summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog
Commit message (Collapse)AuthorAgeFilesLines
* watchdog: w83627hf: Use helper functions to access superio registersGuenter Roeck2013-11-181-56/+76
| | | | | | | | | | | Use helper functions named similar to other drivers to access superio registers. Request memory region only when needed, and use request_muxed_region(). This lets other devices (hwmon, gpio) use the same region. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: w83627hf: Enable watchdog device only if not already enabledGuenter Roeck2013-11-181-1/+3
| | | | | | | | | | There is no need to enable the watchdog device if it is already enabled. Also, when enabling the watchdog device, only set the watchdog device enable bit and do not touch other bits; depending on the chip type, those bits may enable other functionality. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: w83627hf: Enable watchdog only onceGuenter Roeck2013-11-181-18/+17
| | | | | | | | It is unnecessary to enable the logical device and WDT0 each time the watchdog is accessed. Do it only once during initialization. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: w83627hf: Convert to watchdog infrastructureGuenter Roeck2013-11-182-168/+48
| | | | | Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: omap_wdt: raw read and write endian fixVictor Kamensky2013-11-171-18/+18
| | | | | | | | | | | | | | | | | All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: sirf: don't depend on dummy value of CLOCK_TICK_RATEUwe Kleine-König2013-11-171-2/+4
| | | | | | | | | | | | | As CSR SiRF is converted to multi platform CLOCK_TICK_RATE is a dummy value that seems to match the right value is used. (arch/arm/mach-prima2/include/mach/timex.h which defined CLOCK_TICK_RATE to 1000000 was removed in commit cf82e0e (ARM: sirf: enable multiplatform support); marco used the same file.) To not depend on that dummy value use a local #define instead. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: pcwd_usb: overflow in usb_pcwd_send_command()Dan Carpenter2013-11-171-2/+2
| | | | | | | | | | We changed "buf" from being an array of 6 chars to being a pointer this sizeof(buf) needs to be updated as well. Fixes: 2ddb8089a7e5 ('watchdog: pcwd_usb: Use allocated buffer for usb_control_msg') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: rt2880_wdt: fix return value check in rt288x_wdt_probe()Wei Yongjun2013-11-171-1/+1
| | | | | | | | | In case of error, the function devm_request_and_ioremap() returns NULL pointer not ERR_PTR(). Fix it by using devm_ioremap_resource() instead of devm_request_and_ioremap(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: watchdog_core: Fix a trivial typoSachin Kamat2013-11-171-1/+1
| | | | | | | | Fixed a trivial typo. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: dw: Enable OF support for DW watchdog timerDinh Nguyen2013-11-171-0/+10
| | | | | | | | | | | | | | | | | | Add device tree support to the DW watchdog timer. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-watchdog@vger.kernel.org
* watchdog: Get rid of MODULE_ALIAS_MISCDEV statementsJean Delvare2013-11-1787-112/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I just can't find any value in MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) and MODULE_ALIAS_MISCDEV(TEMP_MINOR) statements. Either the device is enumerated and the driver already has a module alias (e.g. PCI, USB etc.) that will get the right driver loaded automatically. Or the device is not enumerated and loading its driver will lead to more or less intrusive hardware poking. Such hardware poking should be limited to a bare minimum, so the user should really decide which drivers should be tried and in what order. Trying them all in arbitrary order can't do any good. On top of that, loading that many drivers at once bloats the kernel log. Also many drivers will stay loaded afterward, bloating the output of "lsmod" and wasting memory. Some modules (cs5535_mfgpt which gets loaded as a dependency) can't even be unloaded! If defining char-major-10-130 is needed then it should happen in user-space. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk> Cc: Jim Cromie <jim.cromie@gmail.com>
* watchdog: ts72xx_wdt: Propagate return value from timeout_to_regvalGuenter Roeck2013-11-171-1/+1
| | | | | | | timeout_to_regval() returns a valid error code. Might as well use it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: pcwd_usb: Use allocated buffer for usb_control_msgGuenter Roeck2013-11-171-1/+7
| | | | | | | | | | | | | usb_control_msg() must use a dma-capable buffer. This fixes the following error reported by smatch: drivers/watchdog/pcwd_usb.c:257 usb_pcwd_send_command() error: doing dma on the stack (buf) Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: sp805_wdt: Remove unnecessary amba_set_drvdata()Michal Simek2013-11-171-1/+0
| | | | | | | | | | | | | Driver core clears the driver data to NULL after device_release or on probe failure, so just remove it from here. Driver core change: "device-core: Ensure drvdata = NULL when no driver is bound" (sha1: 0998d0631001288a5974afc0b2a5f568bcdecb4d) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVIXianglong Du2013-11-173-0/+234
| | | | | | | | | | | | | | | On CSR SiRFprimaII and SiRFatlasVI, the 6th timer can act as a watchdog timer when the Watchdog mode is enabled. watchdog occur when TIMER watchdog counter matches the value software pre-set, when this event occurs, the effect is the same as the system software reset. Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Romain Izard <romain.izard.pro@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: Remove redundant of_match_ptrSachin Kamat2013-11-173-3/+3
| | | | | | | | | | | | | | | | | | | | | | of_match_ptr() is a macro used to avoid undefined reference error if CONFIG_OF is used to selectively compile in or out the data structure. It is defined as follows: #ifdef CONFIG_OF #define of_match_ptr(ptr) ptr #else #define of_match_ptr(ptr) NULL #endif In the case of this series, none of the drivers use CONFIG_OF macro to compile out the data structure (i.e., the data structure is always defined). Hence the use of of_match_ptr() does not make any sense. Thus removing it to make the code look simpler for readability. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: ts72xx_wdt: cleanup return codes in ioctlDan Carpenter2013-11-171-20/+16
| | | | | | | | | | | | | | | | | | There seems to be some confusion here which functions return positive numbers and which return negative error codes. copy_to_user() returns the number of bytes remaining to be copied but we want to return -EFAULT. The rest is just clean up. get_user() actually returns zero on success and -EFAULT on error so we can preserve the error code. The timeout_to_regval() function returns -EINVAL on failure, but we can propogate that back instead of hardcoding -EINVAL ourselves. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> --
* watchdog: add ralink watchdog driverJohn Crispin2013-11-173-0/+216
| | | | | | | | | | | | Add a driver for the watchdog timer found on Ralink SoC Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org
* watchdog: Add MOXA ART watchdog driverJonas Jensen2013-11-173-0/+176
| | | | | | | | | | | | | This patch adds a watchdog driver for the main hardware watchdog timer found on MOXA ART SoCs. The MOXA ART SoC provides one writable timer register, restarting the hardware once it reaches zero. The register is auto decremented every APB clock cycle. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: kempld_wdt: Add __user annotationJingoo Han2013-11-171-2/+2
| | | | | | | | | | | | | | | Added __user annotation to fix the following sparse warnings. Also, it makes 'kempld_prescaler' static because it is used only in this file. drivers/watchdog/kempld_wdt.c:70:11: warning: symbol 'kempld_prescaler' was not declared. Should it be static? drivers/watchdog/kempld_wdt.c:364:23: warning: incorrect type in initializer (different address spaces) drivers/watchdog/kempld_wdt.c:364:23: expected int const [noderef] <asn:1>*register __p drivers/watchdog/kempld_wdt.c:364:23: got int *<noident> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: dw_wdt: Add __user annotationJingoo Han2013-11-171-2/+2
| | | | | | | | | | | | | | | | Added __user annotation to fix the following sparse warnings. drivers/watchdog/dw_wdt.c:206:38: warning: incorrect type in argument 1 (different address spaces) drivers/watchdog/dw_wdt.c:206:38: expected void [noderef] <asn:1>*to drivers/watchdog/dw_wdt.c:206:38: got struct watchdog_info *<noident> drivers/watchdog/dw_wdt.c:211:24: warning: incorrect type in initializer (different address spaces) drivers/watchdog/dw_wdt.c:211:24: expected int const [noderef] <asn:1>*register __p drivers/watchdog/dw_wdt.c:211:24: got int *<noident> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: use dev_get_platdata()Jingoo Han2013-11-177-12/+10
| | | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: imx2_wdt: expose module alias for loading from device-treeNiels de Vos2013-11-171-0/+1
| | | | | | | | | Enable auto loading by udev when imx2_wdt is compiled as a module. Signed-off-by: Niels de Vos <ndevos@redhat.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: dw_wdt: use clk_prepare_enable and clk_disable_unprepareHeiko Stübner2013-11-171-5/+5
| | | | | | | | | This is necessary to make the driver work with platforms using the common clock framework. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: dw_wdt: convert to SIMPLE_DEV_PM_OPSHeiko Stübner2013-11-171-8/+3
| | | | | | | | | | The dw_wdt only provides PM_SLEEP operations, so convert the driver to use SIMPLE_DEV_PM_OPS instead of populating the struct manually. This has the added effect of simplifying the CONFIG_PM ifdefs. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds2013-11-123-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
| * powerpc: add missing explicit OF includes for ppcRob Herring2013-11-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b5b4bb3f6a11f9 (of: only include prom.h on sparc) removed implicit includes of of_*.h headers by powerpc's prom.h. Some components were missed in initial clean-up patch, so add the necessary includes to fix powerpc builds. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Tejun Heo <tj@kernel.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-ide@vger.kernel.org Cc: linux-crypto@vger.kernel.org
| * Merge remote-tracking branch 'grant/devicetree/next' into for-nextRob Herring2013-11-074-4/+11
| |\
| * | drivers: clean-up prom.h implicit includesRob Herring2013-10-092-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Powerpc is a mess of implicit includes by prom.h. Add the necessary explicit includes to drivers in preparation of prom.h cleanup. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org>
* | | Merge tag 'h8300-for-linus' of ↵Linus Torvalds2013-11-122-4/+0
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull h8300 platform removal from Guenter Roeck: "The patch series has been in -next for more than one relase cycle. I did get a number of Acks, and no objections. H8/300 has been dead for several years, the kernel for it has not compiled for ages, and recent versions of gcc for it are broken. Remove support for it" * tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: CREDITS: Add Yoshinori Sato for h8300 fs/minix: Drop dependency on H8300 Drop remaining references to H8/300 architecture Drop MAINTAINERS entry for H8/300 watchdog: Drop references to H8300 architecture net/ethernet: Drop H8/300 Ethernet driver net/ethernet: smsc9194: Drop conditional code for H8/300 ide: Drop H8/300 driver Drop support for Renesas H8/300 (h8300) architecture
| * | | watchdog: Drop references to H8300 architectureGuenter Roeck2013-09-162-4/+0
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | Architecture is gone. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | intel_mid: Renamed *mrst* to *intel_mid*Kuppuswamy Sathyanarayanan2013-10-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mrst is used as common name to represent all intel_mid type soc's. But moorsetwon is just one of the intel_mid soc. So renamed them to use intel_mid. This patch mainly renames the variables and related functions that uses *mrst* prefix with *intel_mid*. To ensure that there are no functional changes, I have compared the objdump of related files before and after rename and found the only difference is symbol and name changes. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: http://lkml.kernel.org/r/1382049336-21316-6-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* | | intel_mid: Renamed *mrst* to *intel_mid*Kuppuswamy Sathyanarayanan2013-10-171-1/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following files contains code that is common to all intel mid soc's. So renamed them as below. mrst/mrst.c -> intel-mid/intel-mid.c mrst/vrtc.c -> intel-mid/intel_mid_vrtc.c mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c pci/mrst.c -> pci/intel_mid_pci.c Also, renamed the corresponding header files and made changes to the driver files that included these header files. To ensure that there are no functional changes, I have compared the objdump of renamed files before and after rename and found that the only difference is file name change. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: http://lkml.kernel.org/r/1382049336-21316-4-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* | watchdog: sunxi: Fix section mismatchMaxime Ripard2013-10-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver has a section mismatch, for probe and remove functions, leading to the following warning during the compilation. WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in reference from the variable sunxi_wdt_driver to the function .init.text:sunxi_wdt_probe() The variable sunxi_wdt_driver references the function __init sunxi_wdt_probe() Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | watchdog: kempld_wdt: Fix bit mask definitionJingoo Han2013-10-131-1/+1
| | | | | | | | | | | | | | | | | | | | STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)' handles [9:8] bits. Thus, it should be fixed in order to handle [5:4] bits. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | watchdog: ts72xx_wdt: locking bug in ioctlDan Carpenter2013-10-131-1/+2
| | | | | | | | | | | | | | | | | | Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a interruptible deadlock. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | watchdog: hpwdt: Patch to ignore auxilary iLO devicesMingarelli, Thomas2013-10-101-0/+6
|/ | | | | | | | | | | This patch is to prevent hpwdt from loading on any auxilary iLO devices defined after the initial (or main) iLO device. All auxilary iLO devices will have a subsystem device ID set to 0x1979 in order for hpwdt to differentiate between the two types. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Tested-by: Lisa Mitchell <lisa.mitchell@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2013-09-127-119/+377
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull watchdog updates from Wim Van Sebroeck: - New watchdog driver for Allwinner A10/A13 - some devm_ioremap_resource simplifications - a s3c2410_wdt change that removes the global variables * git://www.linux-watchdog.org/linux-watchdog: watchdog: s3c2410_wdt: simplify use of devm_ioremap_resource watchdog: simplify platform_get_resource_byname/devm_ioremap_resource watchdog: ts72xx_wdt: simplify use of devm_ioremap_resource watchdog: nuc900_wdt.c: simplify use of devm_ioremap_resource watchdog: sunxi: New watchdog driver for Allwinner A10/A13 watchdog: s3c2410_wdt: remove the global variables
| * watchdog: s3c2410_wdt: simplify use of devm_ioremap_resourceJulia Lawall2013-09-101-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: simplify platform_get_resource_byname/devm_ioremap_resourceJulia Lawall2013-09-101-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unneeded error handling on the result of a call to platform_get_resource_byname when the value is passed to devm_ioremap_resource. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,e,e1; expression ret != 0; identifier l; @@ res = platform_get_resource_byname(...); - if (res == NULL) { ... \(goto l;\|return ret;\) } e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: ts72xx_wdt: simplify use of devm_ioremap_resourceJulia Lawall2013-09-101-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: nuc900_wdt.c: simplify use of devm_ioremap_resourceJulia Lawall2013-09-101-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: sunxi: New watchdog driver for Allwinner A10/A13Carlo Caione2013-09-103-0/+248
| | | | | | | | | | | | | | | | | | This patch adds the driver for the watchdog found in the Allwinner A10 and A13 SoCs. It has DT-support and uses the new watchdog framework. Signed-off-by: Carlo Caione <carlo.caione@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: s3c2410_wdt: remove the global variablesLeela Krishna Amudala2013-09-101-94/+128
| | | | | | | | | | | | | | | | | | | | This patch removes the global variables in the driver file and group them into a structure. Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | lto, watchdog/hpwdt.c: make assembler label globalAndi Kleen2013-09-111-2/+4
|/ | | | | | | | | | | We cannot assume that the inline assembler code always ends up in the same file as the original C file. So make any assembler labels that are called with "extern" by C global Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2013-07-132-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
| * Merge branch '3.10-fixes' into mips-for-linux-nextRalf Baechle2013-07-121-1/+1
| |\ | | | | | | | | | | | | This that should have been fixed but weren't, way to much, intrusive and late.
| | * WATCHDOG: sb_wdog: Fix 32 bit build failureRalf Baechle2013-06-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following linking problem: drivers/watchdog/sb_wdog.c:211: undefined reference to `__udivdi3' This results from reading a 64 bit register, then dividing the value by 1000000. For 32 bit kernels gcc will use the helper function __udivdi3 from libgcc which the kernel intentionally doesn't provide. In the read registerbits 23..63 are always zero and only bits 0..22 are signficant. So a simple cast to truncate the read value to 32 bits fixes the issue. Reported and initial patch by Markos Chandras <markos.chandras@imgtec.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Markos Chandras <markos.chandras@imgtec.com>
| * | MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOCDavid Daney2013-06-101-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CAVIUM_OCTEON_SOC most place we used to use CPU_CAVIUM_OCTEON. This allows us to CPU_CAVIUM_OCTEON in places where we have no OCTEON SOC. Remove CAVIUM_OCTEON_SIMULATOR as it doesn't really do anything, we can get the same configuration with CAVIUM_OCTEON_SOC. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-edac@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: netdev@vger.kernel.org Cc: spi-devel-general@lists.sourceforge.net Cc: devel@driverdev.osuosl.org Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Patchwork: https://patchwork.linux-mips.org/patch/5295/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | watchdog: hpwdt: Add check for UEFI bitsMingarelli, Thomas2013-07-111-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch is being created to use the UEFI bits in the type 219 SMBIOS record in order to decide whether or not to execute BIOS code. This is a better solution than to depend on the iCRU bit since not all future servers will use iCRU. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> ---- drivers/watchdog/hpwdt.c | 9 ++++++--- 1 files changed, 6 insertions(+), 3 deletions(-)
OpenPOWER on IntegriCloud