summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget
Commit message (Collapse)AuthorAgeFilesLines
* usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen()Yoshihiro Shimoda2017-07-181-3/+3
| | | | | | | | | | | | | This patch fixes an issue that unexpected behavior happens when both the interrupt handler and renesas_usb3_ep_enable() are called. In this case, since usb3_start_pipen() checked the usb3_ep->started, but the flags was not protected. So, this patch protects the flag by usb3->lock. Since renesas_usb3_ep_enable() for EP0 will be not called, this patch doesn't take care of usb3_start_pipe0(). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmacYoshihiro Shimoda2017-07-181-0/+6
| | | | | | | | | | | The dedicated dmac can transfer a zero-length-packet (zlp) if some bits of the USB_COM_CON register. However, the commit 2d4aa21a73ba ("usb: gadget: udc: renesas_usb3: add support for dedicated DMAC") didn't set the bits to 1. So, this patch fixes it. Fixes: 2d4aa21a73b ("usb: gadget: udc: renesas_usb3: add support for dedicated DMAC) Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd()Yoshihiro Shimoda2017-07-181-1/+1
| | | | | | | | | | | | | The commit 2d4aa21a73ba ("usb: gadget: udc: renesas_usb3: add support for dedicated DMAC") has a bug in the renesas_usb3_dma_free_prd(). The size of dma_free_coherent() should be the same with dma_alloc_coherent() Otherwise, this code causes a WARNING by mm/page_alloc.c when renesas_usb3_dma_free_prd() is called. So, this patch fixes it. Fixes: 2d4aa21a73ba ("usb: gadget: udc: renesas_usb3: add support for dedicated DMAC") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: f_uac2: endianness fixes.Ruslan Bilovol2017-07-181-11/+14
| | | | | | | | | As per USB spec, multiple-bytes fields are stored in little-endian order. Use CPU<->LE helpers for such fields. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: f_uac1: endianness fixes.Ruslan Bilovol2017-07-181-10/+10
| | | | | | | | | As per USB spec, multiple-bytes fields are stored in little-endian order. Use CPU<->LE helpers for such fields. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: udc: start_udc() can be statickbuild test robot2017-07-181-3/+3
| | | | | | | | | | | Fixes the following Sparse warnings: >> drivers/usb/gadget/udc/snps_udc_plat.c:31:6: sparse: symbol 'start_udc' was not declared. Should it be static? >> drivers/usb/gadget/udc/snps_udc_plat.c:41:6: sparse: symbol 'stop_udc' was not declared. Should it be static? >> drivers/usb/gadget/udc/snps_udc_plat.c:79:6: sparse: symbol 'udc_drd_work' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: udc: USB_SNP_CORE should depend on HAS_DMAGeert Uytterhoeven2017-07-171-1/+2
| | | | | | | | | | | | | | | | | | | | | If NO_DMA=y: ERROR: "usb_gadget_map_request" [drivers/usb/gadget/udc/snps_udc_core.ko] undefined! ERROR: "dma_pool_destroy" [drivers/usb/gadget/udc/snps_udc_core.ko] undefined! ERROR: "usb_gadget_unmap_request" [drivers/usb/gadget/udc/snps_udc_core.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/gadget/udc/snps_udc_core.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/gadget/udc/snps_udc_core.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/gadget/udc/snps_udc_core.ko] undefined! As USB_SNP_CORE is selected by USB_SNP_UDC_PLAT and USB_AMD5536UDC, these should depend on HAS_DMA, too. For USB_AMD5536UDC, this is already fulfilled through the dependency on USB_PCI (PCI implies HAS_DMA). Add dependencies on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: udc: USB_RENESAS_USB3 should depend on HAS_DMAGeert Uytterhoeven2017-07-171-1/+1
| | | | | | | | | | | | | If NO_DMA=y: ERROR: "usb_gadget_map_request" [drivers/usb/gadget/udc/renesas_usb3.ko] undefined! ERROR: "usb_gadget_unmap_request" [drivers/usb/gadget/udc/renesas_usb3.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/gadget/udc/renesas_usb3.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: f_mass_storage: Fix the logic to iterate all common->lunsAxel Lin2017-07-171-1/+1
| | | | | | | | | | It is wrong to do --i in the for loop. Fixes: dd02ea5a3305 ("usb: gadget: mass_storage: Use static array for luns") Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* Merge tag 'sound-4.13-rc1' of ↵Linus Torvalds2017-07-061-6/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This development cycle resulted in a fair amount of changes in both core and driver sides. The most significant change in ALSA core is about PCM. Also the support of of-graph card and the new DAPM widget for DSP are noteworthy changes in ASoC core. And there're lots of small changes splat over the tree, as you can see in diffstat. Below are a few highlights: ALSA core: - Removal of set_fs() hackery from PCM core stuff, and the code reorganization / optimization thereafter - Improved support of PCM ack ops, and a new ABI for improved control/status mmap handling - Lots of constifications in various codes ASoC core: - The support of of-graph card, which may work as a better generic device for a replacement of simple-card - New widget types intended mainly for use with DSPs ASoC drivers: - New drivers for Allwinner V3s SoCs - Ensonic ES8316 codec support - More Intel SKL and KBL works - More device support for Intel SST Atom (mostly for cheap tablets and 2-in-1 devices) - Support for Rockchip PDM controllers - Support for STM32 I2S and S/PDIF controllers - Support for ZTE AUD96P22 codecs HD-audio: - Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks for HP and Dell machines - A few more fixes for i915 component binding" * tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (418 commits) ALSA: hda - Fix unbalance of i915 module refcount ASoC: Intel: Skylake: Remove driver debugfs exit ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h ALSA: hda/realtek - Remove GPIO_MASK ALSA: hda/realtek - Fix typo of pincfg for Dell quirk ALSA: pcm: add a documentation for tracepoints ALSA: atmel: ac97c: fix error return code in atmel_ac97c_probe() ALSA: x86: fix error return code in hdmi_lpe_audio_probe() ASoC: Intel: Skylake: Add support to read firmware registers ASoC: Intel: Skylake: Add sram address to sst_addr structure ASoC: Intel: Skylake: Debugfs facility to dump module config ASoC: Intel: Skylake: Add debugfs support ASoC: fix semicolon.cocci warnings ASoC: rt5645: Add quirk override by module option ASoC: rsnd: make arrays path and cmd_case static const ASoC: audio-graph-card: add widgets and routing for external amplifier support ASoC: audio-graph-card: update bindings for amplifier support ASoC: rt5665: calibration should be done before jack detection ASoC: rsnd: constify dev_pm_ops structures. ASoC: nau8825: change crosstalk-bypass property to bool type ...
| * Merge tag 'asoc-v4.13' of ↵Takashi Iwai2017-07-037-42/+60
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.13 The big news with this release is the of-graph card, this provides a replacement for simple-card that is much more flexibile and scalable, allowing many more systems to use a generic sound card than was possible before: - The of-graph card, finally merged after a long and dedicated effort by Morimoto-san. - New widget types intended mainly for use with DSPs. - New drivers for Allwinner V3s SoCs, Ensonic ES8316, several classes of x86 machine, Rockchip PDM controllers, STM32 I2S and S/PDIF controllers and ZTE AUD96P22 CODECs.
| * \ Merge branch 'for-linus' into for-nextTakashi Iwai2017-06-073-9/+9
| |\ \ | | | | | | | | | | | | For applying more ALSA timer cleanups.
| * | | usb: gadget: u_uac1: Kill set_fs() usageTakashi Iwai2017-06-021-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the new API to perform the in-kernel buffer copy, we can get rid of set_fs() usage in this driver, finally. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2017-07-053-21/+13
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...
| * \ \ \ Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-06-214-26/+16
| |\ \ \ \ | | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two entries being added at the same time to the IFLA policy table, whilst parallel bug fixes to decnet routing dst handling overlapping with the dst gc removal in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | net: manual clean code which call skb_put_[data:zero]yuan linyu2017-06-201-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | networking: make skb_push & __skb_push return void pointersJohannes Berg2017-06-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | networking: make skb_put & friends return void pointersJohannes Berg2017-06-161-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | networking: introduce and use skb_put_data()Johannes Berg2017-06-162-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | networking: convert many more places to skb_put_zero()Johannes Berg2017-06-161-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | Merge tag 'usb-for-v4.13' of ↵Greg Kroah-Hartman2017-06-2034-1752/+3634
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing Felipe writes: usb: changes for v4.13 merge window This time around we have a total of 57 non-merge commits. A list of most important changes follows: - Improvements to dwc3 tracing interface - Initial dual-role support for dwc3 - Improvements to how we handle DMA resources in dwc3 - A new f_uac1 implementation which much more flexible - Removal of AVR32 bits - Improvements to f_mass_storage driver
| * | | | | usb: gadget: add f_uac1 variant based on a new u_audio apiRuslan Bilovol2017-06-196-15/+942
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new function 'f_uac1' (f_uac1 with virtual "ALSA card") that uses recently created u_audio API. Comparing to legacy f_uac1 function implementation it doesn't require any real Audio codec to be present on the device. In f_uac1 audio streams are simply sinked to and sourced from a virtual ALSA sound card created using u_audio API. Legacy f_uac1 approach is to write audio samples directly to existing ALSA sound card f_uac1 approach is more generic/flexible one - create an ALSA sound card that represents USB Audio function and allows to be used by userspace application that may choose to do whatever it wants with the data received from the USB Host and choose to provide whatever it wants as audio data to the USB Host. f_uac1 also has capture support (gadget->host) thanks to easy implementation via u_audio. By default, capture interface has 48000kHz/2ch configuration, same as playback channel has. f_uac1 descriptors naming convention uses f_uac2 driver naming convention that makes it more common and meaningful. Comparing to f_uac1_legacy, the f_uac1 doesn't have volume/mute functionality. This is because the f_uac1 volume/mute feature unit was dummy implementation since that driver creation (2009) and never had any real volume control or mute functionality, so there is no any difference here. Since f_uac1 functionality, exposed interface to userspace (virtual ALSA card), input parameters are so different comparing to f_uac1_legacy, that there is no any reason to keep them in the same file/module, and separate function was created. g_audio can be built using one of existing UAC functions (f_uac1, f_uac1_legacy or f_uac2) Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: function: make current f_uac1 implementation legacyRuslan Bilovol2017-06-197-51/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before introducing new f_uac1 function (with virtual ALSA card) make current implementation legacy. This includes renaming of existing files, some variables, config options and documentation Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: f_uac2: split out audio coreRuslan Bilovol2017-06-196-636/+845
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Abstract the peripheral side ALSA sound card code from the f_uac2 function into a component that can be called by various functions, so the various flavors can be split apart and selectively reused. Visible changes: - add uac_params structure to pass audio paramteres for g_audio_setup - make ALSA sound card's name configurable - add [in/out]_ep_maxpsize - allocate snd_uac_chip structure during g_audio_setup - add u_audio_[start/stop]_[capture/playback] functions Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: f_uac2: remove platform driver/device creationRuslan Bilovol2017-06-191-79/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify f_uac2 by removing platform driver/device creation; use composite's usb_gadget device as parent for sound card and for debug prints. This removes extra layer of code without any functional change. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: function: f_uac1: implement get_alt()Ruslan Bilovol2017-06-191-1/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 7e4da3fcf7c9 ("usb: gadget: composite: Test get_alt() presence instead of set_alt()") f_uac1 function became broken because it doesn't have get_alt() callback implementation and composite framework never set altsetting 1 for audiostreaming interface. On host site it looks like: [424339.017711] 21:1:1: usb_set_interface failed (-32) Since host can't set altsetting 1, it can't start playing audio. In order to fix it implemented get_alt along with minor improvements (error conditions checking) similar to what existing f_uac2 has. Cc: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: udc: atmel: Remove unnecessary macrosAlexandre Belloni2017-06-192-12/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 46ddd79e893b ("usb: gadget: udc: atmel: Remove AVR32 bits from the driver") left the accessor macros introduced by commit a3dd3befd7cb ("usb: gadget: atmel_usba: use endian agnostic IO on ARM"). They can now be removed. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: bdc: 64-bit pointer capability checkSrinath Mannam2017-06-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Corrected the register to check the 64-bit pointer capability state. 64-bit pointer implementation capability was checking in wrong register, which causes the BDC enumeration failure in 64-bit memory address. Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: mv_udc: Handle return value of clk_prepare_enable.Arvind Yadav2017-06-151-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: mass_storage: set msg_registered after msg registeredLi Jun2017-06-131-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If there is no UDC available, the msg register will fail and this flag will not be set, but the driver is already added into pending driver list, then the module removal modprobe -r can not remove the driver from the pending list. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: udc: renesas_usb3: add support for dedicated DMACYoshihiro Shimoda2017-06-131-0/+392
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB3.0 peripheral controller on R-Car SoCs has a dedicated DMAC. The DMAC needs a "PRD table" in system memory and the DMAC can have four PRD tables. This patch adds support for the DMAC. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: udc: atmel: Remove AVR32 bits from the driverAndy Shevchenko2017-06-132-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AVR32 is gone. Now it's time to clean up the driver by removing leftovers that was used by AVR32 related code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: udc: add a 'function' sysfs fileFelipe Balbi2017-06-131-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This file will print out the name of the currently running USB Gadget Driver. It can be read even when there are no functions loaded. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: dummy: implement ->udc_set_speed()Felipe Balbi2017-06-131-16/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the code which was part of pullup() to the newly introduced method. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: core: introduce ->udc_set_speed() methodFelipe Balbi2017-06-131-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes, the gadget driver we want to run has max_speed lower than what the UDC supports. In such situations, UDC might want to make sure we don't try to connect on speeds not supported by the gadget driver (e.g. super-speed capable dwc3 with high-speed capable g_midi) because that will just fail. In order to make sure this situation never happens, we introduce a new optional ->udc_set_speed() method which can be implemented by interested UDC drivers. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: udc: Add Synopsys UDC Platform driverRaviteja Garimella2017-06-135-20/+409
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds platform driver support for Synopsys UDC. A new driver file (snps_udc_plat.c) is created for this purpose where the platform driver registration is done based on OF node. Currently, UDC integrated into Broadcom's iProc SoCs (Northstar2 and Cygnus) work with this driver. New members are added to the UDC data structure for having platform device support along with extcon and phy support. Kconfig and Makefiles are modified to select platform driver for compilation. Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: udc: Provide correct arguments for 'dma_pool_create'Raviteja Garimella2017-06-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the argument from NULL to a struct device for the dma_pool_create call during dma init. Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: udc: make debug prints compatible with both pci and platform ↵Raviteja Garimella2017-06-133-15/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devices This patch adds a struct device member to UDC data structure and makes changes to the arguments of dev_err and dev_dbg calls so that the debug prints work for both pci and platform devices. Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: udc: Rename amd5536udc driver file based on IPRaviteja Garimella2017-06-132-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames the amd5536udc.c that has the core driver functionality of Synopsys UDC to snps_udc_core.c The symbols exported here can be used by any UDC driver that uses the same Synopsys IP. Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: configfs: use hexadecimal values and new lineStefan Agner2017-06-131-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Other unsigned properties return hexadecimal values, follow this convention when printing b_vendor_code too. Also add newlines to the OS Descriptor support related properties, like other sysfs files use. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: configfs: make qw_sign attribute symmetricStefan Agner2017-06-131-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently qw_sign requires UTF-8 character to set, but returns UTF-16 when read. This isn't obvious when simply using cat since the null characters are not visible, but hexdump unveils the true string: # echo MSFT100 > os_desc/qw_sign # hexdump -C os_desc/qw_sign 00000000 4d 00 53 00 46 00 54 00 31 00 30 00 30 00 |M.S.F.T.1.0.0.| Make qw_sign symmetric by returning an UTF-8 string too. Also follow common convention and add a new line at the end. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: Allow a non-SuperSpeed gadget to support LPMJohn Youn2017-06-021-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit allows a gadget that does not support SuperSpeed to indicate that it supports LPM. It does this by setting the 'lpm_capable' flag in the gadget structure. If a gadget sets this, the composite gadget framework will set the bcdUSB to 0x0201 to indicate that this supports BOS descriptors, and also return a USB 2.0 Extension descriptor as part of the BOS descriptor set. See USB 2.0 LPM ECN Section 3. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: composite: Exclude SS Dev Cap DescJohn Youn2017-06-021-23/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't send the SuperSpeed USB Device Capability descriptor if the gadget is not capable of SuperSpeed. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: function: f_fs: Move epfile waitqueue to ffs_data.Jerry Zhang2017-06-022-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were individual waitqueues for each epfile but eps_enable would iterate through all of them, resulting in essentially the same wakeup time. The waitqueue represents the function being enabled, so a central waitqueue in ffs_data makes more sense and is less redundant. Also use wake_up_interruptible to reflect use of wait_event_interruptible. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Jerry Zhang <zhangjerry@google.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: function: f_fs: Let ffs_epfile_ioctl wait for enable.Jerry Zhang2017-06-021-39/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows users to make an ioctl call as the first action on a connection. Ex, some functions might want to get endpoint size before making any i/os. Previously, calling ioctls before read/write would depending on the timing of endpoints being enabled. ESHUTDOWN is now a possible return value and ENODEV is not, so change docs accordingly. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Jerry Zhang <zhangjerry@google.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: remove redundant self assignmentStefan Agner2017-06-021-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The assignment ret = ret is redundant and can be removed. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: udc-xilinx: clean up a variable nameDan Carpenter2017-05-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "ep->udc->lock" and "udc->lock" are the same thing. It confuses Smatch if we don't use the same name consistently. Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: udc: add null check before pointer dereferenceGustavo A. R. Silva2017-05-171-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add null check before dereferencing dev->regs pointer inside net2280_led_shutdown() function. Addresses-Coverity-ID: 101783 Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: fix the comment with regards to DocBookMauro Carvalho Chehab2017-05-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB gadget documentation is not at DocBook anymore. The main file was converted to ReST, and stored at Documentation/driver-api/usb/gadget.rst, but there are still several plain text files related to gadget under Documentation/usb. So, be generic and just mention documentation without specifying where it is. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | | | | usb: gadget: f_uac2: calculate wMaxPacketSize before endpoint matchSekhar Nori2017-05-171-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calculate wMaxPacketSize before endpoint matching the descriptor is found. This allows audio gadget to be used with controllers which have a shortage or unavailability of endpoints that can handle max packet size of 1023 (FS) or 1024 (HS). With this audio gadget can be used on TI's OMAP-L138 SoC which has a MUSB HS controller with endpoints having max packet size much less than 1023 or 1024. See mode_2_cfg in drivers/usb/musb/musb_core.c Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
OpenPOWER on IntegriCloud