summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* libata-add-irq_flags-to-struct-pata_platform_info-fixAndrew Morton2007-10-121-1/+1
| | | | | | | | | | | Remove unneeded, undesirable cast of void*. Cc: Jeff Garzik <jeff@garzik.org> Cc: Sonic Zhang <sonic.adi@gmail.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata_piix: disallow UDMA 133 on ICH5 & ICH7Christian Lamparter2007-10-121-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is another outstanding issue with ata_piix.c. Intel has never officially supported anything faster than PATA 100MB/s. But, the ata_piix.c driver "define" the ICH5 & ICH7 as UDMA6 (aka 133MB/s) capable. [ Well, no one has probably noticed it before, because there is bug in do_pata_set_dmamode... Just look at libata_atapiix_enable_real_udma133.patch and you'll see what wrong with it. ] Here are Intel's datasheets for the affected chipsets: ICH5 Datasheet: http://www.intel.com/design/chipsets/datashts/252516.htm (See note on page 183: "... the ICH5 supports reads at the maximum rate of 100MB/s.") ICH7 Datasheet: http://www.intel.com/design/chipsets/datashts/307013.htm (See first note on page 190: "... the ICH7 supports reads at the maximum rate of 100MB/s.") They are two different ways to deal with it: - Either - 1. replace all ich_pata_133 with ich_pata_100. (libata_atapiix_disable_udma6.diff - diff from 2.6.22 ) - Or - 2. keep all ich_pata_133 and fix the bug in "do_pata_set_dmamode". (libata_atapiix_enable_real_udma133.patch - diff from 2.6.22) If there are any concerns about the safety of the patch patch: http://lkml.org/lkml/2007/7/6/292 (It was already tested by an Intel employee, but I guess a bit more user input is necessary here... ) This patch implements 1. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ahci: Store interrupt valueKristen Carlson Accardi2007-10-121-1/+10
| | | | | | | | | Use a stored value for which interrupts to enable. Changing this allows us to selectively turn off certain interrupts later and have them stay off. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] ahci: send event when AN receivedKristen Carlson Accardi2007-10-122-0/+42
| | | | | | | | | When we get an SDB FIS with the 'N' bit set, we should send an event to user space to indicate that there has been a media change. This will be done via the scsi device. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] check for SATA async notify supportKristen Carlson Accardi2007-10-121-0/+53
| | | | | | | | Check to see if an ATAPI device supports Asynchronous Notification. If so, enable it, if the host controller supports AN. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_cmd64x: Set up MWDMA modes properlyAlan Cox2007-10-121-11/+26
| | | | | | | | | | Set the MWDMA timing by updating the correct registers. Split the PIO path as this is mostly shared code. Wants testing. Signed-off-by: Alan Cox <alan@redhat.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: Note that our cache flush code needs fixing upAlan Cox2007-10-121-0/+4
| | | | | | | Remembered this while doing auditing and code review versus the specs Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-core: Document some limits/assumptions about ID_ATAAlan Cox2007-10-121-2/+8
| | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: add support for ATA_16 on ATAPIMark Lord2007-10-123-16/+41
| | | | | | | | | | | | | | Add support for issuing ATA_16 passthru commands to ATAPI devices managed by libata. It requires the previous CDB length fix patch. A boot/module parameter, "atapi_passthru16=0" can be used to globally disable this feature, if ever desired. tj: restructured __ata_scsi_queuecmd() according to Jeff's suggestion. Signed-off-by: Mark Lord <liml@rtr.ca> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: move ata_altstatus() to pio data xfer functionsAlbert Lee2007-10-121-4/+3
| | | | | | | | | Move ata_altstatus() out from ata_hsm_move() to the pio data xfer functions like ata_pio_sectors() and atapi_pio_bytes() where it makes more sense. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: Correct IORDY handlingAlan Cox2007-10-121-1/+5
| | | | | | | | | | | | | | | | Debugging a report of a problem with an ancient solid state disk showed up some problems in the IORDY handling 1. We check the wrong bit to see if the device has IORDY 2. Even then some ancient creaking piles of crap don't support SETXFER at all. The cases it fixes are obscure and the risk of side effects is slight but possible. This also moves us slightly closer to supporting original MFM/RLL disks with libata. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: update Power Management to handle PMP linksTejun Heo2007-10-121-2/+5
| | | | | | | Update Power Management to consider PMP links. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: update hotplug to handle PMP linksTejun Heo2007-10-122-52/+114
| | | | | | | | | | Update hotplug to handle PMP links. When PMP is attached, the PMP number corresponds to C of SCSI H:C:I:L. While at it, change argument to ata_find_dev() to @devno from @id to avoid confusion with SCSI device ID. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: update EH to deal with PMP linksTejun Heo2007-10-121-70/+158
| | | | | | | | | | | | | | | | | | | | | | | Update ata_eh_autopsy(), ata_eh_report(), ata_eh_revalidate_and_attach() and ata_eh_recover() to deal with PMP links. ata_eh_autopsy() and ata_eh_report() updates are straightforward. They just repeat the same operation over all configured links. The only change to ata_eh_revalidate_and_attach() is avoiding calling ->cable_select() on non-host ports. ata_eh_recover() update is more complex as it first processes all resets and then performs the rest. This is necessary as thawing with some links in unknown state can be dangerous. ehi->action is cleared on successful recovery of a link to avoid repeating recovery due to failures in other links. ata_eh_recover() iterates over only PMP links if PMP is attached, and, on failure, the failing link is returned in @failed_link instead of disabling devices directly. These are to integrate ata_eh_recover() into PMP EH later. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: update ata_scsi_error() to handle PMP linksTejun Heo2007-10-121-4/+9
| | | | | | | | Update ata_scsi_error() to handle PMP links. As error conditions can occur on both host and PMP links, __ata_port_for_each_link() is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: add PMP linksTejun Heo2007-10-121-2/+4
| | | | | | | | | | | | | | | | | | Add link->pmp, ap->nr_pmp_links, ap->pmp_link[], and implement/update link helpers. printk helpers are updated such that port and link are identifed as 'ataP:' if no PMP is attached, while device is identified as 'ataP.DD:'. If PMP is attached, they become 'ataP:', 'ataP.LL:' and 'ataP.LL' - ie. link and device are identified their PMP number. If PPM is attached (ap->nr_pmp_links != 0), ata_for_each_link() iterates over PMP links, while __ata_for_each_link() iterates over the host link + PMP links. If PMP is not attached (ap->nr_pmp_links == 0), both iterate over only the host link. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: implement ata_link_abort()Tejun Heo2007-10-122-14/+37
| | | | | | | Implement ata_link_abort(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: separate out link initialization functionsTejun Heo2007-10-121-20/+64
| | | | | | | | Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flagsTejun Heo2007-10-125-18/+31
| | | | | | | | | | HRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to ata_link->flags. This will allow host and PMP links to have different attributes. ata_port_info->link_flags is added and used by LLDs to specify these flags during initialization. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: linkify config/EH related functionsTejun Heo2007-10-1214-109/+120
| | | | | | | | | | | | | Make the following functions deal with ata_link instead of ata_port. * ata_set_mode() * ata_eh_autopsy() and related functions * ata_eh_report() and related functions * suspend/resume related functions * ata_eh_recover() and related functions Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: linkify resetTejun Heo2007-10-1230-162/+193
| | | | | | | | | | | | | | Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: linkify EH action helpersTejun Heo2007-10-121-17/+18
| | | | | | | | | | Make ata_eh_about_to_do() and ata_eh_done() deal with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: linkify PHY-related functionsTejun Heo2007-10-1210-149/+165
| | | | | | | | | | | | | | | | | Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: implement and use link/device iteratorsTejun Heo2007-10-1212-145/+120
| | | | | | | | | | | | | | | | | Multiple links and different number of devices per link should be considered to iterate over links and devices. This patch implements and uses link and device iterators - ata_port_for_each_link() and ata_link_for_each_dev() - and ata_link_max_devices(). This change makes a lot of functions iterate over only possible devices instead of from dev 0 to dev ATA_MAX_DEVICES. All such changes have been examined and nothing should be broken. While at it, add a separating comment before device helpers to distinguish them better from link helpers and others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: introduce ata_linkTejun Heo2007-10-1232-240/+255
| | | | | | | | | | | | | | | | | | | Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] pdc_adma: convert to new exception handling (EH) frameworkJeff Garzik2007-10-121-15/+67
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [TG3]: Fix APE induced regressionMatt Carlson2007-10-111-3/+4
| | | | | | | | This patch fixes a bug caused by the recent APE support added for 5761 devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SKY2]: version 1.19Stephen Hemminger2007-10-111-1/+1
| | | | | | | Update version to keep track of new changes. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SKY2]: use netdevice stats structStephen Hemminger2007-10-112-22/+13
| | | | | | | Use builtin statistics structure from net device. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SKY2]: fiber advertise bits initialization (trivial)Stephen Hemminger2007-10-111-2/+2
| | | | | | | Put initialization in sequential order (same as other constants). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SKY2]: fix power settings on Yukon XLStephen Hemminger2007-10-111-7/+6
| | | | | | | Make sure PCI register for PHY power gets set correctly. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SKY2]: ethtool register reserved area blackoutStephen Hemminger2007-10-111-9/+53
| | | | | | | | | | | | | Make sure and not dump reserved areas of device space. Touching some of these causes machine check exceptions on boards like D-Link DGE-550SX. Coding note, used a complex switch statement rather than bitmap because it is easier to relate the block values to the documentation rather than looking at a encoded bitmask. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵Linus Torvalds2007-10-1131-883/+1449
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
| * [POWERPC] XilinxFB: Allow fixed framebuffer base addressGrant Likely2007-10-121-6/+16
| | | | | | | | | | | | | | | | Allow a fixed framebuffer address to be assigned to the framebuffer device instead of allocating the framebuffer from the consistent memory pool. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] XilinxFB: Add support for custom screen resolutionGrant Likely2007-10-121-26/+45
| | | | | | | | | | | | | | | | | | Some custom implementations of the xilinx fb can use resolutions other than 640x480. This patch allows the resolution to be specified in the device tree or the xilinx_platform_data structure. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] XilinxFB: Use pdata to pass around framebuffer parametersGrant Likely2007-10-121-20/+23
| | | | | | | | | | | | | | | | | | | | The call to xilinxfb_assign is getting unwieldy when adding features to the Xilinx framebuffer driver. Change xilinxfb_assign() to accept a pointer to a xilinxfb_platform_data structure to prepare for adding additition configuration options. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * Merge branch 'virtex-for-2.6.24' of ↵Josh Boyer2007-10-111-80/+199
| |\ | | | | | | | | | git://git.secretlab.ca/git/linux-2.6-virtex into for-2.6.24-4xx
| | * [POWERPC] XilinxFB: sparse fixesGrant Likely2007-10-101-3/+3
| | | | | | | | | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| | * [POWERPC] XilinxFB: Make missing pdata structure non-fatalGrant Likely2007-10-091-12/+10
| | | | | | | | | | | | | | | | | | | | | Missing pdata structure is not a fatal error. The device can still be initialized without it. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| | * [POWERPC] XilinxFB: add of_platform bus bindingGrant Likely2007-10-091-9/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the of_platform bus binding to the xilinxfb driver. Needed to use framebuffer devices described in the OF device tree (used by arch/powerpc). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andrei Konovalov <akonovalov@ru.mvista.com>
| | * [POWERPC] XilinxFB: cleanup platform_bus binding to use platform bus API.Grant Likely2007-10-091-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | Change the platform bus binding to make use of the established platform_bus API. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andrei Konovalov <akonovalov@ru.mvista.com>
| | * [POWERPC] XilinxFB: Split device setup from bus bindingGrant Likely2007-10-091-53/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | Split the device setup code away from the platform bus binding. This is in preparation for adding the of_platform bus binding to this driver and most of the setup code is common between the two busses. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andrei Konovalov <akonovalov@ru.mvista.com>
| | * [POWERPC] XilinxFB: rename failout labels to reflect failureGrant Likely2007-10-091-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Labels and gotos are used in xilinxfb_assign to unwind allocations on device registration failures. Rename the labels to reflect the error which occured. This change is being made to make it easier to add new failout paths (which occurs in a subsuquent patch) and to make reviewing the failout path easier. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andrei Konovalov <akonovalov@ru.mvista.com>
| | * [POWERPC] XilinxFB: Replace calls to printk with dev_dbg, dev_err, etc.Grant Likely2007-10-091-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | The dev_dbg, dev_err, etc functions provide more context that plain vanilla printk which is useful for debugging. Where appropriate, change printk calls to the appropriate dev_*() call. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andrei Konovalov <akonovalov@ru.mvista.com>
| | * [POWERPC] XilinxFB: add banner output to probe routine when DEBUG is definedGrant Likely2007-10-091-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Debug support: when DEBUG is defined, output relevant details to the log about the framebuffer registration. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andrei Konovalov <akonovalov@ru.mvista.com>
| * | [POWERPC] iSeries: Move viodasd probingStephen Rothwell2007-10-111-52/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This way we only have entries in the device tree for disks that actually exist. A slight complication is that disks may be attached to LPARs at runtime. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] iSeries: Move detection of virtual tapesStephen Rothwell2007-10-111-106/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now we will only have entries in the device tree for the actual existing devices (including their OS/400 properties). This way viotape.c gets all the information about the devices from the device tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] iSeries: Move detection of virtual cdromsStephen Rothwell2007-10-111-97/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now we will only have entries in the device tree for the actual existing devices (including their OS/400 properties). This way viocd.c gets all the information about the devices from the device tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Remove iSeries_vio_devStephen Rothwell2007-10-112-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was only being used to carry around dma_iommu_ops and vio_iommu_table which we can use directly instead. This also means that vio_bus_device doesn't need to refer to them either. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] iSeries: Simplify viocd initialisationStephen Rothwell2007-10-111-24/+13
| |/ | | | | | | | | | | | | | | | | We don't need to keep a lump of dma coherent memory around for the life of the module. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud