summaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'dt-for-linus' of ↵Linus Torvalds2013-11-111-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Most of this branch consists of updates, additions and general churn of the device tree source files in the kernel (arch/arm/boot/dts). Besides that, there are a few things to point out: - Lots of platform conversion on OMAP2+, with removal of old board files for various platforms. - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as well - Some updates to pinctrl and other subsystems. Most of these are for DT-enablement of the various platforms and acks have been collected" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits) ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx) ARM: dts: bcm281xx: Add card detect GPIO ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt) ARM: bcm281xx: Add device node for the GPIO controller ARM: mvebu: Add Netgear ReadyNAS 104 board ARM: tegra: fix Tegra114 IOMMU register address ARM: kirkwood: add support for OpenBlocks A7 platform ARM: dts: omap4-panda: add DPI pinmuxing ARM: dts: AM33xx: Add RNG node ARM: dts: AM33XX: Add hwspinlock node ARM: dts: OMAP5: Add hwspinlock node ARM: dts: OMAP4: Add hwspinlock node ARM: dts: use 'status' property for PCIe nodes ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts ARM: mvebu: Add the core-divider clock to Armada 370/XP ...
| * Merge tag 'omap-for-v3.13/quirk-signed' of ↵Kevin Hilman2013-10-1428-120/+230
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren: Changes needed to prepare for making omap3 device tree only: - Always build in board-generic, and add pdata quirks and auxdata support for it so we have all the pdata related quirks in the same place. - Merge of the drivers/pinctrl changes that are needed for PM to continue working on omap3 and also needed for other omaps eventually. The three pinctrl related patches have been acked by Linus Walleij and are pulled into both the pinctrl tree and this branch. - Few defconfig related changes for drivers needed. * tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (523 commits) ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it ARM: OMAP2+: Add minimal 8250 support for GPMC ARM: OMAP2+: Use pdata quirks for wl12xx for omap3 evm and zoom3 ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap ARM: OMAP2+: Add support for auxdata pinctrl: single: Add support for auxdata pinctrl: single: Add support for wake-up interrupts pinctrl: single: Prepare for supporting SoC specific features ARM: OMAP2+: igep0020: use display init from dss-common ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board +Linux 3.12-rc4 Signed-off-by: Kevin Hilman <khilman@linaro.org>
| * \ Merge tag 'ux500-dt-for-v3.13-2' of ↵Olof Johansson2013-09-301-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt From Linus Walleij: This is a huge device tree and ATAG removal series for ux500: - Move all the clock definitions over to the device tree - Remove all now-redundant AUXDATA and make the ux500 device tree only * tag 'ux500-dt-for-v3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (92 commits) ARM: ux500: delete devices-common remnants clk: ux500: Provide a look-up for the ARMSS clock ARM: ux500: Enable CPUFreq on Snowball ARM: ux500: Provide a Device Tree node for CPUFreq in the DBx500 ARM: ux500: Provide a clock lookup for the Hash driver ARM: ux500: Provide a clock lookup for the Crypto driver ARM: ux500: Fix trivial white-space error in the DBX500 DTSI file ARM: ux500: Remove ATAG booting support for Snowball ARM: ux500: Remove ATAG booting support for HREF ARM: ux500: Remove ATAG booting support for U8520 ARM: ux500: Remove ATAG booting support for MOP500 ARM: ux500: Purge UIB framework when booting with ATAGs ARM: ux500: Take out STUIB support when not booting with Device Tree ARM: ux500: Remove BU21013 ROHM TS support when booting with only ATAGs ARM: ux500: Don't register the STMPE/SKE when booting with ATAG support ARM: ux500: Delete U8500 UIB support when booting with ATAGs ARM: ux500: Don't register Synaptics RMI4 TS when booting with ATAGs ARM: ux500: Purge DB8500 PRCMU registration when not booting with DT ARM: ux500: Stop requesting the SoC device to play 'parent' role ARM: ux500: Remove UART support when booting without Device Tree ... Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | usb: musb: ux500: Don't supply a con_id when requesting the clockLee Jones2013-09-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we supply a con_id then the clock framework will search for that name in MUSB's Device Tree node for the 'clock-names' property. If it's absent the clock request will fail. However, if we don't supply the con_id then clk_get() will call into clk_sys() which will use the device name to search for the appropriate clock, which is much more natural than forcing 'usb'. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | Merge tag 'samsung-dt-s3c64xx' of ↵Olof Johansson2013-09-251-4/+4
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: Add device tree support for S3C64XX - add device tree infrastructure for s3c64xx - add DT SoC file for s3c64xx - add DT board file for FriendlyARM Mini6410 board - add DT board file for SAMSUNG SMDK6410 Based on Common Clk Framework for S3C64XX * tag 'samsung-dt-s3c64xx' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add dts file for S3C6410-based SMDK6410 board ARM: dts: Add dts file for S3C6410-based Mini6410 board ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs ARM: S3C64XX: Add board file for boot using Device Tree gpio: samsung: Skip initialization if device tree is present ARM: S3C64XX: Bypass legacy initialization when booting with DT irqchip: vic: Parse interrupt and resume masks from device tree ARM: S3C64XX: Remove old clock management code ARM: S3C64XX: Migrate clock handling to Common Clock Framework usb: ohci-s3c2410.c: Use clk_prepare_enable/clk_disable_unprepare ARM: S3C64XX: Use clk_prepare_enable/clk_disable_unprepare in dma.c ARM: SAMSUNG: Add soc_is_s3c6400/s3c6410 macros Signed-off-by: Olof Johansson <olof@lixom.net>
* | \ \ \ Merge tag 'soc-for-linus' of ↵Linus Torvalds2013-11-111-4/+4
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Among the things new for this release are: - More support for the AM33xx platforms from TI - Tegra 124 support, and some updates to older tegra families as well - imx cleanups and updates across the board - A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM, and turned out to be too broad a name. New name is ARCH_BCM_MOBILE. - A whole bunch of updates and fixes for integrator, making the platform code more modern and switches over to DT-only booting. - Support for two new Renesas shmobile chipsets. Next up for them is more work on consolidation instead of introduction of new non-multiplatform SoCs, we're all looking forward to that! - Misc cleanups for older Samsung platforms, some Allwinner updates, etc" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits) ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config ARM: bcm_defconfig: Run "make savedefconfig" ARM: bcm281xx: Add ARCH Timers to config rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) ARM: vexpress: Enable platform-specific options in defconfig ARM: vexpress: Make defconfig work again ARM: sunxi: remove .init_time hooks ARM: imx: enable suspend for imx6sl ARM: imx: ensure dsm_request signal is not asserted when setting LPM ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter() ARM: imx6q: move low-power code out of clock driver ARM: imx: drop extern with function prototypes in common.h ARM: imx: reset core along with enable/disable operation ARM: imx: do not return from imx_cpu_die() call ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO ARM: imx: replace imx6q_restart() with mxc_restart() ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt ...
| * \ \ \ \ Merge tag 'keystone-soc-for-arm-soc' of ↵Kevin Hilman2013-10-1128-120/+230
| |\ \ \ \ \ | | | |_|_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/soc From Santosh Shilimkar: SOC updates for Keystone II devices: - Clock tree support - Clock management support using PM core - Keystone config update for EMDA with ack from Vinod - Enable SPI and I2C drivers * tag 'keystone-soc-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: (510 commits) ARM: keystone: Enable I2C and SPI bus support ARM: keystone: Select TI_EDMA to be able to enable SPI driver dma: Allow TI_EDMA selectable for ARCH_KEYSTONE ARM: dts: keystone: Add the SPI nodes ARM: dts: keystone: Add i2c device nodes ARM: keystone: add PM domain support for clock management ARM: keystone: Enable clock drivers ARM: dts: keystone: Add clock phandle to UART nodes ARM: dts: keystone: Add clock tree data to devicetree +Linux 3.12-rc4 Signed-off-by: Kevin Hilman <khilman@linaro.org>
| * | | | | Merge tag 'samsung-clk-s3c64xx' of ↵Olof Johansson2013-09-251-4/+4
| |\ \ \ \ \ | | |_|/ / / | |/| | / / | | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc From Kukjin Kim: Common clk support for S3C64XX - add PLL for S3C64XX - add s3c64xx clock driver - update drivers to use CCF of s3c64xx * tag 'samsung-clk-s3c64xx' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C64XX: Remove old clock management code ARM: S3C64XX: Migrate clock handling to Common Clock Framework usb: ohci-s3c2410.c: Use clk_prepare_enable/clk_disable_unprepare ARM: S3C64XX: Use clk_prepare_enable/clk_disable_unprepare in dma.c ARM: SAMSUNG: Add soc_is_s3c6400/s3c6410 macros Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | usb: ohci-s3c2410.c: Use clk_prepare_enable/clk_disable_unprepareTomasz Figa2013-09-171-4/+4
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch modifies the ohci-s3c2410 driver to prepare and unprepare clocks in addition to enabling and disabling, since it is required by common clock framework. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* | | | Merge tag 'usb-3.13-rc1' of ↵Linus Torvalds2013-11-07154-5249/+6860
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver update from Greg KH: "Here's the big USB driver update for 3.13-rc1. It includes the usual xhci changes, EHCI updates to get the scheduling of USB transactions working better, and a raft of gadget and musb updates as well. All of this has been in linux-next for a while with no reported issues" * tag 'usb-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (305 commits) USB: Maintainers change for usb serial drivers usb: usbtest: support container id descriptor test usb: usbtest: support superspeed device capbility descriptor test usb: usbtest: support usb2 extension descriptor test usb: chipidea: only get vbus regulator for non-peripheral mode USB: ehci-atmel: add usb_clk for transition to CCF usb: cdc-wdm: ignore speed change notifications USB: cdc-wdm: support back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications usbatm: Fix dynamic_debug / ratelimited atm_dbg and atm_rldbg macros printk: pr_debug_ratelimited: check state first to reduce "callbacks suppressed" messages usb: usbtest: support bos descriptor test for usb 3.0 USB: phy: samsung: Support multiple PHYs of same type usb: wusbcore: change WA_SEGS_MAX to a legal value usb: wusbcore: add a quirk for Alereon HWA device isoc behavior usb: wusbcore: combine multiple isoc frames in a single transfer request. usb: wusbcore: set the RPIPE wMaxPacketSize value correctly usb: chipidea: host: more enhancement when ci->hcd is NULL usb: ohci: remove ep93xx bus glue platform driver usb: usbtest: fix checkpatch warning as sizeof code style UWB: clean up attribute use by using ATTRIBUTE_GROUPS() ...
| * | | | usb: usbtest: support container id descriptor testHuang Rui2013-10-301-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. Container ID descriptor is one of the generic device-level capbility descriptors which added in section 9.6.2.3 of USB 3.0 spec. This patch adds to support getting Container ID descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: usbtest: support superspeed device capbility descriptor testHuang Rui2013-10-301-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. SuperSpeed USB Device Capability descriptor is one of the generic device-level capbility descriptors which added in section 9.6.2.2 of USB 3.0 spec. This patch adds to support getting SuperSpeed USB Device Capability descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: usbtest: support usb2 extension descriptor testHuang Rui2013-10-301-0/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. USB2.0 Extension descriptor is one of the generic device-level capbility descriptors which added in section 9.6.2.1 of USB 3.0 spec. This patch adds to support getting usb2.0 extension descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: chipidea: only get vbus regulator for non-peripheral modePeter Chen2013-10-301-12/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the user chooses peripheral mode for this controller, the vbus regulator doesn't need to get, since the host will supply the vbus, it can save one vbus pin for other usage. Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Frank Li <frank.li@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | USB: ehci-atmel: add usb_clk for transition to CCFBoris BREZILLON2013-10-301-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AT91 PMC (Power Management Controller) provides a USB clock used by the different USB controllers (ehci, ohci and udc). The atmel-ehci driver must configure the usb clock rate to 48Mhz in order to get a fully functionnal USB host controller. This configuration was formely done in mach-at91/clock.c, but will be bypassed when moving to common clk framework. This patch adds support for usb clock retrieval and configuration only if CCF is enabled (CONFIG_COMMON_CLK). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: cdc-wdm: ignore speed change notificationsBjørn Mork2013-10-291-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only notification supported by the Device Management class is Response Available. But this driver is also used as a subdriver of other CDC classes, allowing notifications like Speed Change and Network Connection. This results in log messages which are only confusing to an end user: [66255.801874] cdc_mbim 1-3:1.5: unknown notification 42 received: index 5 len 8 These drivers use cdc-wdm as a subdriver to allow access to an embedded management protocol, and all management is expected to use this protocol. There is therefore no need to handle any of these optional CDC notifications. Instead we can let the cdc-wdm driver recognize them and log a debug level message instead of an error. Reported-by: Rob Gardner <robmatic@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | USB: cdc-wdm: support back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE ↵Greg Suarez2013-10-291-4/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | notifications Some MBIM devices send back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications when sending a message over multiple fragments or when there are unsolicited messages available. Count up the number of USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications received and decrement the count and submit the urb for the next response each time userspace completes a read the response. Signed-off-by: Greg Suarez <gsuarez@smithmicro.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usbatm: Fix dynamic_debug / ratelimited atm_dbg and atm_rldbg macrosJoe Perches2013-10-291-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix atm_dbg to use normal pr_debug not dynamic_pr_debug because dynamic_pr_debug may not be compiled in at all. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: usbtest: support bos descriptor test for usb 3.0Huang Rui2013-10-291-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. This patch adds to support getting bos descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | USB: phy: samsung: Support multiple PHYs of same typeAnton Tikhomirov2013-10-292-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes limitation when only one PHY of specific type could be used. Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: wusbcore: change WA_SEGS_MAX to a legal valueThomas Pugliese2013-10-291-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | change WA_SEGS_MAX to a number that is legal according to the WUSB spec. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: wusbcore: add a quirk for Alereon HWA device isoc behaviorThomas Pugliese2013-10-294-17/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a quirk for Alereon HWA devices to concatenate the frames of isoc transfer requests. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: wusbcore: combine multiple isoc frames in a single transfer request.Thomas Pugliese2013-10-291-111/+255
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Combine multiple isoc frames in a single transfer request. This allows the HWA to take advantage of bursting to deliver data to endpoints whose logical service interval is less than the minimum wireless USB service interval of 4ms. Wireless audio quality is much improved after this update. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: wusbcore: set the RPIPE wMaxPacketSize value correctlyThomas Pugliese2013-10-291-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For isochronous endpoints, set the RPIPE wMaxPacketSize value using wOverTheAirPacketSize from the endpoint companion descriptor instead of wMaxPacketSize from the normal endpoint descriptor. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: chipidea: host: more enhancement when ci->hcd is NULLPeter Chen2013-10-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Like http://marc.info/?l=linux-usb&m=138200449428874&w=2 said: two more things are needed to be done: - If host_start fails, the host_stop should not be called, so we add check that ci->hcd is not NULL. - if the host_start fails at the beginning, we need to consider regulator mismatch issue. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: ohci: remove ep93xx bus glue platform driverH Hartley Sweeten2013-10-293-183/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert ep93xx to use the OHCI platform driver and remove the ohci-ep93xx bus glue driver. Enable CONFIG_OHCI_HCD_PLATFORM in the ep93xx_defconfig so that USB is still enabled by default on the EP93xx platform. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: usbtest: fix checkpatch warning as sizeof code styleHuang Rui2013-10-291-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Script checkpatch.pl always complains incorrect code style like below: WARNING: sizeof *udev->bos->desc should be sizeof(*udev->bos->desc) This patch fixes the warning for usbtest module. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb/gadget: f_mass_storage: use string literal as format in dev_set_nameAndrzej Pietrasiewicz2013-10-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix commit b27c08c953e994f792a03d9b7cbc5cf3f9844135 where dev_set_name() is used without a string literal as format. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | USB:add new zte 3g-dongle's pid to option.cRui li2013-10-251-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Rui li <li.rui27@zte.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Merge tag 'usb-for-v3.13' of ↵Greg Kroah-Hartman2013-10-2443-1162/+2883
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.13 Final conversions to configfs for mass storage, acm_ms, and multi gadgets. MUSB should now work out of the box on AM335x-based boards (beagle bone white and black) with DMA thanks to Sebastian's work. We can now enable VERBOSE_DEBUG on builds of drivers/usb/gadget/ by selecting CONFIG_USB_GADGET_VERBOSE. s3c-hsotg got quite a few non-critical fixes but also learned a few new tricks (isochronous transfers, multi count support). The Marvel USB3 Controller driver got a memory leak fix. devm_usb_get_phy() learned not to return NULL, ever. Other than these patches, we have the usual set of cleanups ranging from removal of unnecessary *_set_drvdata() to using SIMPLE_DEV_PM_OPS. Signed-of-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: phy: twl6030-usb: Include linux/of.h headerSachin Kamat2013-10-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'of_match_ptr' is defined in linux/of.h. Include it explicitly to avoid build breakage in the future. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: musb: cppi41: allow to defer probing if DMA isn't yet availableSebastian Andrzej Siewior2013-10-172-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If everything (musb, cppi41, phy) is built-in then musb will start without the dma engine printing only |musb-hdrc musb-hdrc.0.auto: Falied to request rx1. The reason for this is that the musb device structs are created & probed before those of the cppi41 device. So the cppi41 device is probed too late. As a workaround for this allow the musb_cppi41 part to defer the probe if everything is fine except for the missing DMA controller. In case of another error we continue. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: musb: core: Call dma_controller_destroy() in error path only once.Sebastian Andrzej Siewior2013-10-171-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit f3ce4d5 ("usb: musb: core: call dma_controller_destroy() in the err path") I erroneously assumed that the dma controller is not removed in the error patch. This was wrong because it happens later via musb_free(). That means the original commit can be reverted because it is wrong or we do this, so it is more obvious. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: musb: core: properly free host / device structs in err pathSebastian Andrzej Siewior2013-10-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch fixes two issues in the error path cleanup: - in MUSB_PORT_MODE_DUAL_ROLE mode, if musb_gadget_setup() fails we never cleanup the host struct earlier allocated. - if musb_init_debugfs() or sysfs_create_group() fails, then we never free the host part initialization, only device part. Cc: stable@vger.kernel.org # v3.11 Cc: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: gadget: f_mass_storage: style corrections, cleanup & simplificationAndrzej Pietrasiewicz2013-10-171-19/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix spacing, improve error code returned, remove unused #define, use strtobool() instead of kstrtou8(). Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: musb: dsps: run the timer only on OTG systemsSebastian Andrzej Siewior2013-10-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I introduced this check here because it looked wrong in HOST only configurions. The timer would remove that session bit and will never come back and so there would not be another session. Now that I played with OTG for a while I belive this workaround is only required for the OTG mode because we have to end the session and then we have to try to start manually. Therefore, this patch limits this timer to the OTG only port mode so we don't need to poll around in device only mode. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: musb: dsps: redo the otg timerSebastian Andrzej Siewior2013-10-171-11/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the comments, we rely on the OTG timer because the core does not expose some important OTG details. So far this is all I know. After playing with OTG I stumbled over a problem: musb is recognized as a B-device without a problem. Whenever a cable is plugged, the VBUS rises, musb recognizes this as a starting session, sets the MUSB_DEVCTL_SESSION bit by itself and a RESET interrupt occurs, the session starts. Good. After a disconnect, the timer is started and re-starts itself because it remains in B_IDLE with the BDEVICE set. I didn't figure the the reason or the need for it. Nothing changes here except for OTG state from B to A device if the BDEVICE bit disappears. This doesn't make much sense to me because nothing happens after this. _IF_ we receive an interrupt before the state change then we may act on wrong condition. Plugging a B-device (and letting MUSB act as host) doesn't work here. The reason seems to be that the MUSB tries to start a session, it fails and then it removes the bit. So we never start as a host. This patch sets the MUSB_DEVCTL_SESSION bit in the IDLE state so musb can try to establish a session as host. After the bit is set, musb tries to start a session and if it fails it clears the bit. Therefore it will try over and over again until a session either as host or as device is established. The readout of the MUSB_DEVCTL register after the removal the MUSB_DEVCTL_SESSION (in A_WAIT_BCON) has been removed because it did not contain the BDEVICE bit set (in the second read) leading to A_IDLE. After plugging a host musb assumed that it is also a host and complained about a missing reset. However a third read of the register has has the BDEVICE bit set so it seems that it is not stable. This mostly what da8xx.c is doing except that we set the timer also after A_WAIT_BCON so the session bit can be triggered. Whit this change I was able to keep am335x-evm in OTG mode and plug in either a HOST or a DEVICE and in a random order and the device was recognized. Cc: stable@vger.kernel.org # v3.11 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: musb: dsps: remove declartion for dsps_musb_try_idle()Sebastian Andrzej Siewior2013-10-171-38/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves dsps_musb_try_idle() before dsps_musb_enable() so the declaration (of dsps_musb_try_idle() can be removed. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: musb: dsps: move try_idle to start hookSebastian Andrzej Siewior2013-10-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The timer is initialized right after musb is probed. There is actually no need to have this timer running because _nothing_ will happen until we have the gadget loaded. Also we need this timer only if we run in OTG mode _and_ we need it also after the gadget has been replaced with another one. I've been looking at am35x.c, da8xx.c, omap2430.c, tusb6010.c. da8xx seem to have the same problem as dsps and doing mostly the same thing. tusb6010 seem to do something different and do some actual "idle / power saving" work so I am not too comfortable to remove musb_platform_try_idle() from musb_gadget_setup(). Therefore this patch does not start the timer if there is no gadget active (which is at musb_gadget_setup() at time). In order to have the timer active after the gadget is loaded it will be triggered from dsps_musb_enable(). Cc: stable@vger.kernel.org # v3.11 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: musb: call musb_start() only once in OTG modeSebastian Andrzej Siewior2013-10-171-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 001dd84 ("usb: musb: start musb on the udc side, too") it was ensured that the state engine is started also in OTG mode after a removal / insertion of the gadget. Unfortunately this change also introduced a bug: If the device is configured as OTG and it connected with a remote host _without_ loading a gadget then we bug() later (because musb->otg->gadget is not initialized). Initially I assumed it might be nice to have the host part of musb in OTG mode working without having a gadget loaded. This bug and fact that it wasn't working like this before the host/gadget split made me realize that this was a silly idea. This patch now introduces back the old behavior where in OTG mode the host mode is only working after the gadget has been loaded. Cc: stable@vger.kernel.org # v3.11 Cc: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: gadget: s3c-hsotg: fix can_write limit for non-periodic endpointsRobert Baldyga2013-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Value of can_write variable in s3c_hsotg_write_fifo function should be limited to 512 only for non-periodic endpoints. There was some discrepancy between comment and code, becouse comment suggests correct behavior, but in the code limit was applied to periodic endpoints too. So there is additional check causing the limitation concerns only non-periodic endpoints. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: gadget: s3c-hsotg: fix interrupt configuration in dedicated-fifo modeRobert Baldyga2013-10-151-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In dedicated-fifo mode TxFIFOEmpty interrupt should be asserted when TxFIFO for this endpoint is completly empty, so NPTxFEmpLvl and PTxFEmpLvl bits are set in GAHBCFG register. In DIEPMSK register INTknTXFEmpMsk is set, becouse it's needed to indicate FIFO Empty state. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: gadget: s3c-hsotg: fix clear feature ENDPOINT_HALTRobert Baldyga2013-10-151-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All requests for endpoint are completed when it was halted and the halt was cleared by CLEAR_FEATURE, but not when new state is same as previous. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: gadget: s3c-hsotg: fix "halted" property updatingRobert Baldyga2013-10-151-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Property "halted" of s3c_hsotg_ep structure is actually initialised when ep enabled, and changed when halt is set/cleared. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: gadget: s3c-hsotg: add DAINT maskingRobert Baldyga2013-10-151-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In OEPInt/IEPInt interrupts handling added bitwise and of DAINT and DAINTMSK, because we should handle masked interrupts only. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: gadget: s3c-hsotg: fix endpoint interrupts handlingRobert Baldyga2013-10-151-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When s3c_hsotg_trytx is called for ep without enqueued request, interrupts for this ep are disabled, to prevent interrupt flooding. Interrupts are enabled when new request for this ep is starting. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: gadget: s3c-hsotg: fix s3c_hsotg_write_fifo function for dedicated fifo ↵Robert Baldyga2013-10-151-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mode In s3c_hsotg_write_fifo function PTxFEmp/NPTxFEmp interrupts are enabled only in shared-fifo mode. In dedicated-fifo mode they should not be used (when enabled then cause interrupt storm). Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: gadget: s3c-hsotg: fix "protocol stall" handlingRobert Baldyga2013-10-151-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After normal handling of SetupDone interrupt, XferCompl interrupt occurs, and then we enqueue new setup request. But when ep0 is stalled, there is no XferCompl, so we have to enqueue setup request immediately after stalling ep. Otherwise incoming control requests won't be processed correctly. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: gadget: storage_common: pass filesem to fsg_store_cdromAndrzej Pietrasiewicz2013-10-153-13/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If cdrom flag is set ro flag is implied. Try setting the ro first, and only if it succeeds set the cdrom flag. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * | | | usb: gadget: storage_common: use strtobool instead of kstrtouintAndrzej Pietrasiewicz2013-10-151-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | strtobool is more flexible for the user and is more appropriate in the context. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
OpenPOWER on IntegriCloud