summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/u132-hcd.c
Commit message (Collapse)AuthorAgeFilesLines
* USB: automatically enable RHSC interruptsAlan Stern2008-08-211-11/+0
| | | | | | | | | | | | | | | | | This patch (as1069c) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb dev_name() instead of dev->bus_idKay Sievers2008-07-211-1/+1
| | | | | | | | The bus_id field is going away, use the dev_name() function instead. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "USB: don't explicitly reenable root-hub status interrupts"Linus Torvalds2008-07-061-0/+11
| | | | | | | | | | | | | | | | | | | | | | | This reverts commit e872154921a6b5256a3c412dd69158ac0b135176. Andrey Borzenkov reports that it resulted in a totally hung machine for him when loading the OHCI driver. Extensive netconsole capture with SysRq output shows that modprobe gets stuck in ohci_hub_status_data() when probing and enabling the OHCI controller, see for example http://lkml.org/lkml/2008/7/5/236 for an analysis. The problem appears to be an interrupt flood triggered by the commit that gets reverted, and Andrey confirmed that the revert makes things work for him again. Reported-and-tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: don't explicitly reenable root-hub status interruptsAlan Stern2008-04-241-11/+0
| | | | | | | | | | | | | | | | | This patch (as1069b) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: clarify usage of hcd->suspend/resume methodsAlan Stern2008-04-241-32/+0
| | | | | | | | | | | | | | | The .suspend and .resume method pointers in struct usb_hcd have not been fully understood by host-controller driver writers. They are meant for use with PCI controllers; other platform-specific drivers generally should not refer to them. To try and clarify matters, this patch (as1065) renames those methods to .pci_suspend and .pci_resume. It eliminates corresponding dead code and bogus references in the ohci-ssb and u132-hcd drivers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: u132-hcd driver: semaphore to mutexDaniel Walker2008-04-241-110/+110
| | | | | | Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: u132-hcd driver style clean upDaniel Walker2008-04-241-2569/+2563
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I was converting a semaphore in this file to a mutex when I noticed that this file has some fairly rampant style problems. Practically every line has spaces instead of tabs .. Once I cleared that up, checkpatch.pl showed a number of other problem.. I think this file might be a good one to review for new style checks that could be added.. Below are the only two remaining which I didn't remove. #5083: FILE: drivers/usb/host/u132-hcd.c:2907: + error: WARNING: labels should not be indented #5087: FILE: drivers/usb/host/u132-hcd.c:2911: + stall: These labels are actually inside a switch statement, and they are right under "default:". "default:" appears to be exempt and these other label should be too, or default shouldn't be exempt. I also deleted a few lines due to single statements inside { } , if (is_error()) { return; } becomes, if (is_error()) return; with one line deleted. Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove dev->power.power_stateAlan Stern2008-04-241-6/+1
| | | | | | | | | | | | | | | | power.power_state is scheduled for removal. This patch (as1053) removes all uses of that field from drivers/usb. Almost all of them were write-only, the most significant exceptions being sl811-hcd.c and u132-hcd.c. Part of this patch was written by Pavel Machek. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb host: fix platform driver hotplug/coldplugKay Sievers2008-04-111-0/+1
| | | | | | | | | | | | | Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable USB HCDs, to allow re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix u132-hcd.c compile errorMirco Tischler2008-02-231-2/+2
| | | | | | | | | | | | | | | This fixes the following compile error caused by commit 3a2d5b700132f35401f1d9e22fe3c2cab02c2549 ("PM: Introduce PM_EVENT_HIBERNATE callback state") CC [M] drivers/usb/host/u132-hcd.o drivers/usb/host/u132-hcd.c: In function ‘u132_suspend’: drivers/usb/host/u132-hcd.c:3224: error: expected expression before ‘int’ drivers/usb/host/u132-hcd.c:3225: error: ‘ports’ undeclared (first use in this function) ... Signed-off-by: Mirco Tischler <mt-ml@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM: Introduce PM_EVENT_HIBERNATE callback stateRafael J. Wysocki2008-02-231-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: ELAN U132 Host Controller Driver: convert sw_lock to mutexMatthias Kaehlcke2007-10-121-17/+17
| | | | | | | | | The ELAN U132 Host Controller Driver uses the semaphore sw_lock as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Eliminate urb->status usage!Alan Stern2007-10-121-19/+17
| | | | | | | | | | | | | | | This patch (as979) removes the last vestiges of urb->status from the host controller drivers and the root-hub emulator. Now the field doesn't get set until just before the URB's completion routine is called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add urb->unlinked fieldAlan Stern2007-10-121-62/+62
| | | | | | | | | | | | | | | | This patch (as970) adds a new urb->unlinked field, which is used to store the status of unlinked URBs since we can't use urb->status for that purpose any more. To help simplify the HCDs, usbcore will check urb->unlinked before calling the completion handler; if the value is set it will automatically override the status reported by the HCD. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: centralize -EREMOTEIO handlingAlan Stern2007-10-121-5/+0
| | | | | | | | | | | | | | | | | | | This patch (as969) continues the ongoing changes to the way HCDs report URB statuses. The programming interface has been simplified by making usbcore responsible for clearing urb->hcpriv and for setting -EREMOTEIO status when an URB with the URB_SHORT_NOT_OK flag ends up as a short transfer. By moving the work out of the HCDs, this removes a fair amount of repeated code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: make HCDs responsible for managing endpoint queuesAlan Stern2007-10-121-51/+119
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Clean up duplicate includes in drivers/usb/Jesper Juhl2007-10-121-1/+0
| | | | | | | | | This patch cleans up duplicate includes in drivers/usb/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: u132-hcd.c - Fix a warning when CONFIG_PM=nGabriel C2007-08-221-0/+3
| | | | | | | | | | | | | | I noticed this warning with CONFING_PM=n ... drivers/usb/host/u132-hcd.c:1525: warning: 'port_power' defined but not used ... Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: use mutex instead of semaphore in the ELAN U132 adapter driverMatthias Kaehlcke2007-07-191-8/+9
| | | | | | | | | The ELAN U132 adapter driver uses the semaphore u132_module_lock as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix more ftdi-elan/u132-hcd #include lossageDavid Brownell2007-05-221-5/+7
| | | | | | | | | | | | Partial fix for bogosity in the ftdi-elan and u132-hcd drivers ... these have no business including with the internals of other drivers, much less doing so in a broken way!! A previous patch resolved one build fix, this resolves another... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* header cleaning: don't include smp_lock.h when not usedRandy Dunlap2007-05-081-1/+0
| | | | | | | | | | | | Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: u132-hcd/ftdi-elan: add support for Option GT 3G Quad cardTony Olech2006-12-201-60/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELAN's U132 is a USB to CardBus OHCI controller adapter, designed specifically for CardBus 3G data cards to function in machines without a CardBus slot. The "ftdi-elan" module is a USB client driver, that detects a supported CardBus OHCI controller plugged into the U132 adapter and thereafter provides the conduit for for access by the "u132-hcd" module. The "u132-hcd" module is a (cut-down OHCI) host controller that supports a single OHCI function of the CardBus card inserted into the U132 adapter. The problem with the initial implementation is that when the CardBus card inserted into the U132 adapter has multiple functions (and a CardBus card can support up to 4 functions), it was the first function that was arbitrarily choosen. The first batch of 3G cards tested, like the Merlin Qualcomm V620, have two functions each supporting a seperate USB OHCI host controller, of which it was that first function that is wired up to the 3G modem. Then along comes the Vodafone Mobile Connect 3G/GPRS data card, aka "Option GT 3G Quad" as printed on it's rear or "Option N.V. GlobeTrotter Fusion Quad Lite" as read with "lspci -v". And it has the meaningful functionality in the second CardBus function. That presents a problem because it was the "ftdi-elan" module alone that knows how to communicate to the embedded CardBus slot and the "u132-hcd" module alone that knows how to access the pcmcia configuration and CardBus accessible memory space. And of course, the information about attached (internally hardwired) devices is contained within USB configuration embedded somewhere within the CardBus card. If only the "u132-hcd" module probe() interface could return a result code that propagated back to the instigating function platform_device_register() then the "ftdi-elan" module could try an alternative CardBus function. However in spite of the recent changes to the drivers/base/ routines that moved device_attach() from bus_add_device() to bus_attach_device() both of those routines lose the "failed to attach" 0 result code and thus the calling routine, namely device_add() is incapable of propaging the "failed to attach" condition back to platform_device_add() and consequently back to the caller of platform_device_register() Experiments show that patching bus_attach_device() to return ENODEV fails with the kernel locking up very early during boot. But, however, if the patch is restricted to calls from platform_device_add() then it does seem to work. Unfortunately, until the kernel's drivers/base is properly modified to propagate -ENODEV back to the caller of platform_device_register(), it is necessary to "fix" the "ftdi-elan" module by importing knowledge from the "u132-hcd" module. This is the reason for the duplicated functionality introduced in this patch. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'master' of ↵David Howells2006-12-051-9/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
| * Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds2006-12-011-6/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (103 commits) usbcore: remove unused argument in autosuspend USB: keep count of unsuspended children USB hub: simplify remote-wakeup handling USB: struct usb_device: change flag to bitflag OHCI: make autostop conditional on CONFIG_PM USB: Add autosuspend support to the hub driver EHCI: Fix root-hub and port suspend/resume problems USB: create a new thread for every USB device found during the probe sequence USB: add driver for the USB debug devices USB: added dynamic major number for USB endpoints USB: pegasus error path not resetting task's state USB: endianness fix for asix.c USB: build the appledisplay driver USB serial: replace kmalloc+memset with kzalloc USB: hid-core: canonical defines for Apple USB device IDs USB: idmouse cleanup USB: make drivers/usb/core/driver.c:usb_device_match() static USB: lh7a40x_udc remove double declaration USB: pxa2xx_udc recognizes ixp425 rev b0 chip usbtouchscreen: add support for DMC TSC-10/25 devices ...
| | * USB: ftdi-elan.c: fixes and cleanupsAdrian Bunk2006-12-011-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains the following possible cleanups: - make the needlessly global ftdi_release_platform_dev() static - remove the unused usb_ftdi_elan_read_reg() - proper prototypes for the following functions: - usb_ftdi_elan_read_pcimem() - usb_ftdi_elan_write_pcimem() Note that the misplaced prototypes for the latter ones in drivers/usb/host/u132-hcd.c were buggy. Depending on the calling convention of the architecture calling one of them could have turned your stack into garbage. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * USB: make drivers/usb/host/u132-hcd.c:u132_hcd_wait staticAdrian Bunk2006-12-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch makes the needlessly global "u132_hcd_wait" static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | Fix misc .c/.h comment typosMatt LaPlante2006-11-301-3/+3
| |/ | | | | | | | | | | | | Fix various .c/.h typos in comments (no code changes). Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | WorkStruct: make allyesconfigDavid Howells2006-11-221-38/+24
|/ | | | | | Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* Remove all inclusions of <linux/config.h>Dave Jones2006-10-041-1/+0
| | | | | | kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
* USB: u132-hcd: host controller driver for ELAN U132 adapterTony Olech2006-09-271-0/+3295
This "u132-hcd" module is one half of the "driver" for ELAN's U132 which is a USB to CardBus OHCI controller adapter. This module needs the "ftdi-elan" module in order to communicate to CardBus OHCI controller inserted into the U132 adapter. When the "ftdi-elan" module detects a supported CardBus OHCI controller in the U132 adapter it loads this "u132-hcd" module. Upon a successful device probe() the single workqueue is started up which does all the processing of commands from the USB core that implement the host controller. The workqueue maintains the urb queues and issues commands via the functions exported by the "ftdi-elan" module. Each such command will result in a callback. Note that the "ftdi-elan" module is a USB client driver. Note that this "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud