summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/mos7720.c
Commit message (Collapse)AuthorAgeFilesLines
* USB: mos7720: delete parportSudip Mukherjee2016-06-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | parport subsystem has introduced parport_del_port() to delete a port when it is going away. Without parport_del_port() the registered port will not be unregistered. To reproduce and verify the error: Command to be used is : ls /sys/bus/parport/devices 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and the command still shows "parport0". 4) Attach the device again and we get "parport1". With the patch applied: 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and there is no output as "parport0" is now removed. 4) Attach device again to get "parport0" again. Cc: <stable@vger.kernel.org> # 4.2+ Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: Use termios c_*flag macrosPeter Hurley2016-01-281-2/+2
| | | | | | | | | | | | Expressions of the form "tty->termios.c_*flag & FLAG" are more clearly expressed with the termios flags macros, I_FLAG(), C_FLAG(), O_FLAG(), and L_FLAG(). Convert treewide. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: rename registersSudip Mukherjee2015-07-061-115/+138
| | | | | | | | | | | Some of the register names defined here are matching with registers defined in other places. Like DCR is defined here and DCR is also a register in mn10300 architecture. So when we are building this with mn10300, build fails. To avoid we rename all the registers. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: mos7720: delete some unneeded codeDan Carpenter2014-12-021-4/+0
| | | | | | | | The "status" is uninitialized so this creates a static checker warning. But it's harmless, we can just delete it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: replace unnecessary atomic allocationsJohan Hovold2014-11-031-2/+2
| | | | | | | Use GFP_KERNEL instead of GFP_ATOMIC for allocations in set_termios and port-setting helper which both may and do sleep. Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: add missing newlines to dev_<level> messages.Johan Hovold2014-03-121-6/+6
| | | | | | | | | Add missing newlines to dev_<level> messages. Also make some messages less verbose where appropriate. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
* usb: delete non-required instances of include <linux/init.h>Paul Gortmaker2014-01-081-1/+0
| | | | | | | | | | None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: correct spelling mistakes in commentsRahul Bedarkar2014-01-031-4/+4
| | | | | Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: remove redundant OOM messagesJohan Hovold2014-01-031-19/+7
| | | | | | | | | Remove redundant error messages on allocation failures, which have already been logged. Cc: Joe Perches <joe@perches.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: clean up ioctl debuggingJohan Hovold2014-01-031-2/+0
| | | | | | | | Remove redundant ioctl debugging from subdrivers. The ioctl request code has already been logged by usb-serial core. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang2013-11-151-1/+1
| | | | | | | | | | | | Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: mos7720: fix big-endian control requestsJohan Hovold2013-08-191-2/+2
| | | | | | | | | | Fix endianess bugs in parallel-port code which caused corrupt control-requests to be issued on big-endian machines. Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: use GFP_ATOMIC under spinlockDan Carpenter2013-08-191-1/+1
| | | | | | | | | | The write_parport_reg_nonblock() function shouldn't sleep because it's called with spinlocks held. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: fix broken control requestsJohan Hovold2013-08-141-7/+14
| | | | | | | | | | | The parallel-port code of the drivers used a stack allocated control-request buffer for asynchronous (and possibly deferred) control requests. This not only violates the no-DMA-from-stack requirement but could also lead to corrupt control requests being submitted. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: make minor allocation dynamicGreg Kroah-Hartman2013-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | This moves the allocation of minor device numbers from a static array to be dynamic, using the idr interface. This means that you could potentially get "gaps" in a minor number range for a single USB serial device with multiple ports, but all should still work properly. We remove the 'minor' field from the usb_serial structure, as it no longer makes any sense for it (use the field in the usb_serial_port structure if you really want to know this number), and take the fact that we were overloading a number in this field to determine if we had initialized the minor numbers or not, and just use a flag variable instead. Note, we still have the limitation of 255 USB to serial devices in the system, as that is all we are registering with the TTY layer at this point in time. Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ports: add minor and port numberGreg Kroah-Hartman2013-06-101-19/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The usb_serial_port structure had the number field, which was the minor number for the port, which almost no one really cared about. They really wanted the number of the port within the device, which you had to subtract from the minor of the parent usb_serial_device structure. To clean this up, provide the real minor number of the port, and the number of the port within the serial device separately, as these numbers might not be related in the future. Bonus is that this cleans up a lot of logic in the drivers, and saves lines overall. Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -- drivers/staging/serqt_usb2/serqt_usb2.c | 21 +++-------- drivers/usb/serial/ark3116.c | 2 - drivers/usb/serial/bus.c | 6 +-- drivers/usb/serial/console.c | 2 - drivers/usb/serial/cp210x.c | 2 - drivers/usb/serial/cypress_m8.c | 4 +- drivers/usb/serial/digi_acceleport.c | 6 --- drivers/usb/serial/f81232.c | 5 +- drivers/usb/serial/garmin_gps.c | 6 +-- drivers/usb/serial/io_edgeport.c | 58 ++++++++++++-------------------- drivers/usb/serial/io_ti.c | 21 ++++------- drivers/usb/serial/keyspan.c | 29 +++++++--------- drivers/usb/serial/metro-usb.c | 4 +- drivers/usb/serial/mos7720.c | 37 +++++++++----------- drivers/usb/serial/mos7840.c | 52 +++++++++------------------- drivers/usb/serial/opticon.c | 2 - drivers/usb/serial/pl2303.c | 2 - drivers/usb/serial/quatech2.c | 7 +-- drivers/usb/serial/sierra.c | 2 - drivers/usb/serial/ti_usb_3410_5052.c | 10 ++--- drivers/usb/serial/usb-serial.c | 7 ++- drivers/usb/serial/usb_wwan.c | 2 - drivers/usb/serial/whiteheat.c | 20 +++++------ include/linux/usb/serial.h | 6 ++- 24 files changed, 133 insertions(+), 180 deletions(-)
* USB: mos7720: fix hardware flow controlJohan Hovold2013-06-041-1/+1
| | | | | | | | | The register access to enable hardware flow control depends on the device port number and not the port minor number. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: fix message timeoutsJohan Hovold2013-05-291-3/+3
| | | | | | | | | The control and bulk-message timeouts are specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: fix DMA to stackJohan Hovold2013-05-291-3/+14
| | | | | | | | | The read_mos_reg function is called with stack-allocated buffers, which must not be used for control messages. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-3.10-rc1' of ↵Linus Torvalds2013-04-291-65/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB pull request for 3.10-rc1. Lots of USB patches here, the majority being USB gadget changes and USB-serial driver cleanups, the rest being ARM build fixes / cleanups, and individual driver updates. We also finally got some chipidea fixes, which have been delayed for a number of kernel releases, as the maintainer has now reappeared. All of these have been in linux-next for a while" * tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits) USB: ehci-msm: USB_MSM_OTG needs USB_PHY USB: OHCI: avoid conflicting platform drivers USB: OMAP: ISP1301 needs USB_PHY USB: lpc32xx: ISP1301 needs USB_PHY USB: ftdi_sio: enable two UART ports on ST Microconnect Lite usb: phy: tegra: don't call into tegra-ehci directly usb: phy: phy core cannot yet be a module USB: Fix initconst in ehci driver usb-storage: CY7C68300A chips do not support Cypress ATACB USB: serial: option: Added support Olivetti Olicard 145 USB: ftdi_sio: correct ST Micro Connect Lite PIDs ARM: mxs_defconfig: add CONFIG_USB_PHY ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY usb: phy: remove exported function from __init section usb: gadget: zero: put function instances on unbind usb: gadget: f_sourcesink.c: correct a copy-paste misnomer usb: gadget: cdc2: fix error return code in cdc_do_config() usb: gadget: multi: fix error return code in rndis_do_config() usb: gadget: f_obex: fix error return code in obex_bind() USB: storage: convert to use module_usb_driver() ...
| * USB: mos7720: always disable uart on closeJohan Hovold2013-03-251-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | Always try to disable the uart on close. Since the switch to tty ports, close will be called as part of shutdown before disconnect returns. Hence there is no need to check the disconnected flag, and we can put devices in disabled states also on driver unbind. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: mos7720: remove broken get_icount and TIOCMIWAITJohan Hovold2013-03-251-55/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove broken get_icount and TIOCMIWAIT support. The driver has an icount structure but it is never been updated which makes get_icount rather pointless and causes TIOCMIWAIT to always return -EIO. Note that the TIOCMIWAIT implementation has always been broken and would not work even if icount support was added as it does not wait for the modem status to change (does not use a work queue at all). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: add tty_port_tty_wakeup helperJiri Slaby2013-03-181-6/+2
|/ | | | | | | | | | | | It allows for cleaning up on a considerable amount of places. They did port_get, wakeup, kref_put. Now the only thing needed is to call tty_port_tty_wakeup which does exactly that. One exception is ifx6x60 where tty_wakeup was open-coded. We now call tty_wakeup properly there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* TTY: switch tty_flip_buffer_pushJiri Slaby2013-01-151-5/+2
| | | | | | | | | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* TTY: switch tty_insert_flip_stringJiri Slaby2013-01-151-1/+1
| | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_string this time. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: remove driver version informationJohan Hovold2012-10-311-4/+0
| | | | | | | | | | | Remove all MODULE_VERSION macros and driver-version information (except for garmin_gps which uses it in a status reply). It is the kernel version that matters and not some private version scheme which rarely even gets updated. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: fix port-data memory leakJohan Hovold2012-10-251-30/+32
| | | | | | | | | | | | | | | | | | Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that this patch also fixes a second port-data memory leak in the error path of attach, should parallel-port initialisation fail. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds2012-10-011-149/+82
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull USB changes from Greg Kroah-Hartman: "Here is the big USB pull request for 3.7-rc1 There are lots of gadget driver changes (including copying a bunch of files into the drivers/staging/ccg/ directory so that the other gadget drivers can be fixed up properly without breaking that driver), and we remove the old obsolete ub.c driver from the tree. There are also the usual XHCI set of updates, and other various driver changes and updates. We also are trying hard to remove the old dbg() macro, but the final bits of that removal will be coming in through the networking tree before we can delete it for good. All of these patches have been in the linux-next tree. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up several annoying - but fairly mindless - conflicts due to the termios structure having moved into the tty device, and often clashing with dbg -> dev_dbg conversion. * tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits) USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc USB: uas: fix gcc warning USB: uas: fix locking USB: Fix race condition when removing host controllers USB: uas: add locking USB: uas: fix abort USB: uas: remove aborted field, replace with status bit. USB: uas: fix task management USB: uas: keep track of command urbs xhci: Intel Panther Point BEI quirk. powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support Revert "usb : Add sysfs files to control port power." USB: serial: remove vizzini driver usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems Increase XHCI suspend timeout to 16ms USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq USB: sierra_ms: don't keep unused variable fsl/usb: Add support for USB controller version 2.4 USB: qcaux: add Pantech vendor class match ...
| * USB: Serial: mos7720.c: remove debug module parameterGreg Kroah-Hartman2012-09-181-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: serial: remove debug parameter from usb_serial_debug_data()Greg Kroah-Hartman2012-09-181-1/+1
| | | | | | | | | | | | | | | | We should use dev_dbg() for usb_serial_debug_data() like all of the rest of the usb-serial drivers use, so remove the debug parameter as it's not needed. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: serial: mos7720.c: remove dbg() usageGreg Kroah-Hartman2012-09-141-141/+79
| | | | | | | | | | | | | | | | | | | | | | | | dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: mos7720: fix to use list_for_each_entry_safe() when delete itemsWei Yongjun2012-09-051-2/+2
| | | | | | | | | | | | | | | | | | | | Since we will be removing items off the list using list_del() we need to use a safer version of the list_for_each_entry() macro aptly named list_for_each_entry_safe(). We should use the safe macro if the loop involves deletions of items. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | tty: move the termios object into the ttyAlan Cox2012-07-161-7/+7
|/ | | | | | | | | | | | This will let us sort out a whole pile of tty related races. The alternative would be to keep points and refcount the termios objects. However 1. They are tiny anyway 2. Many devices don't use the stored copies 3. We can remove a pty special case Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: rework usb_serial_register/deregister_drivers()Greg Kroah-Hartman2012-05-081-9/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: remove usb_serial_disconnect call in all driversGreg Kroah-Hartman2012-05-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: remove usb_serial_probe call in all driversGreg Kroah-Hartman2012-05-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720.c: remove dbg() tracing callsGreg Kroah-Hartman2012-05-031-20/+14
| | | | | | | | | | | dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: mos7720.c: use module_usb_serial_driverGreg Kroah-Hartman2012-02-281-21/+1
| | | | | | | | | | | | This converts the mos7720.c driver to use the module_usb_serial_driver() call instead of having to have a module_init/module_exit function, saving a lot of duplicated code. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-serial: use new registration API in [k-m]* driversAlan Stern2012-02-241-23/+9
| | | | | | | | | | | This patch (as1526) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: keyspan, kl5kusb105, kobil_sct, mct_u232, mos7720, mos7840, and moto_modem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: use dev_err_console in custom write pathsJohan Hovold2012-02-101-2/+2
| | | | | | | | | | Use dev_err_console in write paths for devices which can be used as a console but do not use the generic write implementation. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* module_param: make bool parameters really bool (drivers & misc)Rusty Russell2012-01-131-1/+1
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* USB: serial: remove unnecessary reinitialisations of urb->devJohan Hovold2011-11-151-5/+0
| | | | | | | | | | | | | | | | Remove unnecessary reinitialisations of urb->dev before each submission, which were based on the (no longer valid) assumption that serial->dev will be set to NULL on close. Compile-only tested. Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Support Department <support@connecttech.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: mos7720: remove unused codeJohan Hovold2011-11-151-3/+0
| | | | | | | Remove variable port0 from open as it is not used. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: mos7720: remove incorrect read-urb checkJohan Hovold2011-11-151-10/+0
| | | | | | | | | | Remove incorrect and unnecessary check for port->read_urb which is not set to NULL, contrary to what seems to be assumed, when urb is killed. Compile only-tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: remove duplicate returnsDan Carpenter2011-08-101-1/+0
| | | | | | | | This small untidiness with two returns in a row was copy and pasted into mos7720.c and mos7840.c. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'tty-next' of ↵Linus Torvalds2011-03-161-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits) pch_uart: reference clock on CM-iTC pch_phub: add new device ML7213 n_gsm: fix UIH control byte : P bit should be 0 n_gsm: add a documentation serial: msm_serial_hs: Add MSM high speed UART driver tty_audit: fix tty_audit_add_data live lock on audit disabled tty: move cd1865.h to drivers/staging/tty/ Staging: tty: fix build with epca.c driver pcmcia: synclink_cs: fix prototype for mgslpc_ioctl() Staging: generic_serial: fix double locking bug nozomi: don't use flush_scheduled_work() tty/serial: Relax the device_type restriction from of_serial MAINTAINERS: Update HVC file patterns tty: phase out of ioctl file pointer for tty3270 as well tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile pch_uart: Fix DMA channel miss-setting issue. pch_uart: fix exclusive access issue pch_uart: fix auto flow control miss-setting issue pch_uart: fix uart clock setting issue pch_uart : Use dev_xxx not pr_xxx ... Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied twice, then changes to the same area in one branch)
| * tty: remove filp from the USB tty ioctlsAlan Cox2011-02-171-1/+1
| | | | | | | | | | | | | | | | We don't use it so we can trim it from here as we try and stamp the file object dependencies out of the serial code. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * tiocmset: kill the file pointer argumentAlan Cox2011-02-171-1/+1
| | | | | | | | | | | | | | | | Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * tiocmget: kill off the passing of the struct fileAlan Cox2011-02-171-2/+2
| | | | | | | | | | | | | | | | | | | | We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: serial: mos7720: Fix possible null pointer dereferenceHuzaifa Sidhpurwala2011-02-251-1/+2
|/ | | | | Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud