summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reasonOlaf Hering2005-11-091-1/+0
| | | | | | | | | | | | | | | | | | | | | This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [USB]: Make early handoff a final fixup instead of a header one.David S. Miller2005-11-041-1/+1
| | | | | | | | At header fixup time, it is not yet legal to ioremap() PCI device registers, yet that is what this quirk code needs to do. Signed-off-by: David S. Miller <davem@davemloft.net>
* Don't touch USB controller IO registers when they are disabledLinus Torvalds2005-10-311-0/+23
| | | | | | | | | The USB "handoff" code is an early PCI quirk to make sure we own the USB controller (as opposed to the BIOS/SMM). But if the controller isn't even enabled yet, don't try to access it. Acked-by: Paul Mackerras <paulus@samba.org> (who had an alternate patch) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds2005-10-319-0/+14
|\ | | | | | | Manual #include fixups for clashes - there may be some unnecessary
| * Create platform_device.h to contain all the platform device details.Russell King2005-10-299-1/+14
| | | | | | | | | | | | | | | | Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] fix missing includesTim Schmielau2005-10-303-0/+6
|/ | | | | | | | | | | | | | | | | | | | | I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* USB: fix up some odd parts due to partial mergesGreg Kroah-Hartman2005-10-281-2/+2
| | | | | | Thanks to Andrew for doing the hard work on this. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: Always do usb-handoffAlan Stern2005-10-281-43/+3
| | | | | | | | | | | | This revised patch (as586b) makes usb-handoff permanently true and no longer a kernel boot parameter. It also removes the piix3_usb quirk code; that was nothing more than an early version of the USB handoff code (written at a time when Intel's PIIX3 was about the only motherboard with USB support). And it adds identifiers for the three PCI USB controller classes to pci_ids.h. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: add owner initialisation to host driversBen Dooks2005-10-288-0/+8
| | | | | | | | | Add .owner initialisation to the device drivers in drivers/usb/host so that when built as module the device_driver refers to the owning module Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: S3C2410 OHCI - add driver owner fieldBen Dooks2005-10-281-0/+1
| | | | | | | | | Initialise the .owner field of the driver with the module that owns it, to aid in linking drivers to modules. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Fix hcd->state assignments in uhci-hcdAlan Stern2005-10-281-3/+3
| | | | | | | | | | This patch (as581) changes the assignments to hcd->state in the uhci-hcd driver. It fixes part of bugzilla entry #5227. The problem was revealed by David's large suite of USB suspend/resume patches; this patch should go to Linus at the same time those do. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: Improve handling of iso TDsAlan Stern2005-10-281-13/+26
| | | | | | | | | | | | | | | | | | | | | The uhci-hcd driver is fairly lax about the way it handles isochronous transfers. This patch (as579) improves it in three respects: TDs for a new URB aren't added to the schedule until all of them have been allocated. This way there's no risk of the controller executing some of them when an allocation fails. TDs for an unlinked URB are removed from the schedule as soon as the URB is unlinked, rather than waiting until the URB is given back. This way there's no risk of the controller still executing a TD after the URB completes. The urb->error_count values are now reported correctly. Although since they aren't used in any drivers except for debug messages in the system log, probably nobody cares. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspendAlan Stern2005-10-2814-41/+41
| | | | | | | | | | | | | | | | This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: unify BIOS handoff and driver reset codeAlan Stern2005-10-282-112/+106
| | | | | | | | | | | | | | This patch (as574) updates the PCI BIOS usb-handoff code for UHCI controllers, making it work like the reset routines in uhci-hcd. This allows uhci-hcd to drop its own routines in favor of the new ones (code-sharing). Once the patch is merged we can turn the usb-handoff option on permanently, as far as UHCI is concerned. OHCI and EHCI may still have some issues. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: UHCI: Spruce up some commentsAlan Stern2005-10-281-42/+49
| | | | | | | | | | | | This patch (as570) changes some comments in the uhci-hcd header file and removes an unused declaration (something I forgot to erase in an earlier patch). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/uhci-hcd.h | 91 +++++++++++++++++++++++--------------------- 1 file changed, 49 insertions(+), 42 deletions(-)
* [PATCH] ISP116x PM updatesDavid Brownell2005-10-282-26/+4
| | | | | | | | | | | | | | This makes the isp116x driver stop using usb_suspend_device() and usb_resume_device() ... usbcore now calls to the root hub methods, removing the need for this. It also switches from keventd to khubd for remote wakeup. (Compile tested.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/isp116x-hcd.c | 29 ++++------------------------- drivers/usb/host/isp116x.h | 1 - 2 files changed, 4 insertions(+), 26 deletions(-)
* [PATCH] UHCI PM updatesDavid Brownell2005-10-281-9/+0
| | | | | | | | | | This removes suspend and resume path recursion in UHCI. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/uhci-hcd.c | 9 --------- 1 file changed, 9 deletions(-)
* [PATCH] update PCI early-handoff handling for OHCIDavid Brownell2005-10-281-4/+18
| | | | | | | | | | | | | | | | | | | | The PCI "early usb handoff" quirk logic didn't work like "ohci-hcd" ... This patch makes it do so by: - Resetting the controller after kicking BIOS off, matching the normal "chip in hardware reset" startup mode; - Reporting any BIOS that borks this simple handoff; it's likely got a few other surprises for us too. - Ignoring that handoff on HPPA; The diagnostic string is mostly shared with EHCI, saving a few bytes. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/pci-quirks.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-)
* [PATCH] OHCI PM updatesDavid Brownell2005-10-287-94/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This simplifies the OHCI root hub suspend logic: - Uses new usbcore root hub calls to make autosuspend work again: * Uses a newish usbcore root hub wakeup mechanism, making requests to khubd not keventd. * Uses an even newer sibling suspend hook. - Expect someone always made usbcore call ohci_hub_suspend() before bus glue fires; and that ohci_hub_resume() is only called after that bus glue ran. Previously, only CONFIG_USB_SUSPEND promised those things. (Includes updates to PCI and OMAP bus glue.) - Handle a not-noticed-before special case during resume from one of the swsusp snapshots when using "usb-handoff": the controller isn't left in RESET state. (A bug to fix in the usb-handoff code...) Also cleans up a minor debug printk glitch, and switches an mdelay over to an msleep (how did that stick around for so long?). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ohci-dbg.c | 4 ---- drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 42 ++++++++++++------------------------------ drivers/usb/host/ohci-mem.c | 1 - drivers/usb/host/ohci-omap.c | 36 ++++++++++++------------------------ drivers/usb/host/ohci-pci.c | 40 ++++++++-------------------------------- drivers/usb/host/ohci.h | 1 - 7 files changed, 33 insertions(+), 93 deletions(-)
* [PATCH] all HCDs provide root hub suspend/resume methodsDavid Brownell2005-10-285-0/+13
| | | | | | | | | | | | | | | | | | | | | This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
* [PATCH] EHCI, split out PCI glueMatt Porter2005-10-283-463/+489
| | | | | | | | | | | | | | | This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
* [PATCH] USB: UHCI: Split apart the physical and logical framelist arraysAlan Stern2005-10-284-28/+44
| | | | | | | | | | | This patch (as563) splits the physical and logical framelist arrays in uhci-hcd into two separate pieces. This will allow slightly better memory utilization, since each piece is no larger than a single page whereas before the whole thing was a little bigger than two pages. It also allows the logical array to be allocated in non-DMA-coherent memory. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: UHCI: Remove unused fields and unneeded tests for NULLAlan Stern2005-10-284-43/+10
| | | | | | | | | | | | | This patch (as562) removes from the uhci-hcd driver a few unused fields and some unnecessary tests against NULL and assignments to NULL. In fact it wasn't until fairly recently that the tests became unnecessary. Before last winter it was possible that the driver's stop() routine would get called even if the start() routine returned an error, but now that can't happen. Hence there's no longer any need to check for partial initialization. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] remove some USB_SUSPEND dependenciesDavid Brownell2005-10-288-11/+10
| | | | | | | | | | | | | | | | | | | | This simplifies some of the PM-related #ifdeffing by recognizing that USB_SUSPEND depends on PM. Also, OHCI drivers were often testing for USB_SUSPEND when they should have tested just PM. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 2 ++ drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 4 ++-- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- drivers/usb/host/ohci-ppc-soc.c | 4 ++-- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 3 +-- drivers/usb/host/ohci-sa1111.c | 2 +- 9 files changed, 12 insertions(+), 11 deletions(-)
* [PATCH] remove usb_suspend_device() parameterDavid Brownell2005-10-283-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes the extra usb_suspend_device() parameter. The original reason to pass that parameter was so that this routine could suspend any active children. A previous patch removed that functionality ... leaving no reason to pass the parameter. A close analogy is pci_set_power_state, which doesn't need a pm_message_t either. On the internal code path that comes through the driver model, the parameter is now used to distinguish cases where USB devices need to "freeze" but not suspend. It also checks for an error case that's accessible through sysfs: attempting to suspend a device before its interfaces (or for hubs, ports). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 34 +++++++++++++++++++++------------- drivers/usb/core/usb.c | 23 +++++++++++++++++++++-- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- include/linux/usb.h | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-)
* [PATCH] USB: move handoff codeDavid Brownell2005-10-282-2/+275
| | | | | | | | | | | | | | | | | | | | | This moves the PCI quirk handling for USB host controllers from the PCI directory to the USB directory. Follow-on patches will need to: (a) merge these copies with the originals in the HCD reset methods. they don't wholly agree, despite doing the very same thing; and (b) eventually change it so "usb-handoff" is the default, to help get more robust USB/BIOS/input/... interactions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/Makefile | 2 drivers/pci/quirks.c | 253 --------------------------------------- drivers/usb/Makefile | 1 drivers/usb/host/Makefile | 5 drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-)
* [PATCH] USB: ehci.patch (earlier irq disable)David Brownell2005-10-281-0/+8
| | | | | | | | | | | This tweaks the EHCI reboot notifier to also halt the EHCI controller, and makes that halt code force IRQs off. Both should always have been done. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 8 ++++++++ 1 file changed, 8 insertions(+)
* Merge ../bleed-2.6Greg KH2005-10-289-20/+20
|\
| * [PATCH] gfp_t: drivers/usbAl Viro2005-10-289-20/+20
| | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King2005-10-284-28/+10
|/ | | | | | | | | | | | | | | | In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] isp116x-hcd: fix handling of short transfersOlav Kongas2005-10-171-1/+2
| | | | | | | | | | | | | | | | | Increased use of scatter-gather by usb-storage driver after 2.6.13 has exposed a buggy codepath in isp116x-hcd, which was probably never visited before: bug happened only for those urbs, for which URB_SHORT_NOT_OK was set AND short transfer occurred. The fix attached was tested in 2 ways: (a) it fixed failing initialization of a flash drive with an embedded hub; (b) the fix was tested with 'usbtest' against a modified g_zero driver (on top of net2280), which generated short bulk IN transfers of various lengths including multiples and non-multiples of max_packet_length. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ARM] Don't include mach-types.h unnecessarilyRussell King2005-09-292-2/+0
| | | | | | | | | It's pointless to include mach-types.h if you're not going to use anything from it. These references were removed as a result of: grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Don't include asm/arch/hardware.h directlyRussell King2005-09-292-2/+0
| | | | | | | Since asm/hardware.h's only reason for existing is to include asm/arch/hardware.h, it's completely pointless to include both. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] USB: sl811-hcd minor fixesDavid Brownell2005-09-221-2/+14
| | | | | | | | | | | | | | | | | | | | | Three minor sl811-hcd fixes: - Elminate memory leak on one (rare) disable/shutdown path. - For periodic transfers that don't need to be scheduled, update urb->start_frame to represent the transfer phase correctly. - Report the (single) port as removable, by default. Since no drivers yet use start_frame or that part of the hub descriptor, only that leak is likely to ever matter. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> drivers/usb/host/sl811-hcd.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
* [PATCH] USB: OHCI, pxa27x OHCI port power tweaksDavid Brownell2005-09-121-38/+7
| | | | | | | | | | | | | | Now that it's in use on other boards, a bug in the original code needs fixing. There is no need for the PXA27x OHCI to set usb power during init, since the hub driver in usbcore handles that. Those platform-specific power control functions are also incorrect, and should therefore be removed. Add a check to clear the OTG pin hold bit until such times OTG is properly implemented. Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: OHCI relies less on NDP registerDavid Brownell2005-09-125-20/+25
| | | | | | | | | | | | | | Some OHCI implementations have differences in the way the NDP register (in roothub_a) reports the number of ports present. This patch allows the platform specific code to optionally supply the number of ports. The driver just reads the value at init (if not supplied) instead of reading it every time its needed (except for an AMD756 bug workaround). It also sets the value correctly for the ARM pxa27x architecture. Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: OHCI irq tweakDavid Brownell2005-09-121-0/+1
| | | | | | | | | | | | | | Evidently there are some boards which care a lot about this, but as a rule it's been hard to notice. OHCI_INTR_RD wasn't always cleared in the ohci irq handler. On some systems this means certain remote wakeup scenarios could seem to hang (in an interrupt storm, RD never clearing). From: "William Morrow" <William.Morrow@amd.com> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] drivers/usb: fix-up schedule_timeout() usageNishanth Aravamudan2005-09-122-4/+2
| | | | | | | | Description: Use schedule_timeout_{,un}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: EHCI workaround for NForce and mem > 2GBDavid Brownell2005-09-121-0/+17
| | | | | | | | | NVidia reports (via Mark Overby) that some of their EHCI controllers don't like certain data structure addresses beyond the 2GB mark. He provided an earlier version of this patch. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: EHCI port tweaksDavid Brownell2005-09-123-13/+23
| | | | | | | | | | | | | | | | | | | | | | | | | One change may improve some S1 or S3 resume cases, and the other seems mostly to explain some strange state "lsusb" would show. Two fixes: - On resume, don't think about resuming any unpowered port, or resetting any port with OWNER set to the OHCI/UHCI companion. This will make some S1 and S3 resume scenarios work better. - PORT_CSC was not being cleared correctly in ehci_hub_status_data. This was visible at least through current versions of "lsusb", and might have caused some other hub related strangeness. The fix addresses all three write-to-clear bits, using the same approach that UHCI happens to use: a mask of bits that are cleared in most writes to that port status register. Original patch seems to have been from from William.Morrow@amd.com and this version (from David) finishes the write-to-clear changes. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB UHCI: remove the FSBR kernel timerAlan Stern2005-09-124-54/+32
| | | | | | | | | This patch (as558) removes from the UHCI driver a kernel timer used for checking Full Speed Bandwidth Reclamation (FSBR). The checking can be done during normal root-hub polling; it doesn't need a separate timer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] timer initialization cleanup: DEFINE_TIMERIngo Molnar2005-09-091-2/+2
| | | | | | | | | | Clean up timer initialization by introducing DEFINE_TIMER a'la DEFINE_SPINLOCK. Build and boot-tested on x86. A similar patch has been been in the -RT tree for some time. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6 Linus Torvalds2005-09-086-76/+53
|\
| * [PATCH] ehci: add tt_usecsdavid-b@pacbell.net2005-09-083-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | This adds the field tt_usecs to ehci_qh and ehci_iso_stream, and sets it appropriately when setting them up as periodic endpoints. It records the transation translator's think_time (added in last patch) plus the downstream (i.e. low or full speed) bustime of the transfer associated with each interrupt or iso frame, as calculated by usb_calc_bus_time. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] USB: remove include of asm/usb.h in ohci-ppc-soc.cDale Farnsworth2005-09-081-18/+4
| | | | | | | | | | | | | | | | | | | | | | ohci-ppc-soc.c provides for a platform-specific callback mechanism for when the HC is successfully probed or removed. It turned out that none of the 3 platforms using it need this facility. Also the required include/asm-ppc/usb.h has never been accepted. This patch removes the callback feature and the include of <asm/usb.h>. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] USB: Fix typo in ohci-ppc-soc.c: usb_hcd_put => usb_put_hcdDale Farnsworth2005-09-081-1/+1
| | | | | | | | | | Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] USB: S3C24XX port numbering fixBen Dooks2005-09-081-2/+2
| | | | | | | | | | | | | | | | | | | | Fix the port numbering confusion for the S3C24XX platform device information as reported by Rudy <rudyboy168@gmail.com> This patch ensurs that the the ports are numbered 0 and 1. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] USB: Switch isp116x-hcd over to root hub interruptOlav Kongas2005-09-081-13/+22
| | | | | | | | | | | | | | | | | | Switch isp116x-hcd over from root hub polling to interrupt. This change closes also a race that was present with the old polling scheme: status polling could happen in a time window, where root hub status bits were not stable. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] USB: isp116x-hcd: remove clock() and reset()Olav Kongas2005-09-081-28/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes support for user-provided platform-specific hardware reset and clock starting/stopping functions. Hardware reset was needed earlier as getting the software reset working was tricky due to the lack of documentation. Recently, a number of people using isp116x have said the software reset is working for them. I haven't heard of anybody using the clock starting/stopping. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] USB: isp116x-hcd: per-port overcurrent reportingOlav Kongas2005-09-081-0/+2
| | | | | | | | | | | | | | This patch sets the isp116x to report overcurrent always per-port. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud