summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog
Commit message (Collapse)AuthorAgeFilesLines
* watchdog: Enable NXP LPC32XX support in Kconfig (resend)Kevin Wells2010-09-151-3/+3
| | | | | | | | | | The NXP LPC32XX processor use the same watchdog as the Philips PNX4008 processor. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: ts72xx_wdt: disable watchdog at probeMika Westerberg2010-09-151-0/+3
| | | | | | | | | | Since it may be already enabled by bootloader or some other utility. This patch makes sure that the watchdog is disabled before any userspace daemon opens the device. It is also required by the watchdog API. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: sb_wdog: release irq and reboot notifier in error path and ↵Akinobu Mita2010-09-151-3/+9
| | | | | | | | | | | | | module_exit() irq and reboot notifier are acquired in module_init() but never released. They should be released correctly, otherwise reloading the module or error during module_init() will cause a problem. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Andrew Sharp <andy.sharp@lsi.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: hpwdt (12/12): Make NMI decoding a compile-time optiondann frazier2010-08-132-7/+37
| | | | | | | | | | | hpwdt is quite functional without the NMI decoding feature. This change lets users disable the NMI portion at compile-time via the new HPWDT_NMI_DECODING config option. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: hpwdt (11/12): move NMI-decoding init and exit to seperate functionsdann frazier2010-08-131-55/+69
| | | | | | | | | | | | Move NMI-decoding initialisation and exit code to seperate functions so that we can ifdef-out parts of it in the future. Also, this is for a device, so let's use dev_info instead of printk. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: hpwdt (10/12): Use "decoding" instead of "sourcing"dann frazier2010-08-131-10/+10
| | | | | | | | | | | The term "decoding" more clearly explains what hpwdt is doing. It isn't just finding the source of the interrupt, but rather aids in decoding what the interrupt means. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: hpwdt (9/12): hpwdt_pretimeout reorganizationdann frazier2010-08-131-17/+19
| | | | | | | | | | Reorganize this function to remove excess indentation and highlight the single return code. (No functional change). Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: hpwdt (8/12): implement WDIOC_GETTIMELEFTdann frazier2010-08-131-0/+9
| | | | | | | | | Let applications check the amount of time left before the watchdog will fire. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: hpwdt (7/12): allow full range of timer values supported by hardwaredann frazier2010-08-131-2/+3
| | | | | | | | | | The hpwdt timer is a 16 bit value with 128ms resolution. Let applications use this entire range. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: hpwdt (6/12): Introduce SECS_TO_TICKS() macrodann frazier2010-08-131-2/+3
| | | | | | | | | Define a macro to convert from seconds to timer ticks. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: hpwdt (5/12): Make x86 assembly ifdef guard more strictdann frazier2010-08-131-6/+5
| | | | | | | | | | | The 32-bit assembly is guarded by an #ifndef CONFIG_X86_64. Kconfig prevents us from building this driver on !X86, so that happens to suffice - but we should really lock it down to #ifdef CONFIG_X86_32. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: hpwdt (4/12): Despecificate driver from iLO2dann frazier2010-08-132-8/+8
| | | | | | | | | | | | This driver supports both iLO2 and iLO3, but our user-visible strings currently only reference iLO2. Let's just call it "iLO2+" to avoid having to update strings for each iLO generation. This driver doesn't support iLO ASICs prior to iLO2, but that is sufficiently explained in Kconfig. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: hpwdt (3/12): Group NMI sourcing specific items togetherdann frazier2010-08-131-25/+24
| | | | | | | | | | | | | | | * Group together includes specific to NMI sourcing * Group defines only used by NMI sourcing together * Group declarations specific to NMI sourcing together This gives a clean seperation of watchdog specific items and NMI sourcing specific items (which is needed for making it possible to build hpwdt without the NMI functionality). Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: hpwdt (2/12): Group options that affect watchdog behavior togetherdann frazier2010-08-131-3/+3
| | | | | | | | | Reorganization only. Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: hpwdt (1/12): clean-up include-files.dann frazier2010-08-131-10/+2
| | | | | | | | | | | * remove unnecessary includes * We use a spinlock, but lacked the include * We need bitops.h for test_and_set_bit/clear_bit Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2010-08-124-7/+7
|\ | | | | | | | | | | | | * 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
| * of/device: Replace struct of_device with struct platform_deviceGrant Likely2010-08-064-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
* | watchdog: hpwdt: formatting of pointers in printk()Kulikov Vasiliy2010-08-081-2/+2
| | | | | | | | | | | | | | | | Use %p instead of %08x in printk(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | watchdog: Adding support for ARM Primecell SP805 WatchdogViresh KUMAR2010-08-083-0/+395
| | | | | | | | | | | | | | | | | | Technical Reference Manual can be found at: http://infocenter.arm.com/help/topic/com.arm.doc.ddi0270b/DDI0270.pdf Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FGGiel van Schijndel2010-08-083-0/+780
| | | | | | | | | | | | | | | | | | Add a new watchdog driver for the Fintek F71808E and F71882FG Super I/O controllers. Signed-off-by: Giel van Schijndel <me@mortis.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | watchdog: sch311x_wdt.c: set parent before registeriing the misc device in ↵Wim Van Sebroeck2010-08-081-2/+2
| | | | | | | | | | | | | | | | | | | | probe() function Set the paranet of the misc_device before we register the misc_device. Reported-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Wim Van sebroeck <wim@iguana.be>
* | watchdog: wdt_pci.c: move ids to pci_ids.hH Hartley Sweeten2010-08-081-14/+1
| | | | | | | | | | | | | | | | | | Move the VENDOR/DEVICE ids to pci_ids.h. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | watchdog: s3c2410_wdt - Fix removing of platform deviceWim Van Sebroeck2010-08-081-8/+9
|/ | | | | | | | | | | | | | When removing the watchdog platform device, we need to disable the access to userspace first. It makes no sense to remove the drivers clock, irq's, ... and then disable userspace access. the order of removal has also been changed so that it is the reverse of probing (this way the clock is also disabled sooner). Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2010-08-052-5/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits) of/platform: Register of_platform_drivers with an "of:" prefix of/address: Clean up function declarations of/spi: call of_register_spi_devices() from spi core code of: Provide default of_node_to_nid() implementation. of/device: Make of_device_make_bus_id() usable by other code. of/irq: Fix endian issues in parsing interrupt specifiers of: Fix phandle endian issues of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string of: remove of_default_bus_ids of: make of_find_device_by_node generic microblaze: remove references to of_device and to_of_device sparc: remove references to of_device and to_of_device powerpc: remove references to of_device and to_of_device of/device: Replace of_device with platform_device in includes and core code of/device: Protect against binding of_platform_drivers to non-OF devices of: remove asm/of_device.h of: remove asm/of_platform.h of/platform: remove all of_bus_type and of_platform_bus_type references of: Merge of_platform_bus_type with platform_bus_type drivercore/of: Add OF style matching to platform bus ... Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just some obj-y removals by the devicetree branch, while the microblaze updates added a new file.
| * of/platform: remove all of_bus_type and of_platform_bus_type referencesGrant Likely2010-07-242-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both of_bus_type and of_platform_bus_type are just #define aliases for the platform bus. This patch removes all references to them and switches to the of_register_platform_driver()/of_unregister_platform_driver() API for registering. Subsequent patches will convert each user of of_register_platform_driver() into plain platform_drivers without the of_platform_driver shim. At which point the of_register_platform_driver()/of_unregister_platform_driver() functions can be removed. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net>
| * Merge commit 'v2.6.35-rc6' into devicetree/nextGrant Likely2010-07-242-7/+10
| |\ | | | | | | | | | | | | Conflicts: arch/sparc/kernel/prom_64.c
| * | sparc/of: Move of_device fields into struct pdev_archdataGrant Likely2010-06-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves SPARC architecture specific data members out of struct of_device and into the pdev_archdata structure. The reason for this change is to unify the struct of_device definition amongst all the architectures. It also remvoes the .sysdata, .slot, .portid and .clock_freq properties because they aren't actually used by anything. A subsequent patch will replace struct of_device entirely with struct platform_device and the of_platform support code will share common routines with the platform bus (but the bus instances themselves can remain separate). This patch also adds 'struct resources *resource' and num_resources to match the fields defined in struct platform_device. After this change, 'struct platform_device' can be used as a drop-in replacement for 'struct of_platform'. This change is in preparation for merging the of_platform_bus_type with the platform_bus_type. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
* | | WATCHDOG: Add watchdog driver for OCTEON SOCsDavid Daney2010-08-054-0/+829
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OCTEON is a MIPS64 based SOC family with an on chip watchdog unit. The driver is split into two source files one for the C code and one for assembly. Assembly is needed to handle the NMI and then print the machine state before the reboot is triggered. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Marc Zyngier <maz@misterjones.org> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Sam Ravnborg <sam@ravnborg.org> To: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org, Patchwork: https://patchwork.linux-mips.org/patch/1503/ Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 drivers/watchdog/octeon-wdt-main.c create mode 100644 drivers/watchdog/octeon-wdt-nmi.S
* | watchdog: at32ap700x_wdt: register misc device last in probe() functionHans-Christian Egtvedt2010-06-171-6/+10
| | | | | | | | | | | | | | | | | | | | | | This patch reworks the probe() function in the at32ap700x_wdt driver, this to make sure the miscdev is properly initialized and the driver is ready to be accessed. Reported-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Wim Van sebroeck <wim@iguana.be>
* | watchdog: [PATCH 3/3] imx2_wdt: fix section mismatchBaruch Siach2010-06-131-1/+0
|/ | | | | | | | Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [PATCH 2/11] drivers/watchdog: Eliminate a NULL pointer dereferenceJulia Lawall2010-06-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the point of the call to dev_err, wm8350 is NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* of/watchdog: gef_wdt.c: fix build breakageAnatolij Gustschin2010-06-021-1/+1
| | | | | | | | Fixes build error caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* watchdog: Fix build failure with OF changesMichael Guntsche2010-06-021-1/+1
| | | | | | | | | commit 61c7a080a5a061c976988fd4b844dfb468dda255 ( of: Always use 'struct device.of_node' to get device node pointer.) missed drivers/watchdog/mpc8xxx_wdt.c. This patch fixes it Signed-off-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* mfd: Change rdc321x resources flags to IORESOURCE_IOFlorian Fainelli2010-05-281-1/+1
| | | | | | | | | | | | The rdc321x southbridge PCI device has no MEM PCI resources that we could pass to mfd_add_devices. Since 33254dd5, mfd_add_device checks for the mem_base argument that we set to NULL. Changing the resources passed to our MFD cells from IORESOURCE_MEM to IORESOURCE_IO fixes that. Since we use those resources as offsets to the PCI configuration space base address of the southbridge device this is also more adequate. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* watchdog: Convert rdc321x_wdt to use southbridge pci deviceFlorian Fainelli2010-05-281-13/+40
| | | | | | | | | | | | The RDC321x MFD southbridge driver will pass a reference to the southbridge PCI device which should be used by the watchdog driver for its operations. This patch converts the watchdog driver to use the pci_dev pointer and make use of the base register resource which is passed along with the platform device. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* watchdog: Driver for the watchdog timer on Freescale IMX2 (and later) ↵Wolfram Sang2010-05-253-0/+371
| | | | | | | | | | | | | processors. This is the driver for the hardware watchdog on the Freescale IMX2 and later processors. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: s3c2410_wdt - Fix on handling of the request_mem_region failBanajit Goswami2010-05-251-2/+1
| | | | | | | | | | | If the request for wdt_mem region fails, this patch modifies the driver such that, it does not try to release the wdt_mem region on exit. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: s3c2410_wdt - Add extra option to include watchdog for Samsung SoCsBanajit Goswami2010-05-251-4/+10
| | | | | | | | | | | | This patch adds HAVE_S3C2410_WATCHDOG to control inclusion of watchdog driver for Samsung SoCs. This option will help to include the driver only for the necessary machines and not for all for any given arch. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* iTCO_wdt: fix TCO V1 timeout values and limitsPádraig Brady2010-05-252-19/+21
| | | | | | | | | | | | | | For TCO V1 devices the programmed timeout was twice too long because the fact that the TCO V1 timer needs to count down twice before triggering the watchdog, wasn't accounted for. Also the timeout values in the module description and error message were clarified. And the _STS registers are 16 bit instead of 8 bit. Signed-off-by: Pádraig Brady <P@draigBrady.com> Tested-by: Simon Kagstrom <simon.kagstrom@netinsight.se> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: twl4030_wdt: Disable watchdog during probingAmeya Palande2010-05-251-0/+2
| | | | | | | | | | If we are not able to register then it is better to have watchdog in disabled state than noticing a system reboot. Signed-off-by: Ameya Palande <ameya.palande@nokia.com> Acked-By: Timo Kokkonen <timo.t.kokkonen@nokia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: update/improve/consolidate watchdog driverRandy Dunlap2010-05-252-2/+1
| | | | | | | | | | | | | Move the limited watchdog driver help from kernel-parameters.txt to Documentation/watchdog/watchdog-parameters.txt and add info to it for all watchdog drivers except the ones that have driver-specific files already. Correct minor comments and MODULE_PARM_DESC() text in 2 places. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: booke_wdt: fix ioctl status flagsWim Van Sebroeck2010-05-251-3/+3
| | | | | | | | The WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS ioctl calls return the WDIOF_* flags and nothing else. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: fix several MODULE_PARM_DESC stringsRandy Dunlap2010-05-256-13/+19
| | | | | | | | | | | | | | | | Fix MODULE_PARM_DESC() strings in several watchdog drivers. Some are simple as add a parenthesis. Others are problems from __stringify() being used on a variable name instead of a macro name, so the variable name is produced in the string instead of its build-time value. In these cases, create a macro for the value so that the module param description string is useful. Only pc87413_wdt has been built (due to toolchains). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: bfin: use new common Blackfin watchdog headerMike Frysinger2010-05-251-18/+1
| | | | | | | | use new common Blackfin watchdog header Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* Merge remote branch 'origin' into secretlab/next-devicetreeGrant Likely2010-05-227-25/+26
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * USB: rename usb_buffer_alloc() and usb_buffer_free() usersDaniel Mack2010-05-201-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For more clearance what the functions actually do, usb_buffer_alloc() is renamed to usb_alloc_coherent() usb_buffer_free() is renamed to usb_free_coherent() They should only be used in code which really needs DMA coherency. All call sites have been changed accordingly, except for staging drivers. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Pedro Ribeiro <pedrib@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * ARM: 6126/1: ARM mpcore_wdt: fix build failure and other fixesSrinidhi Kasagar2010-05-122-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | This fixes the build failures seen when building mpcore_wdt and it also removes the nonexistent ARM_MPCORE_PLATFORM dependency, instead make it dependent on HAVE_ARM_TWD. Also this fixes spinlock usage appropriately. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * watchdog: ep93xx_wdt.c fix default timout value in MODULE_PARM_DESC string.Wim Van Sebroeck2010-05-031-1/+1
| | | | | | | | | | | | | | | | The WATCHDOG_TIMEOUT macro does not exist. The default timeout value is WDT_TIMEOUT. Fix the MODULE_PARM_DESC so that the code can compile again. reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: booke_wdt: fix build - unconstify watchdog_infoAnton Vorontsov2010-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 42747d712de56cf2087b702d2ad90af114c53138 ("[WATCHDOG] watchdog_info constify") introduced the following build failure: CC booke_wdt.o booke_wdt.c: In function 'booke_wdt_init': booke_wdt.c:220: error: assignment of read-only variable 'ident' Fix this by removing 'const' qualifier from watchdog_info struct. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * watchdog: sbc_fitpc2_wdt: fixed "scheduling while atomic" bug.Denis Turischev2010-04-261-5/+5
| | | | | | | | | | | | | | | | | | spinlock need to be replaced by mutex because of sleep functions inside wdt_send_data. Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
OpenPOWER on IntegriCloud