summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog
Commit message (Collapse)AuthorAgeFilesLines
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-02-192-2/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5405/1: ep93xx: remove unused gesbc9312.h header [ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC [ARM] omap: fix clock reparenting in omap2_clk_set_parent() [ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0 [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo() [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support [ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller [ARM] 5391/1: AT91: Enable GPIO clocks earlier [ARM] 5390/1: AT91: Watchdog fixes [ARM] 5398/1: Add Wan ZongShun to MAINTAINERS for W90P910 [ARM] omap: fix _omap2_clksel_get_src_field() [ARM] omap: fix omap2_divisor_to_clksel() error return value
| * [ARM] 5390/1: AT91: Watchdog fixesAndrew Victor2009-02-142-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recently merged AT91SAM9 watchdog driver uses the AT91SAM9X_WATCHDOG config variable, whereas the original version of the driver (and the platform support code) used AT91SAM9_WATCHDOG. This causes the watchdog platform_device to never be registered, and therefore the driver not to be initialized. This patch: - updates the platform support code to use AT91SAM9X_WATCHDOG. - includes <linux/io.h> to fix compile error (same fix as was applied to at91rm9200_wdt.c) - fixes comment regarding watchdog clock-rates in at91rm9200. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [WATCHDOG] iTCO_wdt: fix SMI_EN regression 2Wim Van Sebroeck2009-02-143-26/+43
|/ | | | | | | | | | bugzilla: #12363 commit 7cd5b08be3c489df11b559fef210b81133764ad4 added a second regression: some Dell's and Compaq's lockup on boot. So we revert most of the code. The ICH9 reboot issue remains in place and will need some more fixing... :-( Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [ARM] omap: watchdog: allow OMAP watchdog driver on OMAP34xx platformsRussell King2009-01-241-3/+3
| | | | | | | | | | | | The driver was updated for OMAP34xx, but the Kconfig file was missed. So this adds the missing parts from d99241c in Tony Lindgren's tree: Add watchdog timer support for TI OMAP3430. Signed-off-by: Madhusudhan Chikkature <madhu.cr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 5370/1: at91: fix rm9200 watchdogJean-Christop PLAGNIOL-VILLARD2009-01-241-0/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [WATCHDOG] Pika Warp appliance watchdog timerSean MacLennan2009-01-123-0/+310
| | | | | | | | The FPGA based watchdog timer used by the Pika Warp appliance. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timerMartyn Welch2009-01-123-0/+337
| | | | | | | | | | | | | | | | | | GE Fanuc SBC610 Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310, SBC610 and PPC9A Single Board Computers. This patch adds support for the watchdog timer found in one of the devices FPGAs. There are two identical watchdog timers at different offsets in the above mentioned boards, this driver is capable of supporting one of them. The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] wm8350: Fix section annotationsMark Brown2009-01-121-3/+3
| | | | | | | | | | The probe and remove functions were incorrectly annotated, with the misannotation of the remove function causing build failures when built in. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] Add support for the WM8350 watchdogMark Brown2008-12-313-0/+337
| | | | | | | | | | | | | | | This driver implements support for the watchdog functionality provided by the Wolfson Microelectronics WM8350, a multi-function audio and power management subsystem intended for use in embedded systems. It is based on a driver originally written by Graeme Gregory, though it has been extensively modified since then. Use of a GPIO to kick the watchdog is not yet supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* [WATCHDOG] Add SMSC SCH311x Watchdog Timer.Wim Van Sebroeck2008-12-313-0/+591
| | | | | | | | | Add a watchdog driver for the hardware watchdog timer on the SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset. Tested-by: Marco Chiappero <marco@absence.it> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] ib700wdt - add timeout parameterWim Van Sebroeck2008-12-311-30/+19
| | | | | | | Add the timeout module parameter to ib700wdt.c Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* Merge branch 'for-rmk' of ↵Russell King2008-12-291-5/+6
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
| * [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constantEric Miao2008-12-291-5/+6
| | | | | | | | | | | | | | | | | | | | See description of commit: [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant for additional information. Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | Merge branch 'omap3-upstream' of ↵Russell King2008-12-154-88/+116
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
| * | iTCO_wdt: fix typo when setting TCO_EN bitLinus Torvalds2008-12-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code used '&= 0x00002000' when it tried to set the TCO_EN bit, which obviously didn't set that bit at all, but instead just reset all the other bits in the SMI_EN register. This bug seemingly caused various random behavior, with Frans Pop reporting that X.org just silently hung at startup and Rafael Wysocki reports the fan spinning with full speed. See http://lkml.org/lkml/2008/12/3/178 http://bugzilla.kernel.org/show_bug.cgi?id=12162 The problem seems to have been triggered by "[WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards" (commit 7cd5b08be3c489df11b559fef210b81133764ad4), but the bogus code existed before that too (in the "supermicro_old_pre_stop()" function), it just apparently never showed up due to different logic. In that commit the broken code got moved around and now gets executed much more. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Frans Pop <elendil@planet.nl> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | [WATCHDOG] hpwdt: Fix kdump when using hpwdtBernhard Walle2008-12-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the "hpwdt" module is loaded (even if the /dev/watchdog device is not opened), then kdump does not work. The panic kernel either does not start at all or crash in various places. The problem is that hpwdt_pretimeout is registered with register_die_notifier() with the highest possible priority. Because it returns NOTIFY_STOP, the crash_nmi_callback which is also registered with register_die_notifier() is never executed. This causes the shutdown of other CPUs to fail. Reverting the order is no option: The crash_nmi_callback executes HLT and so never returns normally. Because of that, it must be executed as last notifier, which currently is done. So, that patch returns NOTIFY_OK to keep the crash_nmi_callback executed. Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Cc: Vivek Goyal <vgoyal@redhat.com>
| * | [WATCHDOG] hpwdt: set the mapped BIOS address space as executableBernhard Walle2008-11-211-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The address provided by the SMBIOS/DMI CRU information is mapped via ioremap() in the virtual address space. However, since the address is executed (i.e. call'd), we need to set that pages as executable. Without that, I get following oops on a HP ProLiant DL385 G2 machine with BIOS from 05/29/2008 when I trigger crashdump: BUG: unable to handle kernel paging request at ffffc20011090c00 IP: [<ffffc20011090c00>] 0xffffc20011090c00 PGD 12f813067 PUD 7fe6a067 PMD 7effe067 PTE 80000000fffd3173 Oops: 0011 [1] SMP last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map CPU 1 Modules linked in: autofs4 ipv6 af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 fuse loop dm_mod rtc_cmos ipmi_si sg rtc_core i2c _piix4 ipmi_msghandler bnx2 sr_mod container button i2c_core hpilo joydev pcspkr rtc_lib shpchp hpwdt cdrom pci_hotplug usbhid hid ff_memless ohci_hcd ehci_hcd uhci_hcd usbcore edd ext3 mbcache jbd fan ide_pci_generic serverworks ide_core p ata_serverworks pata_acpi cciss ata_generic libata scsi_mod dock thermal process or thermal_sys hwmon Supported: Yes Pid: 0, comm: swapper Not tainted 2.6.27.5-HEAD_20081111100657-default #1 RIP: 0010:[<ffffc20011090c00>] [<ffffc20011090c00>] 0xffffc20011090c00 RSP: 0018:ffff88012f6f9e68 EFLAGS: 00010046 RAX: 0000000000000d02 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88012f6f9e98 R08: 666666666666660a R09: ffffffffa1006fc0 R10: 0000000000000000 R11: ffff88012f6f3ea8 R12: ffffc20011090c00 R13: ffff88012f6f9ee8 R14: 000000000000000e R15: 0000000000000000 FS: 00007ff70b29a6f0(0000) GS:ffff88012f6512c0(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffffc20011090c00 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff88012f6f2000, task ffff88007fa8a1c0) Stack: ffffffffa0f8502b 0000000000000002 ffffffff80738d50 0000000000000000 0000000000000046 0000000000000046 00000000fffffffe ffffffffa0f852ec 0000000000000000 ffffffff804ad9a6 0000000000000000 0000000000000000 Call Trace: Inexact backtrace: <NMI> [<ffffffffa0f8502b>] ? asminline_call+0x2b/0x55 [hpwdt] [<ffffffffa0f852ec>] hpwdt_pretimeout+0x3c/0xa0 [hpwdt] [<ffffffff804ad9a6>] ? notifier_call_chain+0x29/0x4c [<ffffffff802587e4>] ? notify_die+0x2d/0x32 [<ffffffff804abbdc>] ? default_do_nmi+0x53/0x1d9 [<ffffffff804abd90>] ? do_nmi+0x2e/0x43 [<ffffffff804ab552>] ? nmi+0xa2/0xd0 [<ffffffff80221ef9>] ? native_safe_halt+0x2/0x3 <<EOE>> [<ffffffff8021345d>] ? default_idle+0x38/0x54 [<ffffffff8021359a>] ? c1e_idle+0x118/0x11c [<ffffffff8020b3b5>] ? cpu_idle+0xa9/0xf1 Code: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <55> 50 e8 00 00 00 00 58 48 2d 07 10 40 00 48 8b e8 58 e9 68 02 RIP [<ffffc20011090c00>] 0xffffc20011090c00 RSP <ffff88012f6f9e68> CR2: ffffc20011090c00 Kernel panic - not syncing: Fatal exception Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | [WATCHDOG] iTCO_wdt: add PCI ID's for ICH9 & ICH10 chipsetsWim Van Sebroeck2008-11-211-45/+73
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the following I/O controller hubs: ICH7DH, ICH9M, ICH9M-E, ICH10, ICH10R, ICH10D and ICH10DO. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | [WATCHDOG] iTCO_wdt : correct status clearingWim Van Sebroeck2008-11-211-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The iTCO_wdt code was not clearing the correct bits. It now clears the timeout status bit and then the SECOND_TO_STS bit and then the BOOT_STS bit. Note: we should first clear the SECOND_TO_STS bit before clearing the BOOT_STS bit. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | [WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboardsWim Van Sebroeck2008-11-212-40/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bugzilla #9868: On Intel motherboards with the ICH9 based I/O controllers (Like DP35DP and DG33FB) the iTCO timer counts but it doesn't reboot the system after the counter expires. This patch fixes this by moving the enabling & disabling of the TCO_EN bit in the SMI_EN register into the start and stop code. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | [WATCHDOG] fix mtx1_wdt compilation failureFlorian Fainelli2008-11-211-0/+4
| |/ | | | | | | | | | | | | | | | | Using spin_lock_irqsave with a local variable called flags without declaring is a bad idea, fix this by declaring it. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | Merge branch 's3c-moves2' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King2008-11-291-1/+1
|\ \
| * \ Merge branch 'master' of ↵Ben Dooks2008-11-0325-44/+44
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into s3c-moves2
| * | | [ARM] S3C: Move regs-watchdog.h to arch/arm/plat-s3c/include/platBen Dooks2008-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move regs-watchdog.h to arch/arm/plat-s3c/include/plat ready to clean out the old include directories Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* | | | [ARM] Remove linux/sched.h from asm/cacheflush.h and asm/uaccess.hRussell King2008-11-291-0/+1
| |_|/ |/| | | | | | | | | | | | | | | | | ... and fix those drivers that were incorrectly relying upon that include. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge branch 'merge' of ↵Linus Torvalds2008-11-111-1/+4
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Update desktop/server defconfigs powerpc: Fix msr check in compat_sys_swapcontext powerpc: Repair device bindings documentation powerpc: Updated Freescale PPC related defconfigs powerpc: Update QE/CPM2 usb_ctlr structures for USB support powerpc/86xx: Correct SOC bus-frequency in GE Fanuc SBC610 DTS powerpc: Fix Book-E watchdog timer interval setting powerpc/fsl-booke: Fix synchronization bug w/local tlb invalidates
| * | | powerpc: Fix Book-E watchdog timer interval settingMatthias Fuchs2008-11-081-1/+4
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the setting of the Book-E watchdog timer interval setup on initialization and by ioctl(). On initialization the period bits have to be masked before setting a new period. In WDIOC_SETTIMEOUT ioctl we have to use the correct mask. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | [WATCHDOG] SAM9 watchdog - supported on all SAM9 and CAP9 processorsAndrew Victor2008-11-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SAM9 watchdog driver is usable on the whole family of AT91SAM9 and CAP9 processors. Update the configuration to indicate this and allow the driver to be selected. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | | [WATCHDOG] SAM9 watchdog - update for moved headersAndrew Victor2008-11-061-1/+1
|/ / | | | | | | | | | | | | | | | | | | | | The architecture header files were recently moved from include/asm-arm/mach-at91/ to arch/arm/mach-at91/include/mach/. The SAM9 watchdog driver still includes a header from the old location. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | [PATCH] Switch all my contributions stuff to a single common addressAlan Cox2008-10-2824-42/+43
| | | | | | | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | [WATCHDOG] pci: use pci_ioremap_bar() in drivers/watchdogArjan van de Ven2008-10-241-2/+1
|/ | | | | | | | | | | | Use the newly introduced pci_ioremap_bar() function in drivers/watchdog. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: Fix warningAlan Cox2008-10-231-1/+1
| | | | | | | | | | | This seems to have popped up after the recent merges: drivers/watchdog/w83697ug_wdt.c: In function ‘w83697ug_select_wd_register’: drivers/watchdog/w83697ug_wdt.c:105: warning: ‘return’ with a value, in function returning void Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [WATCHDOG] ib700wdt.c - fix buffer_underflow bugWim Van Sebroeck2008-10-151-1/+1
| | | | | | | | | | | | | | This fixes Bug 11399: if ibwdt_set_heartbeat(int t) is called with value 30 then the check "if ((t < 0) || (t > 30))" in ibwdt_set_heartbeat is not going to fail because t == 30, but in the loop, the check wd_times[i] > t is never going to be true because none of the wd_times are greater than the value of t (i.e. 30). So we are exiting the loop with i == -1 and therefore setting wd_margin to -1 which is wrong. Reported-by: Zvonimir Rakamaric <zrakamar@cs.ubc.ca> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds2008-10-128-132/+1970
|\ | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] orion5x_wdt.c: add spinlocking [WATCHDOG] Orion: add hardware watchdog support [WATCHDOG] omap_wdt.c: cleanup a bit omap_wdt.c [WATCHDOG] omap_wdt.c: another ioremap() fix [WATCHDOG] omap_wdt.c: sync linux-omap changes [WATCHDOG] Add AT91SAM9X watchdog [WATCHDOG] Add driver for winbond w83697ug/uf watchdog feature [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/K
| * [WATCHDOG] orion5x_wdt.c: add spinlockingWim Van Sebroeck2008-10-101-6/+20
| | | | | | | | | | | | | | Add spin_locking to orion5x_wdt.c to prevent races. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * [WATCHDOG] Orion: add hardware watchdog supportSylver Bruneau2008-10-103-0/+241
| | | | | | | | | | | | | | | | | | | | This patch allows the use of the hardware watchdog in the Marvell Orion series of ARM SoCs. Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * [WATCHDOG] omap_wdt.c: cleanup a bit omap_wdt.cFelipe Balbi2008-10-101-54/+78
| | | | | | | | | | | | | | | | Trivial cleanup patch. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * [WATCHDOG] omap_wdt.c: another ioremap() fixFelipe Balbi2008-10-101-21/+29
| | | | | | | | | | | | | | | | | | convert to use ioremap() and __raw_{read/write} friends. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * [WATCHDOG] omap_wdt.c: sync linux-omap changesFelipe Balbi2008-10-102-121/+190
| | | | | | | | | | | | | | | | | | | | | | | | These are changes that have been sitting in linux-omap and were never sent upstream. Hopefully, it'll never happen again at least for this driver. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * [WATCHDOG] Add AT91SAM9X watchdogRenaud CERRATO2008-10-103-0/+336
| | | | | | | | | | | | | | | | Add a driver for the watchdog timer embedded into AT91SAM9X chips. Signed-off-by: Renaud Cerrato <r.cerrato@til-technologies.fr> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * [WATCHDOG] Add driver for winbond w83697ug/uf watchdog featureFlemming Frandsen2008-10-103-0/+408
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adapted the w83627hf_wdt.c driver to work with the w83697ug/uf chip, found on MSI Fuzzy CX700 boards. The method used is taken directly from the winbond datasheet and surprisingly it differs slightly from all the other winbond watchdogs. So far it has only been tested on the CX700 board that I have, but it seems to work nicely. Signed-off-by: Flemming Frandsen <ff@nrvissing.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/KOliver Schuster2008-10-103-0/+738
| | | | | | | | | | | | | | | | | | Add it87xx watchdog driver IT8716 IT8718 IT8726 IT8712-J IT8712-K Signed-off-by: Oliver Schuster <olivers137@aol.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | Merge branch 'master' of ↵David S. Miller2008-10-117-22/+20
|\ \ | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: sound/core/memalloc.c
| * \ Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2008-10-111-3/+1
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
| | * Merge branch 'ptebits' into develRussell King2008-10-0910-235/+714
| | |\ | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/Kconfig
| | * | [ARM] cputype: separate definitions, use themRussell King2008-09-011-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add asm/cputype.h, moving functions and definitions from asm/system.h there. Convert all users of 'processor_id' to the more efficient read_cpuid_id() function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | [WATCHDOG] unlocked_ioctl changesWim Van Sebroeck2008-09-234-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix some drivers so that they use the unlocked_ioctl call. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | | [WATCHDOG] wdt285: fix sparse warningsBen Dooks2008-09-231-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The wdt285.c watchdog driver is producing a number of sparse errors due to missing __user attributes to calls to put_user and copy_to_user, as well as in the prototype of watchdog_write. wdt285.c:144:21: warning: incorrect type in argument 1 (different address spaces) wdt285.c:144:21: expected void [noderef] <asn:1>*to wdt285.c:144:21: got void *<noident> wdt285.c:150:9: warning: incorrect type in initializer (different address spaces) wdt285.c:150:9: expected int const [noderef] <asn:1>*register __p wdt285.c:150:9: got int *<noident> wdt285.c:159:9: warning: incorrect type in initializer (different address spaces) wdt285.c:159:9: expected int const [noderef] <asn:1>*register __p wdt285.c:159:9: got int *<noident> wdt285.c:174:9: warning: incorrect type in initializer (different address spaces) wdt285.c:174:9: expected int const [noderef] <asn:1>*register __p wdt285.c:174:9: got int *<noident> wdt285.c:183:12: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) wdt285.c:183:12: expected int ( *write )( ... ) wdt285.c:183:12: got int ( static [toplevel] *<noident> )( ... ) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | [WATCHDOG] ibmasr: remove unnecessary spin_unlock()Akinobu Mita2008-09-231-1/+0
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | __asr_toggle() is always called with asr_lock held. But there is unnecessary spin_unlock() call in __asr_toggle(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Andrey Panin <pazke@donpac.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | | Merge branch 'master' of ↵David S. Miller2008-09-1610-235/+714
|\ \ \ | |/ / | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 Conflicts: arch/sparc64/kernel/pci_psycho.c
OpenPOWER on IntegriCloud