summaryrefslogtreecommitdiffstats
path: root/drivers/video/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* fbdev: add new TMIO framebuffer driverDmitry Baryshkov2008-10-161-0/+1
| | | | | | | | | | | | Add driver for TMIO framebuffer cells as found e.g. in Toshiba TC6393XB chips. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Ian Molton <spyro@f2s.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* efifb/imacfb consolidation + hardware supportPeter Jones2008-10-161-1/+0
| | | | | | | | | | | | | | | | Remove imacfb entirely, merging its DMI table into the (otherwise very similar) efifb driver. This also adds hardware support for many of the newer Intel Apple hardware. This has been fairly well tested; we've been shipping it in Fedora for some time. Signed-off-by: Peter Jones <pjones@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* viafb: Makefile, KconfigJoseph Chan2008-10-161-0/+1
| | | | | | | | | | Modified drivers/video/Makefile and drivers/video/Kconfig. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [ARM] 5200/1: am200epd: use fb notifiers and gpio apiJaya Kumar2008-08-261-1/+0
| | | | | | | | | | | | | | The original am200epd driver was designed with bad assumptions. It manipulated GPSR/GPLR registers directly. It relied on direct access to the pxa LCDC registers which have since conflicted with commit ce4fb7b892a6d6c6a0f87366b26fd834d2923dd7 . This patch moves it into mach-pxa and overhauls it to use a fb obtained through fb notifiers. It now uses the generic GPIO api. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* video: Kill off leaked CONFIG_FB_SH7343VOU reference.Paul Mundt2008-07-291-1/+0
| | | | | | | | This came in with the SH-Mobile LCDC changes in commit cfb4f5d1750e05f43902197713c50c29e7dfbc99, kill it off. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* video: sh7760fb: SH7760/SH7763 LCDC framebuffer driverNobuhiro Iwamatsu2008-07-241-0/+1
| | | | | | | | | | | | | Framebuffer driver for the SH7760/SH7763 integrated LCD controller. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Reviewed-by: Paul Mundt <lethal@linux-sh.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Siegfried Schaefer <s.schaefer@schaefer-edv.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: add new Cobalt LCD framebuffer driverYoichi Yuasa2008-07-241-0/+1
| | | | | | | | | | | | Add new Cobalt LCD framebuffer driver. [akpm@linux-foundation.org: fix build] Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: SuperH Mobile LCDC DriverMagnus Damm2008-07-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | This is the SuperH Mobile LCDC frame buffer driver V2, adding support for the LCDC block found in SuperH Mobile processors. The hardware supports up to two LCD panels per LCDC block, and both RGB and SYS interfaces can be used to hook up LCD panels/modules. The device driver is a regular platform driver, so LCD configuration and board specific hooks are passed to the driver using platform data. LCD modules using SYS interface often require special configuration using the SYS bus, and to solve this cleanly the driver provides SYS interface operations to the board code. Tested on sh7723 and sh7722 processors with a SYS16A QVGA panel and WVGA panels using RGB16 and RGB18 interfaces. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Paul Mundt <lethal@linux-sh.org> Reviewed-by: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: add the carmine FB driverSebastian Siewior2008-07-241-0/+1
| | | | | | | | | | | Basic FB driver for the carmine chip. The driver registers two FB devices for the two possible screens. The DRAM settings can be be switched via Kconfig (between eval board and custom). Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: platforming metronomefb and am200epdJaya Kumar2008-04-281-0/+1
| | | | | | | | | | | This patch splits metronomefb into the platform independent metronomefb and the platform dependent am200epd. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: powerpc: driver for Freescale 8610 and 5121 DIUYork Sun2008-04-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* xen pvfb: Para-virtual framebuffer, keyboard and pointer driverMarkus Armbruster2008-04-241-0/+1
| | | | | | | | | | | | | | | | | | This is a pair of Xen para-virtual frontend device drivers: drivers/video/xen-fbfront.c provides a framebuffer, and drivers/input/xen-kbdfront provides keyboard and mouse. The backends run in dom0 user space. The two drivers are not in two separate patches, because the intermediate step (one driver, not the other) is somewhat problematic: the backend in dom0 needs both drivers, and will refuse to complete device initialization unless they're both present. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* fbdev: defio and MetronomefbJaya Kumar2008-03-191-0/+1
| | | | | | | | | | | | | | | | Implement support for the E-Ink Metronome controller. It provides an mmapable interface to the controller using defio support. It was tested with a gumstix pxa255 with Vizplex media using Xfbdev and various X clients such as xeyes, xpdf, xloadimage. This patch also fixes the following bug: Defio would cause a hang on write access to the framebuffer as the page fault would be called ad-infinitum. It fixes fb_defio by setting the mapping to be used by page_mkclean. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: add BF52x EZkit Display driverMichael Hennerich2008-03-101-0/+1
| | | | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86_64 EFI boot support: EFI frame buffer driverHuang, Ying2007-11-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds Graphics Output Protocol support to the kernel. UEFI2.0 spec deprecates Universal Graphics Adapter (UGA) protocol and only Graphics Output Protocol (GOP) is produced. Therefore, the boot loader needs to query the UEFI firmware with appropriate Output Protocol and pass the video information to the kernel. As a result of GOP protocol, an EFI framebuffer driver is needed for displaying console messages. The patch adds a EFI framebuffer driver. The EFI frame buffer driver in this patch is based on the Intel Mac framebuffer driver. The ELILO bootloader takes care of passing the video information as appropriate for EFI firmware. The framebuffer driver has been tested in i386 kernel and x86_64 kernel on EFI platform. Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* bf54x-lq043fb: framebuffer driver for Blackfin BF54x framebuffer device driverMichael Hennerich2007-10-161-0/+1
| | | | | | | | | | | | | | Blackfin BF54x framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD [adaplas] Add 'fb' suffix to driver name. Move Makefile entry under platform device section Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uvesafb: the driver coreMichal Januszewski2007-10-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | uvesafb is an enhanced version of vesafb. It uses a userspace helper (v86d) to execute calls to the x86 Video BIOS functions. The driver is not limited to any specific arch and whether it works on a given arch or not depends on that arch being supported by the userspace daemon. It has been tested on x86_32 and x86_64. A single BIOS call is represented by an instance of the uvesafb_ktask structure. This structure contains a buffer, a completion struct and a uvesafb_task substructure, containing the values of the x86 registers, a flags field and a field indicating the length of the buffer. Whenever a BIOS call is made in the driver, uvesafb_exec() builds a message using the uvesafb_task substructure and the contents of the buffer. This message is then assigned a random ack number and sent to the userspace daemon using the connector interface. The message's sequence number is used as an index for the uvfb_tasks array, which provides a mapping from the messages coming from userspace to the in-kernel uvesafb_ktask structs. The userspace daemon performs the requested operation and sends a reply in the form of a uvesafb_task struct and, optionally, a buffer. The seq and ack numbers in the reply should be exactly the same as those in the request. Each message from userspace is processed by uvesafb_cn_callback() and after passing a few sanity checks leads to the completion of a BIOS call request. Signed-off-by: Michal Januszewski <spock@gentoo.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Paulo Marques <pmarques@grupopie.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* remove tx3912fbYoichi Yuasa2007-07-311-1/+0
| | | | | | | | | | Remove tx3912fb. Nino has already removed. It is no longer needed. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Pull video into release branchLen Brown2007-07-221-0/+3
|\
| * ACPI: video: output switch sysfs supportLuming Yu2007-05-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Requires CONFIG_VIDEO_OUTPUT_CONTROL and CONFIG_ACPI_VIDEO. After loading output.ko and video.ko, you would have /sys/class/video_output and several device acpi_videoNum there. For example, I got acpi_video0, acpi_video1,acpi_video2,and acpi_video3 under /sys/class/video_output on my T40. I can query the status of output device0 by running " cat /sys/class/video_output/acpi_video0 " The return value is defined in ACPI SPEC B.5.5 _DCS(Return the Status of Output Device). Also you can turn off video1 and turn on video0 by " echo 0 > acpi_video1; echo 0x80000000 > acpi_video0". Please reference ACPI SPEC B.5.7 _DSS for the parameter definition. Please note that it may or may NOT works purely depending on if your vendor providing correct ACPI video extension support in bios. the driver output.ko and video.ko just works like a interface to invoke BIOS. Signed-off-by: Luming Yu <Luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | OMAP: add TI OMAP framebuffer driverImre Deak2007-07-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add Texas Instruments OMAP framebuffer driver. This driver is being used for various OMAP1/2 series based boards and products e.g Nokia N800 Internet Tablet, H4, H3, Siemens SX1 etc. - LCD panel registration and controller code is separated in different file and interfaces. Signed-off-by: Trilok Soni <soni.trilok@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | atmel_lcdfb: AT91/AT32 LCD Controller framebuffer driverNicolas Ferre2007-05-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | Adds a framebuffer driver to ATMEL AT91SAM9x and AT32 aka AVR32 platforms. Those chips share quite the same IP and this code is suitable for both architectures. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | arkfb: new framebuffer driver for ARK Logic cardsOndrej Zajicek2007-05-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | This patch adds fbdev driver for graphics cards with ARK Logic 2000PV graphics chip with ICS 5342 ramdac. [adaplas@gmail.com: build fixes] Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | vt8623fb: new framebuffer driver for VIA VT8623Ondrej Zajicek2007-05-091-0/+1
|/ | | | | | | | | | This patch adds fbdev driver for graphics core in VIA VT8623 [adaplas@gmail.com: build fixes] Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* xilinxfb: xilinx framebuffer device driverAndrei Konovalov2007-05-081-0/+1
| | | | | | | | | | Add support for the video controller IP block included into Xilinx ML300 and ML403 reference designs. Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* vmlfb: framebuffer driver for Intel Vermilion RangeAlan Hourihane2007-05-081-0/+1
| | | | | | | | | Add the Intel Vermilion Range framebuffer support. Signed-off-by: Alan Hourihane <alanh@tungstengraphics.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: add fb_read/fb_write functions for framebuffers in system RAMAntonino A. Daplas2007-05-081-0/+1
| | | | | | | | | | | | | | | The functions fb_read() and fb_write in fbmem.c assume that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb) where the framebuffer is allocated from system RAM (via vmalloc). Using __raw_read/__raw_write (fb_readl/fb_writel) for these drivers is illegal, especially in other platforms. Create file read and write methods for these types of drivers. These are named fb_sys_read() and fb_sys_write(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: add drawing functions for framebuffers in system RAMAntonino A. Daplas2007-05-081-0/+3
| | | | | | | | | | | | | | | | The generic drawing functions (cfbimgblt, cfbcopyarea, cfbfillrect) assume that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb) where the framebuffer is allocated from system RAM (via vmalloc). Using _raw_read/write and family for these drivers (as used in the cfb* functions) is illegal, especially in other platforms. Create 3 new drawing functions, based almost entirely from the original except that the framebuffer memory is assumed to be in system RAM. These are named as sysimgblt, syscopyarea, and sysfillrect. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: link vgastate.o using KconfigAntonino A. Daplas2007-05-081-7/+7
| | | | | | | | | Instead of directly linking vgastate.o by individual drivers, create a Kconfig option VGASTATE which can be 'SELECT'ed by individual drivers instead. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* savagefb: VGA state save and restoreAntonino A. Daplas2007-05-081-1/+1
| | | | | | | | | | | | | | Allow the saving and restoration of VGA text mode. The state is saved on the first open and restored on the last close. Because of the VGA registers are linearly mapped to the MMIO space, MMIO access is used which is not limited to X86 platforms nor to the primary display device. An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from graphics to text mode. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* nvidiafb: VGA state save and restoreAntonino A. Daplas2007-05-081-1/+1
| | | | | | | | | | | | | | Allow the saving and restoration of VGA text mode. The state is saved on the first open and restored on the last close. Because of the non-linear mapping of the VGA registers to the MMIO space, this will be done only on X86 platforms where the device is the primary display. An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from graphics to text mode. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: hecuba Framebuffer DriverJaya Kumar2007-05-081-0/+1
| | | | | | | | | | | This patch implements support for the E-Ink/hecuba display device. It uses deferred IO support. [akpm@linux-foundation.org: linker section fixes] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: mm: Deferred IO supportJaya Kumar2007-05-081-0/+1
| | | | | | | | | | | | | | | | | This implements deferred IO support in fbdev. Deferred IO is a way to delay and repurpose IO. This implementation is done using mm's page_mkwrite and page_mkclean hooks in order to detect, delay and then rewrite IO. This functionality is used by hecubafb. [adaplas] This is useful for graphics hardware with no directly addressable/mappable framebuffer. Implementing this will allow the "framebuffer" to be accesible from user space via mmap(). Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: display classJames Simmons2007-05-081-1/+1
| | | | | | | | | | | | Add the new display class. This is meant to unite the various solutions to display units ie acpi output device, auxdisplay and the defunct lcd class in the backlight directory. Signed-off-by: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [VIDEO]: Add Sun XVR-2500 framebuffer driver.David S. Miller2007-05-061-0/+1
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* [VIDEO]: Add Sun XVR-500 framebuffer driver.David S. Miller2007-05-061-0/+1
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* m68k: Atari fb revivalMichael Schmitz2007-05-041-1/+2
| | | | | | | | | | | Update the atari fb to 2.6 by Michael Schmitz, Reformatting and rewrite of bit plane functions by Roman Zippel, A few more fixes by Geert Uytterhoeven. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] fb: SM501 framebuffer driverBen Dooks2007-02-201-0/+1
| | | | | | | | | | | | | | | | | | | | Driver for the Silicon Motion SM501 multifunction device framebuffer subsystem. This driver supports both the CRT and LCD panel heads, with some simple acceleration for the cursor plotting and support for screen panning. There is no current support for bitblt/drawing engines, which should be added at a later date. This has been tested on a number of configurations, including PCI and generic-bus, on PPC, ARM and SH4 [akpm@linux-foundation.org: fix warnings] Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Vincent Sanders <vince@arm.linux.org.u.> Acked-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* backlight: Remove bogus SYSFS dependencyRichard Purdie2007-02-201-1/+1
| | | | | | Remove a bogus SYSFS dependency from the backlight class Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
* [PATCH] ps3: Virtual Frame Buffer DriverGeert Uytterhoeven2007-02-121-0/+1
| | | | | | | | | | | | | | | | Add the PS3 Virtual Frame Buffer Driver. As the actual graphics hardware cannot be accessed directly by Linux, ps3fb uses a virtual frame buffer in main memory. The actual screen image is copied to graphics memory by the GPU on every vertical blank, by making a hypervisor call. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] remove the broken FB_S3TRIO driverAdrian Bunk2007-02-121-1/+0
| | | | | | | | | | | | | | | | | | | | The FB_S3TRIO driver: - has been marked as BROKEN for more than two years and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: James Simmons <jsimmons@infradead.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] remove broken video driversAdrian Bunk2007-02-121-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Remove some video drivers that: - had already been marked as BROKEN in 2.6.0 three years ago and - are still marked as BROKEN. These are the following drivers: - FB_CYBER - FB_VIRGE - FB_RETINAZ3 - FB_SUN3 Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive any of these drivers, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-By: Geert Uytterhoeven <geert@linux-m68k.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] fbdev driver for S3 Trio/VirgeOndrej Zajicek2007-02-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Add a driver for S3 Trio / S3 Virge. Driver is tested with most versions of S3 Trio and with S3 Virge/DX, on i386. (akpm: We kind-of have support for this hardware already, but... virgefb.c - amiga/zorro specific, - broken (according to Kconfig), - uses obsolete/nonexistent interface (struct display_switch) - recent Adrian Bunk's patch removes this driver S3triofb.c - ppc/openfirmware specific - minimal functionality - broken (according to Kconfig), - uses obsolete/nonexistent interface (struct display_switch) ) Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Fbdev driver for IBM GXT4500P videocardsPaul Mackerras2006-12-101-0/+1
| | | | | | | | | | | | | This is an fbdev driver for the IBM GXT4500P display card found in some IBM System P (pSeries) machines. These cards have hardware 2D and 3D capabilities, but the driver does not use them; it just exports a dumb framebuffer. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Add generic ddc read functionalityDennis Munsie2006-10-031-0/+1
| | | | | | | | | | | | | | | | | | Adds functionality to read the EDID information over the DDC bus in a generic way. This code is based on the DDC implementation in the radeon driver. [adaplas] - separate from fbmon.c and place in new file fb_ddc.c - remove dependency to CONFIG_I2C and CONFIG_I2C_ALGOBIT, otherwise, feature will not compile if i2c support is compiled as a module - feature is selectable only by drivers needing it. It must have a 'select FB_DDC if xxx' in Kconfig - change printk's to dev_*, the i2c people prefers it Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: statically link the framebuffer notification functionsAntonino A. Daplas2006-07-311-0/+1
| | | | | | | | | | | | | | | The backlight and lcd subsystems can be notified by the framebuffer layer of blanking events. However, these subsystems, as a whole, can function independently from the framebuffer layer. But in order to enable to the lcd and backlight subsystems, the framebuffer has to be compiled also, effectively sucking in a huge amount of unneeded code. To prevent dependency problems, separate out the framebuffer notification mechanism from the framebuffer layer and permanently link it to the kernel. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mbxfb: Add framebuffer driver for the Intel 2700GMike Rapoport2006-07-141-0/+1
| | | | | | | | | | | | | | | | | | Add frame buffer driver for the 2700G LCD controller present on CompuLab CM-X270 computer module. [adaplas] - Add more informative help text to Kconfig - Make DEBUG a Kconfig option as FB_MBX_DEBUG - Remove #include mbxdebug.c, this is frowned upon - Remove redundant casts - Arrange #include's alphabetically - Trivial whitespace Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Add framebuffer and display update module support for pnx4008Vitaly Wool2006-07-031-0/+2
| | | | | | | | | | | Add support for Display Update Module and RGB framebuffer device on Philips PNX4008 ARM board. Signed-off-by: Grigory Tolstolytkin <gtolstolytkin@ru.mvista.com> Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Detaching fbcon: sdd sysfs class device entry for fbconAntonino A. Daplas2006-06-261-4/+4
| | | | | | | | | | | | | | | | In order for this feature to work, an interface will be needed. The most appropriate is sysfs. However, the framebuffer console has no sysfs entry yet. This will create a sysfs class device entry for fbcon under /sys/class/graphics. Add a class_device entry 'fbcon' under class 'graphics'. Console-specific attributes which where previously under class/graphics/fb[x] are moved to class/graphics/fbcon. These attributes, 'con_rotate' and 'con_rotate_all', are also renamed to 'rotate' and 'rotate_all' respectively. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] imacfb: Add Intel-based Macintosh Framebuffer SupportEdgar Hucek2006-06-261-0/+1
| | | | | | | | | | | | | This patch adds a new framebuffer driver for the Intel Based macs. This framebuffer is needed when booting from EFI to get something out the box. [akpm: note: doesn't support modular building] [akpm@osdl.org: cleanups] Signed-off-by: Edgar Hucek <hostmaster@ed-soft.at> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud