summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
Commit message (Collapse)AuthorAgeFilesLines
* USB: add siemens_mpi usb-serial "stub" driverGreg Kroah-Hartman2009-01-073-0/+86
| | | | | | | | | | | This driver got rescued from a few years ago and was requested to be added. So I cleaned it up, ported it to the latest kernel version and here it is. Cc: Thomas Hergenhahn <thomas.hergenhahn@suse.de> Cc: Emmanuele <iemmav@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add new opticon serial driverGreg Kroah-Hartman2009-01-073-0/+368
| | | | | | | | This is for the serial mode of the Opticon barcode scanner. Cc: Kees Stoop <kees.stoop@opticon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option: increase outgoing buffer size and numberGreg Kroah-Hartman2009-01-071-2/+2
| | | | | | | | This should speed up the option driver's upload speed quite a bit. It has been tested by a number of different people on different devices with success. Cc: Roland Wolters <roland.wolters@credativ.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: fix up urb->status usageGreg Kroah-Hartman2009-01-076-65/+68
| | | | | | | | Some of the usb-serial drivers are starting to use urb->status in ways they should not be doing. This fixes up some of them to prevent that. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: usb_debug: Make staticRoel Kluin2009-01-071-1/+1
| | | | | | | | Sparse asked whether these could be static. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: ipw.c: mark {__init|__exit} for usb_ipw_{init|exit}Qinghuang Feng2009-01-071-2/+2
| | | | | | | | mark {__init|__exit} for usb_ipw_{init|exit} () Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tty: Drop the lock_kernel in the private ioctl hookAlan Cox2009-01-025-8/+14
| | | | | | | | We don't need the BKL here any more so it can go. In a couple of spots the driver requirements are not clear so push the lock down into the driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tty: USB tty devices can block in tcdrain when unpluggedAlan Cox2009-01-021-0/+4
| | | | | | | | | | | | The underlying problem is that the device methods don't all correctly handle disconnected status and some keep reporting bytes pending which causes tcdrain to stall. When the cable is unplugged they are definitely gone, and as this is true for all USB cables we can fix it in the core usb serial code. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add device function for USB serial consoleKevin Hao2009-01-021-0/+13
| | | | | | | | | | | Add device funtion for usb serial console, so we can open /dev/console when we use a usb serial device as console. (Typecast removed as noted by Sergei Shtylyov) Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tty: Fix close races in USB serialAlan Cox2009-01-021-5/+10
| | | | | | | | | | | USB serial has always had races where the tty port usage count can hit zero during a receive event. The internal locking is a mutex so we can't use that in the IRQ handlers. With krefs we can tackle this differently but we still need to be careful. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sierra: Fix formattingAlan Cox2009-01-021-1/+1
| | | | | | | | | | | | | | | | Andrew Morton wrote: in drivers/usb/serial/sierra.c: } else { if (urb->actual_length) { + tty = tty_port_tty_get(&port->port); tty_buffer_request_room(tty, urb->actual_length); it's missing a tab. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole displayMike Provencher2008-12-172-0/+5
| | | | | | | | | | | Add id for the Hewlett-Packard LD220-HP POS pole display. Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard Signed-off-by: Mike Provencher <mike.provencher@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: set correct configuration in probe of ti_usb_3410_5052Oliver Neukum2008-12-171-52/+3
| | | | | | | | | This driver transfers firmware. It may just as well set the correct configuration. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add 5372:2303 to pl2303Matthew Arnold2008-12-172-0/+5
| | | | | | | | | | | | This patch adds the "Superial" USB-Serial converter to pl2303 so that it is detected, by the correct driver. Adds the relevant vendor:product (5372:2303) to the device tables in pl2303.c & pl2303.h. The patch has been tested against 2.6.24-22-generic. Signed-off-by: Matthew D Arnold <matthew.arnold-1@uts.edu.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: Adding Ewert Energy System's CANdapter PIDAndrew Ewert2008-12-172-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | The following patch adds in the USB PID for Ewert Energy System's CANdapter device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio device driver. The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu. Relevant output from /proc/bus/usb/devices (With patch installed): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=9f80 Rev= 6.00 S: Manufacturer=Ewert Energy Systems S: Product=CANdapter S: SerialNumber=A6RGB3Z3 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Andrew Ewert <andrew@ewertenergy.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: tty: SprogII DCC controller identifiersAlan Cox2008-12-172-0/+4
| | | | | | | | | | | | | | Someone on rmweb reminded me this had been overlooked from ages ago.. Add the identifiers for the Sprog II USB. This is a DCC control interface using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been using it with insmod options for ages, this just puts it into the driver data. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Fix incorrect use of loose in tty/serial driversNick Andrew2008-12-051-1/+1
| | | | | | | | | | [Folded together as one diff from 3] It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add kref to fake tty used by USB consoleKevin Hao2008-12-011-0/+1
| | | | | | | | | | We alloc a fake tty in usb serial console setup function. we should init the tty's kref otherwise we will face WARN_ON after following invoke of tty_port_tty_set --> tty_kref_get. Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: serial: add more Onda device ids to option driverGreg Kroah-Hartman2008-11-301-0/+35
| | | | | | | | Thanks to Domenico Riccio for pointing these out. Cc: Domenico Riccio <domenico.riccio@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ACE1001 patch for cp2101.cM Kondrin2008-11-191-0/+1
| | | | | | | | | The patch which adds IDs for AKTAKOM USB->RS232 cable (http://www.aktakom.ru/product/kio/ace-1001.htm) is attached. From: M Kondrin <mkondrin@hppi.troitsk.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* + usb-serial-cp2101-add-enfora-gsm2228.patch added to -mm treeDamir N Abdullin2008-11-131-0/+1
| | | | | | | | | | Enfora GSM2228 based on Cygnal Integrated Products chip uses the same cp2101 driver. Signed-off-by: Damir N Abdullin <damir@mimas.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: CP2101 Add device ID for AMB2560Craig Shelley2008-11-131-0/+1
| | | | | | | | This patch adds the device vendor and product IDs for Amber Wireless AMB2560 Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add YISO u893 usb modem vendor and product IDs to option driverLeslie Watter2008-11-131-0/+6
| | | | | | | | | | This patch adds YISO u893 usb modem vendor and product ID to option.c. I had a better experience using this modification and the same system. Signed-off-by: Leslie Harlley Watter <leslie@watter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tty: trivial - fix up email addresses in tty related stuffAlan Cox2008-11-111-1/+1
| | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tty: Fix USB kref leakAlan Cox2008-10-301-0/+1
| | | | | | | | | | When we close we must clear the extra reference we got when we read port->tty. Setting the port tty NULL will clear the kref held by the driver but not the one we obtained ourselves while doing the lookup. Signed-off-by: Alan Cox <alan@redhat.com> Tested-by: Helge Hafting <helge.hafting@aitel.hist.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: support Huawei data card product IDsfangxiaozhi2008-10-221-0/+94
| | | | | | | | | | | | | | | | | | | | In this patch, we want to do one thing: add more Huawei product IDs into the USB driver. Then it can support more Huawei data card devices. So to declare the unusual device for new Huawei data card devices in unusual_devs.h and to declare more new product IDs in option.c. To modify the data value and length in the function of usb_stor_huawei_e220_init in initializers.c That's because based on the USB standard, while sending SET_FETURE_D to the device, it requires the corresponding data to be zero, and its sending length also must be zero. In our old solution, it can be compatible with our WCDMA data card devices, but can not support our CDMA data card devices. But in this new solution, it can be compatible with all of our data card devices. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add ZTE MF626 USB GSM modem entryMikhail Gusarov2008-10-221-0/+2
| | | | | | Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove use of err() in drivers/usb/serialGreg Kroah-Hartman2008-10-1721-243/+346
| | | | | | | | | err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove info() macro from usb/serial driversGreg Kroah-Hartman2008-10-1732-63/+96
| | | | | | | USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option: add Pantech cardsDan Williams2008-10-171-0/+9
| | | | | | | | Add some Pantech mobile broadband IDs. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Option / AnyData new modem, same IDJon K Hellan2008-10-171-1/+1
| | | | | | | | The AnyData ADU-310 series of wireless modems uses the same product ID as the ADU-E100 series. Signed-off-by: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ti_usb_3410_5052: removed duplicated includeHuang Weiyi2008-10-171-1/+0
| | | | | | | | | Removed duplicated #include <linux/firmware.h> in drivers/usb/serial/ti_usb_3410_5052.c. Signed-off-by: Huang Weiyi <hwy@cn.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB Serial: Sierra: debug message fixKevin Lloyd2008-10-171-31/+38
| | | | | | | | | This patch moves dbg calls to dev_dbg where possible. It also fixes some issues with a previous submission aiming to do the same thing. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: fix 'product' parameter descriptionPaulius Zaleckas2008-10-171-1/+1
| | | | | | Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add Oceanic product ID to ftdi_sioVladimir Vukicevic2008-10-172-0/+6
| | | | | | | | | | | | | | Add Oceanic PID to ftdi_sio driver Oceanic dive computers (such as the VT3 -- http://www.oceanicworldwide.com/p_computers_vt3.html) all use an onboard FTDI serial converter, with the FTDI vid and a PID of 0xf460. The attached patch adds that pid to ftdi_sio; driver connects to my VT3 after that. Signed-off-by: Vladimir Vukicevic <vladimir@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option.c remove duplicate device ids now supported in hso.cDenis Joseph Barrow2008-10-171-22/+0
| | | | | | | | Remove duplicate device ids which are now supported by drivers/usb/net/hso.c Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option: add Ericsson F3507g and Dell 5530Dan Williams2008-10-171-0/+6
| | | | | | | | Add a few more mobile broadband cards. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tty: usb-serial krefsAlan Cox2008-10-1335-208/+269
| | | | | | | | | | | | | Use kref in the USB serial drivers so that we don't free tty structures from under the URB receive handlers as has historically been the case if you were unlucky. This also gives us a framework for general tty drivers to use tty_port objects and refcount. Contains two err->dev_err changes merged together to fix clashes in the -next tree. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ftdi: A few errors are err() that should be debug which causes much spewageAlan Cox2008-10-131-3/+3
| | | | | | | Fixes #10783 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* usb: fix pl2303 initializationJason Wessel2008-10-131-11/+0
| | | | | | | | | | | | | | | | | This patch removes the private check for the termios_initialized for the pl2303 usb driver. It forced the baud to 9600 on the first call to pl2303_set_termios() Based on the tty changes in the 2.6.27 kernel, the termios passed to the *_set_termios functions is always populated the first time. This means there is no need to privately initialize the settings the first time, and doing so will not allow the use of the kernel parameter "console=ttyUSB0,115200" as an example. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix oti6858 debug levelScott Ashcroft2008-10-131-4/+0
| | | | | | | | | | | | | For some reason the oti6858 driver undefines and redefines the dbg macro. This makes it spew debugging messages at KERN_INFO instead of KERN_DEBUG. This patch removes the undef and define making the driver log like every other USB serial driver. Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* usb: ftdi_sio: add support for Domintell devicesGaetan Carlier2008-09-232-0/+6
| | | | | | | | | | | | Support for Domintell devices (FTDI FT232BM based) : DGQG and DUSB01 module. PIDs were missing. Signed-off-by: Gaetan Carlier <gcpatch@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB Serial: Sierra: Add MC8785 VID/PIDKevin Lloyd2008-09-231-0/+1
| | | | | | | | Add another MC8785 VID/PID Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: add ZTE CDMA Tech id to option driverOtavio Salvador2008-09-231-0/+2
| | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4)Jaroslav Kysela2008-09-232-0/+2
| | | | | | | | USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4) Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb serial: ti_usb_3410_5052 obviously broken by firmware changesChris Adams2008-09-231-1/+1
| | | | | | | | | | | | | | While making some other changes to ti_usb_3410_5052, I noticed that the changes made to move the firmware loading to a separate function are broken (in ti_download_firmware(), status is set to -ENOMEM and never changed). This means the driver will never initialize the device properly. It looks like status was supposed to get the result of ti_do_download(). Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: SERIAL CP2101 add device IDsCraig Shelley2008-09-231-0/+3
| | | | | | Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-serial: Add Siemens EF81 to PL-2303 hack triggersAndreas Bombe2008-09-231-1/+3
| | | | | | | | This hardware needs the pl2303 hack in order to work properly :( Signed-off-by: Andreas Bombe <aeb@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Correct Sierra Wireless USB EVDO Modem Device IDTony Murray2008-09-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I was trying to figure out why my device wasn't supported by the drivers/usb/serial/sierra.c driver, while looking throught the device IDs I spotted what I believe to be a typo in the device IDs. Please apply the following patch If you look down further, there is another HP wireless broadband card, which has a vendor ID of 03f0, like my device. Below is my "lsusb -v -d 03f0:1b1d". Bus 001 Device 005: ID 03f0:1b1d Hewlett-Packard Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x03f0 Hewlett-Packard idProduct 0x1b1d bcdDevice 0.01 iManufacturer 1 HP iProduct 2 HP ev2200 1xEV-DO Broadband Wireless Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 67 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 7 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 3 Data Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 128 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) From: Tony Murray <murraytony@gmail.com> Cc: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB Serial: Sierra: Device addition & version revKevin Lloyd2008-09-231-4/+5
| | | | | | | | This patch adds devices to the sierra driver and rev's the driver version. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud