summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* ide: move ide_config_drive_speed() calls to upper layers (take 2)Bartlomiej Zolnierkiewicz2007-10-1335-516/+292
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16. * Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program the host for the transfer mode after programming the device. Set it in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac and via82cxxx host drivers. * Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely skip programming of host/device for the transfer mode ("smart" hosts). Set it in it821x host driver and check it in ide_tune_dma(). * Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all direct ->set_pio_mode/->speedproc users to use these helpers. * Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc methods to callers. * Rename ->speedproc method to ->set_dma_mode, make it void and update all implementations accordingly. * Update ide_set_xfer_rate() comments. * Unexport ide_config_drive_speed(). v2: * Fix issues noticed by Sergei: - export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt to setting DMA modes from sc1200_set_pio_mode() to do_special() - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma() - check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode() - check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode() - return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL - don't set ->set_{pio,dma}_mode on it821x in "smart" mode - fix build problem in pmac.c - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c - improve patch description Changes in behavior caused by this patch: - HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change PIO mode if it821x controller is in "smart" mode - removal of two debugging printk-s (from cs5530.c and sc1200.c) - transfer modes 0x00-0x07 passed from user space may be programmed twice on the device (not really an issue since 0x00 is not supported correctly by any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* pdc202xx_new: check ide_config_drive_speed() return valueBartlomiej Zolnierkiewicz2007-10-131-3/+3
| | | | | Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* cs5535: check ide_config_drive_speed() return valueBartlomiej Zolnierkiewicz2007-10-131-2/+6
| | | | | Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* amd74xx/via82cxxx: check ide_config_drive_speed() return valueBartlomiej Zolnierkiewicz2007-10-132-14/+6
| | | | | | | | | | | | | | * Check ide_config_drive_speed() return value. * While at also call ide_config_drive_speed() if the transfer mode is XFER_PIO_SLOW (this case happens iff the transfer mode has already been set on the device by ide-proc.c::set_xfer_rate()) and remove redundant setting of ->{init,current}_speed. * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* au1xxx: fix au1xxx_set_pio_mode()Bartlomiej Zolnierkiewicz2007-10-131-4/+3
| | | | | | | | Set transfer mode on the device before programming the host controller for the new timings (matches what auide_tune_chipset() is doing wrt DMA modes). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* icside: use ide_tune_dma()Bartlomiej Zolnierkiewicz2007-10-132-43/+17
| | | | | | | | | | | | | | | | | * Add "good DMA drives" hack for icside to ide-dma.c::ide_find_dma_mode() (in the long-term it should be either removed or generalized for all hosts). * Use ide_tune_dma() in icside.c::icside_dma_check(). This results in the following changes in behavior: - pre-EIDE SWDMA modes are now also respected - drive->autodma is checked instead of hwif->autodma (doesn't really matter as icside sets both to "1") * Make ide-dma.c::__ide_dma_good_drive() static and drop "__" prefix. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: fix PIO setup and enable autotuneBenjamin Herrenschmidt2007-10-131-8/+12
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: use ide_tune_dma() (take 2)Bartlomiej Zolnierkiewicz2007-10-131-18/+7
| | | | | | | | | | | | | | | | | | | | | | | | * Add missing initialization of hwif->autodma and drive->autodma to pmac_ide_setup_dma(). * Use ide_tune_dma() in pmac_ide_dma_check(). While at it: * Fix pmac_ide_dma_check() return value if DMA mode is not programmed (should be "-1" otherwise ide_set_dma() will try to enable DMA). * Remove unnecessary drive->using_dma fiddling (->dma_off_quietly is always called before ide_set_dma() call and ide_set_dma() calls ->ide_dma_on if ->ide_dma_check returns "0"). v2: * No reason to blacklist all ide_floppy devices and the old code was always enabling DMA anyway (without even programming controller/device if the device was ide_floppy). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: remove pmac_ide_do_setfeature() (take 2)Bartlomiej Zolnierkiewicz2007-10-133-79/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use ide_config_drive_speed() instead of pmac_ide_do_setfeature() and remove the latter, also ide-iops.c::__ide_wait_stat() could be static again. Since for IDE PMAC host driver IDE_CONTROL_REG is always true, device's ->quirk_list is always zero and ->ide_dma_host_{on,off} are nops than the only changes in behavior are: * if PIO mode is set then ->dma_off_queitly is called to disable DMA * if setting transfer mode fails ide_dump_status() is called to dump status v2: * IDE PMAC controllers allow separate PIO and DMA timings and PPC userland depends on this fact, and calls "hdparm -p" without calling "hdparm -d". Therefore to compensate for DMA being disabled by ide_config_drive_speed() for PIO modes: - add IDE_HFLAG_SET_PIO_MODE_KEEP_DMA flag and set it in PMAC host driver - add handling of the new flag to ide-io.c::do_special() Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature()Bartlomiej Zolnierkiewicz2007-10-131-1/+0
| | | | | | | | | Upper layers are responsible for controlling nIEN so don't clear nIEN after command execution in pmac_ide_do_setfeature(). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: use __ide_wait_stat()Bartlomiej Zolnierkiewicz2007-10-132-34/+6
| | | | | | | | | | | | | | | | * Use __ide_wait_stat() instead of wait_for_ready() in pmac_ide_do_setfeature(). While at it do following changes to match __ide_wait_stat() call in ide_config_drive_speed(): * Wait WAIT_CMD time (20 sec) instead of 2 sec for device to clear BUSY_STAT. * Check DRQ_STAT bit (shouldn't be set for good device status). Also remove no longer needed wait_for_ready() from ide-iops.c. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: remove extra good status wait from pmac_ide_do_setfeature()Bartlomiej Zolnierkiewicz2007-10-131-11/+1
| | | | | | | | | | | Don't check for good device status before executing the command in pmac_ide_do_setfeature() (ide_config_drive_speed() doesn't do this). It is a job of upper layers to guarantee that the device is ready to accept new command before we get here. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add __ide_wait_stat() helperBartlomiej Zolnierkiewicz2007-10-131-52/+44
| | | | | | | | | | | | | | | | | | | * Split off checking of the status register from ide_wait_stat() to __ide_wait_stat() helper. * Use the new helper in ide_config_drive_speed(). The only change in the functionality is that the function now fails if after 20 sec (WAIT_CMD) device is still busy (BUSY_STAT bit is set) while previously instead of failing the function continued with checking for the correct device status (which would give the device additional 10 usec to clear BUSY_STAT bit). * Remove stale comment for ide_config_drive_speed(). * Remove duplicate comment for ide_wait_stat() from <linux/ide.h>. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: remove pmac_ide_{m,u}dma_enable() (take 2)Bartlomiej Zolnierkiewicz2007-10-131-98/+4
| | | | | | | | | | | | | | | | | * Fix pmac_ide_dma_check() to use pmac_ide_tune_chipset() and remove no longer necessary pmac_ide_{m,u}dma_enable(). * While at it remove some dead code from pmac_ide_dma_check() (leftovers from conversion to use ide_max_dma_mode()). There should be no functionality changes caused by this patch. v2: * Fix compile by replacing "id" with "drive->id" in pmac_ide_dma_check() (Noticed by Ben). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: remove control register messing from pmac_ide_dma_check()Bartlomiej Zolnierkiewicz2007-10-131-1/+1
| | | | | | | | pmac_ide_do_setfeature() contains matching nIEN setting/clearing so this Device Control register messing in pmac_ide_dma_check() is totally unnecessary. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: fix set_timings_mdma()Bartlomiej Zolnierkiewicz2007-10-131-28/+12
| | | | | | | | | | | | | | | | | | * Move adjusting of cycle time for devices providing explicit DMA cycle time from pmac_ide_mdma_enable() to set_timings_mdma(). * Remove no longer needed drive_cycle_time argument. * BUG() if unsupported speed argument value is passed (shouldn't happen). * Matching access/recovery timings always exist so remove redundant check. * Make set_timings_mdma() void. * Update pmac_ide_tune_chipset()'s comment. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: pmac_ide_tune_chipset() fixesBartlomiej Zolnierkiewicz2007-10-131-11/+16
| | | | | | | | | | | | | * Don't check check for pmif == NULL (it should never be NULL if we got here). * Make a local copy of the timings and set the pmif->timings[] only after setting the transfer mode on the device (otherwise SELECT_DRIVE() call in pmac_ide_do_setfeature() will program new timings before the transfer mode is set on the device - this was pointed out by Sergei). This change makes pmac_ide_tune_chipset() behavior match this of pmac_ide_{m,u}dma_enable(). Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: don't check kauai_lookup_timing() return valueBartlomiej Zolnierkiewicz2007-10-131-12/+1
| | | | | | | | | | | | kauai_lookup_timing() should always return non-zero return value: * BUG() in kauai_lookup_timing() if the timing info cannot be found. * Remove code checking for zero return value from all callers. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: unexport ide_acpi_set_stateAdrian Bunk2007-10-131-1/+0
| | | | | | | | | | This patch removes the unused EXPORT_SYMBOL_GPL(ide_acpi_set_state) Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide_platform: set hwif->chipsetBartlomiej Zolnierkiewicz2007-10-131-1/+1
| | | | | | | We need to set hwif->chipset or IDE PCI host drivers may try to claim our ide_hwifs[] slot. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Merge branch 'upstream' of ↵Linus Torvalds2007-10-1278-1957/+7524
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (119 commits) [libata] struct pci_dev related cleanups libata: use ata_exec_internal() for PMP register access libata: implement ATA_PFLAG_RESETTING libata: add @timeout to ata_exec_internal[_sg]() ahci: fix notification handling ahci: clean up PORT_IRQ_BAD_PMP enabling ahci: kill leftover from enabling NCQ over PMP libata: wrap schedule_timeout_uninterruptible() in loop libata: skip suppress reporting if ATA_EHI_QUIET libata: clear ehi description after initial host report pata_jmicron: match vendor and class code only libata: add ST9160821AS / 3.ALD to NCQ blacklist pata_acpi: ACPI driver support libata-core: Expose gtm methods for driver use libata: add HDT722516DLA380 to NCQ blacklist libata: blacklist NCQ on Seagate Barracuda ST380817AS [libata] Turn on ACPI by default libata_scsi: Fix ATAPI transfer lengths libata: correct handling of SRST reset sequences libata: Integrate ACPI-based PATA/SATA hotplug - version 5 ...
| * [libata] struct pci_dev related cleanupsJeff Garzik2007-10-123-20/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * remove pointless pci_dev_to_dev() wrapper. Just directly reference the embedded struct device like everyone else does. * pata_cs5520: delete cs5520_remove_one(), it was a duplicate of ata_pci_remove_one() * linux/libata.h: don't bother including linux/pci.h, we don't need it. Simply declare 'struct pci_dev' and assume interested parties will include the header, as they should be doing anyway. * linux/libata.h: consolidate all CONFIG_PCI declarations into a single location in the header. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * libata: use ata_exec_internal() for PMP register accessTejun Heo2007-10-125-189/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PMP registers used to be accessed with dedicated accessors ->pmp_read and ->pmp_write. During reset, those callbacks are called with the port frozen so they should be able to run without depending on interrupt delivery. To achieve this, they were implemented polling. However, as resetting the host port makes the PMP to isolate fan-out ports until SError.X is cleared, resetting fan-out ports while port is frozen doesn't buy much additional safety. This patch updates libata PMP support such that PMP registers are accessed using regular ata_exec_internal() mechanism and kills ->pmp_read/write() callbacks. The following changes are made. * PMP access helpers - sata_pmp_read_init_tf(), sata_pmp_read_val(), sata_pmp_write_init_tf() are folded into sata_pmp_read/write() which are now standalone PMP register access functions. * sata_pmp_read/write() returns err_mask instead of rc. This is consistent with other functions which issue internal commands and allows more detailed error reporting. * ahci interrupt handler is modified to ignore BAD_PMP and spurious/illegal completion IRQs while reset is in progress. These conditions are expected during reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: implement ATA_PFLAG_RESETTINGTejun Heo2007-10-121-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | Implement ATA_PFLAG_RESETTING. This flag is set while reset is in progress. It's set before prereset is called and cleared after reset fails or postreset is finished. This flag itself doesn't have any function. It will be used by LLDs to tell whether reset is in progress if it needs to behave differently during reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: add @timeout to ata_exec_internal[_sg]()Tejun Heo2007-10-124-17/+26
| | | | | | | | | | | | | | | | Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * ahci: fix notification handlingTejun Heo2007-10-121-9/+21
| | | | | | | | | | | | | | | | | | | | | | | | Asynchronous notification on ICH9 didn't work because it didn't write AN FIS into the RX area - it only updates SNotification. Also, snooping SDB_FIS RX area is racy against further SDB FIS receptions. Let sata_async_notification() determine using SNTF if it's available and snoop RX area iff SNTF isn't available Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * ahci: clean up PORT_IRQ_BAD_PMP enablingTejun Heo2007-10-121-5/+10
| | | | | | | | | | | | | | | | Now that we have pp->intr_mask, move PORT_IRQ_BAD_PMP enabling to ahci_pmp_attach/detach() where it belongs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * ahci: kill leftover from enabling NCQ over PMPTejun Heo2007-10-121-8/+0
| | | | | | | | | | | | | | | | | | ahci had problems with NCQ over PMP and NCQ used to be disabled while PMP was attached. After fixing the problem, the temporary NCQ disabling code wasn't removed completely. Kill the remaining piece. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: wrap schedule_timeout_uninterruptible() in loopTejun Heo2007-10-121-1/+2
| | | | | | | | | | | | | | | | | | | | Tasks in uninterruptible sleep might be woken up by unrelated events and should check whether the condition it was waiting for has actually triggered. Wrap schedule_timeout_uninterruptible() in loop to achieve it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: skip suppress reporting if ATA_EHI_QUIETTejun Heo2007-10-121-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ATA_EHI_NO_AUTOPSY and ATA_EHI_QUIET are used during initial probing to skip exception analysis and reporting. Usually, there's nothing to report but on some allowed but rare corner cases (e.g. phy status changed interrupt when IRQ is enabled on frozen port - this happens if IRQ pending status isn't cleared in the IRQ router or controller) exception messages get printed. Skip reporting if ATA_EHI_QUIET is set. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: clear ehi description after initial host reportTejun Heo2007-10-121-2/+3
| | | | | | | | | | | | | | | | | | | | ehi description field is used to carry LLD specific controller description. Sometimes, it's used without clearing before and LLD description gets printed with exception information one more time. Clear after printing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * pata_jmicron: match vendor and class code onlyTejun Heo2007-10-121-11/+2
| | | | | | | | | | | | | | | | | | | | | | PATA part of all current JMB controllers behave the same way and JMicron confirms that all future ones will stay compatible. Drop device matching and match only vendor and class. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Ethan Hsiao <ethanhsiao@jmicron.com> Cc: Justin Tsai <justin@jmicron.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: add ST9160821AS / 3.ALD to NCQ blacklistTejun Heo2007-10-121-0/+1
| | | | | | | | | | | | | | ST9160821AS / 3.ALD also does spurious NCQ completions. Disable NCQ. Signed-off-by: Tejun Heo <teheo@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * pata_acpi: ACPI driver supportAlan Cox2007-10-123-0/+406
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a cable there may be eighty wires or perhaps forty and we learn about its type In the world of ACPI So we call the GTM And we find the the timing rate And we look through it to see If eighty wire it must be Timing lives in ACPI routines ACPI routines, ACPI routines Timing lives in ACPI routines ACPI routes ACPI routines And the drivers last you see Picking up unknown pci ids and the code begins to work Timing lives in ACPI routines ACPI routines, ACPI routines Timing lives in ACPI routines ACPI routes ACPI routines [Full speed ahead, Mr Hacker, full speed ahead] Full speed over here sir! Checking Cable, checking cable Aye aye, 80 wire, Heaven heaven] If we use ACPI (ACPI) Every box (every box) has all we need (has all we need) Cable type (cable type) and mode timing (mode timing) In our ATA (in our ATA) subroutines (subroutines, ha ha) Timing lives in ACPI routines ACPI routines, ACPI routines Timing lives in ACPI routines ACPI routes ACPI routines Timing lives in ACPI routines ACPI routines, ACPI routines Timing lives in ACPI routines ACPI routes ACPI routines Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata-core: Expose gtm methods for driver useAlan Cox2007-10-121-2/+6
| | | | | | | | | | | | | | | | | | | | | | Talk to the dark side our driver has to, yes. Much misleading is the data. Store it in a structure we do so that it may be parsed. Signed-off-by: Alan Cox <alan@redhat.com> -- Whats small, old and shouts phrases out of order across mountains ? Yodla.. Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: add HDT722516DLA380 to NCQ blacklistTejun Heo2007-10-121-0/+1
| | | | | | | | | | | | | | | | | | HDT722516DLA380 does spurious completion of NCQ commands. Blacklist it. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Frans Pop <elendil@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: blacklist NCQ on Seagate Barracuda ST380817ASPaolo Ornati2007-10-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Seagate Barracuda ST380817AS has troubles with NCQ. For example, unpacking a tarball on an XFS filesystem gives this: ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen ata1.00: cmd 61/40:00:29:a3:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 32768 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) More info here: http://lkml.org/lkml/2007/1/21/76 Blacklist it! Signed-off-by: Paolo Ornati <ornati@fastwebnet.it> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [libata] Turn on ACPI by defaultJeff Garzik2007-10-121-2/+2
| | | | | | | | | | | | Let's see what explodes. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * libata_scsi: Fix ATAPI transfer lengthsAlan Cox2007-10-121-4/+14
| | | | | | | | | | | | | | | | | | | | Some controller variants snoop the ATAPI length value for Packet transfers to do state machine and FIFO management. Thus we want to set it properly, even for cases where it is otherwise meaningless. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: correct handling of SRST reset sequencesAlan Cox2007-10-121-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct handling of SRST reset sequences. After an SRST it is undefined whether the drive has gone back to PIO0. In order to talk safely we should talk slowly and carefully until we know. Thus when we do the reset if the controller has a pio setup method we call it to flip back to PIO 0 and a known state. After the reset completes the identify will then be done at the safe speed and the drive/controller will pick suitable faster modes and reconfigure the controller to these timings. As a side effect it means we force the controller to PIO 0 as we bring it up which fixes funnies on a few systems where the BIOS firmware leaves us in an interesting choice of modes, or embedded boxes with no firmware which come up in random states. For smart controllers there is nothing to do - they know about this internally. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: Integrate ACPI-based PATA/SATA hotplug - version 5Matthew Garrett2007-10-121-1/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Modern laptops with hotswap bays still tend to utilise a PATA interface on a SATA bridge, generally with the host controller in some legacy emulation mode rather than AHCI. This means that the existing hotplug code in libata is unable to work. The ACPI specification states that these devices can send notifications when hotswapped, which avoids the need to obtain notification from the controller. This patch uses the existing libata-acpi code and simply registers a notification in order to trigger a rescan whenever the firmware signals an event. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: Add a drivers/ide style DMA disableAlan Cox2007-10-121-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is useful when debugging, handling problem systems, or for distributions just to get the system installed so it can be sorted out later. This is a bit smarter than the old IDE one and lets you do libata.dma=0 Disable all PATA DMA like old IDE libata.dma=1 Disk DMA only libata.dma=2 ATAPI DMA only libata.dma=4 CF DMA only (or combinations thereof - 0,1,3 being the useful ones I suspect) (I've split CF as it seems to be a seperate case of pain and suffering different to the others and caused by assorted PIO wired adapters etc) Signed-off-by: Alan Cox <alan@redhat.com> [edited to work on SATA too, changing name from 'pata_dma' to 'dma'] Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * ahci: Add MCP79 support to AHCI driverPeer Chen2007-10-121-0/+8
| | | | | | | | | | Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: add human-readable error value decodingRobert Hancock2007-10-121-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds human-readable decoding of the ATA status and error registers (similar to what drivers/ide does) as well as the SATA Serror register to libata error handling output. This prevents the need to pore through standards documents to figure out the meaning of the bits in these registers when looking at error reports. Some bits that drivers/ide decoded are not decoded here, since the bits are either command-dependent or obsolete, and properly parsing them would add too much complexity. Signed-off-by: Robert Hancock <hancockr@shaw.ca> [edited slightly to make output a bit more symmetric] Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * ahci: implement AHCI_HFLAG_NO_PMPTejun Heo2007-10-121-2/+9
| | | | | | | | | | | | | | Of course some controllers lie about PMP support. Black list them. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * ahci: move host flags over to pi.private_dataTejun Heo2007-10-121-28/+35
| | | | | | | | | | | | | | | | | | Private pi.flags area is full and we need more private flags. Move host private flags over to pi.private_data. During initialization, these flags are copied to hpriv->flags. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * ahci: implement PMP supportTejun Heo2007-10-121-46/+174
| | | | | | | | | | | | | | | | | | | | | | | | Implement AHCI PMP support. ahci only supports command based switching. Also, for some reason, NCQ over PMP doesn't work now. Other than that, everything works. Tested on ICH9R, JMB360/363 + SIMG3726, 4726 and 5744. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Forrest Zhao <forrest.zhao@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * sata_sil24: implement PORT_RSTTejun Heo2007-10-121-23/+70
| | | | | | | | | | | | | | | | | | As DEV_RST (hardreset) sometimes fail to recover the controller (especially after PMP DMA CS errata). In such cases, perform PORT_RST prior to DEV_RST. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * sata_sil24: implement PMP supportTejun Heo2007-10-121-21/+206
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement PMP support. sil24 supports full FIS-switching. However, it has a PMP DMA CS errata which requires port-wide resetting if commands are outstanding to three or more devices when an error occurs on one of them. ATAPI commands often result in CHECK SENSE and it's crucial to not reset them before fetching sense data. Unfortunately, ATAPI CHECK SENSE causes a lot of problem if command is outstanding to any other device usually resulting in port-wide reset. So, sata_sil24 implements sil24_qc_defer() which guarantees ATAPI command is run by itself. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata-pmp: implement qc_defer for command switching PMP supportTejun Heo2007-10-122-0/+31
| | | | | | | | | | | | | | | | Implement sata_pmp_qc_defer_cmd_switch() - standard qc_defer for command switching PMP support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
OpenPOWER on IntegriCloud