summaryrefslogtreecommitdiffstats
path: root/drivers/video/sh_mobile_lcdcfb.c
Commit message (Collapse)AuthorAgeFilesLines
* fbdev: sh-mobile: HDMI support for SH-Mobile SoCsGuennadi Liakhovetski2010-08-041-49/+139
| | | | | | | | | | | | Some SH-Mobile SoCs have an HDMI controller and a PHY, attached to one of their LCDC interfaces. This patch adds a preliminary static support for such controllers, this means, that only the 720p mode is handled ATM. Support for more modes and a dynamic switching between them will be added by a follow up patch. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: add a parameter to LCDC driver's .display_on() callbackGuennadi Liakhovetski2010-08-041-1/+1
| | | | | | | | | | HDMI support for the sh_mobile_lcdc framebuffer driver will require a 'struct fb_info *' pointer for its .display_on() callback. While at it fix kfr2r09 framebuffer modular build. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* fbdev: sh-mobile-lcdc: fix potential Oops in SH-Mobile LCDC framebuffer driverGuennadi Liakhovetski2010-08-041-2/+4
| | | | | | | | | | sh_mobile_lcdc_setup_clocks() can perform IO, therefore it has to be called after ioremap(). Also check return code of ioremap() and use resource_size() instead of open-coding it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* fbdev: fix erroneous index in drivers/video/sh_mobile_lcdcfb.cGuennadi Liakhovetski2010-05-251-3/+3
| | | | | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: fix a number of Oopses and leaks in SH framebuffer driverGuennadi Liakhovetski2010-05-061-14/+13
| | | | | | | | Fix a number of Oopses, memory leaks and unbalanced calls on error paths in sh_mobile_lcdcfb.c. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* platform-drivers: move probe to .devinit.text in drivers/videoUwe Kleine-König2010-03-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A pointer to a probe callback is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Adrian Bunk <bunk@stusta.de> Cc: Alberto Mardegan <mardy@users.sourceforge.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andriy Skulysh <askulysh@gmail.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Chandramouli Narayanan <mouli@linux.intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Frans Pop <elendil@planet.nl> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Helge Deller <deller@gmx.de> Cc: Huang Ying <ying.huang@intel.com> Cc: Ian Molton <spyro@f2s.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Kaj-Michael Lang <milang@tal.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: linux-fbdev-devel@lists.sourceforge.net Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Magnus Damm <damm@igel.co.jp> Cc: Martin Michlmayr <tbm@cyrius.com> Cc: Matthias Kaehlcke <matthias@kaehlcke.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Pavel Machek <pavel@suse.cz> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Roel Kluin <roel.kluin@gmail.com> Cc: Roland Stigge <stigge@antcom.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vincent Sanders <vince@simtec.co.uk> Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: James Simmons <jsimmons@infradead.org> Acked-by: Peter Jones <pjones@redhat.com> Acked-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* video: sh_mobile_lcdcfb: Fix panning.Phil Edworthy2010-02-161-28/+18
| | | | | | | | | | | | Fixed SH-Mobile panning. Previously the address of the frame to be displayed was updated in the VSync end interrupt. This meant there was a minimum of 1 frame bewteen calling FBIOPAN_DISPLAY ioctl and the pan occuring. This meant that apps were not able to use the FBIO_WAITFORVSYNC ioctl to wait for the pan to complete. This patch moves the write to LDSA1R mirror reg into the pan ioctl. Tested on MS7724 board against 2.6.33-rc7 Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* video: sh_mobile_lcdcfb: Add wait for vsync.Phil Edworthy2010-02-161-1/+47
| | | | | | | | Added FBIO_WAITFORVSYNC ioctl for SH-Mobile devices. Tested on MS7724 and MigoR boards against 2.6.33-rc7. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2009-12-161-1/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (33 commits) sh: Fix test of unsigned in se7722_irq_demux() sh: mach-ecovec24: Add FSI sound support sh: mach-ecovec24: Add mt9t112 camera support sh: mach-ecovec24: Add tw9910 support sh: MSIOF/mmc_spi platform data for the Ecovec24 board sh: ms7724se: Add ak4642 support sh: Fix up FPU build for SH5 sh: Remove old early serial console code V2 sh: sh5 scif pdata (sh5-101/sh5-103) sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3) sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724) sh: sh4 scif pdata (sh7750/sh7760/sh4-202) sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720) sh: sh2a scif pdata (sh7201/sh7203/sh7206/mxg) sh: sh2 scif pdata (sh7616) sh-sci: Extend sh-sci driver with early console V2 sh: Stub in P3 ioremap support for nommu parts. sh: wire up vmallocinfo support in ioremap() implementations. sh: Make the unaligned trap handler always obey notification levels. sh: Couple kernel and user write page perm bits for CONFIG_X2TLB ...
| * sh: add a start_transfer() callback to the LCDC driverMagnus Damm2009-12-091-1/+9
| | | | | | | | | | | | | | | | | | | | | | This patch adds a ->start_transfer() callback to the driver sh_mobile_lcdcfb.c. The callback is used to program the LCDC panel in the case of one-shot mode. Needed by the LCD controller used on the KFR2R09 board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | const: constify remaining dev_pm_opsAlexey Dobriyan2009-12-151-1/+1
|/ | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* video: sh_mobile_lcdcfb: Don't attempt to map zero-length scatterlists.Paul Mundt2009-11-041-8/+24
| | | | | | | | | | | | | | | | | | | | More aggressive DMA mapping debugging has uncovered a long-standing buglet in the way that the sh_mobile_lcdcfb driver implements its deferred I/O callback. When used as a console driver the acceleration routines are called by the kernel which subsequently cause the deferred I/O work to be scheduled, resulting in the deferred I/O callback being entered without any dirty pages on the pagelist (the normal case for userspace accesses). It's also possible to get in to this situation via explicit calling of fsync() when nothing has dirtied the region. Unfortunately it's not sufficient to skip over the callback when the pagelist is empty given the console driver use case, so instead the callback has to conditionalize the work for panel updates and DMA mapping depending on whether anything is resident on the pagelist or not. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* video: sh_mobile_lcdcfb: use both register sets for display panningPhil Edworthy2009-09-151-3/+44
| | | | | | | | Switch to using both register sets - side A and side B for display panning. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* video: sh_mobile_lcdcfb: implement display panningPhil Edworthy2009-09-151-10/+66
| | | | | | Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* video: Runtime PM for SuperH Mobile LCDCMagnus Damm2009-08-231-46/+110
| | | | | | | | | | | | | | | | This patch modifies the SuperH Mobile LCDC framebuffer driver to support Runtime PM. The driver is using the functions - pm_runtime_get_sync() - pm_runtime_put_sync() to inform the bus code if the hardware is idle or not. If the hardware is idle then the bus code may call the runtime dev_pm_ops callbacks to save and restore state. pm_runtime_resume() is used to allow the driver to access the hardware from probe(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* Merge branch 'sh/stable-updates'Paul Mundt2009-08-151-0/+5
|\
| * sh: skip disabled LCDC channelsMagnus Damm2009-08-151-0/+5
| | | | | | | | | | | | | | | | | | This patch updates the SuperH Mobile LCDC driver to skip over disabled channels. Without this patch suspend-to-ram operation will crash if deferred io is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | sh: 18-bit SYS panel fix for SuperH Mobile LCDCMagnus Damm2009-08-071-1/+1
| | | | | | | | | | | | | | | | | | | | Fix the SuperH Mobile LCDC driver to make use of the full 18-bit DRD field in the LDDRDR register. Without this patch only 16-bit register access is possible. Needed by 18-bit SYS panels such as the one used on kfr2r09. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | sh: LCDC SYS bus access wait fixMagnus Damm2009-08-071-0/+3
| | | | | | | | | | | | | | | | | | | | Update the SuperH Mobile LCDC driver to wait for SYS bus to become idle after reading or writing. This is needed by the kfr2r09 board, but also fixes potential problems on other boards making use of the LCDC in a SYS configuration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| |
| \
*-. \ Merge branches 'sh/ftrace' and 'sh/stable-updates'Paul Mundt2009-07-111-16/+24
|\ \ \ | | |/
| | * video: sh_mobile_lcdcfb: Convert to framebuffer_alloc().Paul Mundt2009-07-071-16/+24
| |/ | | | | | | | | | | | | All fb_info structures need to be allocated with framebuffer_alloc() due to special initialization. Switch over to it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | video: sh_mobile_lcdcfb: depends on HAVE_CLK.Paul Mundt2009-07-071-15/+1
|/ | | | | | | | | | | This deifdefs the driver and adds an explicit HAVE_CLK dependency. Given that all SH platforms provide it, there is no reason to keep this as an ifdef. Other architectures that implement support for this driver will already have to provide clock framework support for timers and so on already, so adding this as an additional dependency is not terribly probematic. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: LCDC dcache flush for deferred ioPaul Mundt2009-07-021-8/+45
| | | | | | | | | Since writenotify on uncached vmas is unsupported in 2.6.31, live with cached framebuffer memory in the deferred io case for now and flush the dcache before forcing refresh. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Magnus damm <damm@igel.co.jp>
* video: stop sh_mobile_lcdcfb only if startedMagnus Damm2009-05-221-1/+6
| | | | | | | | | | | | | This patch fixes the LCDC driver to avoid calling the function sh_mobile_lcdc_start_stop(priv, 0) unless the same function has been called before to start the LCDC hardware. Triggered when sh_mobile_lcdcfb.c failed to probe() due to missing MSTP clocks. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds2009-03-261-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (61 commits) Dynamic debug: fix pr_fmt() build error Dynamic debug: allow simple quoting of words dynamic debug: update docs dynamic debug: combine dprintk and dynamic printk sysfs: fix some bin_vm_ops errors kobject: don't block for each kobject_uevent sysfs: only allow one scheduled removal callback per kobj Driver core: Fix device_move() vs. dpm list ordering, v2 Driver core: some cleanup on drivers/base/sys.c Driver core: implement uevent suppress in kobject vcs: hook sysfs devices into object lifetime instead of "binding" driver core: fix passing platform_data driver core: move platform_data into platform_device sysfs: don't block indefinitely for unmapped files. driver core: move knode_bus into private structure driver core: move knode_driver into private structure driver core: move klist_children into private structure driver core: create a private portion of struct device driver core: remove polling for driver_probe_done(v5) sysfs: reference sysfs_dirent from sysfs inodes ... Fixed conflicts in drivers/sh/maple/maple.c manually
| * video: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2009-03-241-1/+1
| | | | | | | | | | Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
* | video: sh_mobile_lcdcfb suspend/resume supportMagnus Damm2009-03-161-7/+59
|/ | | | | | | | | | | | | | | This patch adds suspend/resume support to the LCDC driver for SuperH Mobile - sh_mobile_lcdcfb. We simply stop hardware on suspend and start it again on resume. For RGB panels this is trivial, but for SYS panels in deferred io mode this becomes a bit more difficult - we need to wait for a frame end interrupt to make sure the clocks are balanced before stopping the actual hardware. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* video: deferred io cleanup fix for sh_mobile_lcdcfbMagnus Damm2009-03-101-4/+2
| | | | | | | | | | | | | | | | Fix deferred io cleanup patch in the sh_mobile_lcdcfb driver. If probe() fails early the sh_mobile_lcdc_stop() function will be called to clean up deferred io. This patch modifies the code to only call fb_deferred_io_cleanup() after deferred io has been initialized. With this patch applied we no longer hit BUG_ON() inside fb_deferred_io_cleanup(). Triggers on a Migo-R with the SYS QVGA panel board unmounted. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* video: sh_mobile_lcdcfb deferred io supportMagnus Damm2008-12-221-22/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds sh_mobile_lcdcfb deferred io support for SYS panels. The LCDC hardware block managed by the sh_mobile_lcdcfb driver supports RGB or SYS panel configurations. SYS panels come with an external display controller that is resposible for refreshing the actual LCD panel. RGB panels are controlled directly by the LCDC and they need to be refreshed by the LCDC hardware. In the case of SYS panels we can save some power by configuring the LCDC hardware block in one-shot mode. In this one-shot mode panel refresh is managed by software. This works well together with deferred io since it allows us to stop clocks for most of the time and only enable clocks when we actually want to trigger an update. When there is no fbdev activity the clocks are kept stopped which allows us to deep sleep. The refresh rate in deferred io mode is set using platform data. The same platform data can also be used to disable deferred io mode. As with other deferred io frame buffers user space code should use fsync() on the frame buffer device to trigger an update. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh_mobile_lcdc: use FB_SYS helpers instead of FB_CFBMagnus Damm2008-12-221-3/+5
| | | | | | | | Since the sh_mobile_lcdc hardware has the framebuffer(s) in system RAM, use FB_SYS instead of FB_CFB. Also hook in read and write helpers. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: sh_mobile lcdc clock framework supportMagnus Damm2008-12-221-13/+33
| | | | | | | | Add clock framework support to the lcdc driver and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* video: add sh_mobile_lcdc platform flagsMagnus Damm2008-10-201-0/+5
| | | | | | | Add platform data flags for detailed lcd display configuration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* video: remove unused sh_mobile_lcdc platform dataMagnus Damm2008-10-201-1/+0
| | | | | | | | Remove lddckr from the platform data, these days we calculate the register value from clock source and clock dividers anyway. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* video: sh_mobile_lcdcfb: Support HAVE_CLK=n configurations.Paul Mundt2008-10-011-1/+7
| | | | | | | | | This provides a workaround for users of sh_mobile_lcdcfb that don't define HAVE_CLK and have otherwise sane clock initialization. At the same time, move the sh_mobile_lcdc.h header to include/video/. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* video: export sh_mobile_lcdc panel sizeMagnus Damm2008-08-111-0/+2
| | | | | | | | Export the LCD panel size for sh_mobile_lcdc boards. This allows us to perform dpi and screen aspect ratio calculations in user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* fbdev: SuperH Mobile LCDC DriverMagnus Damm2008-07-241-0/+725
This is the SuperH Mobile LCDC frame buffer driver V2, adding support for the LCDC block found in SuperH Mobile processors. The hardware supports up to two LCD panels per LCDC block, and both RGB and SYS interfaces can be used to hook up LCD panels/modules. The device driver is a regular platform driver, so LCD configuration and board specific hooks are passed to the driver using platform data. LCD modules using SYS interface often require special configuration using the SYS bus, and to solve this cleanly the driver provides SYS interface operations to the board code. Tested on sh7723 and sh7722 processors with a SYS16A QVGA panel and WVGA panels using RGB16 and RGB18 interfaces. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Paul Mundt <lethal@linux-sh.org> Reviewed-by: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud