summaryrefslogtreecommitdiffstats
path: root/drivers/serial/cpm_uart
Commit message (Collapse)AuthorAgeFilesLines
* [POWERPC] CPM_UART: Fix inconsistency of function definitionKalle Pokki2006-12-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | The below hunk was missed from the recent patch, and now, there are somewhat inconsistent definitions: in cpm_uart.h: int __init cpm_uart_init_portdesc(void); in cpm_uart_cpm1.c: int __init cpm_uart_init_portdesc(void) { } in cpm_uart_cpm2.c: int cpm_uart_init_portdesc(void) { } Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] CPM_UART: Fix non-console initialisationKalle Pokki2006-11-103-7/+8
| | | | | | | | | | The cpm_uart driver is initialised incorrectly, if there is a frame buffer console, and CONFIG_SERIAL_CPM_CONSOLE is defined. The driver fails to call cpm_uart_init_portdesc() and set_lineif() in this case. Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] CPM_UART: Fix non-console transmitKalle Pokki2006-11-101-3/+2
| | | | | | | | | | | | | | | | | The SMC and SCC hardware transmitter is enabled at the wrong place. Simply writing twice to the non-console port, like $ echo asdf > /dev/ttyCPM1 $ echo asdf > /dev/ttyCPM1 puts the shell into endless uninterruptible sleep, since the transmitter is stopped after the first write, and is not enabled before the shutdown function of the second write. Thus the transmit buffers are never emptied. Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* Remove all inclusions of <linux/config.h>Dave Jones2006-10-041-1/+0
| | | | | | kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
* fix file specification in commentsUwe Zeisberger2006-10-032-2/+2
| | | | | | | Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* POWERPC: Bring the fs_no calculation to the relevant SoC enumerationVitaly Bordug2006-09-211-3/+6
| | | | | | | | | | | | | | The fs_no mean used to be fs_enet driver driven, hence it was an enumeration across all the possible fs_enet "users" in the SoC. Now, with QE on the pipeline, and to make DTS descriptions more clear, fs_no features relevant SoC part number, with additional field to describe the SoC type. Another reason for that is now not only fs_enet is going to utilize those stuff. There might be UART, HLDC, and even USB, so to prevent confusion and be ready for upcoming OF_device transfer, fs_enet and cpm_uart drivers were updated in that concern, as well as the relevant DTS. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
* POWERPC: overhaul with cpm2_map mechanismVitaly Bordug2006-09-211-2/+2
| | | | | | | | | Incorporating the new way of cpm2 immr access, introduced in the previous patch, into CPM2 peripheral devices (fs_enet and cpm_uart). Both ppc and powerpc approved working( real actions taken in powerpc only, ppc just has a wrapper to keep init stuff consistent). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
* POWERPC: Get rid of remapping the whole immrVitaly Bordug2006-09-212-44/+88
| | | | | | | | | | | | | | | | | The stuff below cleans up the code attempting to remap the whole cpm2_immr early, as well as places happily assuming that fact. This is more like the 2.4 legacy stuff, and is at least confusing and unclear now. To keep the world comfortable, a new mechanism is introduced: before accessing specific immr register/register set, one needs to map it, using cpm2_map(<reg>), for instance, access to CPM command register will look like volatile cpm_cpm2_t *cp = cpm2_map(im_cpm); keeping the code clear, yet without "already defined somewhere" cpm2_immr. So far, unmapping code is not implemented, but it's not a big deal to add it, if the whole idea makes sense. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
* cpm_uart: make it possible to utilize from powerpcVitaly Bordug2006-09-212-13/+11
| | | | | | | | Driver core has been updated to make use of the new powerpc OF-inspired platform devices, yet keeping compatibility to the vast board list from ppc. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-303-3/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] ppc32 CPM_UART: various fixes for pq2 uart usersVitaly Bordug2006-05-262-4/+6
| | | | | | | | | | | | This fixes various odd things that missed update together with cpm_uart platform_device move. Unified resources names, restructurisation, etc. Also, addressed issue with recent phys/virt translation rework. Being cache-coherent, CPM2's do alloc_bootmem() for the console stuff, and it was used to treat console buffer descriptor mapping 1:1 (as in CPM1 case), which is definitely wrong. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc32 CPM_UART: fixes and improvementsVitaly Bordug2006-05-034-11/+43
| | | | | | | | | | | A number of small issues are fixed, and added the header file, missed from the original series. With this, driver should be pretty stable as tested among both platform-device-driven and "old way" boards. Also added missing GPL statement , and updated year field on existing ones to reflect code update. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc32 CPM_UART: Fixed break send on SCCVitaly Bordug2006-05-031-1/+5
| | | | | | | | | | | SCC uart sends a break sequence each time it is stopped with the CPM_CR_STOP_TX command. That means that each time an application closes the serial device, a break is transmitted. To fix this, graceful tx stop is issued for SCC. Signed-off-by: David Jander <david.jander@protonic.nl> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc32 CPM_UART: Fixed odd address translationsVitaly Bordug2006-04-284-26/+50
| | | | | | | | | | | Current address translation methods can produce wrong results, because virt_to_bus and vice versa may not produce correct offsets on dma-allocated memory. The right way is, while tracking both phys and virt address of the window that has been allocated for boffer descriptors, and use those numbers to compute the offset and make translation properly. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc32 CPM_UART: Convert to use platform devicesVitaly Bordug2006-04-284-111/+220
| | | | | | | | | | | This is intended to make the driver code more generic and flexible, to get rid of board-specific layouts within driver, and generic rehaul, yet keeping compatibility with the existing stuff utilizing it, being compatible with legacy behavior (but with complaints that legacy mode used). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [SERIAL] PPC32 CPM_UART: update to utilize the new TTY flip APIVitaly Bordug2006-02-081-9/+4
| | | | | | | | This replaces old direct usage of tty->flip stuff with relative flip API calls. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [SERIAL] uart_port iotype member should use UPIO_*Russell King2006-02-051-6/+6
| | | | | | Convert usage of SERIAL_IO_* to UPIO_*. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ppc32: cpm_uart: fix xchar sendingAristeu Sergio Rozanski Filho2006-01-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | while using SCC as uart and as serial console at same time I got this: [ 138.214258] Oops: kernel access of bad area, sig: 11 [#1] [ 138.218832] PREEMPT [ 138.221021] NIP: C0105C48 LR: C0105E60 SP: C03D5D10 REGS: c03d5c60 TRAP: 0300 Not tainted [ 138.229280] MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 [ 138.234713] DAR: 00000000, DSISR: C0000000 [ 138.238745] TASK = c0349420[693] 'sh' THREAD: c03d4000 [ 138.243754] Last syscall: 6 [ 138.246402] GPR00: FEFFFFFF C03D5D10 C0349420 C01FB094 00000011 00000000 C1ECFBBC C01F24B0 [ 138.254602] GPR08: FF002820 00000000 FF0028C0 00000000 19133615 A0CBCD5E 02000300 00000000 [ 138.262804] GPR16: 00000000 01FF9E4C 00000000 7FA9A770 00000000 00000000 1003E2A8 00000000 [ 138.271003] GPR24: 100562F4 7F9B6EF4 C0210000 C02A5338 C01FB094 00000000 C01FB094 C1F14574 [ 138.279376] NIP [c0105c48] cpm_uart_tx_pump+0x4c/0x22c [ 138.284419] LR [c0105e60] cpm_uart_start_tx+0x38/0xb0 [ 138.289361] Call trace: [ 138.291762] [c0105e60] cpm_uart_start_tx+0x38/0xb0 [ 138.296547] [c010277c] uart_send_xchar+0x88/0x118 [ 138.301244] [c01029a0] uart_unthrottle+0x6c/0x138 [ 138.305942] [c00ece10] check_unthrottle+0x60/0x64 [ 138.310641] [c00ecec4] reset_buffer_flags+0xb0/0x138 [ 138.315595] [c00ecf64] n_tty_flush_buffer+0x18/0x78 [ 138.320465] [c00e81b0] tty_ldisc_flush+0x64/0x7c [ 138.325078] [c010410c] uart_close+0xf0/0x2c8 [ 138.329348] [c00e9c48] release_dev+0x724/0x8d4 [ 138.333790] [c00e9e18] tty_release+0x20/0x3c [ 138.338061] [c006e544] __fput+0x178/0x1e0 [ 138.342076] [c006c43c] filp_close+0x54/0xac [ 138.346261] [c0002d90] ret_from_syscall+0x0/0x44 [ 138.352386] note: sh[693] exited with preempt_count 2 a easy way to reproduce it is log into the system using ssh and do: cat >/dev/ttyCPM0 then, switch to minicom and write some stuff on it back to ssh, a control C produce the oops this happens because uart_close calls uart_shutdown which frees xmit.buf, currently used by xchar sending in cpm_uart_tx_pump(), which seems wrong. the attached patch fixes the oops and also fixes xchar sending. Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] Update email address for KumarKumar Gala2005-11-133-3/+3
| | | | | | | | Changed jobs and the Freescale address is no longer valid. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpm_uart: Fix baseaddress for SMC 1 and 2Kumar Gala2005-09-051-0/+2
| | | | | | | | | | | | | Base addess register for SMC 1 and 2 are never initialized. This means that they will not work unless a bootloader already configured them. The DPRAM already have space reserved, this patch just makes sure the base addess register is updated correctly on initialization. Signed-off-by: Rune Torgersen <runet@innovsys.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpm_uart: use schedule_timeout instead of direct call to scheduleKumar Gala2005-09-051-6/+7
| | | | | | | | | use schedule_timeout instead of direct call to schedule Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpm_uart: Fix 2nd serial port on MPC8560 ADSKumar Gala2005-09-051-0/+9
| | | | | | | | | | | The 2nd serial port on the MPC8560 ADS was not being configured correctly and thus could not be used as a console. Updated the defconfig for the board to configure the proper SCC channel for the 2nd serial port. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [SERIAL] Clean up and fix tty transmission start/stopingRussell King2005-08-311-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The start_tx and stop_tx methods were passed a flag to indicate whether the start/stop was from the tty start/stop callbacks, and some drivers used this flag to decide whether to ask the UART to immediately stop transmission (where the UART supports such a feature.) There are other cases when we wish this to occur - when CTS is lowered, or if we change from soft to hard flow control and CTS is inactive. In these cases, this flag was false, and we would allow the transmitter to drain before stopping. There is really only one case where we want to let the transmitter drain before disabling, and that's when we run out of characters to send. Hence, re-jig the start_tx and stop_tx methods to eliminate this flag, and introduce new functions for the special "disable and allow transmitter to drain" case. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [PATCH] cpm_uart: needs some love to compile with GCC4.0.1Kumar Gala2005-08-091-7/+7
| | | | | | | | | | | | | | | | | | Fixed problems so we can build with gcc-4.0.1 Signed-off-by: Peter Schaefer-Hutter <peter.schaefer-hutter@tfk-racoms.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] cpm_uart: Fix dpram allocation and non-console uartsKumar Gala2005-08-093-65/+116
|/ | | | | | | | | | | | * Makes dpram allocations work * Makes non-console UART work on both 8xx and 82xx * Fixed whitespace in files that were touched Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Pantelis Antoniou <panto@intracom.gr> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpm_uart: use DPRAM for early consoleMarcelo Tosatti2005-07-271-1/+1
| | | | | | | | | | | | | | | | | | m8xx_cpm_hostalloc() can't rely on using the coherent DMA allocator early on boot because the VM is not fully up yet. Change it to use the on-board DPRAM instead. The current code relies on the "bootmem_page" allocated by m8xx_cpm_reset(), which must be killed. This is done in v2.4 but has never been forward ported to v2.6. Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Cc: Pantelis Antoniou <panto@intracom.gr> Cc: Kumar Gala <kumar.gala@freescale.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ppc32: add Freescale MPC885ADS board supportAndrei Konovalov2005-07-051-1/+31
| | | | | | | | | | | | | | | | | | This patch adds the Freescale MPC86xADS board support. The supported devices are SMC UART and 10Mbit ethernet on SCC1. The manual for the board says that it "is compatible with the MPC8xxFADS for software point of view". That's why this patch extends FADS instead of introducing a new platform. FEC is not supported as the "combined FCC/FEC ethernet driver" driver by Pantelis Antoniou should replace the current FEC driver. Signed-off-by: Gennadiy Kurtsman <gkurtsman@ru.mvista.com> Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com> Acked-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpm_uart: Route SCC2 pins for the STx GP3 boardMatt Porter2005-06-211-0/+9
| | | | | | | | | Adds SCC2 pin routing specific to the GP3 board. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-167-0/+1985
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud