summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* crypto: talitos - add support for 36 bit addressingKim Phillips2009-08-132-29/+41
| | | | | | | | | Enabling extended addressing in the h/w requires we always assign the extended address component (eptr) of the talitos h/w pointer. This is for e500 based platforms with large memories. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: talitos - align locks on cache linesKim Phillips2009-08-131-83/+58
| | | | | | | | | | align channel access locks onto separate cache lines (for performance reasons). This is done by placing per-channel variables into their own private struct, and using the cacheline_aligned attribute within that struct. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: talitos - simplify hmac data size calculationKim Phillips2009-08-131-5/+3
| | | | | | | | don't do request->src vs. assoc pointer math - it's the same as adding assoclen and ivsize (just with more effort). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: mv_cesa - Add support for Orion5X crypto engineSebastian Andrzej Siewior2009-08-104-0/+739
| | | | | | | | | | This adds support for Marvell's Cryptographic Engines and Security Accelerator (CESA) which can be found on a few SoC. Tested with dm-crypt. Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: padlock - Fix hashing of partial blocksHerbert Xu2009-07-161-0/+2
| | | | | | | | When we encounter partial blocks in finup, we'll invoke the xsha instruction with a bogus count that is not a multiple of the block size. This patch fixes it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: padlock - Fix compile error on i386Herbert Xu2009-07-151-2/+4
| | | | | | | | | | The previous change to allow hashing from states other than the initial broke compilation on i386 because the inline assembly tried to squeeze a u64 into a 32-bit register. As we've already checked for 32-bit overflows we can simply truncate it to u32, or unsigned long so that we don't truncate at all on x86-64. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: crypto4xx - Disable SHA implementationHerbert Xu2009-07-151-19/+0
| | | | | | | | | | The crypto4xx SHA implementation keeps the hash state in the tfm data structure. This breaks a fundamental requirement of ahash implementations that they must be reentrant. This patch disables the broken implementation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: crypto4xx - Switch to new style ahashHerbert Xu2009-07-142-39/+71
| | | | | | | | | | | | This patch changes crypto4xx to use the new style ahash type. In particular, we now use ahash_alg to define ahash algorithms instead of crypto_alg. This is achieved by introducing a union that encapsulates the new type and the existing crypto_alg structure. They're told apart through a u32 field containing the type value. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: crypto4xx - Use crypto_ahash_set_reqsizeHerbert Xu2009-07-142-2/+4
| | | | | | | This patch makes crypto4xx use crypto_ahash_set_reqsize to avoid accessing crypto_ahash directly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: padlock - Switch sha to shashHerbert Xu2009-07-142-179/+156
| | | | | | | | | | | | | | | | | | | This patch converts the padlock-sha implementation to shash. In doing so the existing mechanism of storing the data until final is no longer viable as we do not have a way of allocating data in crypto_shash_init and then reliably freeing it. This is just as well because a better way of handling the problem is to hash everything but the last chunk using normal sha code and then provide the intermediate result to the padlock device. This is good enough because the primary application of padlock-sha is IPsec and there the data is laid out in the form of an hmac header followed by the rest of the packet. In essence we can provide all the data to the padlock as the hmac header only needs to be hashed once. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: padlock - Use shash fallback for shaHerbert Xu2009-07-111-30/+52
| | | | | | This patch changes padlock sha fallback to shash instead of hash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* hwrng: Use PCI_VDEVICEJoe Perches2009-06-252-4/+3
| | | | | | Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* random: Add optional continuous repetition test to entropy store based rngsNeil Horman2009-06-181-0/+14
| | | | | | | | | | | | | | | | FIPS-140 requires that all random number generators implement continuous self tests in which each extracted block of data is compared against the last block for repetition. The ansi_cprng implements such a test, but it would be nice if the hw rng's did the same thing. Obviously its not something thats always needed, but it seems like it would be a nice feature to have on occasion. I've written the below patch which allows individual entropy stores to be flagged as desiring a continuous test to be run on them as is extracted. By default this option is off, but is enabled in the event that fips mode is selected during bootup. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: padlock-aes - work around Nano CPU errata in CBC modeChuck Ebbert2009-06-181-18/+65
| | | | | | | | | Extend previous workarounds for the prefetch bug to cover CBC mode, clean up the code a bit. Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Acked-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: padlock-aes - work around Nano CPU errata in ECB modeChuck Ebbert2009-06-181-35/+46
| | | | | | | | | | | The VIA Nano processor has a bug that makes it prefetch extra data during encryption operations, causing spurious page faults. Extend existing workarounds for ECB mode to copy the data to an temporary buffer to avoid the problem. Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Acked-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Fix pci_claim_resourceMatthew Wilcox2009-06-171-2/+2
| | | | | | | | | | Instead of starting from the iomem or ioport roots, start from the parent bus' resources. This fixes a bug where child resources would appear above their parents resources if they had the same size. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'release' of ↵Linus Torvalds2009-06-172-4/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Convert ia64 to use int-ll64.h [IA64] Fix build error in paravirt_patchlist.c [IA64] ia64 does not need umount2() syscall [IA64] hook up new rt_tgsigqueueinfo syscall [IA64] msi_ia64.c dmar_msi_type should be static [IA64] remove obsolete hw_interrupt_type [IA64] remove obsolete irq_desc_t typedef [IA64] remove obsolete no_irq_type [IA64] unexport fpswa.h
| * Pull for-2.6.31 into releaseTony Luck2009-06-172-4/+5
| |\
| | * [IA64] Convert ia64 to use int-ll64.hMatthew Wilcox2009-06-172-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is generally agreed that it would be beneficial for u64 to be an unsigned long long on all architectures. ia64 (in common with several other 64-bit architectures) currently uses unsigned long. Migrating piecemeal is too painful; this giant patch fixes all compilation warnings and errors that come as a result of switching to use int-ll64.h. Note that userspace will still see __u64 defined as unsigned long. This is important as it affects C++ name mangling. [Updated by Tony Luck to change efi.h:efi_freemem_callback_t to use u64 for start/end rather than unsigned long] Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | | Merge branch 'for-next' of ↵Linus Torvalds2009-06-1715-16/+1844
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: early init for MFD running regulators mfd: fix tmio related warnings mfd: asic3: enable SD/SDIO cell mfd: asic3: enable DS1WM cell mfd: asic3: remove SD/SDIO controller register definitions mfd: asic3: use resource_size macro instead of local variable mfd: add ASIC3 IRQ numbers mfd: asic3: add clock handling for MFD cells mfd: asic3: add asic3_set_register common operation mfd: Fix Kconfig help text for WM8350 mfd: add PCAP driver mfd: add U300 AB3100 core support drivers/mfd: remove obsolete irq_desc_t typedef mfd/pcf50633-gpio.c: add MODULE_LICENSE mfd: Mark WM8350 mask revision as readable to match silicon mfd: Mark clocks_init as non-init in twl4030-core.c mfd: Correct readability of WM8350 register 227
| * | | mfd: early init for MFD running regulatorsSamuel Ortiz2009-06-173-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For MFDs running regulator cores, we really want them to be brought up early during boot. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Rapoport <mike@compulab.co.il>
| * | | mfd: fix tmio related warningsSamuel Ortiz2009-06-173-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can not have .driver_data as const since platform_set_drvdata() doesnt take a const. The hclk mmc_data field can be const though. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | mfd: asic3: enable SD/SDIO cellPhilipp Zabel2009-06-171-1/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables the ASIC3's SD/SDIO MFD cell, supported by the tmio_mmc driver. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | mfd: asic3: enable DS1WM cellPhilipp Zabel2009-06-172-0/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables the ASIC3's DS1WM MFD cell, supported by the ds1wm driver. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | mfd: asic3: use resource_size macro instead of local variablePhilipp Zabel2009-06-171-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This should make the code a little bit easier to read. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | mfd: asic3: add clock handling for MFD cellsPhilipp Zabel2009-06-171-0/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since ASIC3 has to work on both PXA and S3C and since their struct clk implementations differ, we can't register out clocks with the clkdev mechanism (yet?). For now we have to keep clock handling internal to this driver and enable/disable the clocks via the mfd_cell->enable/disable functions. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | mfd: asic3: add asic3_set_register common operationPhilipp Zabel2009-06-171-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Used to configure single bits of the SDHWCTRL_SDCONF and EXTCF_RESET/SELECT registers needed for DS1WM, MMC/SDIO and PCMCIA functionality. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | mfd: Fix Kconfig help text for WM8350Mark Brown2009-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | More with the grammar. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | mfd: add PCAP driverDaniel Ribeiro2009-06-173-0/+514
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCAP Asic as present on EZX phones is a multi function device with voltage regulators, ADC, touch screen controller, RTC, USB transceiver, leds controller, and audio codec. It has two SPI ports, typically one is connected to the application processor and another to the baseband, this driver provides read/write functions to its registers, irq demultiplexer and ADC queueing/abstraction. This chip is used on a lot of Motorola phones, it was manufactured by TI as a custom product with the name PTWL93017, later this design evolved into the ATLAS PMIC from Freescale (MC13783). Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | mfd: add U300 AB3100 core supportLinus Walleij2009-06-173-1/+1007
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a core driver for the AB3100 mixed-signal circuit found in the ST-Ericsson U300 series platforms. This driver is a singleton proxy for all accesses to the AB3100 sub-drivers which will be merged on top of this one, RTC, regulators, battery and system power control, vibrator, LEDs, and an ALSA codec. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mike Rapoport <mike@compulab.co.il> Reviewed-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | drivers/mfd: remove obsolete irq_desc_t typedefThomas Gleixner2009-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have been kept around for migration reasons. After more than two years it's time to remove them finally. This patch cleans up one of the remaining users. When all such patches hit mainline we can remove the defines and typedefs finally. Impact: cleanup Convert the last remaining users and remove the typedef. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | mfd/pcf50633-gpio.c: add MODULE_LICENSEAdrian Bunk2009-06-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the missing MODULE_LICENSE("GPL"). Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | mfd: Mark WM8350 mask revision as readable to match siliconMark Brown2009-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | No impact unless someone has written additional kernel code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | mfd: Mark clocks_init as non-init in twl4030-core.cRakib Mullick2009-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: Fix section mismatch. clocks_init() has been called from twl4030_probe() which is a non-init function. Since probing can be done anytime so clocks_init will be called anytime too. So we mark clock_init() as non-init. LD drivers/mfd/built-in.o WARNING: drivers/mfd/built-in.o(.text+0x8dd9): Section mismatch in reference from the function twl4030_probe() to the function .init.text:clocks_init() The function twl4030_probe() references the function __init clocks_init(). This is often because twl4030_probe lacks a __init annotation or the annotation of clocks_init is wrong. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | mfd: Correct readability of WM8350 register 227Mark Brown2009-06-171-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | This includes the USB current limit status override which is used in the power management driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | | Merge branch 'fixes' of ↵Linus Torvalds2009-06-172-84/+45
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] cpumask: new cpumask operators for arch/x86/kernel/cpu/cpufreq/powernow-k8.c [CPUFREQ] cpumask: avoid playing with cpus_allowed in powernow-k8.c [CPUFREQ] cpumask: avoid cpumask games in arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c [CPUFREQ] cpumask: avoid playing with cpus_allowed in speedstep-ich.c [CPUFREQ] powernow-k8: get drv data for correct CPU [CPUFREQ] powernow-k8: read P-state from HW [CPUFREQ] reduce scope of ACPI_PSS_BIOS_BUG_MSG[] [CPUFREQ] Clean up convoluted code in arch/x86/kernel/tsc.c:time_cpufreq_notifier() [CPUFREQ] minor correction to cpu-freq documentation [CPUFREQ] powernow-k8.c: mess cleanup [CPUFREQ] Only set sampling_rate_max deprecated, sampling_rate_min is useful [CPUFREQ] powernow-k8: Set transition latency to 1 if ACPI tables export 0 [CPUFREQ] ondemand: Uncouple minimal sampling rate from HZ in NO_HZ case
| * | | [CPUFREQ] Only set sampling_rate_max deprecated, sampling_rate_min is usefulThomas Renninger2009-06-152-31/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the documentation accordingly. Cleanup and use printk_once. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com>
| * | | [CPUFREQ] ondemand: Uncouple minimal sampling rate from HZ in NO_HZ caseThomas Renninger2009-06-152-53/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch you have following minimal sampling rate restrictions: Kernel restrictions: If CONFIG_NO_HZ is set, the limit is 10ms fixed. If CONFIG_NO_HZ is not set or no_hz=off boot parameter is used, the limits depend on the CONFIG_HZ option: HZ=1000: min=20000us (20ms) HZ=250: min=80000us (80ms) HZ=100: min=200000us (200ms) HW restrictions: Do not sample/poll more often than HW latency * 100 exported by the low level cpufreq HW driver The higher value of above restrictions is the minimal sampling rate that can be set (and can be seen via ondemand/sampling_rate_min sysfs file) Default sampling rate still is HW latency * 1000, but this will now end up in lower values on latest (Intel and AMD) hardware as these can switch really fast and sampling rate mostly was limited to the 80ms or 200ms (depending on whether HZ=250 or HZ=1000 is used). Signed-off-by: Thomas Renninger <trenn@suse.de> Cc: Pallipadi Venkatesh <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2009-06-1733-495/+1481
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] aic79xx: make driver respect nvram for IU and QAS settings [SCSI] don't attach ULD to Dell Universal Xport [SCSI] lpfc 8.3.3 : Update driver version to 8.3.3 [SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypoint [SCSI] lpfc 8.3.3 : Fix a couple of spin_lock and memory issues and a crash [SCSI] lpfc 8.3.3 : FC/FCOE discovery fixes [SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differences [SCSI] qla2xxx: Resolve a performance issue in interrupt [SCSI] cnic, bnx2i: Fix build failure when CONFIG_PCI is not set. [SCSI] nsp_cs: time_out reaches -1 [SCSI] qla2xxx: fix printk format warnings [SCSI] ncr53c8xx: div reaches -1 [SCSI] compat: don't perform unneeded copy in sg_io code [SCSI] zfcp: Update FC pass-through support [SCSI] zfcp: Add FC pass-through support [SCSI] FC Pass Thru support
| * | | | [SCSI] aic79xx: make driver respect nvram for IU and QAS settingsJames Bottomley2009-06-152-11/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows the Adaptec firmware to pass on its values for Packetize and QAS. To do this, the settings max_iu and max_qas have been introduced into the SPI transport class and populated from the adaptec NVram tables. Domain validation in the SPI transport class will respect the max settings when configuring to the highest possible speed for testing. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | | [SCSI] don't attach ULD to Dell Universal XportJames Bottomley2009-06-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We already have blacklists for SGI, IBM and SUN versions of this; apparently there's a Dell version too. Reported-by: Thomas Witzel <witzel.thomas@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | | [SCSI] lpfc 8.3.3 : Update driver version to 8.3.3James Smart2009-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | | [SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypointJames Smart2009-06-151-193/+291
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch was originally submitted upstream on 4/21/2008: http://marc.info/?l=linux-scsi&m=120880973719266&w=2 Somewhere, it never get merged. The patch restructures the task mgmt routines, commonizing like behavior. Then the patch changes device reset to LUN resets, and adds a target reset handler. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | | [SCSI] lpfc 8.3.3 : Fix a couple of spin_lock and memory issues and a crashJames Smart2009-06-153-9/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contains the following changes: - Fixed error paths retaking a spin lock which they already hold - Added code to free memory in a couple of error paths - Added code to free RPI bit map while unloading driver - Added code to write zero to memory object allocated through dma_alloc_coherent - Fixed crash/hang with target or LUN resets Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | | [SCSI] lpfc 8.3.3 : FC/FCOE discovery fixesJames Smart2009-06-158-26/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contains the following changes: - Force vport to send LOGO to fabric controller when deleting vport - Fixed driver failing to register login when a PLOGI is received - Fixes for FIP discovery - Added stricter checks for FCF addressing mode - Added code to send only FLOGI, FDISC and LOGO to Fabric controller as FIP - Fixed handling of LOGO from Fabric port - Fixed consecutive link up events skipped link_down processing Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | | [SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differencesJames Smart2009-06-1510-219/+224
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contains the following changes - Set the CT field of FDISC to 3 - Fixed over allocation of SCSI buffers on SLI4 - Removed unused jump table entries - Increase LPFC_WQE_DEF_COUNT to 256 - Updated FDISC context to VPI - Fixed immediate SCSI command for LUN reset translation to WQE - Extended mailbox handling to allow MBX_POLL commands in between async MBQ commands - Fixed SID used for FDISC - Fix crash when accessing ctlregs from sysfs for SLI4 HBAs - Fix SLI4 firmware version not being saved or displayed correctly - Expand CQID field in WQE structure to 16 bits - Fix post header template mailbox command timing out - Removed FCoE PCI device ID 0x0705 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | | [SCSI] qla2xxx: Resolve a performance issue in interruptAnirban Chakraborty2009-06-151-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reverted back a change in qla*_intr_handler code that caused an increase in cpu cycles by allowing interrupts to occur while the instance hardware lock was being held. Fix by taking the lock in irqsave mode. Reported-and-tested-by: Douglas W. Styner <douglas.w.styner@intel.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | | [SCSI] cnic, bnx2i: Fix build failure when CONFIG_PCI is not set.Michael Chan2009-06-152-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CNIC and BNX2I must depend on PCI. Dependencies do not get propagated through select. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | | [SCSI] nsp_cs: time_out reaches -1Roel Kluin2009-06-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With a postfix decrement timeouts will reach -1 rather than 0, so the errors do not appear. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | | [SCSI] qla2xxx: fix printk format warningsRandy Dunlap2009-06-151-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix qla2xxx printk format warnings: drivers/scsi/qla2xxx/qla_sup.c:915: warning: long long unsigned int format, u64 arg (arg 5) drivers/scsi/qla2xxx/qla_sup.c:915: warning: long long unsigned int format, u64 arg (arg 6) drivers/scsi/qla2xxx/qla_sup.c:923: warning: long long unsigned int format, u64 arg (arg 5) drivers/scsi/qla2xxx/qla_sup.c:923: warning: long long unsigned int format, u64 arg (arg 6) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
OpenPOWER on IntegriCloud