summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ehci-hcd.c
Commit message (Collapse)AuthorAgeFilesLines
* usb: host: remove ehci-pxa168.cNeil Zhang2012-02-241-5/+0
| | | | | | | | | | Since ehci-mv.c can cover Marvell PXA and MMP series including PXA168, so this driver seems redundant now. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Cc: <tanmay.upadhyay@einfochips.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Add EHCI bus glue for Loongson1x SoCs (UPDATED)Kelvin Cheung2012-01-241-0/+5
| | | | | | | | | | | Use ehci_setup() in ehci_ls1x_reset(). The Loongson1x SoCs have a built-in EHCI controller. This patch adds the necessary glue code to make the generic EHCI driver usable for them. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* module_param: make bool parameters really bool (drivers & misc)Rusty Russell2012-01-131-1/+1
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* Merge branch 'for-gadget/next' of ↵Greg Kroah-Hartman2011-12-221-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (24 commits) usb: dwc3: gadget: add support for SG lists usb: dwc3: gadget: don't force 'LST' always usb: dwc3: gadget: don't return anything on prepare trbs usb: dwc3: gadget: re-factor dwc3_prepare_trbs() usb: gadget: introduce support for sg lists usb: renesas: pipe: convert a long if into a XOR operation usb: gadget: remove useless depends on Kconfig usb: gadget: s3c-hsudc: remove the_controller global usb: gadget: s3c-hsudc: use release_mem_region instead of release_resource usb: gadget: s3c-hsudc: Add regulator handling usb: gadget: s3c-hsudc: use udc_start and udc_stop functions usb: gadget: s3c-hsudc: move device registration to probe usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probe usb: gadget: s3c-hsudc: add __devinit to probe function usb: gadget: s3c-hsudc: move platform_data struct to global header USB: EHCI: Add Marvell Host Controller driver USB: OTG: add Marvell usb OTG driver support usb: gadget: mv_udc: drop ARCH dependency usb: gadget: mv_udc: fix bug in ep_dequeue usb: gadget: enlarge maxburst bit width. ...
| * USB: EHCI: Add Marvell Host Controller driverNeil Zhang2011-12-201-0/+5
| | | | | | | | | | | | | | | | | | | | | | This patch adds support for EHCI compliant HSUSB Host controller found on Marvell Socs. It fits both OTG and SPH controller on marvell Socs, including PXA9xx/MMP2/MMP3/MGx. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | Merge branch 'for-usb' of ↵Greg Kroah-Hartman2011-12-091-10/+52
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-linux into usb-next * 'for-usb' of git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-linux: usb: PS3 EHCI QH read work-around usb: Fix PS3 EHCI suspend usb: PS3 EHCI HC reset work-around usb: Remove ehci_reset call from ehci_run
| * | usb: PS3 EHCI QH read work-aroundGeoff Levand2011-12-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PS3 EHCI HC errata fix 244. The SCC EHCI HC will not correctly perform QH reads that occur near or span a micro-frame boundry. This is due to a problem in the Nak Count Reload Control logic (EHCI Specification 1.0 Section 4.9.1). The work-around for this problem is for the HC driver to set I=1 (inactive) for QHs with H=1 (list head). Signed-off-by: Geoff Levand <geoff@infradead.org> Acked-by: Alan Stern <stern@rowland.harvard.edu>
| * | usb: Fix PS3 EHCI suspendGeoff Levand2011-12-081-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The EHCI USB controller of the Cell Super Companion Chip used in the PS3 will stop the root hub after all root hub ports are suspended. When in this condition the ehci-hcd handshake routine will return -ETIMEDOUT and the USB runtime suspend sequence will fail. The STS_HLT bit will not be set, so inspection of the frame index is used to test for the condition. Add a new routine handshake_for_broken_root_hub() that is called after an unsuccessful -ETIMEDOUT handshake. On PS3 handshake_for_broken_root_hub() will test for the condition, and if found will return success to allow the USB suspend to complete. For all other platforms handshake_for_broken_root_hub() will return -ETIMEDOUT Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
| * | usb: Remove ehci_reset call from ehci_runGeoff Levand2011-12-081-10/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the ehci_reset() call done in the ehci_run() routine of the USB EHCI host controller driver and add an ehci_reset() call to the probe processing of all EHCI platform drivers that do not already call ehci_reset(). The call to ehci_reset() from ehci_run() was problematic for several platform drivers, and unnecessary for others. This change moves the decision to call ehci_reset() at driver startup to the platform driver code. Signed-off-by: Geoff Levand <geoff@infradead.org> Acked-by: Alan Stern <stern@rowland.harvard.edu>
* | usb: Netlogic: Use CPU_XLR in place of NLM_XLRJayachandran C2011-11-181-1/+1
|/ | | | | | | | Use CONFIG_CPU_XLR instead of CONFIG_NLM_XLR, the NLM_XLR config option is redundant and is being removed. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2011-11-031-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
| * MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss2011-10-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | EHCI: workaround for MosChip controller bugAlan Stern2011-10-181-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1489) works around a hardware bug in MosChip EHCI controllers. Evidently when one of these controllers increments the frame-index register, it changes the three low-order bits (the microframe counter) before changing the higher order bits (the frame counter). If the register is read at just the wrong time, the value obtained is too low by 8. When the appropriate quirk flag is set, we work around this problem by reading the frame-index register a second time if the first value's three low-order bits are all 0. This gives the hardware a chance to finish updating the register, yielding the correct value. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Jason N Pitt <jpitt@fhcrc.org> CC: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | EHCI : introduce a common ehci_setupMatthieu CASTET2011-09-261-0/+29
| | | | | | | | | | | | | | | | | | This allow to clean duplicated code in most of SOC driver. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> # fixes 3.1 build error Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | usb: ehci: fix comment for EHCI_SHRINK_JIFFIESMing Lei2011-09-181-1/+1
| | | | | | | | | | | | | | | | | | EHCI_SHRINK_JIFFIES should be 5ms, which was just used originally, and not 200ms, so fix it. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: EHCI: remove usages of hcd->stateAlan Stern2011-08-221-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1483) improves the ehci-hcd driver family by getting rid of the reliance on the hcd->state variable. It has no clear owner and it isn't protected by the usual HCD locks. In its place, the patch adds a new, private ehci->rh_state field to record the state of the root hub. Along the way, the patch removes a couple of lines containing redundant assignments to the state variable. Also, the QUIESCING state simply gets changed to the RUNNING state, because the driver doesn't make any distinction between them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | usb: OHCI/EHCI support for Netlogic XLS processor.Jayachandran C2011-08-221-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Add supprt for on-chip USB controller for Netlogic XLS MIPS64 SoC processor family. Changes are: - update ehci-hcd.c and ohci-hcd.c to add XLS hcds - add ehci-xls.c: EHCI support for Netlogic XLS. - add ohci-xls.c: OHCI support for Netlogic XLS. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: pxa168: Add onchip USB host controller supportTanmay Upadhyay2011-08-221-0/+5
|/ | | | | | | | | | - Add EHCI Host controller driver - Add wrapper that creates resources for host controller driver v2 - Call clk_put() after clk_disable() in probe function Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'usb-next' of ↵Linus Torvalds2011-07-251-8/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (115 commits) EHCI: fix direction handling for interrupt data toggles USB: serial: add IDs for WinChipHead USB->RS232 adapter USB: OHCI: fix another regression for NVIDIA controllers usb: gadget: m66592-udc: add pullup function usb: gadget: m66592-udc: add function for external controller usb: gadget: r8a66597-udc: add pullup function usb: renesas_usbhs: support multi driver usb: renesas_usbhs: inaccessible pipe is not an error usb: renesas_usbhs: care buff alignment when dma handler USB: PL2303: correctly handle baudrates above 115200 usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift usb: renesas_usbhs: compile/config are rescued usb: renesas_usbhs: fixup comment-out usb: update email address in ohci-sh and r8a66597-hcd usb: r8a66597-hcd: add function for external controller EHCI: only power off port if over-current is active USB: mon: Allow to use usbmon without debugfs USB: EHCI: go back to using the system clock for QH unlinks ehci: add pci quirk for Ordissimo and RM Slate 100 too ehci: refactor pci quirk to use standard dmi_check_system method ... Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
| * USB: EHCI: go back to using the system clock for QH unlinksAlan Stern2011-07-081-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1477) fixes a problem affecting a few types of EHCI controller. Contrary to what one might expect, these controllers automatically stop their internal frame counter when no ports are enabled. Since ehci-hcd currently relies on the frame counter for determining when it should unlink QHs from the async schedule, those controllers run into trouble: The frame counter stops and the QHs never get unlinked. Some systems have also experienced other problems traced back to commit b963801164618e25fbdc0cd452ce49c3628b46c8 (USB: ehci-hcd unlink speedups), which made the original switch from using the system clock to using the frame counter. It never became clear what the reason was for these problems, but evidently it is related to use of the frame counter. To fix all these problems, this patch more or less reverts that commit and goes back to using the system clock. But this can't be done cleanly because other changes have since been made to the scan_async() subroutine. One of these changes involved the tricky logic that tries to avoid rescanning QHs that have already been seen when the scanning loop is restarted, which happens whenever an URB is given back. Switching back to clock-based unlinks would make this logic even more complicated. Therefore the new code doesn't rescan the entire async list whenever a giveback occurs. Instead it rescans only the current QH and continues on from there. This requires the use of a separate pointer to keep track of the next QH to scan, since the current QH may be unlinked while the scanning is in progress. That new pointer must be global, so that it can be adjusted forward whenever the _next_ QH gets unlinked. (uhci-hcd uses this same trick.) Simplification of the scanning loop removes a level of indentation, which accounts for the size of the patch. The amount of code changed is relatively small, and it isn't exactly a reversion of the b963801164 commit. This fixes Bugzilla #32432. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Tested-by: Matej Kenda <matejken@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: EHCI: Allow users to override 80% max periodic bandwidthKirill Smelkov2011-07-081-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are cases, when 80% max isochronous bandwidth is too limiting. For example I have two USB video capture cards which stream uncompressed video, and to stream full NTSC + PAL videos we'd need NTSC 640x480 YUV422 @30fps ~17.6 MB/s PAL 720x576 YUV422 @25fps ~19.7 MB/s isoc bandwidth. Now, due to limited alt settings in capture devices NTSC one ends up streaming with max_pkt_size=2688 and PAL with max_pkt_size=2892, both with interval=1. In terms of microframe time allocation this gives NTSC ~53us PAL ~57us and together ~110us > 100us == 80% of 125us uframe time. So those two devices can't work together simultaneously because the'd over allocate isochronous bandwidth. 80% seemed a bit arbitrary to me, and I've tried to raise it to 90% and both devices started to work together, so I though sometimes it would be a good idea for users to override hardcoded default of max 80% isoc bandwidth. After all, isn't it a user who should decide how to load the bus? If I can live with 10% or even 5% bulk bandwidth that should be ok. I'm a USB newcomer, but that 80% set in stone by USB 2.0 specification seems to be chosen pretty arbitrary to me, just to serve as a reasonable default. NOTE 1 ~~~~~~ for two streams with max_pkt_size=3072 (worst case) both time allocation would be 60us+60us=120us which is 96% periodic bandwidth leaving 4% for bulk and control. Alan Stern suggested that bulk then would be problematic (less than 300*8 bittimes left per microframe), but I think that is still enough for control traffic. NOTE 2 ~~~~~~ Sarah Sharp expressed concern that maxing out periodic bandwidth could lead to vendor-specific hardware bugs on host controllers, because > It's entirely possible that you'll run into > vendor-specific bugs if you try to pack the schedule with isochronous > transfers. I don't think any hardware designer would seriously test or > validate their hardware with a schedule that is basically a violation of > the USB bus spec (more than 80% for periodic transfers). So far I've only tested this patch on my HP Mini 5103 with N10 chipset kirr@mini:~$ lspci 00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8059 PCI-E Gigabit Ethernet Controller (rev 11) and the system works stable with 110us/uframe (~88%) isoc bandwith allocated for above-mentioned isochronous transfers. NOTE 3 ~~~~~~ This feature is off by default. I mean max periodic bandwidth is set to 100us/uframe by default exactly as it was before the patch. So only those of us who need the extreme settings are taking the risk - normal users who do not alter uframe_periodic_max sysfs attribute should not see any change at all. NOTE 4 ~~~~~~ I've tried to update documentation in Documentation/ABI/ thoroughly, but only "TBD" was put into Documentation/usb/ehci.txt -- the text there seems to be outdated and much needing refreshing, before it could be amended. Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: EHCI: Move sysfs related bits into ehci-sysfs.cKirill Smelkov2011-07-081-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only sysfs attr implemented so far is "companion" from ehci-hub.c, but in the next patch we are going to add another sysfs file, so prior to that let's structure things and move already-in-there sysfs code to separate file. NOTE: All the code I'm moving into this new file was written by Alan Stern (in 57e06c11 "EHCI: force high-speed devices to run at full speed"; Jan 16 2007), that's why I'm putting Copyright (C) 2007 by Alan Stern there after explicit request from the author. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * ehci-hcd: remove EOL from MODULE_PARM_DESC for 'hird' optionNiels de Vos2011-06-071-1/+1
| | | | | | | | | | | | | | There is no need to have a "\n" on a MODULE_PARM_DESC, remove it Signed-off-by: Niels de Vos <ndevos@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: change maintainership of ohci-hcd and ehci-hcdAlan Stern2011-06-151-0/+4
|/ | | | | | | | Following the loss of David Brownell, I volunteer to maintain the ohci-hcd and ehci-hcd drivers. This patch (as1472) makes it official. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove remaining usages of hcd->state from usbcore and fix regressionAlan Stern2011-05-191-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1467) removes the last usages of hcd->state from usbcore. We no longer check to see if an interrupt handler finds that a controller has died; instead we rely on host controller drivers to make an explicit call to usb_hc_died(). This fixes a regression introduced by commit 9b37596a2e860404503a3f2a6513db60c296bfdc (USB: move usbcore away from hcd->state). It used to be that when a controller shared an IRQ with another device and an interrupt arrived while hcd->state was set to HC_STATE_HALT, the interrupt handler would be skipped. The commit removed that test; as a result the current code doesn't skip calling the handler and ends up believing the controller has died, even though it's only temporarily stopped. The solution is to ignore HC_STATE_HALT following the handler's return. As a consequence of this change, several of the host controller drivers need to be modified. They can no longer implicitly rely on usbcore realizing that a controller has died because of hcd->state. The patch adds calls to usb_hc_died() in the appropriate places. The patch also changes a few of the interrupt handlers. They don't expect to be called when hcd->state is equal to HC_STATE_HALT, even if the controller is still alive. Early returns were added to avoid any confusion. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Manuel Lauss <manuel.lauss@googlemail.com> CC: Rodolfo Giometti <giometti@linux.it> CC: Olav Kongas <ok@artecdesign.ee> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: Add bus glue for GRLIB GRUSBHC controllerJan Andersson2011-05-031-0/+5
| | | | | | | | | | | | | This patch adds support for the GRLIB GRUSBHC EHCI controller from Aeroflex Gaisler. The controller is typically found on LEON/GRLIB SoCs. Tested on GR-LEON4-ITX with with little endian interface and on LEON3 system on GR-PCI-XC5V development board for big endian controller. Signed-off-by: Jan Andersson <jan@gaisler.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: Support controllers with big endian capability regsJan Andersson2011-05-031-1/+1
| | | | | | | | | | | | | | | | The two first HC capability registers (CAPLENGTH and HCIVERSION) are defined as one 8-bit and one 16-bit register. Most HC implementations have selected to treat these registers as part of a 32-bit register, giving the same layout for both big and small endian systems. This patch adds a new quirk, big_endian_capbase, to support controllers with big endian register interfaces that treat HCIVERSION and CAPLENGTH as individual registers. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ehci: add bus glue for the Atheros AR71XX/AR724X/AR91XX SoCsGabor Juhos2011-04-131-0/+5
| | | | | | | | | | | The Atheros AR71XX/AR91XX SoCs have a built-in EHCI controller. This patch adds the necessary glue code to make the generic EHCI driver usable for them. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add initial S5P EHCI driverJoonyoung Shim2011-04-131-0/+5
| | | | | | | | | | This patch adds host USB high speed driver for samsung S5P series. This is initial driver and we need additional implementation to support some functions like power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2011-03-161-6/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits) tty: serial: altera_jtaguart: Add device tree support tty: serial: altera_uart: Add devicetree support dt: eliminate of_platform_driver shim code dt: Eliminate of_platform_{,un}register_driver dt/serial: Eliminate users of of_platform_{,un}register_driver dt/usb: Eliminate users of of_platform_{,un}register_driver dt/video: Eliminate users of of_platform_{,un}register_driver dt/net: Eliminate users of of_platform_{,un}register_driver dt/sound: Eliminate users of of_platform_{,un}register_driver dt/spi: Eliminate users of of_platform_{,un}register_driver dt: uartlite: merge platform and of_platform driver bindings dt: xilinx_hwicap: merge platform and of_platform driver bindings ipmi: convert OF driver to platform driver leds/leds-gpio: merge platform_driver with of_platform_driver dt/sparc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: move of_bus_type infrastructure to ibmebus drivercore/dt: add a match table pointer to struct device dt: Typo fix. altera_ps2: Add devicetree support ...
| * dt/usb: Eliminate users of of_platform_{,un}register_driverGrant Likely2011-02-281-6/+6
| | | | | | | | | | | | | | | | Get rid of users of of_platform_driver in drivers/usb. The of_platform_{,un}register_driver functions are going away, so the users need to be converted to using the platform_bus_type directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | usb: host: Add EHCI driver for NVIDIA Tegra SoCsBenoit Goby2011-03-111-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Tegra 2 SoC has 3 EHCI compatible USB controllers. This patch adds the necessary glue to allow the ehci-hcd driver to work on Tegra 2 SoCs. The platform data is used to configure board-specific phy settings and to configure the operating mode, as one of the ports may be used as a otg port. For additional power saving, the driver supports powering down the phy on bus suspend when it is used, for example, to connect an internal device that use an out-of-band remote wakeup mechanism (e.g. a gpio). Signed-off-by: Benoit Goby <benoit@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | usb: EHCI, OHCI: Add configuration for the SH USB controllerYoshihiro Shimoda2011-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | The SH EHCI/OHCI driver hardcoded the CPU type in {ehci,ohci}-hcd.c. So if we will add the new CPU, we had to add to the hcd driver each time. The patch adds the CONFIG_USB_{EHCI,OHCI}_SH configuration. So if we want to use the SH EHCI/OHCI, we only enable the configuration. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB host: Move AMD PLL quirk to pci-quirks.cAndiry Xu2011-03-011-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the AMD PLL quirk code in OHCI/EHCI driver to pci-quirks.c, and exports the functions to be used by xHCI driver later. AMD PLL quirk disable the optional PM feature inside specific SB700/SB800/Hudson-2/3 platforms under the following conditions: 1. If an isochronous device is connected to OHCI/EHCI/xHCI port and is active; 2. Optional PM feature that powers down the internal Bus PLL when the link is in low power state is enabled. Without AMD PLL quirk, USB isochronous stream may stutter or have breaks occasionally, which greatly impair the performance of audio/video streams. Currently AMD PLL quirk is implemented in OHCI and EHCI driver, and will be added to xHCI driver too. They are doing similar things actually, so move the quirk code to pci-quirks.c, which has several advantages: 1. Remove duplicate defines and functions in OHCI/EHCI (and xHCI) driver and make them cleaner; 2. AMD chipset information will be probed only once and then stored. Currently they're probed during every OHCI/EHCI initialization, move the detect code to pci-quirks.c saves the repeat detect cost; 3. Build up synchronization among OHCI/EHCI/xHCI driver. In current code, every host controller enable/disable PLL only according to its own status, and may enable PLL while there is still isoc transfer on other HCs. Move the quirk to pci-quirks.c prevents this issue. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alex He <alex.he@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: EHCI bus glue for on-chip PMC MSP USB controllerAnoop2011-02-251-0/+5
| | | | | | | | | | | | | | This patch add bus glue for USB controller commonly found in PMC-Sierra MSP71xx family of SoC's. Signed-off-by: Anoop P A <anoop.pa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: don't run ehci_reset in ehci_run for tdi deviceMatthieu CASTET2011-02-171-1/+6
|/ | | | | | | | | | | TDI driver does the ehci_reset in their reset callback. Don't reset in ehci_run because configuration settings done in platform driver will be reset. This will allow to make msm use ehci_run. Signed-off-by: Matthieu CASTET <castet.matthieu@parrot.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: fix DMA deallocation bugAlan Stern2011-01-221-7/+12
| | | | | | | | | | | | | | | This patch (as1440) fixes a bug in ehci-hcd. ehci->periodic_size is used to compute the size in a dma_alloc_coherent() call, but then it gets changed later on. As a result, the corresponding call to dma_free_coherent() passes a different size from the original allocation. Fix the problem by adjusting ehci->periodic_size before carrying out any of the memory allocations. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> CC: David Brownell <david-b@pacbell.net> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'usb-next' of ↵Linus Torvalds2011-01-071-1/+29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
| * Merge branch 'usb-next' into musb-mergeGreg Kroah-Hartman2010-12-161-1/+29
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * usb-next: (132 commits) USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added usb: gadget: f_ncm.c added usb: gadget: u_ether: prepare for NCM usb: pch_udc: Fix setup transfers with data out usb: pch_udc: Fix compile error, warnings and checkpatch warnings usb: add ab8500 usb transceiver driver USB: gadget: Implement runtime PM for MSM bus glue driver USB: gadget: Implement runtime PM for ci13xxx gadget USB: gadget: Add USB controller driver for MSM SoC USB: gadget: Introduce ci13xxx_udc_driver struct USB: gadget: Initialize ci13xxx gadget device's coherent DMA mask USB: gadget: Fix "scheduling while atomic" bugs in ci13xxx_udc USB: gadget: Separate out PCI bus code from ci13xxx_udc ...
| | * USB: EHCI: Add MSM Host Controller driverPavankumar Kondeti2010-12-101-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for EHCI compliant HSUSB Host controller found on MSM chips. The root hub has a single port and TT is built into it. This driver depends on OTG driver for PHY initialization, clock management and powering up VBUS. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * USB: EHCI: ASPM quirk of ISOC on AMD SB800Alex He2010-12-101-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ASPM PM Feature is enabled on UMI link, devices that use ISOC stream of data transfer may be exposed to longer latency causing less than optimal per- formance of the device. The longer latencies are normal and are due to link wake time coming out of low power state which happens frequently to save power when the link is not active. The following code will make exception for certain features of ASPM to be by passed and keep the logic normal state only when the ISOC device is connected and active. This change will allow the device to run at optimal performance yet minimize the impact on overall power savings. Signed-off-by: Alex He <alex.he@amd.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * Merge branch 'sh/ehci' of ↵Greg Kroah-Hartman2010-12-031-0/+5
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6 into work * 'sh/ehci' of master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Convert to USB_ARCH_HAS_OHCI/EHCI selects. usb: ehci-sh: Add missing ehci helpers. usb: ehci-sh: Fix up fault in shutdown path. sh: Add EHCI support for SH7786. usb: ehci-hcd: Add support for SuperH EHCI. usb: ohci-sh: Set IRQ as shared.
| | | * usb: ehci-hcd: Add support for SuperH EHCI.Paul Mundt2010-11-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a trivial stub for supporting EHCI mode of the on-chip SH USB host controllers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| | * | usb: ehci: introduce CONFIG_USB_EHCI_HCD_OMAPKeshava Munegowda2010-12-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce the CONFIG_USB_EHCI_HCD_OMAP option to select EHCI support on OMAP3 and later chips. This scales better than having a long line of dependencies for each new OMAP with EHCI support. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
| | * | USB host: Adding USB ehci & ohci support for spear platformDeepak Sikri2010-11-161-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ehci and ohci controller in the SPEAr platform. Changes since V2: added clear_tt_buffer_complete in ehci_spear_hc_driver Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | usb: Add support for VIA VT8500 and compatibles in EHCI HCDAlexey Charkov2010-11-111-0/+5
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | VIA and WonderMedia Systems-on-Chip feature a standard EHCI host controller. This adds necessary glue to use the standard driver with these systems. Signed-off-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | Merge branch 'master' of git://git.infradead.org/users/cbou/linux-cns3xxx ↵Russell King2011-01-031-0/+5
|\ \ \ | |/ / |/| | | | | into devel-stable
| * | USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCsMac Lin2010-11-291-0/+5
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CNS3XXX SOC has include USB EHCI and OHCI compatible controllers. This patch adds the necessary glue logic to allow ehci-hcd and ohci-hcd drivers to work on CNS3XXX The EHCI and OHCI controllers share a common clock control and reset bit, therefore additional check for the timming of enabling and disabling is required. The USB bit of PLL Power Down Control is also shared by OTG, 24MHzUART clock, Crypto clock, PCIe reference clock, and Clock Scale Generator. Therefore we only ensure it is enabled, while not disabling it. Signed-off-by: Mac Lin <mkl0301@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* | USB: EHCI: fix obscure race in ehci_endpoint_disableAlan Stern2010-11-161-5/+5
|/ | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1435) fixes an obscure and unlikely race in ehci-hcd. When an async URB is unlinked, the corresponding QH is removed from the async list. If the QH's endpoint is then disabled while the URB is being given back, ehci_endpoint_disable() won't find the QH on the async list, causing it to believe that the QH has been lost. This will lead to a memory leak at best and quite possibly to an oops. The solution is to trust usbcore not to lose track of endpoints. If the QH isn't on the async list then it doesn't need to be taken off the list, but the driver should still wait for the QH to become IDLE before disabling it. In theory this fixes Bugzilla #20182. In fact the race is so rare that it's not possible to tell whether the bug is still present. However, adding delays and making other changes to force the race seems to show that the patch works. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: David Brownell <david-b@pacbell.net> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add EHCI and OHCH glue for OCTEON II SOCs.David Daney2010-10-291-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | The OCTEON II SOC has USB EHCI and OHCI controllers connected directly to the internal I/O bus. This patch adds the necessary 'glue' logic to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II. The OCTEON normally runs big-endian, and the ehci/ohci internal registers have host endianness, so we need to select USB_EHCI_BIG_ENDIAN_MMIO. The ehci and ohci blocks share a common clocking and PHY infrastructure. Initialization of the host controller and PHY clocks is common between the two and is factored out into the octeon2-common.c file. Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in arch/mips/Kconfig in a following patch. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-usb@vger.kernel.org To: dbrownell@users.sourceforge.net Patchwork: http://patchwork.linux-mips.org/patch/1675/ Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OpenPOWER on IntegriCloud