summaryrefslogtreecommitdiffstats
path: root/drivers/serial/cpm_uart
Commit message (Collapse)AuthorAgeFilesLines
* tty: move drivers/serial/ to drivers/tty/serial/Greg Kroah-Hartman2011-01-137-1981/+0
| | | | | | | | | | | | | | | The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl> Cc: Michael H. Warfield <mhw@wittsend.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* serial: cpu_uart: Remove unused uart_cpm_port fieldsBaurzhan Ismagulov2010-11-111-6/+0
| | | | | | | AFAICT, these fields are not used anywhere. Signed-off-by: Baurzhan Ismagulov <ibr@radix50.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* serial: cpm_uat: reducing CPM serial latencyBaurzhan Ismagulov2010-11-111-0/+19
| | | | | | | | | | | Setting Rx FIFO size to 1 reduces reader process wakeup latency up to 20x for baud rates <= 9600. This patch sets the Rx FIFO size to 1 for baud rates <= 9600 or if low latency has been requested for the tty. Signed-off-by: Michael Trimarchi <michael@gandalf.sssup.it> Signed-off-by: Bruno Morelli <bruno@evidence.eu.com> Signed-off-by: Baurzhan Ismagulov <ibr@radix50.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* of/device: Replace struct of_device with struct platform_deviceGrant Likely2010-08-061-2/+2
| | | | | | | | | | | | | | | | of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' into for-nextJiri Kosina2010-08-041-64/+79
|\
| * serial: cpm_uart: implement the cpm_uart_early_write() function for console pollDongdong Deng2010-06-301-64/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | The cpm_uart_early_write() function which was used for console poll isn't implemented in the cpm uart driver. Implementing this function both fixes the build when CONFIG_CONSOLE_POLL is set and allows kgdboc to work via the cpm uart. Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Reviewed-by: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | comment typo fixes: charater => characterThomas Weber2010-07-191-1/+1
|/ | | | | | | | Fix typo in comments. Replace charater with character. Characteristics too. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* of: Remove duplicate fields from of_platform_driverGrant Likely2010-05-221-2/+5
| | | | | | | | | | | | | | | | .name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
* of: Always use 'struct device.of_node' to get device node pointer.Grant Likely2010-05-181-1/+1
| | | | | | | | | | | | The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-302-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* tty: cpm_uart: use resource_size()Tobias Klauser2010-03-191-2/+2
| | | | | | | | | | | | Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Fix build of cpm_uart due to core changesBenjamin Herrenschmidt2009-09-241-1/+1
| | | | | | | | Commit ebd2c8f6d2ec4012c267ecb95e72a57b8355a705 "serial: kill off uart_info" broke the build of this driver, this fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* serial: kill off uart_infoAlan Cox2009-09-191-1/+1
| | | | | | | | We moved this into uart_state, now move the fields out of the separate structure and kill it off. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* cpm_uart: Don't use alloc_bootmem in cpm_uart_cpm2.cMark Ware2009-07-291-1/+1
| | | | | | | | This is another alloc_bootmem() -> kzalloc() change, this time to fix the non-fatal badness caused when booting with a cpm2_uart console. Signed-off-by: Mark Ware <mware@elphinstone.net> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console.Scott Wood2009-04-061-4/+4
| | | | | | | | | | Previously, if udbg was using the CPM uart, and the normal CPM uart driver was enabled, but the console was directed elsewhere, udbg would not be stopped prior to initialization. This resulted in udbg hanging forever waiting for the CPM to process a descriptor. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: Initialize port.dev before it's used.Scott Wood2009-04-061-3/+3
| | | | | | | | Previously, this caused NULL to sometimes be passed as a device to the DMA code. With recent DMA changes, that now causes a BUG(). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: fix non-console port startup bugXiaotian Feng2009-03-091-2/+12
| | | | | | | | | | After UART interrupt handler is installed and rx is enabled, if an rx interrupt comes before hardware init, rx->cur will be updated. Then the hardware init will reset BD and make rx->cur out of sync, move the hardware init code before request_irq. Signed-off-by: Xiaotian Feng <xiaotian.feng@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'genirq-v28-for-linus' of ↵Linus Torvalds2008-10-201-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu and x86/uv. The sparseirq branch is just preliminary groundwork: no sparse IRQs are actually implemented by this tree anymore - just the new APIs are added while keeping the old way intact as well (the new APIs map 1:1 to irq_desc[]). The 'real' sparse IRQ support will then be a relatively small patch ontop of this - with a v2.6.29 merge target. * 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits) genirq: improve include files intr_remapping: fix typo io_apic: make irq_mis_count available on 64-bit too genirq: fix name space collisions of nr_irqs in arch/* genirq: fix name space collision of nr_irqs in autoprobe.c genirq: use iterators for irq_desc loops proc: fixup irq iterator genirq: add reverse iterator for irq_desc x86: move ack_bad_irq() to irq.c x86: unify show_interrupts() and proc helpers x86: cleanup show_interrupts genirq: cleanup the sparseirq modifications genirq: remove artifacts from sparseirq removal genirq: revert dynarray genirq: remove irq_to_desc_alloc genirq: remove sparse irq code genirq: use inline function for irq_to_desc genirq: consolidate nr_irqs and for_each_irq_desc() x86: remove sparse irq from Kconfig genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n ...
| * drivers/serial: use nr_irqsYinghai Lu2008-10-161-1/+1
| | | | | | | | | | Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | cpm_uart: Pass actual dev ptr to dma_* in ucc and cpm_uart serialBecky Bruce2008-09-193-6/+9
|/ | | | | | | | We're currently passing NULL, and really shouldn't be. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-By: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: Add generic clock API support to set baudratesLaurent Pinchart2008-07-282-7/+20
| | | | | | | | | | This patch introduces baudrate setting support via the generic clock API. When present the optional device tree clock property is used instead of fsl-cpm-brg. Platforms can then define complex clock schemes, to output the serial clock on an external pin for instance. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: Modem control lines supportLaurent Pinchart2008-07-282-3/+47
| | | | | | | | | | | | This patch replaces the get_mctrl/set_mctrl stubs with modem control line read/write access through the GPIO lib. Available modem control lines are described in the device tree using GPIO bindings. The driver expect a GPIO pin for each of the CTS, RTS, DCD, DSR, DTR and RI signals. Unused control lines can be left out. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm1: don't send break on TX_STOP, don't interrupt RX/TX when adjusting ↵Nye Liu2008-07-241-7/+14
| | | | | | | | | | | | | | | | | | | termios parameters Before setting STOP_TX, set _brkcr to 0 so the SMC does not send a break character. The driver appears to properly re-initialize _brkcr when the SMC is restarted. Do not interrupt RX/TX when the termios is being adjusted; it results in corrupted characters appearing on the line. Cc: Vitaly Bordug <vbordug@ru.mvista.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kgdb: kgdboc console poll hooks for cpm uartJason Wessel2008-07-231-1/+94
| | | | | | | | Add in console polling hooks for the cpm uart for use with kgdb and kgdboc. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> CC: galak@kernel.crashing.org
* port_fixups: Fix ups for tty port changesAlan Cox2008-07-221-1/+1
| | | | | | | | I missed the cpm_uart one. Thanks to Kumar Gala for reporting it. A double check found samsung also needed fixing up. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cpm_uart: Support uart_wait_until_sent()Laurent Pinchart2008-07-141-0/+6
| | | | | | | | | | Set port->fifosize to the software FIFO size, and update the port timeout when the baud rate is modified. SCC ports have an optional 32 byte hardware FIFO which is currently not taken into account, as there is no documented way to check when the FIFO becomes empty. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: Fix cpm uart corruption with PREEMPT_RTRune Torgersen2008-07-141-0/+14
| | | | | | | | | Fix CPM serial port corruption when running with CONFIG_PREEMPT_RT. Userland usage of console, and kernel printf's were stepping on each others toes. Also only take lock if not in an oops. Signed-off-by: Rune Torgersen <runet@innovsys.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: Remove !CONFIG_PPC_CPM_NEW_BINDING codeKumar Gala2008-06-266-838/+1
| | | | | | | Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: fix whitespace issuesKumar Gala2008-06-266-12/+12
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* serial: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-04-301-1/+1
| | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [POWERPC] cpm_uart: Allocate DPRAM memory for SMC ports on CPM2-based platforms.Laurent Pinchart2008-04-174-10/+78
| | | | | | | | | | | | | | | | | | | This patch allocates parameter RAM for SMC serial ports without relying on previous initialisation by a boot loader or a wrapper layer. SMC parameter RAM on CPM2-based platforms can be allocated anywhere in the general-purpose areas of the dual-port RAM. The current code relies on the boot loader to allocate a section of general-purpose CPM RAM and gets the section address from the device tree. This patch modifies the device tree address usage to reference the SMC parameter RAM base pointer instead of a pre-allocated RAM section and allocates memory from the CPM dual-port RAM when initialising the SMC port. CPM1-based platforms are not affected. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Remove pointless casts from void pointersJeff Garzik2008-02-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | Mostly in and around irq handlers. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Karsten Keil <kkeil@suse.de> Acked-by: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: David Brownell <david-b@pacbell.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.cJochen Friedrich2008-01-281-1/+1
| | | | | | | | | Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the includes accordingly. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Fix compile error if CONFIG_STX_GP3 is definedKumar Gala2008-01-231-1/+1
| | | | | | | cpmux is need in all cases, having wrapped by the ifndef CONFIG_STX_GP3 was causing a compile error. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Move CPM command handling into the cpm driversJochen Friedrich2007-12-132-12/+2
| | | | | | | | | | | This patch moves the CPM command handling into commproc.c for CPM1 and cpm2_common.c. This is yet another preparation to get rid of drivers accessing the CPM via the global cpmp. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: Scott Wood <scottwood@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
* [POWERPC] cpm: Describe multi-user ram in its own device node.Scott Wood2007-10-041-2/+2
| | | | | | | | | | | | | | | | | | | | | The way the current CPM binding describes available multi-user (a.k.a. dual-ported) RAM doesn't work well when there are multiple free regions, and it doesn't work at all if the region doesn't begin at the start of the muram area (as the hardware needs to be programmed with offsets into this area). The latter situation can happen with SMC UARTs on CPM2, as its parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't support moving it. It is now described with a muram node, similar to QE. The current CPM binding is sufficiently recent (i.e. never appeared in an official release) that compatibility with existing device trees is not an issue. The code supporting the new binding is shared between cpm1 and cpm2, rather than remain separated. QE should be able to use this code as well, once minor fixes are made to its device trees. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] cpm_uart: Issue STOP_TX command before initializing console.Scott Wood2007-10-031-0/+3
| | | | | | | This prevents some bootloader/bootwrapper characters from being lost. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] cpm_uart: sparse fixesScott Wood2007-10-036-183/+192
| | | | | | | | Mostly a bunch of direct access to in/out conversions, plus a few cast removals, __iomem annotations, and miscellaneous cleanup. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] cpm_uart: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING ↵Scott Wood2007-10-036-25/+260
| | | | | | | | | | | | | | | | is set. The existing OF glue code was crufty and broken. Rather than fix it, it has been removed, and the serial driver now talks to the device tree directly. The non-CONFIG_PPC_CPM_NEW_BINDING code can go away once CPM platforms are dropped from arch/ppc (which will hopefully be soon), and existing arch/powerpc boards that I wasn't able to test on for this patchset get converted (which should be even sooner). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Fix cpm_uart driver for cpm1 machinesJochen Friedrich2007-09-281-1/+1
| | | | | | | | | | | in cpm_uart_cpm1.h, DPRAM_BASE is assigned an address derived from cpmp. On ARC=ppc, this is a physical address with 1:1 DMA mapping which can't be used for arithmetric compare operations with virtual addresses returned by cpm_dpram_addr. This patch changes the assignment to use cpm_dpram_addr as well, like in cpm_uart_cpm2.h. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] CPM_UART: Use inline function form of eieioKumar Gala2007-07-101-1/+1
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] CPM_UART: Removed __init from cpm_uart_init_portdesc to fix warningKumar Gala2007-05-093-3/+3
| | | | | | | | | cpm_uart_init_portdesc is referenced from non-init code and thus we were getting the following warning: WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:cpm_uart_init_portdesc from .text between 'cpm_uart_init' (at offset 0x18020) and 'cpm_uart_drv_remove' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] CPM_UART: cpm_uart_set_termios should take ktermios, not termiosScott Wood2007-05-091-1/+2
| | | | | | | This eliminates some warnings. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Change rheap functions to use ulongs instead of pointersTimur Tabi2007-05-092-4/+4
| | | | | | | | | | | | | | | | | | | | The rheap allocation functions return a pointer, but the actual value is based on how the heap was initialized, and so it can be anything, e.g. an offset into a buffer. A ulong is a better representation of the value returned by the allocation functions. This patch changes all of the relevant rheap functions to use a unsigned long integers instead of a pointer. In case of an error, the value returned is a negative error code that has been cast to an unsigned long. The caller can use the IS_ERR_VALUE() macro to check for this. All code which calls the rheap functions is updated accordingly. Macros IS_MURAM_ERR() and IS_DPERR(), have been deleted in favor of IS_ERR_VALUE(). Also added error checking to rh_attach_region(). Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* SPIN_LOCK_UNLOCKED cleanup in drivers/serialMilind Arun Choudhary2007-05-081-6/+6
| | | | | | | | SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [POWERPC] Fix compile failure in cpm_uart_cpm2Paul Gortmaker2007-02-161-1/+1
| | | | | | | | Fix bug that exists in kernel.org since 2.6.17rc4 - compiles fail if CONFIG_SERIAL_CPM_SMC is defined. Tested on a board using SMC1 console. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560adsVitaly Bordug2007-02-072-6/+0
| | | | | | | | | | | | | | | | | | | | Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the current kernel. Current patch fixes it, as well as other inconsistencies expressed, that do not permit targets from working properly: - Updated dts with a chosen node with interrupt controller, - fixed messed device IDs among CPM2 SoC devices, - corrected odd header name and fixed type in defines, - Added 82xx subdir to the powerpc/platforms Makefile, missed during initial commit, - new solely-powerpc header file for 8260 family (was using one from arch/ppc, this one cleaned up from the extra stuff), in fact for now a placeholder to get the board-specific includes for stuff not yet capable to live with devicetree peeks only - Fixed couple of misprints in reference mpc8272 dts. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] cpm_uart: OF-related fix for CPM1Vitaly Bordug2007-02-071-7/+8
| | | | | | | | | | This makes cpm uart able to work using OF-passed parameters in case of CPM stuff (found on most mpc8xx reference and custom boards). The idea is to keep ppc stuff working yet making it able to be used for powerpc. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] CPM_UART: Fix inconsistency of function definitionKalle Pokki2006-12-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | The below hunk was missed from the recent patch, and now, there are somewhat inconsistent definitions: in cpm_uart.h: int __init cpm_uart_init_portdesc(void); in cpm_uart_cpm1.c: int __init cpm_uart_init_portdesc(void) { } in cpm_uart_cpm2.c: int cpm_uart_init_portdesc(void) { } Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] CPM_UART: Fix non-console initialisationKalle Pokki2006-11-103-7/+8
| | | | | | | | | | The cpm_uart driver is initialised incorrectly, if there is a frame buffer console, and CONFIG_SERIAL_CPM_CONSOLE is defined. The driver fails to call cpm_uart_init_portdesc() and set_lineif() in this case. Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud