summaryrefslogtreecommitdiffstats
path: root/drivers/usb/atm
Commit message (Collapse)AuthorAgeFilesLines
* signedness: module_param_array nump argumentAl Viro2007-10-142-2/+2
| | | | | | | ... should be unsigned int Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: cxacru: Use appropriate logging for errorsSimon Arlott2007-10-121-15/+28
| | | | | | | | | | | | | | | | When an error occurs, existing logging uses dbg() so the cause of a problem is hard to determine. Error conditions shouldn't only be properly reported with debugging enabled. A side effect of this change is that when an uninitialised device is started, a log message similar to the following is sent: cxacru 5-2:1.0: receive of cm 0x90 failed (-104) This is normal - the device did not respond so firmware will be loaded. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE: CosmeticStanislaw Gruszka2007-10-121-4/+3
| | | | | | | | | Update copyrights and remove not necessary warning (ueagle-atm works well on suspend/resume). Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE: Do not sleep when device is disconnectedStanislaw Gruszka2007-10-121-8/+19
| | | | | | | | | Do not sleep in kernel thread when device is disconnected, this make faster suspending and module unloading. Use one wait queue for sleeping. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE: Avoid keyboard driver blockingStanislaw Gruszka2007-10-121-11/+20
| | | | | | | | | | | | Ueagle-atm driver load DSP firmware in function, which is running from common workqueue. In some (error) circumstances loading firmware may sleep for long periods (even 60 seconds, depending on timeout). This block keyboard driver, which also use common workqueue. To fix problem use custom workqueue in ueagle-atm. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE: Allow user to choose input interface alternate settingStanislaw Gruszka2007-10-121-16/+12
| | | | | | | | | | Let's user control how much USB bus bandwidth will be reserved by ueagle-atm device. This make possible to share bus with other devices when ueagle-atm driver works in isochronous mode. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE: Devolo and Elsa chipsets supportStanislaw Gruszka2007-10-121-26/+88
| | | | | | | | | | | | Support for Devolo and Elsa chipsets. These chipsets have no information about ADSL annex (line type) encoded in USB descriptors. Driver try to get this information from USB VID and PID or it can be explicitly set by the user through module parameter. Thanks to Johann Hanne, whose make most of this patch. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE: Eagle IV chipset supportStanislaw Gruszka2007-10-121-213/+978
| | | | | | | | | | | Add support to newest chipset of eagle family. It is compatible with older chipsets at USB level. However DSP firmware and CMVs (Configuration and Management Variables) have different format of data and are sent/received by different way. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Remove unneeded pointer intf from speedtch_upload_firmware()Micah Gruber2007-10-121-2/+1
| | | | | | | | | | This trivial patch removes the unneeded pointer intf returned from usb_ifnum_to_if(), which is never used. The check for NULL can be simply done by if (!usb_ifnum_to_if(usb_dev, 2)). Signed-off-by: Micah Gruber <micah.gruber@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE: Remove sysfs files on error caseStanislaw Gruszka2007-08-221-1/+4
| | | | | | | | Bugfix, remove sysfs files when modem fails to boot. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unkill cxacru atm driverOliver Neukum2007-08-221-2/+1
| | | | | | | | | | | it seems like you overdid it a bit in your quest to clean up the use of urb->status. In this driver you read it the first thing, which means that you are in a race against URB completion you'll usually lose, returning -EINPROGRESS. This kills the driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: atm: usbatm: clean up urb->status usageGreg Kroah-Hartman2007-07-191-5/+6
| | | | | | | | This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: atm: ueagle-atm: clean up urb->status usageGreg Kroah-Hartman2007-07-191-2/+4
| | | | | | | | This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: atm: speedtch: clean up urb->status usageGreg Kroah-Hartman2007-07-191-3/+4
| | | | | | | | This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: atm: cxacru: clean up urb->status usageGreg Kroah-Hartman2007-07-191-2/+1
| | | | | | | | This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Freezer: make kernel threads nonfreezable by defaultRafael J. Wysocki2007-07-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: cxacru: Cleanup sysfs attribute codeSimon Arlott2007-07-121-42/+31
| | | | | | | | | | | | | This changes the format of unknown status values to be less verbose and uses an array instead of several different snprintf calls. Since only enum values are assigned to it, poll_state is changed from int to enum. Use abs() for dB values instead of two almost identical return lines. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cxacru: ignore error trying to start ADSL in atm_startSimon Arlott2007-06-081-6/+1
| | | | | | | | | | | | | | | | | | | | The sysfs adsl_status attribute ignores (aside from returning -EIO to the user) any error sending a START/STOP command to the device and there is at least one firmware which never sends a response but appears to work regardless. Therefore atm_start should also continue if an error is received so that such firmware is usable. The official Conexant driver doesn't expect a reply either but this is for another device (E2 router) and a commonly used firmware does respond. Also, there is no point in changing -ECONNRESET to -ETIMEDOUT since nothing ever checks for either of these values. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cxacru: create sysfs attributes in atm_start instead of bindSimon Arlott2007-06-081-20/+25
| | | | | | | | | | | | | | | | | | | | | | Since usbatm doesn't set the usb_interface driver data until after calling bind and heavy_init, it would be NULL when the sysfs attributes are read. Reading the MAC address from atm_dev before atm_dev exists would have been be possible too. Calling create_device_file in atm_start will avoid this problem, and the data is useless until the first status poll runs. However, it must be ready before a status poll does a printk on line status change otherwise userspace could react before the files exist. For completeness I've moved remove_device_file to atm_stop so it's not called in unbind when it's not needed. There's no point starting ADSL if atm_start could still fail either. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usbatm_heavy_init: don't use CLONE_SIGHANDOleg Nesterov2007-05-091-1/+1
| | | | | | | | | | | usbatm_do_heavy_init() calls allow_signal() which plays with parent process's ->sighand. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Duncan Sands <duncan.sands@free.fr> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* header cleaning: don't include smp_lock.h when not usedRandy Dunlap2007-05-081-1/+0
| | | | | | | | | | | | Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: cxacru: ADSL state managementSimon Arlott2007-04-271-9/+227
| | | | | | | | | | | | | | | | | The device has commands to start/stop the ADSL function, so this adds a sysfs attribute to allow it to be started/stopped/restarted. It also stops polling the device for status when the ADSL function is disabled. There are no problems with sending multiple start or stop commands, even with a fast loop of them the device still works. There is no need to protect the restart process from further user actions while it's waiting for 1.5s. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usbatm: Detect usb device shutdown and ignore failed urbsSimon Arlott2007-04-271-0/+3
| | | | | | | | | | | | | | | Detect usb device shutdown and ignore failed urbs. This happens when the driver is unloaded or the device is unplugged. I'm not sure what other urb statuses should be ignored, and the warning message doesn't need to be shown when the module is unloaded or the device is removed. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cxacru: export detailed device info through sysfsSimon Arlott2007-04-271-5/+176
| | | | | | | | | | | | | | | When the device is polled for status there is a lot of useful status information available that is ignored. This patch stores the device info array when the status is polled and adds sysfs files to the usb device to allow userspace to query it. Since the device updates its status internally once a second the poll time is changed to this, and round_jiffies_relative is used to avoid waking the cpu unnecessarily. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usbatm: create sysfs link "device" from atm class device to usb interfaceSimon Arlott2007-04-271-1/+13
| | | | | | | | | | | | | | | | | | | | | | There is currently no path from the ATM device in /sys to the USB device's interface that the driver is using; this patch creates a "device" symlink. It is then possible to get to the cxacru ADSL statistics (http://lkml.org/lkml/2007/2/23/328): /sys/class/atm/cxacru0/device $ ls *_rate *_margin *_attenuation downstream_attenuation downstream_snr_margin upstream_rate downstream_rate upstream_attenuation upstream_snr_margin If this link is not appropriate I'd have to create device files in /sys/class/atm/cxacru0 instead - which seems less appropriate since the ADSL statistics are for the USB device not ATM (which is running over the ADSL). [akpm@linux-foundation.org: cleanups] Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}Arnaldo Carvalho de Melo2007-04-251-1/+3
| | | | | | | To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
* [SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo2007-04-251-1/+1
| | | | | | | To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* [SK_BUFF]: Convert skb->end to sk_buff_data_tArnaldo Carvalho de Melo2007-04-251-2/+2
| | | | | | | | Now to convert the last one, skb->data, that will allow many simplifications and removal of some of the offset helpers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo2007-04-251-5/+5
| | | | | | | | | | | | | | | So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* USB: ueagle-atm.c needs sched.hRandy Dunlap2007-02-161-0/+1
| | | | | | | | | Driver needs sched.h for try_to_freeze(). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: <linux/usb_ch9.h> becomes <linux/usb/ch9.h>David Brownell2007-02-071-1/+1
| | | | | | | | | This moves <linux/usb_ch9.h> to <linux/usb/ch9.h> to reduce some of the clutter of usb header files. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Add include/linux/freezer.h and move definitions from sched.hNigel Cunningham2006-12-071-0/+2
| | | | | | | | | | | | | Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'master' of ↵David Howells2006-12-052-9/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
| * USB: speedtch: Use usb_endpoint_* functionsLuiz Fernando N. Capitulino2006-12-011-2/+2
| | | | | | | | | | | | Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: kmemdup() cleanup in drivers/usb/Eric Sesterhenn2006-12-011-7/+3
| | | | | | | | | | | | | | | | | | replace open coded kmemdup() to save some screen space, and allow inlining/not inlining to be triggered by gcc. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | WorkStruct: make allyesconfigDavid Howells2006-11-223-14/+19
|/ | | | | | Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
* UEAGLE: fix ueagle-atm Oopsmatthieu castet2006-10-171-21/+11
| | | | | | | | | | | | | | | | The array of attribute passed to sysfs_create_group() must be NULL-terminated. The sysfs entries are created before the start of the modem state machine to avoid to stop it in case of errors in sysfs creation. Also {destroy,create}_fs_entries are removed as they do nothing. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix usbatm tiny raceAndrew Morton2006-10-171-1/+1
| | | | | | | | | | | | | | ia64: drivers/usb/atm/usbatm.c: In function `usbatm_do_heavy_init': drivers/usb/atm/usbatm.c:1004: warning: implicit declaration of function `get_current' drivers/usb/atm/usbatm.c:1004: error: invalid type argument of `->' Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* cxacru: add the ZTE ZXDSL 852Duncan Sands2006-10-171-0/+3
| | | | | | | | From http://doc.ubuntu-fr.org/materiel/zxdsl852. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* speedtch: "extended reach"Duncan Sands2006-10-171-16/+77
| | | | | | | | | | | | | | | | | | | | | | The speedtouch modem setup code was reverse engineered many years ago from a prehistoric windows driver. Less ancient windows drivers, even those from a few years ago, perform extra initialization steps which this patch adds to the linux driver. David Woodhouse observed that this initialization along with the firmware bin/sachu3/zzzlp2.eni from the driver at http://www.speedtouch.co.uk/downloads/330/301/UK3012%20Extended.zip improves line sync speeds by about 20%. He provided the original patch, which I've modified to use symbolic names (BMaxDSL, ModemMode, ModemOption) rather than magic numbers. These names may not seem like much of an improvement (after all, what is "ModemOption" exactly?), but they do have one big advantage: they are the names used in the windows registry. I've made them available as module parameters. Thanks are due to Aurelio Arroyo, who noticed the relationship between these magic numbers and the entries in Phonebook.ini. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usbatm: fix tiny raceDuncan Sands2006-10-171-4/+1
| | | | | | | | | | If usbatm_do_heavy_init finishes before usbatm_heavy_init writes the pid, the disconnect method could shoot down the wrong process if the pid has been recycled. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE : comestic changesmatthieu castet2006-10-171-18/+24
| | | | | | | | | | | | | | | | | | | Hi, this patch does some cosmetic changes : - dump firwmare version as soon as possible and export it on sysfs - hint about wrong cmv/dsp - Display a message to warn user when the modem is ready : it can help people to detect problems on the line without debug trace - Fix wrong indent - display modem type (pots/isdn) - increase version number Signed-off-by: Matthieu Castet <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE : use interruptible sleepmatthieu castet2006-10-171-3/+3
| | | | | | | | | | | | this patch use wait_event_interruptible_timeout and msleep_interruptible beacause uninterruptible sleep (task state 'D') is counted as 1 towards load average, like running processes. Signed-off-by: Matthieu Castet <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE : be suspend friendlymatthieu castet2006-10-171-0/+3
| | | | | | | | | this patch avoid that the kernel thread block the suspend process. Some work is still need to recover after a resume. Signed-off-by: Matthieu Castet <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-054-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* Still more typo fixesMatt LaPlante2006-10-031-1/+1
| | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
* USB: fix __must_check warnings in drivers/usb/atm/Greg Kroah-Hartman2006-09-271-40/+34
| | | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USBATM: remove no-longer needed #includeDuncan Sands2006-06-211-1/+0
| | | | | | | | We #include <linux/netdevice.h> only because <linux/etherdevice.h> needed it, but didn't #include it itself. But that's been fixed now. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USBATM: remove pointless inlineDuncan Sands2006-06-211-1/+1
| | | | | | | Remove pointless inline. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USBATM: fix modinfo outputDuncan Sands2006-05-081-4/+4
| | | | | | | | | | Because of the way stringify works, using an expression like 64 * 1024 for UDSL_MAX_BUF_SIZE results in 64 * 1024 turning up in the modinfo output instead of 65536. So use 65536 directly (this was the only way I found of fixing this). Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud