summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* [ARM] Fix sparse warningsRussell King2005-10-281-1/+1
| | | | | | | | Fix sparse warnings in arch/arm/kernel/module.c, arch/arm/mm/consistent.c, drivers/pcmcia/sa1111_generic.c, and platform support files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3/4: Remove asm/hardware.h from SA1100 io.hRussell King2005-10-281-0/+1
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3/4: Remove asm/hardware.h from Versatile and Integrator io.hRussell King2005-10-284-0/+4
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2/4: Remove asm/hardware.h from asm-arm/arch-ebsa110/io.hRussell King2005-10-281-0/+1
| | | | | | | EBSA110 only requires hardware.h to be included for a couple of files. Move the include there. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] cpufreq: SMP fix for conservative governorDave Jones2005-10-271-3/+3
| | | | | | | | | | | | Don't try to access not-present CPUs. Conservative governor will always oops on SMP without this fix. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=4781 Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2005-10-261-1/+25
|\
| * [SERIAL] new hp diva console portJustin Chen2005-10-241-0/+1
| | | | | | | | | | | | | | | | Add the new ID 0x132a and configure the new PCI Diva console port. This device supports only 1 single console UART. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [SERIAL] support the Exsys EX-4055 4S four-port cardBjorn Helgaas2005-10-241-1/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested by Wolfgang Denk with this device: 00:0f.0 Network controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01) Subsystem: Exsys EX-4055 4S(16C550) RS-232 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=128] Region 1: I/O ports at 7080 [size=128] Region 2: I/O ports at 7400 [size=32] 00:0f.0 Class 0280: 10b5:9050 (rev 01) Subsystem: d84d:4055 Results with this patch: Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PCI: Found IRQ 10 for device 0000:00:0f.0 ttyS4 at I/O 0x7400 (irq = 10) is a 16550A ttyS5 at I/O 0x7408 (irq = 10) is a 16550A ttyS6 at I/O 0x7410 (irq = 10) is a 16550A ttyS7 at I/O 0x7418 (irq = 10) is a 16550A Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [PATCH] fix radeon_cp_init_ring_buffer()Ivan Kokshaysky2005-10-261-5/+6
| | | | | | | | | | | | | | | | | | | | I've seen similar failure on alpha. Obviously, someone forgot to convert sg->handle stuff for PCI gart case. Signed-off-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] md: make sure mdthreads will always respond to kthread_stopNeilBrown2005-10-261-4/+6
| | | | | | | | | | | | | | | | | | | | | | There are still a couple of cases where md threads (the resync/recovery thread) is not interruptible since the change to use kthreads. All places there it tests "signal_pending", it should also test kthread_should_stop, as with this patch. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | PCI: be more verbose about resource quirksLinus Torvalds2005-10-251-13/+88
| | | | | | | | | | | | | | | | | | | | When reserving an PCI quirk, note that in the kernel bootup messages. Also, parse the strange PIIX4 device resources - they should get their own PCI resource quirks, but for now just print out what it finds to verify that the code does the right thing. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] qlogic lockup fixAndrew Morton2005-10-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If qla2x00_probe_one()'s call to qla2x00_iospace_config() fails, we call qla2x00_free_device() to clean up. But because ha->dpc_pid hasn't been set yet, qla2x00_free_device() tries to stop a kernel thread which hasn't started yet. It does wait_for_completion() against an uninitialised completion struct and the kernel hangs up. Fix it by initialising ha->dpc_pid a bit earlier. Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Return the line length via sysfs for fbdevJames Simmons2005-10-241-0/+8
|/ | | | | | | | This small patch returns the stride/line length of the framebuffer via sysfs. Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6Linus Torvalds2005-10-235-8/+17
|\
| * [SCSI] scsi_error thread exits in TASK_INTERRUPTIBLE state.Steven Rostedt2005-10-191-0/+2
| | | | | | | | | | | | | | | | Found in the -rt patch set. The scsi_error thread likely will be in the TASK_INTERRUPTIBLE state upon exit. This patch fixes this bug. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] mptsas: fix phy identifiersChristoph Hellwig2005-10-171-4/+8
| | | | | | | | | | | | | | | | | | | | This patch from Eric fixes handling of the phy identifiers in mptsas. I've split it up from his bigger patch as it should go into 2.6.14 still. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] 2.6.13.3; add Pioneer DRM-624x to drivers/scsi/scsi_devinfo.cKarl Magnus Kolstoe2005-10-171-0/+1
| | | | | | | | | | | | | | | | The patch below should make the Pioneer DRM-624X automatically be set up with all 6 "drives". (6 slot SCSI CD changer) Signed-off-by: Karl Magnus Kolstø <karl.kolsto@uib.no> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] Fix leak of Scsi_CmndsAlan Stern2005-10-161-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | When a request is deferred in scsi_init_io because the sg table could not be allocated, the associated scsi_cmnd is not released and the request is not marked with REQ_DONTPREP. When the command is retried, if scsi_prep_fn decides to kill it then the scsi_cmnd will never be released. This patch (as573) changes scsi_init_io so that it calls scsi_put_command before deferring a request. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] FW: [PATCH] for Deadlock in transport_fcJames.Smart@Emulex.Com2005-10-161-3/+10
| | | | | | | | | | | | | | Cannot call fc_rport_terminate() under the host lock, so drop the lock. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] Fix aacraid regressionSalyzyn, Mark2005-10-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Juan was kind enough to linger on site, and work on a production machine, to try the parameter to make the system stable. He discovered that reducing the maximum transfer size issued to the adapter to 128KB stabilized his system. This is related to an earlier change for the 2.6.13 tree resulting from Martin Drab's testing where the transfer size was reduced from 4G to 256KB; we needed to go still further in scaling back the request size. Here is the patch that tames this regression. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] NCR5380: fix undefined preprocessor identifierRandy Dunlap2005-10-161-1/+1
| | | | | | | | | | | | | | | | | | Fix 12 undefined preprocessor identifier warnings (4 each in 3 driver builds): drivers/scsi/NCR5380.c:2744:16: warning: undefined preprocessor identifier 'NDEBUG_ABORT' drivers/scsi/NCR5380.c:2744:16: warning: "NDEBUG_ABORT" is not defined Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | [PATCH] ib: mthca: Always re-arm EQs in mthca_tavor_interrupt()Roland Dreier2005-10-231-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | We should always re-arm an event queue's interrupt in mthca_tavor_interrupt() if the corresponding bit is set in the event cause register (ECR), even if we didn't find any entries in the EQ. If we don't, then there's a window where we miss an EQ entry and then get stuck because we don't get another EQ event. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Kconfig: saa7134-dvb should not select cx22702Mike Krufky2005-10-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On 2005-05-01, Gerd Knorr sent in a patch to add cx22702 to cx88-dvb: [PATCH] dvb: cx22702 frontend driver update http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=9990d744bea7d28e83c420e2c9d524c7a8a2d136 ...but as we can see, the Kconfig portion of his patch was incorrectly applied to saa7134-dvb instead of cx88-dvb. On 2005-06-24, Adrian bunk fixed cx88-dvb: [PATCH] VIDEO_CX88_DVB must select DVB_CX22702 http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=d6988588e13616587aa879c2e0bd7cd811705e5d ...but we never removed the original patch from Gerd. This patch sets things straight: saa7134-dvb should not select cx22702 Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | cardbus: limit IO windows to 256 bytesLinus Torvalds2005-10-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | That's what we've always historically done, and bigger windows seem to confuse some cardbus bridges. Or something. Alan reports that this makes the ThinkPad 600x series work properly again: the 4kB IO window for some reason made IDE DMA not work, which makes IDE painfully slow even if it works after DMA timeouts. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] drm: another mga bugDave Airlie2005-10-213-3/+4
| | | | | | | | | | | | | | | | The wrong state emission routines were being called for G550, and consistent maps weren't correctly mapped... Signed-off-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] mptsas: fix phy identifiersEric Moore2005-10-211-4/+8
| | | | | | | | | | | | | | | | | | This fixes handling of the phy identifiers in mptsas. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> [ split it a pre-2.6.14 portion from Eric's bigger patch ] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] scsi_error thread exits in TASK_INTERRUPTIBLE state.Steven Rostedt2005-10-191-0/+2
| | | | | | | | | | | | | | | | Found in the -rt patch set. The scsi_error thread likely will be in the TASK_INTERRUPTIBLE state upon exit. This patch fixes this bug. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] `unaligned access' in acpi get_root_bridge_busnr()Peter Chubb2005-10-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | In drivers/acpi/glue.c the address of an integer is cast to the address of an unsigned long. This breaks on systems where a long is larger than an int --- for a start the int can be misaligned; for a second the assignment through the pointer will overwrite part of the next variable. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Acked-by: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] fix MGA DRM regression before 2.6.14Dave Airlie2005-10-191-3/+19
| | | | | | | | | | | | | | | | | | | | | | | | I've gotten a report on lkml, of a possible regression in the MGA DRM in 2.6.14-rc4 (since -rc1), I haven't been able to reproduce it here, but I've figured out some possible issues in the mga code that were definitely wrong, some of these are from DRM CVS, the main fix is the agp enable bit on the old code path still used by everyone..... Signed-off-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Three one-liners in md.cNeilBrown2005-10-191-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The main problem fixes is that in certain situations stopping md arrays may take longer than you expect, or may require multiple attempts. This would only happen when resync/recovery is happening. This patch fixes three vaguely related bugs. 1/ The recent change to use kthreads got the setting of the process name wrong. This fixes it. 2/ The recent change to use kthreads lost the ability for md threads to be signalled with SIG_KILL. This restores that. 3/ There is a long standing bug in that if: - An array needs recovery (onto a hot-spare) and - The recovery is being blocked because some other array being recovered shares a physical device and - The recovery thread is killed with SIG_KILL Then the recovery will appear to have completed with no IO being done, which can cause data corruption. This patch makes sure that incomplete recovery will be treated as incomplete. Note that any kernel affected by bug 2 will not suffer the problem of bug 3, as the signal can never be delivered. Thus the current 2.6.14-rc kernels are not susceptible to data corruption. Note also that if arrays are shutdown (with "mdadm -S" or "raidstop") then the problem doesn't occur. It only happens if a SIGKILL is independently delivered as done by 'init' when shutting down. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] raw1394: fix locking in the presence of SMP and interruptsAndy Wingo2005-10-192-49/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes all spinlocks that can be held during an irq handler to disable interrupts while the lock is held. Changes spin_[un]lock_irq to use the irqsave/irqrestore variants for robustness and readability. In raw1394.c:handle_iso_listen(), don't grab host_info_lock at all -- we're not accessing host_info_list or host_count, and holding this lock while trying to tasklet_kill the iso tasklet this can cause an ABBA deadlock if ohci:dma_rcv_tasklet is running and tries to grab host_info_lock in raw1394.c:receive_iso. Test program attached reliably deadlocks all SMP machines I have been able to test without this patch. Signed-off-by: Andy Wingo <wingo@pobox.com> Acked-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] orinoco: limit message rateAndrew Morton2005-10-191-2/+3
| | | | | | | | | | | | | | | | | | | | Brice Goglin <Brice.Goglin@ens-lyon.org> reports a printk storm from this driver. Fix. Acked-by: David Gibson <hermes@gibson.dropbear.id.au> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] vesafb: Fix display corruption on display blankAntonino A. Daplas2005-10-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported by: Bob Tracy <rct@gherkin.frus.com> "...I've got a Toshiba notebook (730XCDT -- Pentium 150MMX) for which I'm using the Vesa FB driver. When the machine has been idle for some time and the driver attempts to powerdown the display, rather than the display going blank, it goes gray with several strange lines. When I hit the "shift" key or other-wise wake up the display, the old video state is not fully restored..." vesafb recently added a blank method which has only 2 states, powerup and powerdown. The powerdown state is used for all blanking levels, but in his case, powerdown does not work correctly for higher levels of display powersaving. Thus, for intermediate power levels, use software blanking, and use only hardware blanking for an explicit powerdown. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2005-10-181-0/+2
|\ \
| * | [SERIAL] Add SupraExpress 56i supportmaximilian attems2005-10-151-0/+2
| |/ | | | | | | | | | | | | | | The modem is said to work with belows addition to pnp_dev_table[]: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=296011 Signed-off-by: maximilian attems <janitor@sternwelten.at> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Add some basic .gitignore filesLinus Torvalds2005-10-183-0/+14
| | | | | | | | | | | | | | | | This still leaves driver and architecture-specific subdirectories alone, but gets rid of the bulk of the "generic" generated files that we should ignore. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] uniput - fix crash on SMPDmitry Torokhov2005-10-171-2/+2
| | | | | | | | | | | | | | | | | | Only signal completion after marking request slot as free, otherwise other processor can free request structure before we finish using it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Fix /proc/acpi/events around suspendPavel Machek2005-10-171-3/+2
| | | | | | | | | | | | | | | | | | Fix -EIO on /proc/acpi/events after suspends. This actually breaks suspending by power button in many setups. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] n_r3964 mod_timer() fixStephan Brodkorb2005-10-171-4/+4
| | | | | | | | | | | | | | | | | | | | | | Since Revision 1.10 was released the n_r3964 module wasn't able to receive any data. The reason for that behavior is because there were some wrong calls of mod_timer(...) in the function receive_char (...). This patch should fix this problem and was successfully tested with talking to some kuka industrial robots. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Fix and clean up quirk_intel_ide_combined() configurationJeff Garzik2005-10-172-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change makes quirk_intel_ide_combined() dependent on the precise conditions under which it is needed: * IDE is built in * IDE SATA option is not set * ata_piix or ahci drivers are enabled This fixes an issue where some modular configurations would not cause the quirk to be enabled. Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus torvalds <torvalds@osdl.org>
* | [PATCH] USB: fix bug in handling of highspeed usb HID devicesChristian Krause2005-10-171-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During the development of an USB device I found a bug in the handling of Highspeed HID devices in the kernel. What happened? Highspeed HID devices are correctly recognized and enumerated by the kernel. But even if usbhid kernel module is loaded, no HID reports are received by the kernel. The output of the hardware USB analyzer told me that the host doesn't even poll for interrupt IN transfers (even the "interrupt in" USB transfer are polled by the host). After some debugging in hid-core.c I've found the reason. In case of a highspeed device, the endpoint interval is re-calculated in driver/usb/input/hid-core.c: line 1669: /* handle potential highspeed HID correctly */ interval = endpoint->bInterval; if (dev->speed == USB_SPEED_HIGH) interval = 1 << (interval - 1); Basically this calculation is correct (refer to USB 2.0 spec, 9.6.6). This new calculated value of "interval" is used as input for usb_fill_int_urb: line 1685: usb_fill_int_urb(hid->urbin, dev, pipe, hid->inbuf, 0, hid_irq_in, hid, interval); Unfortunately the same calculation as above is done a second time in usb_fill_int_urb in the file include/linux/usb.h: line 933: if (dev->speed == USB_SPEED_HIGH) urb->interval = 1 << (interval - 1); else urb->interval = interval; This means, that if the endpoint descriptor (of a high speed device) specifies e.g. bInterval = 7, the urb->interval gets the value: hid-core.c: interval = 1 << (7-1) = 0x40 = 64 urb->interval = 1 << (interval -1) = 1 << (63) = integer overflow Because of this the value of urb->interval is sometimes negative and is rejected in core/urb.c: line 353: /* too small? */ if (urb->interval <= 0) return -EINVAL; The conclusion is, that the recalculaton of the interval (which is necessary for highspeed) should not be made twice, because this is simply wrong. ;-) Re-calculation in usb_fill_int_urb makes more sense, because it is the most general approach. So it would make sense to remove it from hid-core.c. Because in hid-core.c the interval variable is only used for calling usb_fill_int_urb, it is no problem to remove the highspeed re-calculation in this file. Signed-off-by: Christian Krause <chkr@plauener.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] isp116x-hcd: fix handling of short transfersOlav Kongas2005-10-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increased use of scatter-gather by usb-storage driver after 2.6.13 has exposed a buggy codepath in isp116x-hcd, which was probably never visited before: bug happened only for those urbs, for which URB_SHORT_NOT_OK was set AND short transfer occurred. The fix attached was tested in 2 ways: (a) it fixed failing initialization of a flash drive with an embedded hub; (b) the fix was tested with 'usbtest' against a modified g_zero driver (on top of net2280), which generated short bulk IN transfers of various lengths including multiples and non-multiples of max_packet_length. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] fix black/white-only svideo input in vpx3220 decoderRonald S. Bultje2005-10-171-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Fix the fact that the svideo input will only give input in black/white in some circumstances. Reason is that in the PCI controller driver (zr36067), after setting input, we reset norm, which overwrites the input register with the default. This patch makes it always set the correct value for the input when changing norm. Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] fix vpx3220 offset issue in SECAMRonald S. Bultje2005-10-171-12/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix bug #5404 in kernel bugzilla. It basically updates the vpx3220 initialization tables with some newer values that we've had in CVS for a while (and that, for some reason, never ended up in the kernel... must've gotten lost). Those fix a ~16 pixels noise at the top of the picture in at least SECAM, although (now that I think about it) PAL was probably affected, also. Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] SVGATextMode fixSamuel Thibault2005-10-171-2/+7
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix bug 5441. I didn't know about messy programs like svgatextmode... Couldn't this be integrated in some linux/drivers/video/console/svgacon.c ?... So because of the existence of the svgatextmode program, the kernel is not supposed to touch to CRT_OVERFLOW/SYNC_END/DISP/DISP_END/OFFSET ? Disabling the check in vgacon_resize() might help indeed, but I'm really not sure whether it will work for any chipset: in my patch, CRT registers are set at each console switch, since stty rows/cols apply to consoles separately... The attached solution is to keep the test, but if it fails, we assume that the caller knows what it does (i.e. it is svgatextmode) and then disable any further call to vgacon_doresize. Svgatextmode is usually used to _expand_ the display, not to shrink it. And it is harmless in the case of a too big stty rows/cols: the display will just be cropped. I tested it on my laptop, and it works fine with svgatextmode. A better solution would be that svgatextmode explicitely tells the kernel not to care about video timing, but for this an interface needs be defined and svgatextmode be patched. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] usbserial: Regression in USB generic serial driverRandall Nortman2005-10-141-1/+1
| | | | | | | | | | | | Kernel version 2.6.13 introduced a regression in the generic USB serial converter driver (usbserial.o, drivers/usb/serial/generic.c). The bug manifests, as far as I can tell, whenever you attempt to write to the device -- the write will never complete (write() returns 0, or blocks). Signed-off-by: Randall Nortman <oss@wonderclown.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2005-10-141-4/+35
|\
| * [QLOGICPTI]: Handle INQUIRY response sniffing correctly.David S. Miller2005-10-141-4/+35
| | | | | | | | | | | | | | | | | | These days, in 2.6.x, even INQUIRY commands are sent using scatter gather lists. Bug reported by Tom 'spot' Callaway. Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2005-10-141-0/+2
|\ \
| * | [SERIAL] Add SupraExpress 336i Sp ASVD modem IDBaris Cicek2005-10-141-0/+2
| |/ | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud