summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* DS1WM: decouple host IRQ and INTR active state settingsPhilipp Zabel2008-02-071-4/+5
| | | | | | | | | | | | | The DS1WM driver incorrectly infers the IAS bit (1-wire interrupt active high) from IRQ settings. There are devices that have IAS=0 but still need the IRQ to trigger on a rising edge. With this patch, machines with DS1WM that need IAS=1 have to set .active_high=1 in the ds1wm_platform_data. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Acked-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* power_supply: remove capacity_level from list of sysfs attributesThadeu Lima de Souza Cascardo2008-02-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | This commit: commit 8efe444038a205e79b38b7ad03878824901849a8 Author: Andres Salomon <dilinger@queued.net> Date: Wed Dec 12 14:12:56 2007 -0500 power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL Removed CAPACITY_LEVEL from every other code, leaving the array with sysfs attributes with one more entry than the number of enums in power_supply.h. This leads to some attributes containing the value of the attribute right after it. For example, temp_ambient would have the value of time_to_empty_now. In my case, I had time_to_full_avg have the value which should be in model_name, when the former was usually empty. Cc: Andres Salomon <dilinger@debian.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'async-tx-for-linus' of ↵Linus Torvalds2008-02-064-135/+96
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://lost.foo-projects.org/~dwillia2/git/iop into fix * 'async-tx-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop: async_tx: allow architecture specific async_tx_find_channel implementations async_tx: replace 'int_en' with operation preparation flags async_tx: kill tx_set_src and tx_set_dest methods async_tx: kill ASYNC_TX_ASSUME_COHERENT iop-adma: use LIST_HEAD instead of LIST_HEAD_INIT async_tx: use LIST_HEAD instead of LIST_HEAD_INIT async_tx: fix compile breakage, mark do_async_xor __always_inline
| * async_tx: replace 'int_en' with operation preparation flagsDan Williams2008-02-062-12/+12
| | | | | | | | | | | | | | | | | | | | | | Pass a full set of flags to drivers' per-operation 'prep' routines. Currently the only flag passed is DMA_PREP_INTERRUPT. The expectation is that arch-specific async_tx_find_channel() implementations can exploit this capability to find the best channel for an operation. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Reviewed-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * async_tx: kill tx_set_src and tx_set_dest methodsDan Williams2008-02-064-126/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tx_set_src and tx_set_dest methods were originally implemented to allow an array of addresses to be passed down from async_xor to the dmaengine driver while minimizing stack overhead. Removing these methods allows drivers to have all transaction parameters available at 'prep' time, saves two function pointers in struct dma_async_tx_descriptor, and reduces the number of indirect branches.. A consequence of moving this data to the 'prep' routine is that multi-source routines like async_xor need temporary storage to convert an array of linear addresses into an array of dma addresses. In order to keep the same stack footprint of the previous implementation the input array is reused as storage for the dma addresses. This requires that sizeof(dma_addr_t) be less than or equal to sizeof(void *). As a consequence CONFIG_DMADEVICES now depends on !CONFIG_HIGHMEM64G. It also requires that drivers be able to make descriptor resources available when the 'prep' routine is polled. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com>
| * iop-adma: use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng2008-02-061-1/+1
| | | | | | | | | | | | | | | | these three list_head are all local variables, but can also use LIST_HEAD. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* | scsi: megaraid: trivial drop duplicate mutex.h includeDaniel Walker2008-02-061-1/+0
| | | | | | | | | | Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'upstream-linus' of ↵Linus Torvalds2008-02-0610-84/+412
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix.c:piix_init_one() must be __devinit sata_via.c: Remove missleading comment. libata-core: unblacklist HITACHI drives sata_nv: fix ATAPI issues with memory over 4GB (v7) ata: drivers/ata/sata_mv.c needs dmapool.h libata: kill now unused n_iter and fix sata_fsl ahci: fix CAP.NP and PI handling sata_mv: Support SoC controllers Rename: linux/pata_platform.h to linux/ata_platform.h
| * | ata_piix.c:piix_init_one() must be __devinitAdrian Bunk2008-02-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following section mismatches: <-- snip --> ... WARNING: drivers/ata/built-in.o(.text+0x15072): Section mismatch in reference from the function piix_init_one() to the function .devinit.text:piix_init_sata_map() WARNING: drivers/ata/built-in.o(.text+0x150dd): Section mismatch in reference from the function piix_init_one() to the function .devinit.text:piix_init_pcs() WARNING: drivers/ata/built-in.o(.text+0x150e5): Section mismatch in reference from the function piix_init_one() to the function .devinit.text:piix_init_sidpr() WARNING: drivers/ata/built-in.o(.text+0x15107): Section mismatch in reference from the function piix_init_one() to the function .devinit.text:piix_check_450nx_errata() ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | sata_via.c: Remove missleading comment.Alejandro Riveira Fernández2008-02-061-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maybe for the trivial tree... sata_via.c has PATA support since: d73f30e1c9a9af14757fa5bf4014343926047156 sata_via: PATA support AFAICS so the TODO list is no longer true. Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | libata-core: unblacklist HITACHI drivesDavid Milburn2008-02-061-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HITACHI HDS7250SASUN500G and HITACHI HDS7225SBSUN250 drives do not need to be blacklisted, the NCQ problem has been resolved with the "sata_nv: fix for completion handling" patch. Signed-off-by David Milburn <dmilburn@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | sata_nv: fix ATAPI issues with memory over 4GB (v7)Robert Hancock2008-02-061-13/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes some problems with ATAPI devices on nForce4 controllers in ADMA mode on systems with memory located above 4GB. We need to delay setting the 64-bit DMA mask until the PRD table and padding buffer are allocated so that they don't get allocated above 4GB and break legacy mode (which is needed for ATAPI devices). Also, if either port is in ATAPI mode we need to set the DMA mask for the PCI device to 32-bit to ensure that the IOMMU code properly bounces requests above 4GB, as it appears setting the bounce limit does not guarantee that we will not try to map requests above this point. Reported to fix https://bugzilla.redhat.com/show_bug.cgi?id=351451 Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | ata: drivers/ata/sata_mv.c needs dmapool.hAndrew Morton2008-02-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mips: drivers/ata/sata_mv.c: In function `mv_port_free_dma_mem': drivers/ata/sata_mv.c:1080: error: implicit declaration of function `dma_pool_free' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | libata: kill now unused n_iter and fix sata_fslJames Bottomley2008-02-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | qc->n_iter was used for libata's own sg walking before sg chaining replaced it. During conversion, the field and its usage in sata_fsl were left behind. Kill the filed and update sata_fsl. tj: This was part of James's libata-use-block-layer-padding patch. Separated out by me. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | ahci: fix CAP.NP and PI handlingTejun Heo2008-02-061-16/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AHCI uses CAP.NP to indicate the number of ports and PI to tell which ports are enabled. The only requirement is that the number of ports indicated by CAP.NP should equal or be higher than the number of enabled ports in PI. CAP.NP and PI carry duplicate information and there have been some interesting cases. Some early AHCI controllers didn't set PI at all and just implement from port 0 to CAP.NP. An ICH8 board which wired four out of six available ports had 3 (4 ports) for CAP.NP and 0x33 for PI. While ESB2 has less bits set in PI than the value in CAP.NP. Till now, ahci driver assumed that PI is invalid if it doesn't match CAP.NP exactly. This violates AHCI standard and the driver ends up accessing unmimplemented ports on ESB2. This patch updates CAP.NP and PI handling such that PI can have less number of bits set than indicated in CAP.NP and the highest port is determined as the maximum port of what CAP.NP and PI indicate. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | sata_mv: Support SoC controllersSaeed Bishara2008-02-061-45/+320
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Marvell's Orion SoC includes SATA controllers based on Marvell's PCI-to-SATA 88SX controllers. This patch extends the libATA sata_mv driver to support those controllers. [edited to use linux/ata_platform.h -jg] Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | Rename: linux/pata_platform.h to linux/ata_platform.hJeff Garzik2008-02-063-3/+3
| |/ | | | | | | Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-02-0629-311/+555
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (35 commits) virtio net: fix oops on interface-up Fix PHY Lib support for gianfar and ucc_geth forcedeth: preserve registers forcedeth: phy status fix forcedeth: restart tx/rx ipvs: Make wrr "no available servers" error message rate-limited [PPPOL2TP]: Label unused warning when CONFIG_PROC_FS is not set. [NET_SCHED]: cls_flow: support classification based on VLAN tag [VLAN]: Constify skb argument to vlan_get_tag() [NET_SCHED]: cls_flow: fix key mask validity check [NET_SCHED]: em_meta: fix compile warning b43: Fix DMA for 30/32-bit DMA engines b43: fix build with CONFIG_SSB_PCIHOST=n mac80211: Is not EXPERIMENTAL anymore iwl3945-base.c: fix off-by-one errors b43legacy: fix DMA slot resource leakage b43legacy: drop packets we are not able to encrypt b43legacy: fix suspend/resume b43legacy: fix PIO crash Generic HDLC - use random_ether_addr() ...
| * \ Merge branch 'upstream-davem' of ↵David S. Miller2008-02-0620-237/+391
| |\ \ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
| | * | virtio net: fix oops on interface-upChristian Borntraeger2008-02-061-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I got the following oops during interface ifup. Unfortunately its not easily reproducable so I cant say for sure that my fix fixes this problem, but I am confident and I think its correct anyway: <2>kernel BUG at /space/kvm/drivers/virtio/virtio_ring.c:234! <4>illegal operation: 0001 [#1] PREEMPT SMP <4>Modules linked in: <4>CPU: 0 Not tainted 2.6.24zlive-guest-07293-gf1ca151-dirty #91 <4>Process swapper (pid: 0, task: 0000000000800938, ksp: 000000000084ddb8) <4>Krnl PSW : 0404300180000000 0000000000466374 (vring_disable_cb+0x30/0x34) <4> R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:3 PM:0 EA:3 <4>Krnl GPRS: 0000000000000001 0000000000000001 0000000010003800 0000000000466344 <4> 000000000e980900 00000000008848b0 000000000084e748 0000000000000000 <4> 000000000087b300 0000000000001237 0000000000001237 000000000f85bdd8 <4> 000000000e980920 00000000001137c0 0000000000464754 000000000f85bdd8 <4>Krnl Code: 0000000000466368: e3b0b0700004 lg %r11,112(%r11) <4> 000000000046636e: 07fe bcr 15,%r14 <4> 0000000000466370: a7f40001 brc 15,466372 <4> >0000000000466374: a7f4fff6 brc 15,466360 <4> 0000000000466378: eb7ff0500024 stmg %r7,%r15,80(%r15) <4> 000000000046637e: a7f13e00 tmll %r15,15872 <4> 0000000000466382: b90400ef lgr %r14,%r15 <4> 0000000000466386: a7840001 brc 8,466388 <4>Call Trace: <4>([<000201500f85c000>] 0x201500f85c000) <4> [<0000000000466556>] vring_interrupt+0x72/0x88 <4> [<00000000004801a0>] kvm_extint_handler+0x34/0x44 <4> [<000000000010d22c>] do_extint+0xbc/0xf8 <4> [<0000000000113f98>] ext_no_vtime+0x16/0x1a <4> [<000000000010a182>] cpu_idle+0x216/0x238 <4>([<000000000010a162>] cpu_idle+0x1f6/0x238) <4> [<0000000000568656>] rest_init+0xaa/0xb8 <4> [<000000000084ee2c>] start_kernel+0x3fc/0x490 <4> [<0000000000100020>] _stext+0x20/0x80 <4> <4> <0>Kernel panic - not syncing: Fatal exception in interrupt <4> After looking at the code and the dump I think the following scenario happened: Ifup was running on cpu2 and the interrupt arrived on cpu0. Now virtnet_open on cpu 2 managed to execute napi_enable and disable_cb but did not execute rx_schedule. Meanwhile on cpu 0 skb_recv_done was called by vring_interrupt, executed netif_rx_schedule_prep, which succeeded and therefore called disable_cb. This triggered the BUG_ON, as interrupts were already disabled by cpu 2. I think the proper solution is to make the call to disable_cb depend on the atomic update of NAPI_STATE_SCHED by using netif_rx_schedule_prep in the same way as skb_recv_done. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | Fix PHY Lib support for gianfar and ucc_gethAndy Fleming2008-02-062-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PHY Lib now uses mutexes instead of spin_locks. ucc_geth and gianfar both grab the locks in their mdio_reset functions, so they need to use mutex_(un)lock instead. This was not caught until someone tested it on an SMP system. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | forcedeth: preserve registersAyaz Abdulla2008-02-061-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Various registers need to be preserved before resetting the device. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | forcedeth: phy status fixAyaz Abdulla2008-02-061-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver needs to ack only the phy status bits that it is currently handling and preserve the other bits for the other handlers. For example, when reading/writing from the phy, it should not clear the link change interrupt bit. This will cause a missing link change interrupt. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | forcedeth: restart tx/rxAyaz Abdulla2008-02-061-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the issue where the transmitter and receiver must be restarted when applying new changes to certain registers. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | Generic HDLC - use random_ether_addr()Krzysztof Halasa2008-02-052-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generic HDLC now uses random_ether_addr() for generating MAC addresse for Ethernet-alike interfaces. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | Generic HDLC - remove now unneeded hdlc_device_descKrzysztof Halasa2008-02-057-28/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Removes now unneeded struct hdlc_device_desc Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | Generic HDLC - fix kernel panicKrzysztof Halasa2008-02-051-20/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes kernel panic in Frame Relay mode Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | ixgbe: add real-time traffic countersAyyappan Veeraiyan2008-02-051-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just like our other drivers before we can switch ixgbe to provide real-time packet/byte counters to the stack easily. Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | ixgbe: fix several counter register errataAyyappan Veeraiyan2008-02-051-22/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several counters behave differently on 82598 causing them to display incorrect values. Adjust the accounting so the reported numbers make sense and do not double count or represent the wrong item. Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | ixgbe: properly return CHECKSUM_NONE, cleanup csum codeAyyappan Veeraiyan2008-02-051-7/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We were not returning CHECKSUM_NONE in a lot of cases which is wrong. Move common exit points in this function and error code up before the actual work in this function. Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | ixgbe: Fix FW init/release, make this code a functionAyyappan Veeraiyan2008-02-051-10/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A gap was left in the FW release/grab code in up/down path. Fix it by making the release/grab code a function and calling it in appropriate locations. Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | ixgbe: Fix pause code for ethtoolAyyappan Veeraiyan2008-02-051-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | ixbge: Make ethtool code account for media typesAyyappan Veeraiyan2008-02-051-16/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i82598 can support various media types but this ethtool code only was coded for fiber just yet. Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | ixbge: remove TX lock and redo TX accounting.Ayyappan Veeraiyan2008-02-052-36/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This ports Herbert Xu's "maybe_stop_tx" code and removes the tx_lock which is not needed. Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | ixgbe: remove obsolete irq_sem, add driver state checking codeAyyappan Veeraiyan2008-02-053-42/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After testing we confirmed that the irq_sem can safely be removed from ixgbe. Add strict state checking code to various ethtool parts to properly protect against races between various driver reset paths. Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | xircom_cb should return NETDEV_TX_BUSY when no descriptors availableErik Mouw2008-02-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes in other networking paths uncovered a bug in the xircom_cb driver which made the kernel spew lots of the following error messages: BUG eth1 code -5 qlen 0 It turned out that the driver returned -EIO when there was no descriptor available for sending packets. It should return NETDEV_TX_BUSY instead. This was discussed on the netdev list before, see http://thread.gmane.org/gmane.linux.network/84603 . Signed-off-by: Erik Mouw <mouw@nl.linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | drivers/net/tlan.c: compilation warning fixLeonardo Potenza2008-02-051-7/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a check for the pci_register_driver() return value. Removed unused variable pad_allocated. The aim of this patch is to remove the following warning messages: drivers/net/tlan.c: In function 'tlan_probe': drivers/net/tlan.c:486: warning: ignoring return value of 'pci_register_driver', declared with attribute warn_unused_result Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | mv643xx_eth: fix byte order when checksum offload is enabledByron Bradley2008-02-051-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Marvell Orion system on chips have an integrated mv643xx MAC. On these little endian ARM devices mv643xx will oops when checksum offload is enabled. Swapping the byte order of the protocol and checksum solves this problem. Signed-off-by: Byron Bradley <byron.bbradley@gmail.com> Cc: Dale Farnsworth <dale@farnsworth.org> Cc: Manish Lachwani <mlachwani@mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | sky2: fix for Yukon FE (regression in 2.6.25)Stephen Hemminger2008-02-052-11/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Yukon FE chip has a ram buffer therefore it needs the alignment restriction and hang check workarounds. Therefore: * Autodetect the prescence/absence of ram buffer * Rename the flag value to reflect this * Use it consistently (ie don't reread register) Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | iSeries: fix section mismatch in iseries_vethStephen Rothwell2008-02-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: vmlinux.o(.text+0x25dca0): Section mismatch in reference from the function .veth_probe() to the function .init.text:.veth_probe_one() Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | Merge branch 'fixes' of ↵David S. Miller2008-02-058-73/+162
| |\ \ \ | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * | | b43: Fix DMA for 30/32-bit DMA enginesMichael Buesch2008-02-052-58/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This checks if the DMA address is bigger than what the controller can manage. It will reallocate the buffers in the GFP_DMA zone in that case. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | iwl3945-base.c: fix off-by-one errorsAdrian Bunk2008-02-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes two off-by-one errors resulting in array overflows spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | b43legacy: fix DMA slot resource leakageStefano Brivio2008-02-051-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes four resource leakages. In any error path we must deallocate the DMA frame slots we previously allocated by request_slot(). This is done by storing the ring pointers before doing any ring allocation and restoring the old pointers in case of an error. This patch by Michael Buesch has been ported to b43legacy. Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | b43legacy: drop packets we are not able to encryptStefano Brivio2008-02-054-8/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We must drop any packets we are not able to encrypt. We must not send them unencrypted or with an all-zero-key (which basically is the same as unencrypted, from a security point of view). This might only trigger shortly after resume before mac80211 reassociated and reconfigured the keys. It is safe to drop these packets, as the association they belong to is not guaranteed anymore anyway. This is a security fix in the sense that it prevents information leakage. This patch by Michael Buesch has been ported to b43legacy. Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | b43legacy: fix suspend/resumeStefano Brivio2008-02-051-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes suspend/resume work with the b43legacy driver. We must not overwrite the MAC addresses in the init function, as this would also overwrite the MAC on resume. With an all-zero MAC the device firmware is not able to ACK any received packets anymore. Fix this by moving the initializion stuff that must be done on init but not on resume to the start function. Also zero out filter_flags to make sure we don't have some flags from a previous instance for a tiny timeframe until mac80211 reconfigures them. This patch by Michael Buesch has been ported to b43legacy. Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | b43legacy: fix PIO crashStefano Brivio2008-02-051-0/+3
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the crash reported below, which seems to happen on bcm4306 rev. 2 devices only while using PIO: Oops: 0000 [#1] PREEMPT Modules linked in: b43(F) rfkill(F) led_class(F) input_polldev(F) arc4 b43legacy mac80211 cfg80211 i915 drm snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device ohci1394 ieee1394 ssb pcmcia snd_intel8x0m ehci_hcd uhci_hcd evdev Pid: 0, comm: swapper Tainted: GF (2.6.24st3 #2) EIP: 0060:[<f90f667b>] EFLAGS: 00010002 CPU: 0 EIP is at b43legacy_pio_handle_txstatus+0xbb/0x210 [b43legacy] EAX: 0000049b EBX: f11f8044 ECX: 00000001 EDX: 00000000 ESI: f1ff8000 EDI: 00000000 EBP: f11f8040 ESP: c04f4ef4 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=c04f4000 task=c0488300 task.ti=c04b8000) Stack: f90f2788 c05009f0 c0500900 000010f7 f1053823 c04f4f24 dfb8e800 00000003 f1368000 00000007 00000296 f90f1975 00001000 010c0800 01000000 00000007 f90f6391 f11f8000 00000082 c04f4f4a 00000000 00004fd0 10f70000 8c061000 Call Trace: [<f90f2788>] b43legacy_debugfs_log_txstat+0x48/0xb0 [b43legacy] [<f90f1975>] b43legacy_handle_hwtxstatus+0x75/0x80 [b43legacy] [<f90f6391>] b43legacy_pio_rx+0x201/0x280 [b43legacy] [<f90e4fa3>] b43legacy_interrupt_tasklet+0x2e3/0x870 [b43legacy] [<c0123567>] tasklet_action+0x27/0x60 [<c01237b4>] __do_softirq+0x54/0xb0 [<c010686b>] do_softirq+0x7b/0xe0 [<c01457c0>] handle_level_irq+0x0/0x110 [<c01457c0>] handle_level_irq+0x0/0x110 [<c0123758>] irq_exit+0x38/0x40 [<c0106953>] do_IRQ+0x83/0xd0 [<c011812f>] __update_rq_clock+0x4f/0x180 [<c0104b4f>] common_interrupt+0x23/0x28 [<c011007b>] wakeup_code+0x7b/0xde [<c02b1039>] acpi_processor_idle+0x24a/0x3c9 [<c01025c7>] cpu_idle+0x47/0x80 [<c04b9ad5>] start_kernel+0x205/0x290 [<c04b9360>] unknown_bootoption+0x0/0x1f0 ======================= Code: 0f 00 00 81 fb ff 00 00 00 0f 87 36 01 00 00 8d 04 db 85 ff 8d 6c c6 40 8d 5d 04 0f 85 ef 00 00 00 fe 4e 0e 0f b7 46 0c 8b 53 04 <8b> 4a 50 29 c8 83 e8 52 66 89 46 0c 8b 54 24 14 80 7a 0b 00 74 EIP: [<f90f667b>] b43legacy_pio_handle_txstatus+0xbb/0x210 [b43legacy] SS:ESP 0068:c04f4ef4 Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | | [PPPOL2TP]: Label unused warning when CONFIG_PROC_FS is not set.Rami Rosen2008-02-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_PROC_FS is not set and CONFIG_PPPOL2TP is set, we have the following warning in build: drivers/net/pppol2tp.c: In function 'pppol2tp_init': drivers/net/pppol2tp.c:2472: warning: label 'out_unregister_pppox_proto' defined but not used This patches fixes this warning by adding appropriate #ifdef. Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | fb: fix warning: no return statement in function returning non-voidAnton Vorontsov2008-02-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Warning is reproducible with selected FB_CFB_REV_PIXELS_IN_BYTE. CC drivers/video/sysfillrect.o In file included from drivers/video/sysfillrect.c:18: drivers/video/fb_draw.h: In function `fb_rev_pixels_in_long': drivers/video/fb_draw.h:94: warning: no return statement in function returning non-void CC drivers/video/syscopyarea.o In file included from drivers/video/syscopyarea.c:22: drivers/video/fb_draw.h: In function `fb_rev_pixels_in_long': drivers/video/fb_draw.h:94: warning: no return statement in function returning non-void Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | virtio: add missing #include <linux/delay.h>Johann Felix Soden2008-02-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include linux/delay.h to fix compiler error: drivers/virtio/virtio_balloon.c: In function 'fill_balloon': drivers/virtio/virtio_balloon.c:98: error: implicit declaration of function 'msleep' Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud