summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* USB: EHCI: make ehci-tegra a separate driverManjunath Goudar2013-06-171-0/+1
| | | | | | | | | | | | | | | | | | | Separate the Tegra on-chip host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> [swarren, reworked Manjunath's patches to split them more logically, minor re-order of added lines to better match layout of other split-up HCD drivers and existing code, add MODULE_DEVICE_TABLE, fix MODULE_LICENSE, adapted to change in earlier patches which removed the ehci_driver_overrides addition, removed all PM code and solved circular dependencies.] Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: OHCI: make ohci-platform a separate driverManjunath Goudar2013-06-031-0/+1
| | | | | | | | | | | | | | | | | This patch splits the ohci-platform code from ohci-hcd out into its own separate driver module.This work is part of enabling multi-platform kernels on ARM. In V2: -Passed "hcd" argument instead of "ohci" in ohci_setup() because it is using "struct usb_hcd" argument. In V3: -Directly passed "hcd" argument not required to call ohci_to_hcd() function. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: OHCI: make ohci-pci a separate driverManjunath Goudar2013-05-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch splits the PCI portion of ohci-hcd out into its own separate driver module, called ohci-pci. The major point of difficulty lies in ohci-pci's many vendor- and device-specific workarounds. Some of them have to be applied before calling ohci_start() some after, which necessitates a fair amount of code motion. The other platform drivers require much smaller changes. The complete sb800_prefetch() function moved to ohci-q.c,because its only related to ohci-pci driver. USB_OHCI_HCD_PCI symbol no longer dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF that's what removed. V2: - few specific content of pci related code in ohci_pci_start function has been moved to ohci_pci_reset and rest of the generic code is written in ohci_start of ohci-hcd.c file. V3: - ohci_restart() has been called in ohci_pci_reset() function for to reset the ohci pci. V4: -sb800_prefetch() moved to ohci-q.c,because its only related to ohci-pci. -no longer _creating_ CONFIG_USB_OHCI_PCI,creating CONFIG_USB_OHCI_HCD_PCI. -overrides renamed with pci_override,its giving proper meaning. V5: -sb800_prefetch() moved to pci-quirks.c,because its only related to pci. V6: -sb800_prefetch() function has been moved to pci-quirks.c made as separate patch in 2/3. -Most of the generic ohci pci changes moved in 2/3 patch,now this is complete ohci-pci separation patch. V7: -Unrelated include file has been removed from ohci.h file. V8: -USB_OHCI_HCD_PCI symbol does not dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb host: Faraday USB2.0 FUSBH200-HCD driverYuan-Hsin Chen2013-05-171-0/+1
| | | | | | | | | | | FUSBH200-HCD is an USB2.0 hcd for Faraday FUSBH200. FUSBH200 is an ehci-like controller with some differences. First, register layout of FUSBH200 is incompatible with EHCI. Furthermore, FUSBH200 is lack of siTDs which means iTDs are used for both HS and FS ISO transfer. Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: make ehci-msm a separate driverManjunath Goudar2013-04-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the Qualcomm QSD/MSM on-chip host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before Qualcomm QSD/MSM can be booted with a multi-platform kernel, which is not expected before 3.11. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the msm bus glue. In V5 (arnd): - add FIXME about missing usb_add_hcd() or usb_remove_hcd() calls In V3: - Detailed commit message added here describing why this patch is required. - Arranged #include's in alphabetical order. - driver.name initialized hcd_name[] = "ehci-msm" in platform_driver structure initialization instead of "msm-ehci", which was the reason why it broke in EHCI USB testing In V2: Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: make ehci-atmel a separate driverManjunath Goudar2013-04-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the Atmel host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before Atmel can be booted with a multi-platform kernel. This is currently planned for Linux-3.11. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the Atmel bus glue. In V4 (arnd): - reordered #include statements. - removed call to ehci_shutdown and the corresponding export In V3: - Detailed commit message added here about why this patch is required. - Replaced hcd_name string "ehci-atmel" to "atmel-ehci". - Inserted blank line in the Makefile to separate the EHCI drivers from the following non-EHCI drivers. - Exported ehci_shutdown symbol as it is needed by the Atmel driver. - Eliminated ehci_atmel_setup routine because hcd registers can be directly set in the ehci_atmel_drv_probe function. In V2: Resolved below compiler error. drivers/usb/host/ehci-atmel.c: In function 'ehci_atmel_drv_remove': drivers/usb/host/ehci-atmel.c:167: error: implicit declaration of function 'ehci_shutdown' Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: make ehci-s5p a separate driverManjunath Goudar2013-04-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the Samsung S5P/EXYNOS host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before S5P/EXYNOS can be booted with a multi-platform kernel. We currently expect those to get merged for 3.10. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the s5p bus glue. In V4 (arnd) - revert some of the pointless changes. - fix allocation of s5p specific data structure. In V3: - Detailed commit message added here, why this patch is required. - MODULE_LICENSE is GPL v2. - Added .extra_priv_size to eliminate the separate allocation of the s5p_ehci_hcd structure and removed .reset function pointer initialization. - Arranged #include's in alphabetical order. - After using extra_priv_size initialization, struct usb_hcd *hcd is redundant and can be removed from the probe function. - Eliminated s5p_ehci_phy_enable,contents of statements moved into the s5p_ehci_probe - Eliminated s5p_ehci_phy_disable, contents of statements moved into the s5p_ehci_remove. In V2: - Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: make ehci-spear a separate driverManjunath Goudar2013-04-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the SPEAr host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before SPEAr can be booted with a multi-platform kernel, but they are queued in the arm-soc tree for 3.10. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the SPEAr bus glue. In V4 (arnd): - renamed all 'struct spear_ehci' pointers from 'ehci' to the less ambiguous 'sehci'. - folded trivial spear_start_ehci/spear_stop_ehci functions into callers. - brought back initialization of ehci->caps. In V3: - Detailed commit message added here about why this patch is required. - Eliminated ehci_spear_setup routine because hcd registers can be directly set in the spear_ehci_hcd_drv_probe function. - spear_overrides struct initialized. - Converted to using .extra_priv_size for allocating spear_ehci, and updated all users of that structure. - to_spear_ehci() macro modified for spear_ehci. In V2: - Replaced spear as SPEAr everywhere, leaving functions/variables/config options. Signed-off-by: Deepak Saxena <dsaxena@linaro.org> Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.linux@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: spear-devel@list.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: make ehci-orion a separate driverManjunath Goudar2013-04-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the Orion host controller driver from ehci-hcd host code into its own driver module because of following reason. With the multiplatform changes in arm-soc tree, it becomes possible to enable the mvebu platform (which uses ehci-orion) at the same time as other platforms that require a conflicting EHCI bus glue. At the moment, this results in a warning like drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable] and an ehci driver that only works on one of them. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the orion bus glue. An earlier version of this patch was included in 3.9 but caused a regression there, which has subsequently been fixed. While we are here, use the opportunity to disabiguate the two Marvell EHCI controller implementations in Kconfig. In V4 (arnd): - Improve Kconfig text In V3: - More detail provided in commit message regarding this patch. - Replaced hcd_name string "ehci-orion" into "orion-ehci". - MODULE_LICENSE is GPL v2. - In ehci_init_driver calling second argument passed as NULL instead of ehci_orion_overrides because ehci_orion_overrides is removed. In V2: - Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: split ehci-omap out to a separate driverAlan Stern2013-03-151-0/+1
| | | | | | | | | | This patch (as1645) converts ehci-omap over to the new "ehci-hcd is a library" approach, so that it can coexist peacefully with other EHCI platform drivers and can make use of the private area allocated at the end of struct ehci_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: fix build error in ehci-mxcAlan Stern2013-01-231-0/+1
| | | | | | | | | | | | | | | | | | | | | This patch (as1643b) fixes a build error in ehci-hcd when compiling for ARM with allmodconfig: drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition drivers/usb/host/ehci-mxc.c:280:31: warning: 'ehci_mxc_driver' defined but not used [-Wunused-variable] drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition The fix is to convert ehci-mxc over to the new "ehci-hcd is a library" scheme so that it can coexist peacefully with the ehci-platform driver. As part of the conversion the ehci_mxc_priv data structure, which was allocated dynamically, is now placed where it belongs: in the private area at the end of struct ehci_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: make ehci-platform a separate driverAlan Stern2012-11-011-0/+1
| | | | | | | | This patch (as1626) splits the ehci-platform code from ehci-hcd out into its own separate driver module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: make ehci-pci a separate driverAlan Stern2012-11-011-0/+2
| | | | | | | | | | | | This patch (as1625) splits the PCI portion of ehci-hcd out into its own separate driver module, called ehci-pci. Consistently with the current practice, the decision whether to build this module is not user-configurable. If EHCI and PCI are enabled then the module will be built, always. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: move common alchemy USB routines to arch/mips/alchemy/common.cFlorian Fainelli2012-10-221-1/+0
| | | | | | | | | | | | A previous patch converted the Alchemy platform to use the OHCI and EHCI platform drivers. As a result, all the common logic to handle USB present in drivers/usb/host/alchemy-common.c has no reason to remain here, so we move it to arch/mips/alchemy/common/usb.c which is a more appropriate place. This change was suggested by Manuel Lauss. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Add driver for the ssb busHauke Mehrtens2012-04-181-0/+1
| | | | | | | | | | | | | | | | | This adds a USB driver using the generic platform device driver for the USB controller found on the Broadcom ssb bus. The ssb bus just exposes one device which serves the OHCI and the EHCI controller at the same time. This driver probes for this USB controller and creates and registers two new platform devices which will be probed by the new generic platform device driver. This makes it possible to use the EHCI and the OCHI controller on the ssb bus at the same time. The old ssb OHCI USB driver will be removed in the next step as this driver also provide an OHCI driver and an EHCI for the cores supporting it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Add driver for the bcma busHauke Mehrtens2012-04-181-0/+1
| | | | | | | | | | | | | This adds a USB driver using the generic platform device driver for the USB controller found on the Broadcom bcma bus. The bcma bus just exposes one device which serves the OHCI and the EHCI controller at the same time. This driver probes for this USB controller and creates and registers two new platform devices which will be probed by the new generic platform device driver. This makes it possible to use the EHCI and the OCHI controller on the bcma bus at the same time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci: add platform driver supportSebastian Andrzej Siewior2012-03-131-0/+4
| | | | | | | | | This adds a fairly simple xhci-platform driver support. Currently it is used by the dwc3 driver for supporting host mode. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2011-11-031-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
| * MIPS: Alchemy: abstract USB block control register accessManuel Lauss2011-10-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alchemy chips have one or more registers which control access to the usb blocks as well as PHY configuration. I don't want the OHCI/EHCI glues to know about the different registers and bits; new code hides the gory details of USB configuration from them. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Patchwork: https://patchwork.linux-mips.org/patch/2709/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 drivers/usb/host/alchemy-common.c
* | usb/xhci: remove CONFIG_PCI in xhci.c's probe functionSebastian Andrzej Siewior2011-09-261-1/+2
|/ | | | | | | | | | | | | | This removes the need of ifdefs within the init function and with it the headache about the correct clean without bus X but with bus/platform Y & Z. xhci-pci is only compiled if CONFIG_PCI is selected which can be de-selected now without trouble. For now the result is kinda useless because we have no other glue code. However, since nobody is using USB_ARCH_HAS_XHCI then it should not be an issue :) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add EHCI and OHCH glue for OCTEON II SOCs.David Daney2010-10-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The OCTEON II SOC has USB EHCI and OHCI controllers connected directly to the internal I/O bus. This patch adds the necessary 'glue' logic to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II. The OCTEON normally runs big-endian, and the ehci/ohci internal registers have host endianness, so we need to select USB_EHCI_BIG_ENDIAN_MMIO. The ehci and ohci blocks share a common clocking and PHY infrastructure. Initialization of the host controller and PHY clocks is common between the two and is factored out into the octeon2-common.c file. Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in arch/mips/Kconfig in a following patch. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-usb@vger.kernel.org To: dbrownell@users.sourceforge.net Patchwork: http://patchwork.linux-mips.org/patch/1675/ Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* usb: makefile cleanupmatt mooney2010-10-221-9/+10
| | | | | | | | | | | | | | | For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add platform glue driver for FSL USB DR controllerAnatolij Gustschin2010-10-221-0/+1
| | | | | | | | | | | | | | | | | | | Replace FSL USB platform code by simple platform driver for creation of FSL USB platform devices. The driver creates platform devices based on the information from USB nodes in the flat device tree. This is the replacement for old arch fsl_soc usb code removed by this patch. The driver uses usual of-style binding, available EHCI-HCD and UDC drivers can be bound to the created devices. The new of-style driver additionaly instantiates USB OTG platform device, as the appropriate USB OTG driver will be added soon. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: change to new flag variablematt mooney2010-10-221-3/+1
| | | | | | | | | Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: xhci: rename driver to xhci_hcdAlex Chiang2010-03-191-2/+2
| | | | | | | | | Naming consistency with other USB HCDs. Signed-off-by: Alex Chiang <achiang@hp.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: MXC: Add i.MX21 specific USB host controller driver.Martin Fuzzey2010-03-021-0/+2
| | | | | | | | | This driver is a Full / Low speed only USB host for the i.MX21. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: NXP ISP1362 USB host driverLothar Wassmann2009-09-231-0/+1
| | | | | | | | | Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries.Sarah Sharp2009-06-151-0/+2
| | | | | | | | | Add Makefile and Kconfig entries for the xHCI host controller driver. List Sarah Sharp as the maintainer for the xHCI driver. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Driver for Freescale QUICC Engine USB Host ControllerAnton Vorontsov2009-01-271-0/+6
| | | | | | | | | | | | | | | | | | This patch adds support for the FHCI USB controller, as found in the Freescale MPC836x and MPC832x processors. It can support Full or Low speed modes. Quite a lot the hardware is doing by itself (SOF generation, CRC generation and checking), though scheduling and retransmission is on software's shoulders. This controller does not integrate the root hub, so this driver also fakes one-port hub. External hub is required to support more than one device. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb host: Oxford OXU210HP HCD driver.Rodolfo Giometti2009-01-071-0/+1
| | | | | | | | | | This driver implements the support for Oxford OXU210HP USB high-speed host, no peripheral nor OTG. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: Kan Liu <kan.k.liu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* wusb: add HWA host controller driverInaky Perez-Gonzalez2008-09-171-0/+1
| | | | | | | Add a driver for Wireless USB host controllers connected via USB (a Host Wire Adapter or HWA). Signed-off-by: David Vrabel <david.vrabel@csr.com>
* wusb: WHCI host controller driverDavid Vrabel2008-09-171-0/+2
| | | | | | | | | | | | | A driver for Wireless USB host controllers that comply with the Wireless Host Controller Interface (HCI) specification as published by Intel. The latest publically available version of the specification (0.95) is supported (except for isochronous transfers). Build fixes by Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David Vrabel <david.vrabel@csr.com>
* USB: ISP1760 HCD driverSebastian Siewior2008-05-021-1/+3
| | | | | | | | | | This driver has been written from scratch and supports the ISP1760. ISP1761 might (should) work as well but the OTG isn't supported. Also ISO packets are not. However, it works on my little PowerPC board. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: r8a66597-hcd: host controller driver for R8A66597Yoshihiro Shimoda2007-07-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | I would like to submit Renesas R8A66597 USB HCD driver. R8A66597 is Renesas USB 2.0 host and peripheral combined controller device originally designed for embedded products. As a limitation of this device, it does not support externel hub more than 2 tier, and cannot communicate with a USB device more than 10. Then this device is not compatible with EHCI and/or OHCI, I wrote driver support patch based on sl811 code. This driver has the following unique specifications: - Implement transfer timeout to share one pipe with plural endpoint. - Detach detection of a USB device connected to externel hub. The driver has been tested external hub, usb-hdd, usb-cdrom, usb-speaker, mice, keyboard, and usbtest driver. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove ancient/broken CRIS hcdDavid Brownell2007-04-271-1/+0
| | | | | | | | | | | | | | | Remove the old crisv10 HCD ... it can't have built for some time, doesn't even have a Kconfig entry, was the last driver not to have been converted to the "hcd" framework, and considering the usbcore changes since its last patch was merged, has just got to buggy as all get-out. I'm told Axis has a new driver, and will be submitting it soon. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: u132-hcd: host controller driver for ELAN U132 adapterTony Olech2006-09-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This "u132-hcd" module is one half of the "driver" for ELAN's U132 which is a USB to CardBus OHCI controller adapter. This module needs the "ftdi-elan" module in order to communicate to CardBus OHCI controller inserted into the U132 adapter. When the "ftdi-elan" module detects a supported CardBus OHCI controller in the U132 adapter it loads this "u132-hcd" module. Upon a successful device probe() the single workqueue is started up which does all the processing of commands from the USB core that implement the host controller. The workqueue maintains the urb queues and issues commands via the functions exported by the "ftdi-elan" module. Each such command will result in a callback. Note that the "ftdi-elan" module is a USB client driver. Note that this "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: hcd uses EXTRA_CFLAGS for -DDEBUGDavid Brownell2006-01-041-0/+4
| | | | | | | | | This modifies the HCD builds to automatically "-DDEBUG" if CONFIG_USB_DEBUG is selected. It's just a minor source code cleanup, guaranteeing consistency. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: move handoff codeDavid Brownell2005-10-281-2/+3
| | | | | | | | | | | | | | | | | | | | | This moves the PCI quirk handling for USB host controllers from the PCI directory to the USB directory. Follow-on patches will need to: (a) merge these copies with the originals in the HCD reset methods. they don't wholly agree, despite doing the very same thing; and (b) eventually change it so "usb-handoff" is the default, to help get more robust USB/BIOS/input/... interactions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/Makefile | 2 drivers/pci/quirks.c | 253 --------------------------------------- drivers/usb/Makefile | 1 drivers/usb/host/Makefile | 5 drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-)
* [PATCH] USB: Add isp116x-hcd USB host controller driverOlav Kongas2005-06-271-0/+1
| | | | | | | | | | | | | | | | | | | This patch provides an "isp116x-hcd" driver for Philips' ISP1160/ISP1161 USB host controllers. The driver: - is relatively small, meant for use on embedded platforms. - runs usbtests 1-14 without problems for days. - has been in use by 6-7 different people on ARM and PPC platforms, running a range of devices including USB hubs. - supports suspend/resume of both the platform device and the root hub; supports remote wakeup of the root hub (but NOT the platform device) by USB devices. - does NOT support ISO transfers (nobody has asked for them). - is PIO-only. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: add sl811_cs supportDavid Brownell2005-05-311-0/+1
| | | | | | | | | | | | This adds support for a CF-card USB Host adapter, the Ratoc REX-CFU1U, by wrapping a PCMCIA driver around the existing "sl811-hcd" platform driver. This CF card is especially useful for PDAs, which currently tend to have no other solution for USB host capability. From: Botond Botyanszki <boti@rocketmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+10
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud