summaryrefslogtreecommitdiffstats
path: root/drivers/usb/usbip
Commit message (Collapse)AuthorAgeFilesLines
* usbip: vudc_tx: fix v_send_ret_submit() vulnerability to null xfer bufferShuah Khan2018-01-041-2/+9
| | | | | | | | | | | | | v_send_ret_submit() handles urb with a null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: remove kernel addresses from usb device and urb debug msgsShuah Khan2018-01-041-14/+3
| | | | | | | | | | | | | usbip_dump_usb_device() and usbip_dump_urb() print kernel addresses. Remove kernel addresses from usb device and urb debug msgs and improve the message content. Instead of printing parent device and bus addresses, print parent device and bus names. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious inputShuah Khan2018-01-041-0/+19
| | | | | | | | | | | Harden CMD_SUBMIT path to handle malicious input that could trigger large memory allocations. Add checks to validate transfer_buffer_length and number_of_packets to protect against bad input requesting for unbounded memory allocations. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: stub_rx: fix static checker warning on unnecessary checksShuah Khan2017-12-191-10/+1
| | | | | | | | | | | | | | | | | | | | | Fix the following static checker warnings: The patch c6688ef9f297: "usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input" from Dec 7, 2017, leads to the following static checker warning: drivers/usb/usbip/stub_rx.c:346 get_pipe() warn: impossible condition '(pdu->u.cmd_submit.transfer_buffer_length > ((~0 >> 1))) => (s32min-s32max > s32max)' drivers/usb/usbip/stub_rx.c:486 stub_recv_cmd_submit() warn: always true condition '(pdu->u.cmd_submit.transfer_buffer_length <= ((~0 >> 1))) => (s32min-s32max <= s32max)' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: prevent leaking socket pointer address in messagesShuah Khan2017-12-193-14/+7
| | | | | | | | | | usbip driver is leaking socket pointer address in messages. Remove the messages that aren't useful and print sockfd in the ones that are useful for debugging. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: stub: stop printing kernel pointer addresses in messagesShuah Khan2017-12-193-10/+8
| | | | | | | | | Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: vhci: stop printing kernel pointer addresses in messagesShuah Khan2017-12-193-23/+13
| | | | | | | | | Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: fix stub_send_ret_submit() vulnerability to null transfer_bufferShuah Khan2017-12-081-0/+7
| | | | | | | | | | | | stub_send_ret_submit() handles urb with a potential null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Reported-by: Secunia Research <vuln@secunia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: prevent vhci_hcd driver from leaking a socket pointer addressShuah Khan2017-12-082-9/+17
| | | | | | | | | | | | | | | | | | | | When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by: Secunia Research <vuln@secunia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious inputShuah Khan2017-12-081-4/+31
| | | | | | | | | | | | | Harden CMD_SUBMIT path to handle malicious input that could trigger large memory allocations. Add checks to validate transfer_buffer_length and number_of_packets to protect against bad input requesting for unbounded memory allocations. Validate early in get_pipe() and return failure. Reported-by: Secunia Research <vuln@secunia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: fix stub_rx: get_pipe() to validate endpoint numberShuah Khan2017-12-081-7/+11
| | | | | | | | | | | | | | | get_pipe() routine doesn't validate the input endpoint number and uses to reference ep_in and ep_out arrays. Invalid endpoint number can trigger BUG(). Range check the epnum and returning error instead of calling BUG(). Change caller stub_recv_cmd_submit() to handle the get_pipe() error return. Reported-by: Secunia Research <vuln@secunia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: Fix USB device hang due to wrong enabling of scatter-gatherYuyang Du2017-11-301-1/+0
| | | | | | | | | | | | | | The previous USB3 SuperSpeed enabling patches mistakenly enabled URB scatter-gather chaining, which is actually not supported by the VHCI HCD. This patch fixes that. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197867 Fixes: 03cd00d538a6feb ("usbip: vhci-hcd: Set the vhci structure up to work") Reported-by: Juan Zea <juan.zea@qindel.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Cc: stable <stable@vger.kernel.org> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-4.15-rc1' of ↵Linus Torvalds2017-11-1320-287/+29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
| * USB: usbip: Remove redundant license textGreg Kroah-Hartman2017-11-0720-277/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Valentina Manea <valentina.manea.m@gmail.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usbip: use monotonic timestampsArnd Bergmann2017-11-073-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This gets rid of the deprecated do_gettimeofday() function in usbip. The comment above vgadget_get_frame() mentions that it suffers from issues with the time jumps due to suspend and settimeofday, so I'm changing it to use ktime_get_ts64() to use monotonic times that don't have this problem. I couldn't tell whether we should use CLOCK_MONOTONIC or CLOCK_MONOTONIC_RAW here, the difference being the exact rate when correcting for NTP. I picked monotonic time since it doesn't change the speed to the existing code and should be better synchronized with other machines we talk to. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usbip: fix off-by-one frame number calculationArnd Bergmann2017-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vgadget_get_frame returns a frame number from 0 to 2046, which may require an expensive division operation to wrap at one lower than the usual number. I can't see any reason for this, and all other drivers wrap at a power-of-two number. My best explanation is that it was a simple typo, so I'm changing the % modulo operator into a cheaper bitmask that the other drivers use, to make it wrap after 0x7ff rather than before it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman2017-11-0420-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: usbip: Convert timers to use timer_setup()Kees Cook2017-11-011-3/+3
| | | | | | | | | | | | | | | | | | | | | | In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: vhci-hcd: make vhci_hc_driver constBhumika Goyal2017-08-311-1/+1
| | | | | | | | Make this const as it is not modified anywhere. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: auto retry for concurrent attachNobuo Iwata2017-08-311-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds recovery from false busy state on concurrent attach operation. The procedure of attach operation is as below. 1) Find an unused port in /sys/devices/platform/vhci_hcd/status. (userspace) 2) Request attach found port to driver through /sys/devices/platform/vhci_hcd/attach. (userspace) 3) Lock table, reserve requested port and unlock table. (vhci driver) Attaching more than one remote devices concurrently, same unused port number will be found in step-1. Then one request will succeed and others will fail even though there are some unused ports. With this patch, driver returns EBUSY when requested port has already been used. In this case, attach command retries from step-1: finding another unused port. If there's no unused port, the attach operation will fail in step-1. Otherwise it retries automatically using another unused port. vhci-hcd's interface (only errno) is changed as following. Current errno New errno Condition EINVAL same as left specified port number is in invalid range EAGAIN same as left platform_get_drvdata() failed EINVAL same as left specified socket fd is not valid EINVAL EBUSY specified port status is not free The errno EBUSY was not used in userspace src/usbip_attach.c:import_device(). It is needed to distinguish the condition to be able to retry from other unrecoverable errors. It is possible to avoid this failure by introducing userspace exclusive control. But it's exaggerated for this special condition. The locking itself has done in driver. As an alternate solution, userspace doesn't specify port number, driver searches unused port and it returns port number to the userspace. With this solution, the interface is much different than this patch. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usbip: remove unneeded MODULE_VERSION() usageGreg Kroah-Hartman2017-07-224-8/+0
| | | | | | | | | | | | MODULE_VERSION is useless for in-kernel drivers, so just remove all usage of it in the USB usbip drivers. Along with this, the USBIP_VERSION macros was removed as is was also pointless, as well as printing out the driver version to the syslog at init time, which is not necessary at all. Cc: Valentina Manea <valentina.manea.m@gmail.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'driver-core-4.13-rc1' of ↵Linus Torvalds2017-07-031-4/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core update for 4.13-rc1. The large majority of this is a lot of cleanup of old fields in the driver core structures and their remaining usages in random drivers. All of those fixes have been reviewed by the various subsystem maintainers. There's also some small firmware updates in here, a new kobject uevent api interface that makes userspace interaction easier, and a few other minor things. All of these have been in linux-next for a long while with no reported issues" * tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits) arm: mach-rpc: ecard: fix build error zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO() driver-core: remove struct bus_type.dev_attrs powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type powerpc: vio: use dev_groups and not dev_attrs for bus_type USB: usbip: convert to use DRIVER_ATTR_RW s390: drivers: convert to use DRIVER_ATTR_RO/WO platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW pcmcia: ds: convert to use DRIVER_ATTR_RO wireless: ipw2x00: convert to use DRIVER_ATTR_RW net: ehea: convert to use DRIVER_ATTR_RO net: caif: convert to use DRIVER_ATTR_RO TTY: hvc: convert to use DRIVER_ATTR_RW PCI: pci-driver: convert to use DRIVER_ATTR_WO IB: nes: convert to use DRIVER_ATTR_RW HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups arm: ecard: fix dev_groups patch typo tty: serdev: use dev_groups and not dev_attrs for bus_type sparc: vio: use dev_groups and not dev_attrs for bus_type hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type ...
| * USB: usbip: convert to use DRIVER_ATTR_RWGreg Kroah-Hartman2017-06-121-4/+3
| | | | | | | | | | | | | | | | | | | | We are trying to get rid of DRIVER_ATTR(), and the usbip driver attribute can be trivially changed to use DRIVER_ATTR_RW(). Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: <linux-usb@vger.kernel.org> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usbip: Fix uninitialized variable bug in vhciYuyang Du2017-06-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | The patch 03cd00d538a6: "usbip: vhci-hcd: Set the vhci structure up to work" introduced a bug which uses a vairable without initialization in error handling code. Fix it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usbip: vhci-hcd: Clean up the code by adding a new macroYuyang Du2017-06-132-6/+9
| | | | | | | | | | | | | | | | | | | | Each vhci has 2*VHCI_HC_PORTS ports, in which VHCI_HC_PORTS ports are HighSpeed (or below), and VHCI_HC_PORTS are SuperSpeed. This new macro VHCI_PORTS reflects this configuration. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usbip: vhci-hcd: Add USB3 port status bitsYuyang Du2017-06-131-6/+50
| | | | | | | | | | | | | | | | | | As USB3 has (slightly) different bit meanings in the port status. Add a new status bit array for USB3. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usbip: Add USB_SPEED_SUPER as valid argYuyang Du2017-06-131-0/+1
| | | | | | | | | | | | | | | | | | With this patch, USB_SPEED_SUPER is a valid speed when attaching a USB3 SuperSpeed device. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usbip: vhci-hcd: Add USB3 SuperSpeed supportYuyang Du2017-06-133-94/+345
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a USB3 HCD to an existing USB2 HCD and provides the support of SuperSpeed, in case the device can only be enumerated with SuperSpeed. The bulk of the added code in usb3_bos_desc and hub_control to support SuperSpeed is borrowed from the commit 1cd8fd2887e162ad ("usb: gadget: dummy_hcd: add SuperSpeed support"). With this patch, each vhci will have VHCI_HC_PORTS HighSpeed ports and VHCI_HC_PORTS SuperSpeed ports. Suggested-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usbip: vhci-hcd: Set the vhci structure up to workYuyang Du2017-06-134-105/+145
| | | | | | | | | | | | | | | | | | This patch enables the new vhci structure. Its lock protects both the USB2 hub and the shared USB3 hub. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usbip: vhci-hcd: Rework vhci_hcd_initYuyang Du2017-06-131-23/+28
| | | | | | | | | | | | | | | | | | | | A vhci struct is added as the platform-specific data to the vhci platform device, in order to get the vhci by its platform device. This is done in vhci_hcd_init(). Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usbip: vhci-hcd: Move VHCI platform device into vhci structYuyang Du2017-06-133-13/+13
| | | | | | | | | | | | | | | | | | Every VHCI is a platform device, so move the platform_device struct into the VHCI struct. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usbip: vhci-hcd: Add vhci structYuyang Du2017-06-131-1/+11
| | | | | | | | | | | | | | | | | | | | | | In order to support SuperSpeed devices, a USB3 HCD is added to share the USB2 HCD. As a result, a VHCI is composed of two vhci_hcds associated with the two HCDs respectively. So we add another level of abstraction, vhci, and thus this vhci structure. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usbip: vhci-hcd: Rename function names to reflect their struct namesYuyang Du2017-06-134-32/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | These helper function names are renamed to have their full struct names to avoid confusion: - hcd_to_vhci() -> hcd_to_vhci_hcd() - vhci_to_hcd() -> vhci_hcd_to_hcd() - vdev_to_vhci() -> vdev_to_vhci_hcd() Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: usbip: set buffer pointers to NULL after freeMichael Grzeschik2017-06-132-0/+8
|/ | | | | | | | | | | | | | The usbip stack dynamically allocates the transfer_buffer and setup_packet of each urb that got generated by the tcp to usb stub code. As these pointers are always used only once we will set them to NULL after use. This is done likewise to the free_urb code in vudc_dev.c. This patch fixes double kfree situations where the usbip remote side added the URB_FREE_BUFFER. Cc: stable@vger.kernel.org Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usbip: fix nonconforming hub descriptorJohan Hovold2017-05-171-3/+8
| | | | | | | | | | | | | | | | | | | | Fix up the root-hub descriptor to accommodate the variable-length DeviceRemovable and PortPwrCtrlMask fields, while marking all ports as removable (and leaving the reserved bit zero unset). Also add a build-time constraint on VHCI_HC_PORTS which must never be greater than USB_MAXCHILDREN (but this was only enforced through a KConfig constant). This specifically fixes the descriptor layout whenever VHCI_HC_PORTS is greater than seven (default is 8). Fixes: 04679b3489e0 ("Staging: USB/IP: add client driver") Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net> Cc: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: usbip: Remove unnecessary get_vdev()Yuyang Du2017-04-081-30/+2
| | | | | | | | | | | vhci_tx_urb() should be able to get the vhci_device from its caller vhci_urb_enqueue(), instead of brutal-force searching it. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'WIP.sched-core-for-linus' of ↵Linus Torvalds2017-03-031-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched.h split-up from Ingo Molnar: "The point of these changes is to significantly reduce the <linux/sched.h> header footprint, to speed up the kernel build and to have a cleaner header structure. After these changes the new <linux/sched.h>'s typical preprocessed size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K lines), which is around 40% faster to build on typical configs. Not much changed from the last version (-v2) posted three weeks ago: I eliminated quirks, backmerged fixes plus I rebased it to an upstream SHA1 from yesterday that includes most changes queued up in -next plus all sched.h changes that were pending from Andrew. I've re-tested the series both on x86 and on cross-arch defconfigs, and did a bisectability test at a number of random points. I tried to test as many build configurations as possible, but some build breakage is probably still left - but it should be mostly limited to architectures that have no cross-compiler binaries available on kernel.org, and non-default configurations" * 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits) sched/headers: Clean up <linux/sched.h> sched/headers: Remove #ifdefs from <linux/sched.h> sched/headers: Remove the <linux/topology.h> include from <linux/sched.h> sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h> sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h> sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h> sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h> sched/headers: Remove <linux/sched.h> from <linux/sched/init.h> sched/core: Remove unused prefetch_stack() sched/headers: Remove <linux/rculist.h> from <linux/sched.h> sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h> sched/headers: Remove <linux/signal.h> from <linux/sched.h> sched/headers: Remove <linux/rwsem.h> from <linux/sched.h> sched/headers: Remove the runqueue_is_locked() prototype sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h> sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h> sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h> sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h> ...
| * sched/headers: Prepare to move the get_task_struct()/put_task_struct() and ↵Ingo Molnar2017-03-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | related APIs from <linux/sched.h> to <linux/sched/task.h> But first update usage sites with the new header dependency. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | Merge branch 'work.sendmsg' of ↵Linus Torvalds2017-03-021-21/+11
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs sendmsg updates from Al Viro: "More sendmsg work. This is a fairly separate isolated stuff (there's a continuation around lustre, but that one was too late to soak in -next), thus the separate pull request" * 'work.sendmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ncpfs: switch to sock_sendmsg() ncpfs: don't mess with manually advancing iovec on send ncpfs: sendmsg does *not* bugger iovec these days ceph_tcp_sendpage(): use ITER_BVEC sendmsg afs_send_pages(): use ITER_BVEC rds: remove dead code ceph: switch to sock_recvmsg() usbip_recv(): switch to sock_recvmsg() iscsi_target: deal with short writes on the tx side [nbd] pass iov_iter to nbd_xmit() [nbd] switch sock_xmit() to sock_{send,recv}msg() [drbd] use sock_sendmsg()
| * usbip_recv(): switch to sock_recvmsg()Al Viro2016-12-261-21/+11
| | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | scripts/spelling.txt: add "overwritting" pattern and fix typo instancesMasahiro Yamada2017-02-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | Fix typos and add the following to the scripts/spelling.txt: overwritting||overwriting Link: http://lkml.kernel.org/r/1481573103-11329-29-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drivers: usb: usbip: Add missing break statement to switchGustavo A. R. Silva2017-02-091-0/+1
|/ | | | | | | | | Add missing break statement to prevent the code for case USB_PORT_FEAT_C_RESET falling through to the default case. Addresses-Coverity-ID: 143155 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: fix warning in vhci_hcd_probe/lockdep_init_mapShuah Khan2016-12-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vhci_hcd calls sysfs_create_group() with dynamically allocated sysfs attributes triggering the lock-class key not persistent warning. Call sysfs_attr_init() for dynamically allocated sysfs attributes to fix it. vhci_hcd vhci_hcd: USB/IP Virtual Host Controller vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 2 BUG: key ffff88006a7e8d18 not in .data! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3131 lockdep_init_map+0x60c/0x770 DEBUG_LOCKS_WARN_ON(1)[ 1.567044] Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc7+ #58 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006bce6eb8 ffffffff81f96c8a ffffffff00000a02 1ffff1000d79cd6a ffffed000d79cd62 000000046bce6ed8 0000000041b58ab3 ffffffff8598af40 ffffffff81f969f8 0000000000000000 0000000041b58ab3 0000000000000200 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96c8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff812b808f>] __warn+0x19f/0x1e0 kernel/panic.c:550 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff813f3efc>] lockdep_init_map+0x60c/0x770 kernel/locking/lockdep.c:3131 [<ffffffff819e43d4>] __kernfs_create_file+0x114/0x2a0 fs/kernfs/file.c:954 [<ffffffff819e68f5>] sysfs_add_file_mode_ns+0x225/0x520 fs/sysfs/file.c:305 [< inline >] create_files fs/sysfs/group.c:64 [<ffffffff819e8a89>] internal_create_group+0x239/0x8f0 fs/sysfs/group.c:134 [<ffffffff819e915f>] sysfs_create_group+0x1f/0x30 fs/sysfs/group.c:156 [<ffffffff8323de24>] vhci_start+0x5b4/0x7a0 drivers/usb/usbip/vhci_hcd.c:978 [<ffffffff82c907ca>] usb_add_hcd+0x8da/0x1c60 drivers/usb/core/hcd.c:2867 [<ffffffff8323bc57>] vhci_hcd_probe+0x97/0x130 drivers/usb/usbip/vhci_hcd.c:1103 --- --- ---[ end trace c33c7b202cf3aac8 ]--- Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: vudc: Refactor init_vudc_hw() to be more obviousKrzysztof Opasiak2016-12-051-17/+18
| | | | | | | | | | | | | | | | | Current implementation of init_vudc_hw() adds ep0 to ep_list and then after looping through all endpoints removes it from that list. As this may be misleading let's refactor this function and avoid adding and removing ep0 to eplist and place it immediately in correct place. In addition let's remove redundant 0 assignments as ep array is zeroed during allocation. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: vudc: fix: Clear already_seen flag also for ep0Krzysztof Opasiak2016-12-051-0/+2
| | | | | | | | | | | | | | | | | | ep_list inside gadget structure doesn't contain ep0. It is stored separately in ep0 field. This causes an urb hang if gadget driver decides to delay setup handling. On host side this is visible as timeout error when setting configuration. This bug can be reproduced using for example any gadget with mass storage function. Fixes: abdb29574322 ("usbip: vudc: Add vudc_transfer") Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Cc: stable <stable@vger.kernel.org> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-for-v4.10' of ↵Greg Kroah-Hartman2016-11-181-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.10 merge window One big merge this time with a total of 166 non-merge commits. Most of the work, by far, is on dwc2 this time (68.2%) with dwc3 a far second (22.5%). The remaining 9.3% are scattered on gadget drivers. The most important changes for dwc2 are the peripheral side DMA support implemented by Synopsys folks and support for the new IOT dwc2 compatible core from Synopsys. In dwc3 land we have support for high-bandwidth, high-speed isochronous endpoints and some non-critical fixes for large scatter lists. Apart from these, we have our usual set of cleanups, non-critical fixes, etc.
| * usb: ip: remove unnecessary & operationFelipe Balbi2016-11-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | Now that usb_endpoint_maxp() only returns the lowest 11 bits from wMaxPacketSize, we can remove the & operation from this driver. Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | usbip: fix possibility of dereference by NULLL pointer in vhci_hcd.cNobuo Iwata2016-11-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes possibility of dereference by NULLL pointer in "[PATCH v5 1/3] usbip: vhci extension: modifications to vhci driver" which has been merged to 4.9-rc1. It occurs when a URB with pointer to invalid USB/IP device is enqueued in race condition against detach operation. A pointer was passed to vdev_to_vhci() before NULL check. In vdev_to_vhci(), there's a dereference by the pointer. This patch moves vdev_to_vhci() after NULL check of the pointer. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: usbip:checkpatch; fix bare use of unsignedJai Krishna2016-10-272-7/+7
|/ | | | | | | | This patch fixes the following checkpatch warning for usbip files WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Jai Krishna <rjk1024@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud