from loosing MAC address register contents on clock gating but also some important registers are reset to values that would break ethernet. This patch clears the CLK125_BYPASS_EN bit for DT enabled Kirkwood only by using of_device_is_compatible() instead of #ifdefs. Non-DT Kirkwood is not affected as it installs a clock gating workaround because of the MAC address issue above. Other Orion SoCs do not suffer from register reset, do not have the bit in question, or do not have the register at all. Moreover, system controllers on PPC using this driver should also be protected from clearing that bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mv643xx_eth: use of_phy_connect if phy_node presentSebastian Hesselbarth2013-05-301-7/+18
| | | | | | | | This connects to a phy node passed to the port device instead of probing the phy by phy_addr. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mv643xx_eth: use managed devm_ioremap for port registersSebastian Hesselbarth2013-05-301-2/+1
| | | | | | | Make use of managed devm_ioremap and remove corresponding iounmap. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mv643xx_eth: use phy_disconnect instead of phy_detachSebastian Hesselbarth2013-05-301-1/+1
| | | | | | | | | | | Using a separated mdio bus driver with mvmdio, phy_detach on network device removal will not stop the phy and finally lead to NULL pointer dereference in mvmdio due to non-existent network device. Use phy_disconnect instead to properly stop phy device from accessing network device prior removal of the network device. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: emaclite: Update driver headerMichal Simek2013-05-301-2/+2
| | | | | | | Correct email address and years. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: emaclite: Enable emaclite for Xilinx Arm Zynq platformMichal Simek2013-05-301-2/+2
| | | | | | | Enable emaclite for Xilinx ARM Zynq platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: emaclite: Do not use microblaze and ppc IO functionsMichal Simek2013-05-301-69/+69
| | | | | | | | | Emaclite can be used on ARM zynq where in_be32/out_be32 IO functions are not present. Use standard __raw_readl/__raw_writel IO functions instead. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: emaclite: Let's make xemaclite_adjust_link staticMichal Simek2013-05-301-1/+1
| | | | | | | | | | xemaclite_adjust_link is used locally. It removes sparse warning: drivers/net/ethernet/xilinx/xilinx_emaclite.c:916:6: warning: symbol 'xemaclite_adjust_link' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud