summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* ACPICA: Fix for Load operator, load table at the namespace rootBob Moore2008-06-111-2/+8
| | | | | | | | | | | This reverts a change introduced in version 20071019. The table is now loaded at the namespace root even though this goes against the ACPI specification. This provides compatibility with other ACPI implementations. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPICA: Ignore ACPI table signature for Load() operatorBob Moore2008-06-111-18/+7
| | | | | | | | | | | | | Only "SSDT" is acceptable to the ACPI spec, but tables are seen with OEMx and null sigs. Therefore, signature validation is worthless. Apparently MS ACPI accepts such signatures, ACPICA must be compatible. http://bugzilla.kernel.org/show_bug.cgi?id=10454 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPICA: Fix to allow zero-length ASL field declarationsBob Moore2008-06-111-4/+1
| | | | | | | | | | | Allows null field list in Field(), BankField(), and IndexField(). 2.6.26-rc1 regression: ACPI fails to load SDT. - Dell M1530 http://bugzilla.kernel.org/show_bug.cgi?id=10606 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: use memory_read_from_buffer()Akinobu Mita2008-06-111-13/+2
| | | | | | | Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* bay: exit if notify handler cannot be installedHolger Macht2008-06-111-6/+10
| | | | | | | | | | | | | If acpi_install_notify_handler() for a bay device fails, the bay driver is superfluous. Most likely, another driver (like libata) is already caring about this device anyway. Furthermore, register_hotplug_dock_device(acpi_handle) from the dock driver must not be called twice with the same handler. This would result in an endless loop consuming 100% of CPU. So clean up and exit. Signed-off-by: Holger Macht <hmacht@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* dock.c remove trailing printk whitespaceTim Pepper2008-06-111-1/+1
| | | | | | Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* proper prototype for acpi_processor_tstate_has_changed()Adrian Bunk2008-06-111-1/+0
| | | | | | | | | | This patch adds a proper prototype for acpi_processor_tstate_has_changed() in include/acpi/processor.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: handle invalid ACPI SLIT tableFenghua Yu2008-06-111-4/+27
| | | | | | | | | | | | This is a SLIT sanity checking patch. It moves slit_valid() function to generic ACPI code and does sanity checking for both x86 and ia64. It sets up node_distance with LOCAL_DISTANCE and REMOTE_DISTANCE when hitting invalid SLIT table on ia64. It also cleans up unused variable localities in acpi_parse_slit() on x86. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* PNPACPI: use _CRS IRQ descriptor length for _SRSBjorn Helgaas2008-06-111-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When configuring the resources of an ACPI device, we first evaluate _CRS to get a template of resource descriptors, then fill in the specific resource values we want, and finally evaluate _SRS to actually configure the device. Some resources have optional fields, so the size of encoded descriptors varies depending on the specific values. For example, IRQ descriptors can be either two or three bytes long. The third byte contains triggering information and can be omitted if the IRQ is edge-triggered and active high. The BIOS often assumes that IRQ descriptors in the _SRS buffer use the same format as those in the _CRS buffer, so this patch enforces that constraint. The "Start Dependent Function" descriptor also has an optional byte, but we don't currently encode those descriptors, so I didn't do anything for those. I have tested this patch on a Toshiba Portege 4000. Without the patch, parport_pc claims the parallel port only if I use "pnpacpi=off". This patch makes it work with PNPACPI. This is an extension of a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c42 References: http://bugzilla.kernel.org/show_bug.cgi?id=5832 Enabling ACPI Plug and Play in kernels >2.6.9 kills Parallel support http://bugzilla.kernel.org/show_bug.cgi?id=9487 buggy firmware expects four-byte IRQ resource descriptor (was: Serial port disappears after Suspend on Toshiba R25) http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=1d5b285da1893b90507b081664ac27f1a8a3dc5b related ACPICA fix Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* pnpacpi: fix shareable IRQ encode/decodeBjorn Helgaas2008-06-111-14/+13
| | | | | | | | | | | | When we encode IRQ resources, we should use the "shareable" flag we got from _PRS rather than guessing based on the IRQ trigger mode. This is based on a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* pnpacpi: fix IRQ flag decodingBjorn Helgaas2008-06-111-4/+12
| | | | | | | | | | | | | | | | | | | | | | | When decoding IRQ trigger mode and polarity, it is not enough to mask by IORESOURCE_BITS because there are now additional bits defined. For example, if IORESOURCE_IRQ_SHAREABLE was set, we failed to set *triggering and *polarity at all. I can't point to a failure that this patch fixes, but bugs in this area have caused problems when resuming after suspend, for example: http://bugzilla.kernel.org/show_bug.cgi?id=6316 http://bugzilla.kernel.org/show_bug.cgi?id=9487 https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/152187 This is based on a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32 [rene.herman@keyaccess.nl: fix comment] Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI 2.6.26-rc2: Add missing newline to DSDT/SSDT warning messageAlistair John Strachan2008-06-111-1/+1
| | | | | | | | | | | | | As of recently (probably 2.6.26-rc1) I've been getting the following mangling in the kernel log: [4294014.568167] ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"<6>CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d This is due to a missing newline character in the first message. The following patch against 2.6.26-rc2 fixes it. Please apply. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: EC: Use msleep instead of udelay while waiting for event.Alexey Starikovskiy2008-06-111-1/+1
| | | | | | | http://bugzilla.kernel.org/show_bug.cgi?id=10724 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
* thinkpad-acpi: fix LED handling on older ThinkPadsHenrique de Moraes Holschuh2008-06-111-27/+28
| | | | | | | | | | | | | | | | | | | | | | | | The less tested codepaths for LED handling, used on ThinkPads 570, 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 and maybe a few others, would write data to kernel memory it had no business touching, for leds number 3 and above. If one is lucky, that illegal write would cause an OOPS, but chances are it would silently corrupt a byte. The problem was introduced in commit af116101, "ACPI: thinkpad-acpi: add sysfs led class support to thinkpad leds (v3.2)". Fix the bug by refactoring the entire code to be far more obvious on what it wants to do. Also do some defensive "constification". Issue reported by Karol Lewandowski <lmctlx@gmail.com> (he's an lucky guy and got an OOPS instead of silent corruption :-) ). Root cause of the OOPS identified by Adrian Bunk <bunk@kernel.org>. Thanks, Adrian! Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Tested-by: Karol Lewandowski <lmctlx@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
* thinkpad-acpi: fix initialization error pathsHenrique de Moraes Holschuh2008-06-111-207/+230
| | | | | | | | | | | | Rework some subdriver init and exit handlers, in order to fix some initialization error paths that were missing, or broken. Hitting those bugs should be extremely rare in the real world, but should that happen, thinkpad-acpi would fail to dealocate some resources and a reboot might well be needed to be able to load the driver again. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
* thinkpad-acpi: SW_RADIO to SW_RFKILL_ALL renameHenrique de Moraes Holschuh2008-06-111-2/+2
| | | | | | | | | Rename SW_RADIO to SW_RFKILL_ALL in thinkpad-acpi code and docs, following 5adad0133907790c50283bf03271d920d6897043 "Input: rename SW_RADIO to SW_RFKILL_ALL". Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
* cpuidle acpi driver: fix oops on AC<->DCVenkatesh Pallipadi2008-06-112-11/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | cpuidle and acpi driver interaction bug with the way cpuidle_register_driver() is called. Due to this bug, there will be oops on AC<->DC on some systems, where they support C-states in one DC and not in AC. The current code does ON BOOT: Look at CST and other C-state info to see whether more than C1 is supported. If it is, then acpi processor_idle does a cpuidle_register_driver() call, which internally enables the device. ON CST change notification (AC<->DC) and on suspend-resume: acpi driver temporarily disables device, updates the device with any new C-states, and reenables the device. The problem is is on boot, there are no C2, C3 states supported and we skip the register. Later on AC<->DC, we may get a CST notification and we try to reevaluate CST and enabled the device, without actually registering it. This causes breakage as we try to create /sys fs sub directory, without the parent directory which is created at register time. Thanks to Sanjeev for reporting the problem here. http://bugzilla.kernel.org/show_bug.cgi?id=10394 Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: Disable Fixed_RTC event when installing RTC handlerZhao Yakui2008-06-112-0/+12
| | | | | | | | | | | | | The Fixed_RTC event should be disabled when installing RTC handler. Only when RTC alarm is set will it be enabled again. If it is not disabled, maybe some machines will be powered on automatically after the system is shutdown even when the RTC alarm is not set. http://bugzilla.kernel.org/show_bug.cgi?id=10010 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds2008-06-1017-24/+44
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: fix BLK_DEV_HD_ONLY on ARM dependencies ide: export ide_doubler palm_bk3710: add warm-plug support delkin_cb: add missing __init/__exit tags delkin_cb: add warm-plug support delkin_cb: use struct ide_port_info delkin_cb: set proper hwif->gendev.parent value ide: fix host drivers missing hwif->chipset initialization ide-generic: add missing hwif->chipset setup sis5513: add missing pci_enable_device() call MAINTAINERS: remove SIS 5513 IDE entry ide: remove the ide_etrax100 chipset type
| * fix BLK_DEV_HD_ONLY on ARM dependenciesAdrian Bunk2008-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch limits BLK_DEV_HD_ONLY to the ARM platforms offering IRQ_HARDDISK, fixing the following compile error on others: <-- snip --> ... CC drivers/ide/legacy/hd.o ... /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_times_out': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: 'IRQ_HARDDISK' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'do_hd_request': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:661: error: 'IRQ_HARDDISK' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_init': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:765: error: 'IRQ_HARDDISK' undeclared (first use in this function) make[3]: *** [drivers/ide/legacy/hd.o] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide: export ide_doublerAdrian Bunk2008-06-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following build error: <-- snip --> ... Building modules, stage 2. MODPOST 1204 modules ERROR: "ide_doubler" [drivers/ide/ide-core.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * palm_bk3710: add warm-plug supportBartlomiej Zolnierkiewicz2008-06-101-3/+0
| | | | | | | | | | | | | | Don't fail the probe if there are no devices attached to the controller. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * delkin_cb: add missing __init/__exit tagsBartlomiej Zolnierkiewicz2008-06-101-4/+2
| | | | | | | | | | Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * delkin_cb: add warm-plug supportBartlomiej Zolnierkiewicz2008-06-101-4/+0
| | | | | | | | | | | | Don't fail the probe if there are no devices attached to the controller. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * delkin_cb: use struct ide_port_infoBartlomiej Zolnierkiewicz2008-06-101-8/+7
| | | | | | | | | | | | | | | | Convert the driver to use struct ide_port_info - as a nice side-effect this fixes racy setup of ->io_32bit/unmask settings (after ide_device_add() call device can be already in use). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * delkin_cb: set proper hwif->gendev.parent valueBartlomiej Zolnierkiewicz2008-06-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | hwif->dev was set too late (after ide_device_add() call) so hwif->gendev.parent was not initialized properly. Fix it by setting hw.dev and letting ide_init_port_hw() do the rest. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide: fix host drivers missing hwif->chipset initializationBartlomiej Zolnierkiewicz2008-06-1011-0/+20
| | | | | | | | | | | | | | | | | | | | ide_find_port() now depends on ->chipset being set for occupied ide_hwifs[] slots so all host drivers have to initialize hwif->chipset properly. This patch fixes a regression on hosts with > 1 port or with a single port but no devices attached to it for an affected host drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide-generic: add missing hwif->chipset setupBartlomiej Zolnierkiewicz2008-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | hwif->chipset need to be set properly or ide-generic driver will break once we make a final step in fixing host drivers' dependence on ide_hwifs[]. Problem was catched early thanks to IDE tree exposure in -mm / -next trees and reported by people listed people (thank you guys!). Reported-by: "John Keller" <jpk@sgi.com> Reported-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Reported-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * sis5513: add missing pci_enable_device() callBartlomiej Zolnierkiewicz2008-06-101-0/+5
| | | | | | | | | | Cc: Riccardo Gori <goric@trivenet.it> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide: remove the ide_etrax100 chipset typeAdrian Bunk2008-06-102-4/+2
| | | | | | | | | | | | | | | | | | I forgot to remove the ide_etrax100 chipset type when removing the ETRAX_IDE driver. Reported-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* | [S390] tape_3590.c: introduce missing kfreeJulia Lawall2008-06-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) @r exists@ expression E,E1; statement S; position p1,p2,p3; @@ E =@p1 \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != E = E1 if (E == NULL || ...) S ... when != E = E1 if@p2 (...) { ... when != kfree(E) } ... when != E = E1 kfree@p3(E); @forall@ position r.p2; expression r.E; int E1 != 0; @@ * if@p2 (...) { ... when != kfree(E) when strict return E1; } Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] vt220 console, initialize list head before useCarsten Otte2008-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a null pointer dereference during initialisation when no sclp event facility is available: sclp vt220 tty driver: could not register vt220 - sclp_register returned -5 Unable to handle kernel paging request at virtual user address 0000000000000000 Oops: 0004 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted 2.6.26-rc3-kvm-bigiron-00968-gd939e93-dirty #30 Process swapper (pid: 0, task: 0000000000600be0, ksp: 000000000064a000) Krnl PSW : 0400000180000000 0000000000320d8c (sclp_unregister+0x48/0x8c) R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000000000 0000000000000000 0000000000630478 0700000000649c20 0000000000000000 0000000000433060 000000000064a660 0000000002e26000 00000000006db000 0000000000000000 0000000000a78578 0000000000649b80 0000000000630dc0 000000000044fa20 0000000000320d76 0000000000649b80 Krnl Code: 0000000000320d7c: e310c0080004 lg %r1,8(%r12) 0000000000320d82: b9040032 lgr %r3,%r2 0000000000320d86: c02000187b79 larl %r2,630478 >0000000000320d8c: e34010000024 stg %r4,0(%r1) 0000000000320d92: e31040080024 stg %r1,8(%r4) 0000000000320d98: c01100200200 lgfi %r1,2097664 0000000000320d9e: e310c0080024 stg %r1,8(%r12) 0000000000320da4: c01100100100 lgfi %r1,1048832 Call Trace: ([<0000000000320d76>] sclp_unregister+0x32/0x8c) [<00000000006657b4>] __sclp_vt220_cleanup+0xc4/0xe0 [<000000000066595c>] __sclp_vt220_init+0x18c/0x1a0 [<0000000000665aba>] sclp_vt220_con_init+0x42/0x68 [<00000000006601ca>] console_init+0x4e/0x68 [<000000000064acae>] start_kernel+0x3a2/0x4dc [<0000000000100020>] _stext+0x20/0x80 INFO: lockdep is turned off. Last Breaking-Event-Address: [<000000000041f964>] _spin_lock_irqsave+0xb0/0xb4 <4>---[ end trace 31fd0ba7d8756001 ]--- The issue is caused by a list_empty() check in __sclp_vt220_cleanup, which usually fails on non-initialized list heads that contain {NULL,NULL} instead. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cio: Fix inverted isc priorities.Cornelia Huck2008-06-101-9/+11
| | | | | | | | | | | | | | | | | | | | | | Priorities for I/O interruption subclasses range from 0 (highest) to 7 (lowest). Unfortunately, the console has been using isc 7 instead of an isc with a higher priority than regular I/O subchannels (which use 3). Fix this by making the console use isc 1. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cio: Fix sparse warnings in blacklist.c.Cornelia Huck2008-06-101-3/+3
|/ | | | | | | | | | | | | | | | | | | | | | | sparse complains about signedness: drivers/s390/cio/blacklist.c:132:28: warning: incorrect type in argument 2 (different signedness) drivers/s390/cio/blacklist.c:132:28: expected unsigned int *val drivers/s390/cio/blacklist.c:132:28: got int *cssid drivers/s390/cio/blacklist.c:136:28: warning: incorrect type in argument 2 (different signedness) drivers/s390/cio/blacklist.c:136:28: expected unsigned int *val drivers/s390/cio/blacklist.c:136:28: got int *ssid drivers/s390/cio/blacklist.c:140:28: warning: incorrect type in argument 2 (different signedness) drivers/s390/cio/blacklist.c:140:28: expected unsigned int *val drivers/s390/cio/blacklist.c:140:28: got int *devno cssid, ssid and devno are of course unsigned, so let's make the variables unsigned as well. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2008-06-092-3/+2
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/core: Remove IB_DEVICE_SEND_W_INV capability flag IB/umem: Avoid sign problems when demoting npages to integer
| * IB/core: Remove IB_DEVICE_SEND_W_INV capability flagRoland Dreier2008-06-091-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 2.6.26, we added some support for send with invalidate work requests, including a device capability flag to indicate whether a device supports such requests. However, the support was incomplete: the completion structure was not extended with a field for the key contained in incoming send with invalidate requests. Full support for memory management extensions (send with invalidate, local invalidate, fast register through a send queue, etc) is planned for 2.6.27. Since send with invalidate is not very useful by itself, just remove the IB_DEVICE_SEND_W_INV bit before the 2.6.26 final release; we will add an IB_DEVICE_MEM_MGT_EXTENSIONS bit in 2.6.27, which makes things simpler for applications, since they will not have quite as confusing an array of fine-grained bits to check. Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/umem: Avoid sign problems when demoting npages to integerRoland Dreier2008-06-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a 64-bit architecture, if ib_umem_get() is called with a size value that is so big that npages is negative when cast to int, then the length of the page list passed to get_user_pages(), namely min_t(int, npages, PAGE_SIZE / sizeof (struct page *)) will be negative, and get_user_pages() will immediately return 0 (at least since 900cf086, "Be more robust about bad arguments in get_user_pages()"). This leads to an infinite loop in ib_umem_get(), since the code boils down to: while (npages) { ret = get_user_pages(...); npages -= ret; } Fix this by taking the minimum as unsigned longs, so that the value of npages is never truncated. The impact of this bug isn't too severe, since the value of npages is checked against RLIMIT_MEMLOCK, so a process would need to have an astronomical limit or have CAP_IPC_LOCK to be able to trigger this, and such a process could already cause lots of mischief. But it does let buggy userspace code cause a kernel lock-up; for example I hit this with code that passes a negative value into a memory registartion function where it is promoted to a huge u64 value. Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | Merge git://git.infradead.org/users/cbou/battery-2.6.26Linus Torvalds2008-06-091-1/+1
|\ \ | | | | | | | | | | | | * git://git.infradead.org/users/cbou/battery-2.6.26: power_supply: Fix race in power_supply_uevent
| * | power_supply: Fix race in power_supply_ueventDmitry Baryshkov2008-06-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 54d29ad33e3483bcc7ca433a21cf294854e5154a (Power Supply: fix race in device_create) introduced a race in power_supply_uevent. Previously it checked that power_supply is available by checking for dev->driver_data. But now dev->driver_data is set before power_supply->dev is initialised. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2008-06-091-30/+10
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin serial driver: fix up tty core set_ldisc API change breakage bug Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFIN Blackfin arch: fixup warnings with the new cplb saved values Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver.
| * | | Blackfin serial driver: fix up tty core set_ldisc API change breakage bugGraf Yang2008-06-071-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the patch that follows Linus's modification about set_ldisc. Graf has built and tested it on BF537 using Linus's git Tree. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
| * | | Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver.Sonic Zhang2008-06-031-25/+5
| | |/ | |/| | | | | | | | | | | | | | | | | | | Hide difference in head file. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* | | Merge branch 'fixes' of ↵Linus Torvalds2008-06-091-1/+1
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix format string bug.
| * | [CPUFREQ] Fix format string bug.Chris Wright2008-06-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Format string bug. Not exploitable, as this is only writable by root, but worth fixing all the same. Spotted-by: Ilja van Sprundel <ilja@netric.org> Signed-off-by: Dave Jones <davej@redhat.com>
* | | Merge branch 'merge' of ↵Linus Torvalds2008-06-091-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] ehea: Remove dependency on MEMORY_HOTPLUG [POWERPC] Make walk_memory_resource available with MEMORY_HOTPLUG=n [POWERPC] Use dev_set_name in pci_64.c [POWERPC] Fix incorrect enabling of VMX when building signal or user context [POWERPC] boot/Makefile CONFIG_ variable fixes
| * | | [POWERPC] ehea: Remove dependency on MEMORY_HOTPLUGNathan Lynch2008-06-091-1/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | Now that walk_memory_resource() is available regardless of MEMORY_HOTPLUG's setting, this dependency is not needed. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | usb: r8a66597-hcd: Add support for SH7723 USB hostYoshihiro Shimoda2008-06-091-4/+4
|/ / | | | | | | | | | | | | | | | | | | R8A66597 is similar to SH7723 USB 2.0 Host/Function module. In addition, the USB of SH7366 is compatible with SH7723. It can support SH7723 USB host by changing Kconfig. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2008-06-065-11/+19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: Fix SM trap forwarding IB/ehca: Reject send WRs only for RESET, INIT and RTR state MAINTAINERS: Update NetEffect (iw_nes) entry IB/ipath: Fix device capability flags IB/ipath: Avoid test_bit() on u64 SDMA status value
| * | IB/ipath: Fix SM trap forwardingRalph Campbell2008-06-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | SM/SMA traps received by the ipath driver should be forwarded to the SM if it is running on the host. The ib_ipath driver was incorrectly replying with "bad method." Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/ehca: Reject send WRs only for RESET, INIT and RTR stateJoachim Fenkes2008-06-061-2/+4
| | | | | | | | | | | | | | | Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
OpenPOWER on IntegriCloud