summaryrefslogtreecommitdiffstats
path: root/drivers/xen/manage.c
Commit message (Collapse)AuthorAgeFilesLines
* xen/manage: Poweroff forcefully if user-space is not yet up.Konrad Rzeszutek Wilk2014-04-151-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The user can launch the guest in this sequence: xl create -p /vm.cfg [launch, but pause it] xl shutdown latest [sets control/shutdown=poweroff] xl unpause latest xl console latest [and see that the guest has completely ignored the shutdown request] In reality the guest hasn't ignored it. It registers a watch and gets a notification that there is value. It then calls the shutdown_handler which ends up calling orderly_shutdown. Unfortunately that is so early in the bootup that there are no user-space. Which means that the orderly_shutdown fails. But since the force flag was set to false it continues on without reporting. What we really want to is to use the force when we are in the SYSTEM_BOOTING state and not use the 'force' when SYSTEM_RUNNING. However, if we are in the running state - and the shutdown command has been given before the user-space has been setup, there is nothing we can do. Worst yet, we stop ignoring the 'xl shutdown' requests! As such, the other part of this patch is to only stop ignoring the 'xl shutdown' when we are truly in the power off sequence. That means the user can do multiple 'xl shutdown' and we will try to act on them instead of ignoring them. Fixes-Bug: http://bugs.xenproject.org/xen/bug/6 Reported-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen/acpi-processor: fix enabling interrupts on syscore_resumeStanislaw Gruszka2014-03-181-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | syscore->resume() callback is expected to do not enable interrupts, it generates warning like below otherwise: [ 9386.365390] WARNING: CPU: 0 PID: 6733 at drivers/base/syscore.c:104 syscore_resume+0x9a/0xe0() [ 9386.365403] Interrupts enabled after xen_acpi_processor_resume+0x0/0x34 [xen_acpi_processor] ... [ 9386.365429] Call Trace: [ 9386.365434] [<ffffffff81667a8b>] dump_stack+0x45/0x56 [ 9386.365437] [<ffffffff8106921d>] warn_slowpath_common+0x7d/0xa0 [ 9386.365439] [<ffffffff8106928c>] warn_slowpath_fmt+0x4c/0x50 [ 9386.365442] [<ffffffffa0261bb0>] ? xen_upload_processor_pm_data+0x300/0x300 [xen_acpi_processor] [ 9386.365443] [<ffffffff814055fa>] syscore_resume+0x9a/0xe0 [ 9386.365445] [<ffffffff810aef42>] suspend_devices_and_enter+0x402/0x470 [ 9386.365447] [<ffffffff810af128>] pm_suspend+0x178/0x260 On xen_acpi_processor_resume() we call various procedures, which are non atomic and can enable interrupts. To prevent the issue introduce separate resume notify called after we enable interrupts on resume and before we call other drivers resume callbacks. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2013-07-061-3/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core updates from Thomas Gleixner: "The timer changes contain: - posix timer code consolidation and fixes for odd corner cases - sched_clock implementation moved from ARM to core code to avoid duplication by other architectures - alarm timer updates - clocksource and clockevents unregistration facilities - clocksource/events support for new hardware - precise nanoseconds RTC readout (Xen feature) - generic support for Xen suspend/resume oddities - the usual lot of fixes and cleanups all over the place The parts which touch other areas (ARM/XEN) have been coordinated with the relevant maintainers. Though this results in an handful of trivial to solve merge conflicts, which we preferred over nasty cross tree merge dependencies. The patches which have been committed in the last few days are bug fixes plus the posix timer lot. The latter was in akpms queue and next for quite some time; they just got forgotten and Frederic collected them last minute." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) hrtimer: Remove unused variable hrtimers: Move SMP function call to thread context clocksource: Reselect clocksource when watchdog validated high-res capability posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting posix_timers: fix racy timer delta caching on task exit posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule() selftests: add basic posix timers selftests posix_cpu_timers: consolidate expired timers check posix_cpu_timers: consolidate timer list cleanups posix_cpu_timer: consolidate expiry time type tick: Sanitize broadcast control logic tick: Prevent uncontrolled switch to oneshot mode tick: Make oneshot broadcast robust vs. CPU offlining x86: xen: Sync the CMOS RTC as well as the Xen wallclock x86: xen: Sync the wallclock when the system time is set timekeeping: Indicate that clock was set in the pvclock gtod notifier timekeeping: Pass flags instead of multiple bools to timekeeping_update() xen: Remove clock_was_set() call in the resume path hrtimers: Support resuming with two or more CPUs online (but stopped) timer: Fix jiffies wrap behavior of round_jiffies_common() ...
| * xen: Remove clock_was_set() call in the resume pathDavid Vrabel2013-06-281-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 359cdd3f866(xen: maintain clock offset over save/restore) added a clock_was_set() call into the xen resume code to propagate the system time changes. With the modified hrtimer resume code, which makes sure that all cpus are notified this call is not longer necessary. [ tglx: Separated it from the hrtimer change ] Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-2-git-send-email-david.vrabel@citrix.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | xen: Convert printks to pr_<level>Joe Perches2013-06-281-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert printks to pr_<level> (excludes printk(KERN_DEBUG...) to be more consistent throughout the xen subsystem. Add pr_fmt with KBUILD_MODNAME or "xen:" KBUILD_MODNAME Coalesce formats and add missing word spaces Add missing newlines Align arguments and reflow to 80 columns Remove DRV_NAME from formats as pr_fmt adds the same content This does change some of the prefixes of these messages but it also does make them more consistent. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | xen: ifdef CONFIG_HIBERNATE_CALLBACKS xen_*_suspendStefano Stabellini2013-06-281-1/+1
|/ | | | | | | | | | | | | | | | xen_hvm_post_suspend, xen_pre_suspend, xen_post_suspend are only used if CONFIG_HIBERNATE_CALLBACKS is defined, resulting in: drivers/xen/manage.c:46:13: warning: ‘xen_hvm_post_suspend’ defined but not used [-Wunused-function] drivers/xen/manage.c:52:13: warning: ‘xen_pre_suspend’ defined but not used [-Wunused-function] drivers/xen/manage.c:59:13: warning: ‘xen_post_suspend’ defined but not used [-Wunused-function] If the kernel config is missing CONFIG_HIBERNATE_CALLBACKS. Simply ifdef CONFIG_HIBERNATE_CALLBACKS the three functions. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* xen/resume: Fix compile warnings.Konrad Rzeszutek Wilk2012-04-191-0/+1
| | | | | | | linux/drivers/xen/manage.c: In function 'do_suspend': linux/drivers/xen/manage.c:160:5: warning: 'si.cancelled' may be used uninitialized in this function Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* PM / Sleep: Introduce "late suspend" and "early resume" of devicesRafael J. Wysocki2012-01-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current device suspend/resume phases during system-wide power transitions appear to be insufficient for some platforms that want to use the same callback routines for saving device states and related operations during runtime suspend/resume as well as during system suspend/resume. In principle, they could point their .suspend_noirq() and .resume_noirq() to the same callback routines as their .runtime_suspend() and .runtime_resume(), respectively, but at least some of them require device interrupts to be enabled while the code in those routines is running. It also makes sense to have device suspend-resume callbacks that will be executed with runtime PM disabled and with device interrupts enabled in case someone needs to run some special code in that context during system-wide power transitions. Apart from this, .suspend_noirq() and .resume_noirq() were introduced as a workaround for drivers using shared interrupts and failing to prevent their interrupt handlers from accessing suspended hardware. It appears to be better not to use them for other porposes, or we may have to deal with some serious confusion (which seems to be happening already). For the above reasons, introduce new device suspend/resume phases, "late suspend" and "early resume" (and analogously for hibernation) whose callback will be executed with runtime PM disabled and with device interrupts enabled and whose callback pointers generally may point to runtime suspend/resume routines. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
* xen: Add export.h for THIS_MODULE/EXPORT_SYMBOL to various xen users.Paul Gortmaker2011-10-311-0/+1
| | | | | | | | Things like THIS_MODULE and EXPORT_SYMBOL were simply everywhere because module.h was also everywhere. But we are fixing the latter. So we need to call out the real users in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* PM: Remove sysdev suspend, resume and shutdown operationsRafael J. Wysocki2011-05-111-7/+1
| | | | | | | | | | | | Since suspend, resume and shutdown operations in struct sysdev_class and struct sysdev_driver are not used any more, remove them. Also drop sysdev_suspend(), sysdev_resume() and sysdev_shutdown() used for executing those operations and modify all of their users accordingly. This reduces kernel code size quite a bit and reduces its complexity. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* PM: Add missing syscore_suspend() and syscore_resume() callsRafael J. Wysocki2011-04-201-1/+8
| | | | | | | | | | | | | | | | | | Device suspend/resume infrastructure is used not only by the suspend and hibernate code in kernel/power, but also by APM, Xen and the kexec jump feature. However, commit 40dc166cb5dddbd36aa4ad11c03915ea (PM / Core: Introduce struct syscore_ops for core subsystems PM) failed to add syscore_suspend() and syscore_resume() calls to that code, which generally leads to breakage when the features in question are used. To fix this problem, add the missing syscore_suspend() and syscore_resume() calls to arch/x86/kernel/apm_32.c, kernel/kexec.c and drivers/xen/manage.c. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Ian Campbell <ian.campbell@citrix.com>
* PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKSRafael J. Wysocki2011-04-111-3/+3
| | | | | | | | | | | | | | | | | | | | | Xen save/restore is going to use hibernate device callbacks for quiescing devices and putting them back to normal operations and it would need to select CONFIG_HIBERNATION for this purpose. However, that also would cause the hibernate interfaces for user space to be enabled, which might confuse user space, because the Xen kernels don't support hibernation. Moreover, it would be wasteful, as it would make the Xen kernels include a substantial amount of code that they would never use. To address this issue introduce new power management Kconfig option CONFIG_HIBERNATE_CALLBACKS, such that it will only select the code that is necessary for the hibernate device callbacks to work and make CONFIG_HIBERNATION select it. Then, Xen save/restore will be able to select CONFIG_HIBERNATE_CALLBACKS without dragging the entire hibernate code along with it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
* xen: use freeze/restore/thaw PM events for suspend/resume/chkptShriram Rajagopalan2011-03-161-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use PM_FREEZE, PM_THAW and PM_RESTORE power events for suspend/resume/checkpoint functionality, instead of PM_SUSPEND and PM_RESUME. Use of these pm events fixes the Xen Guest hangup when taking checkpoints. When a suspend event is cancelled (while taking checkpoints once/continuously), we use PM_THAW instead of PM_RESUME. PM_RESTORE is used when suspend is not cancelled. See Documentation/power/devices.txt and linux/pm.h for more info about freeze, thaw and restore. The sequence of pm events in a suspend-resume scenario is shown below. dpm_suspend_start(PMSG_FREEZE); dpm_suspend_noirq(PMSG_FREEZE); sysdev_suspend(PMSG_FREEZE); cancelled = suspend_hypercall() sysdev_resume(); dpm_resume_noirq(cancelled ? PMSG_THAW : PMSG_RESTORE); dpm_resume_end(cancelled ? PMSG_THAW : PMSG_RESTORE); Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* xen: suspend: remove xen_hvm_suspendIan Campbell2011-02-251-42/+1
| | | | | | | | It is now identical to xen_suspend, the differences are encapsulated in the suspend_info struct. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* xen: suspend: pull pre/post suspend hooks out into suspend_infoIan Campbell2011-02-251-5/+18
| | | | | Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* xen: suspend: move arch specific pre/post suspend hooks into generic hooksIan Campbell2011-02-251-7/+7
| | | | | Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* xen: suspend: refactor non-arch specific pre/post suspend hooksIan Campbell2011-02-251-5/+20
| | | | | Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* xen: suspend: add "arch" to pre/post suspend hooksIan Campbell2011-02-251-3/+3
| | | | | | | xen_pre_device_suspend is unused on ia64. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* xen: suspend: pass extra hypercall argument via suspend_info structIan Campbell2011-02-251-2/+8
| | | | | Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* xen: suspend: refactor cancellation flag into a structureIan Campbell2011-02-251-13/+19
| | | | | | | Will add extra fields in subsequent patches. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* xen: suspend: use HYPERVISOR_suspend for PVHVM case instead of open codingIan Campbell2011-02-251-2/+6
| | | | | Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* xen: do not respond to unknown xenstore control requestsIan Campbell2011-02-251-12/+37
| | | | | | | | | | | | | | | | | | | The PV xenbus control/shutdown node is written by the toolstack as a request to the guest to perform a particular action (shutdown, reboot, suspend etc). The guest is expected to acknowledge that it will complete a request by clearing the control node. Previously it would acknowledge any request, even if it did not know what to do with it. Specifically in the case where CONFIG_PM_SLEEP is not enabled the kernel would acknowledge a suspend request even though it was not actually going to do anything. Instead make the kernel only acknowledge requests if it is actually going to do something with it. This will improve the toolstack's ability to diagnose and deal with failures. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* xen: no need to delay xen_setup_shutdown_event for hvm guests anymoreStefano Stabellini2011-02-251-13/+4
| | | | | | | | | Now that xenstore_ready is used correctly for PV on HVM guests too, we don't need to delay the initialization of xen_setup_shutdown_event anymore. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
* xen: suspend and resume system devices when running PVHVMIan Campbell2011-02-171-0/+10
| | | | | | | | | | | | Otherwise we fail to properly suspend/resume all of the emulated devices. Something between 2.6.38-rc2 and rc3 appears to have exposed this issue, but it's always been wrong not to do this. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
* xen: resume the pv console for hvm guests tooStefano Stabellini2010-12-021-0/+1
| | | | Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
* Input: sysrq - drop tty argument form handle_sysrq()Dmitry Torokhov2010-08-211-1/+1
| | | | | | | | | | | | | | | | Sysrq operations do not accept tty argument anymore so no need to pass it to us. [Stephen Rothwell <sfr@canb.auug.org.au>: fix build breakage in drm code caused by sysrq using bool but not including linux/types.h] [Sachin Sant <sachinp@in.ibm.com>: fix build breakage in s390 keyboadr driver] Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* xen: Add suspend/resume support for PV on HVM guests.Stefano Stabellini2010-07-221-4/+41
| | | | | | | | | Suspend/resume requires few different things on HVM: the suspend hypercall is different; we don't need to save/restore memory related settings; except the shared info page and the callback mechanism. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
* xen: Xen PCI platform device driver.Stefano Stabellini2010-07-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add the xen pci platform device driver that is responsible for initializing the grant table and xenbus in PV on HVM mode. Few changes to xenbus and grant table are necessary to allow the delayed initialization in HVM mode. Grant table needs few additional modifications to work in HVM mode. The Xen PCI platform device raises an irq every time an event has been delivered to us. However these interrupts are only delivered to vcpu 0. The Xen PCI platform interrupt handler calls xen_hvm_evtchn_do_upcall that is a little wrapper around __xen_evtchn_do_upcall, the traditional Xen upcall handler, the very same used with traditional PV guests. When running on HVM the event channel upcall is never called while in progress because it is a normal Linux irq handler (and we cannot switch the irq chip wholesale to the Xen PV ones as we are running QEMU and might have passed in PCI devices), therefore we cannot be sure that evtchn_upcall_pending is 0 when returning. For this reason if evtchn_upcall_pending is set by Xen we need to loop again on the event channels set pending otherwise we might loose some event channel deliveries. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
* xen: fix build when SYSRQ is disabledRandy Dunlap2010-05-251-5/+9
| | | | | | | | | | | | Fix build error when CONFIG_MAGIC_SYSRQ is not enabled: drivers/xen/manage.c:223: error: implicit declaration of function 'handle_sysrq' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* stop_machine: reimplement using cpu_stopTejun Heo2010-05-061-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reimplement stop_machine using cpu_stop. As cpu stoppers are guaranteed to be available for all online cpus, stop_machine_create/destroy() are no longer necessary and removed. With resource management and synchronization handled by cpu_stop, the new implementation is much simpler. Asking the cpu_stop to execute the stop_cpu() state machine on all online cpus with cpu hotplug disabled is enough. stop_machine itself doesn't need to manage any global resources anymore, so all per-instance information is rolled into struct stop_machine_data and the mutex and all static data variables are removed. The previous implementation created and destroyed RT workqueues as necessary which made stop_machine() calls highly expensive on very large machines. According to Dimitri Sivanich, preventing the dynamic creation/destruction makes booting faster more than twice on very large machines. cpu_stop resources are preallocated for all online cpus and should have the same effect. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Dimitri Sivanich <sivanich@sgi.com>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* xen: fix hang on suspend.Ian Campbell2010-01-131-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 65f63384 "xen: improve error handling in do_suspend" I said: - xs_suspend()/xs_resume() and dpm_suspend_noirq()/dpm_resume_noirq() were not nested in the obvious way. and changed the ordering of the calls as so: BEFORE AFTER xs_suspend dpm_suspend_noirq dpm_suspend_noirq xs_suspend *SUSPEND* *SUSPEND* dpm_resume_noirq dpm_resume_noirq xs_resume xs_resume Clearly this is not an improvement and I was talking rubbish. In particular the new ordering is susceptible to a hang if a xenstore write is in progress at the point at which the suspend kicks in. When the suspend process calls xs_suspend it tries to take the request_mutex but if a write is in progress it could be looping in xenbus_xs.c:read_reply() waiting for something to arrive on &xs_state.reply_list while holding the request_mutex (taken in the caller of read_reply). However if we have done dpm_suspend_noirq before xs_suspend then we won't get any more xenstore interrupts and process_msg() will never be woken up to add anything to the reply_list. Fix this by calling xs_suspend before dpm_suspend_noirq. If dpm_suspend_noirq fails then make sure we go through the xs_suspend_cancel() code path. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org>
* xen: explicitly create/destroy stop_machine workqueues outside ↵Ian Campbell2009-12-031-1/+11
| | | | | | | | | | | | | | | | | | | | | | | suspend/resume region. I have observed cases where the implicit stop_machine_destroy() done by stop_machine() hangs while destroying the workqueues, specifically in kthread_stop(). This seems to be because timer ticks are not restarted until after stop_machine() returns. Fortunately stop_machine provides a facility to pre-create/post-destroy the workqueues so use this to ensure that workqueues are only destroyed after everything is really up and running again. I only actually observed this failure with 2.6.30. It seems that newer kernels are somehow more robust against doing kthread_stop() without timer interrupts (I tried some backports of some likely looking candidates but did not track down the commit which added this robustness). However this change seems like a reasonable belt&braces thing to do. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org>
* xen: improve error handling in do_suspend.Ian Campbell2009-12-031-9/+11
| | | | | | | | | | | | | | | | | | The existing error handling has a few issues: - If freeze_processes() fails it exits with shutting_down = SHUTDOWN_SUSPEND. - If dpm_suspend_noirq() fails it exits without resuming xenbus. - If stop_machine() fails it exits without resuming xenbus or calling dpm_resume_end(). - xs_suspend()/xs_resume() and dpm_suspend_noirq()/dpm_resume_noirq() were not nested in the obvious way. Fix by ensuring each failure case goto's the correct label. Treat a failure of stop_machine() as a cancelled suspend in order to follow the correct resume path. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org>
* xen: don't call dpm_resume_noirq() with interrupts disabled.Jeremy Fitzhardinge2009-12-031-4/+3
| | | | | | | | | dpm_resume_noirq() takes a mutex, so it can't be called from a no-interrupt context. Don't call it from within the stop-machine function, but just afterwards, since we're resuming anyway, regardless of what happened. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org>
* PM core: rename suspend and resume functionsAlan Stern2009-06-121-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1241) renames a bunch of functions in the PM core. Rather than go through a boring list of name changes, suffice it to say that in the end we have a bunch of pairs of functions: device_resume_noirq dpm_resume_noirq device_resume dpm_resume device_complete dpm_complete device_suspend_noirq dpm_suspend_noirq device_suspend dpm_suspend device_prepare dpm_prepare in which device_X does the X operation on a single device and dpm_X invokes device_X for all devices in the dpm_list. In addition, the old dpm_power_up and device_resume_noirq have been combined into a single function (dpm_resume_noirq). Lastly, dpm_suspend_start and dpm_resume_end are the renamed versions of the former top-level device_suspend and device_resume routines. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* PM: Rename device_power_down/up()Magnus Damm2009-06-121-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Rename the functions performing "_noirq" dev_pm_ops operations from device_power_down() and device_power_up() to device_suspend_noirq() and device_resume_noirq(). The new function names are chosen to show that the functions are responsible for calling the _noirq() versions to finalize the suspend/resume operation. The current function names do not perform power down/up anymore so the names may be misleading. Global function renames: - device_power_down() -> device_suspend_noirq() - device_power_up() -> device_resume_noirq() Static function renames: - suspend_device_noirq() -> __device_suspend_noirq() - resume_device_noirq() -> __device_resume_noirq() Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Len Brown <lenb@kernel.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* Merge commit 'origin/master' into for-linus/xen/masterJeremy Fitzhardinge2009-04-071-6/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * commit 'origin/master': (4825 commits) Fix build errors due to CONFIG_BRANCH_TRACER=y parport: Use the PCI IRQ if offered tty: jsm cleanups Adjust path to gpio headers KGDB_SERIAL_CONSOLE check for module Change KCONFIG name tty: Blackin CTS/RTS Change hardware flow control from poll to interrupt driven Add support for the MAX3100 SPI UART. lanana: assign a device name and numbering for MAX3100 serqt: initial clean up pass for tty side tty: Use the generic RS485 ioctl on CRIS tty: Correct inline types for tty_driver_kref_get() splice: fix deadlock in splicing to file nilfs2: support nanosecond timestamp nilfs2: introduce secondary super block nilfs2: simplify handling of active state of segments nilfs2: mark minor flag for checkpoint created by internal operation nilfs2: clean up sketch file nilfs2: super block operations fix endian bug ... Conflicts: arch/x86/include/asm/thread_info.h arch/x86/lguest/boot.c drivers/xen/manage.c
| * PM: Rework handling of interrupts during suspend-resumeRafael J. Wysocki2009-03-301-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the functions introduced in by the previous patch, suspend_device_irqs(), resume_device_irqs() and check_wakeup_irqs(), to rework the handling of interrupts during suspend (hibernation) and resume. Namely, interrupts will only be disabled on the CPU right before suspending sysdevs, while device drivers will be prevented from receiving interrupts, with the help of the new helper function, before their "late" suspend callbacks run (and analogously during resume). In addition, since the device interrups are now disabled before the CPU has turned all interrupts off and the CPU will ACK the interrupts setting the IRQ_PENDING bit for them, check in sysdev_suspend() if any wake-up interrupts are pending and abort suspend if that's the case. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu>
* | xen: use device model for suspending xenbus devicesIan Campbell2009-03-301-5/+4
| | | | | | | | | | Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
* | xen: resume interrupts before system devices.Ian Campbell2009-03-301-3/+3
|/ | | | | | | | | | Impact: bugfix Xen domain restore Otherwise the first timer interrupt after resume is missed and we never get another. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
* Merge branch 'linus' into x86/apicIngo Molnar2009-02-221-0/+8
|\ | | | | | | | | | | | | | | | | | | Conflicts: arch/x86/mach-default/setup.c Semantic conflict resolution: arch/x86/kernel/setup.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * PM: Split up sysdev_[suspend|resume] from device_power_[down|up]Rafael J. Wysocki2009-02-221-0/+8
| | | | | | | | | | | | | | | | | | | | | | Move the sysdev_suspend/resume from the callee to the callers, with no real change in semantics, so that we can rework the disabling of interrupts during suspend/hibernation. This is based on an earlier patch from Linus. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | cpumask: convert misc driver functionsRusty Russell2009-01-111-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | Impact: use new cpumask API. Convert misc driver functions to use struct cpumask. To Do: - Convert iucv_buffer_cpumask to cpumask_var_t. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Cc: Robert Richter <robert.richter@amd.com> Cc: oprofile-list@lists.sf.net Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: virtualization@lists.osdl.org Cc: xen-devel@lists.xensource.com Cc: Ursula Braun <ursula.braun@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org
* xen: don't reload cr3 on suspendJeremy Fitzhardinge2008-10-231-2/+0
| | | | | | | | It isn't necessary, and it makes the code needlessly non-portable. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* stop_machine: wean Xen off stop_machine_runRusty Russell2008-08-261-1/+1
| | | | | | | This is the last use of (the deprecated) stop_machine_run in the tree. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
* linux-next: pci tree build failureStephen Rothwell2008-07-181-2/+2
| | | | | | | | | | | | | | | | | | | Today's linux-next build (x86_64 allmodconfig) failed like this: drivers/xen/manage.c: In function 'xen_suspend': drivers/xen/manage.c:66: error: too few arguments to function 'device_power_up' drivers/xen/manage.c: In function 'do_suspend': drivers/xen/manage.c:117: error: too few arguments to function 'device_resume' Caused by commit 1eede070a59e1cc73da51e1aaa00d9ab86572cfc ("Introduce new top level suspend and hibernation callbacks") interacting with new usages ... Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* xen: add xen_arch_resume()/xen_timer_resume hook for ia64 supportIsaku Yamahata2008-07-161-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | add xen_timer_resume() hook. Timer resume should be done after event channel is resumed. add xen_arch_resume() hook when ipi becomes usable after resume. After resume, some cpu specific resource must be reinitialized on ia64 that can't be set by another cpu. However available hooks is run once on only one cpu so that ipi has to be used. During stop_machine_run() ipi can't be used because interrupt is masked. So add another hook after stop_machine_run(). Another approach might be use resume hook which is run by device_resume(). However device_resume() may be executed on suspend error recovery path. So it is necessary to determine whether it is executed on real resume path or error recovery path. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* CONFIG_PM_SLEEP fix: xen: fix compilation when CONFIG_PM_SLEEP is disabledJeremy Fitzhardinge2008-06-021-0/+2
| | | | | | | | Xen save/restore depends on CONFIG_PM_SLEEP being set for device_power_up/down. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* xen: maintain clock offset over save/restoreJeremy Fitzhardinge2008-05-271-3/+12
| | | | | | | | | | Hook into the device model to make sure that timekeeping's resume handler is called. This deals with our clocksource's non-monotonicity over the save/restore. Explicitly call clock_has_changed() to make sure that all the timers get retriggered properly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
OpenPOWER on IntegriCloud