summaryrefslogtreecommitdiffstats
path: root/drivers/serial/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* [Blackfin] serial driver: Add flow control support to bf54xSonic Zhang2008-02-021-2/+2
| | | | | | Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* [Blackfin] serial driver: ADSP-BF52x arch/mach supportMichael Hennerich2008-02-021-1/+1
| | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* atmel_serial: add DMA supportChip Coldwell2008-02-081-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is based on the DMA-patch by Chip Coldwell for the AT91/AT32 serial USARTS, with some tweaks to make it apply neatly on top of the other patches in this series. The RX and TX code has been moved to a tasklet and reworked a bit. Instead of depending on the ENDRX and TIMEOUT bits in CSR, we simply grab as much data as we can from the DMA buffers. I think this closes a race where the ENDRX bit is set after we read CSR but before we read RPR, although I haven't confirmed this. Similarly, the two TX handlers (ENDTX and TXBUFE) have been combined into one. Since the current code only uses a single TX buffer, there's no point in handling those interrupts separately. This also fixes a DMA sync bug in the original patch. [linux@bohmer.net: rebased onto irq-splitup patch] [hskinnemoen@atmel.com: moved to tasklet, fixed dma bug, misc cleanups] [hskinnemoen@atmel.com: atmel_serial dma: Misc fixes and cleanups] Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-2.6.25' of ↵Linus Torvalds2008-02-071-6/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (69 commits) [POWERPC] Add SPE registers to core dumps [POWERPC] Use regset code for compat PTRACE_*REGS* calls [POWERPC] Use generic compat_sys_ptrace [POWERPC] Use generic compat_ptrace_request [POWERPC] Use generic ptrace peekdata/pokedata [POWERPC] Use regset code for PTRACE_*REGS* requests [POWERPC] Switch to generic compat_binfmt_elf code [POWERPC] Switch to using user_regset-based core dumps [POWERPC] Add user_regset compat support [POWERPC] Add user_regset_view definitions [POWERPC] Use user_regset accessors for GPRs [POWERPC] ptrace accessors for special regs MSR and TRAP [POWERPC] Use user_regset accessors for SPE regs [POWERPC] Use user_regset accessors for altivec regs [POWERPC] Use user_regset accessors for FP regs [POWERPC] mpc52xx: fix compile error introduce when rebasing patch [POWERPC] 4xx: PCIe indirect DCR spinlock fix. [POWERPC] Add missing native dcr dcr_ind_lock spinlock [POWERPC] 4xx: Fix offset value on Warp board [POWERPC] 4xx: Add 440EPx Sequoia ehci dts entry ...
| * Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xx ↵Paul Mackerras2008-02-071-6/+6
| |\ | | | | | | | | | into for-2.6.25
| | * [POWERPC] mpc512x: Add MPC512x PSC support to MPC52xx psc driverJohn Rigby2008-02-061-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add 512x support using the psc_ops framework established with the previous patch. All 512x PSCs share the same interrupt so add IRQF_SHARED to irq flags. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | dz: update kconfig descriptionMaciej W. Rozycki2008-02-071-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reformat the Kconfig entries and update descriptions for accuracy. Select the driver by default for configurations of interest. For the curious: 32BIT means only 32-bit DECstations support the device, not that the driver is not 64-bit clean; I have not checked that either though. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | SC26XX: New serial driver for SC2681 uartsThomas Bogendoerfer2008-02-061-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New serial driver for SC2681/SC2691 uarts. Older SNI RM400 machines are using these chips for onboard serial ports. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Torben Mathiasen <device@lanana.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | serial: use SGI_HAS_ZILOG for IP22_ZILOG dependsThomas Bogendoerfer2008-02-061-4/+4
|/ / | | | | | | | | | | | | | | | | | | | | - Use SGI_HAS_ZILOG for IP22_ZILOG depends - remove IP22 from description, because the driver works on more than IP22 SGI machines Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | SERIAL_NETX_CONSOLE provides console for NetX, not IMXUwe Kleine-König2008-02-031-2/+2
| | | | | | | | | | Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* | m68knommu: configure support for new ColdFire serial driverGreg Ungerer2008-02-011-0/+24
|/ | | | | | | Add configure support for new ColdFire serial driver. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [POWERPC] qe-uart: add support for Freescale QUICCEngine UARTTimur Tabi2008-01-231-0/+10
| | | | | | | | Add file ucc_uart.c, a serial device driver for the Freescale QUICCEngine. Update the Kconfig and Makefile accordingly. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Blackfin arch: punt CONFIG_BFIN -- we already have CONFIG_BLACKFINMike Frysinger2007-11-231-1/+1
| | | | | | Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin serial driver Kconfig: depend on DMA not being enabled rather than ↵Mike Frysinger2007-10-211-1/+1
| | | | | | | | a specific DMA size Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* typo fixesMatt LaPlante2007-10-201-3/+3
| | | | | | | | | | | | Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* [POWERPC] Optionally use new device number for pmac_zilogDavid Woodhouse2007-09-221-0/+25
| | | | | | | | | | | | | This adds the option for the pmac_zilog driver to use the major/minor numbers recently allocated specifically for it (/dev/ttyPZn) instead of the /dev/ttySn numbers. The advantage of doing this is that it allows the pmac_zilog and 8250 drivers to coexist. The disadvantage of doing this is that it is a user-visible ABI change and it will break existing working setups on powermacs, and could be confusing to users. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* fix SERIAL_CORE_CONSOLE driver dependenciesAdrian Bunk2007-09-111-4/+4
| | | | | | | | | | | | | SERIAL_BFIN=m or SERIAL_MUX=m shouldn't allow SERIAL_CORE_CONSOLE=y. Additionally, this patch fixes whitespace instead of tabs at the SERIAL_MUX_CONSOLE option. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: fix vr41xx_siu serial console supportYoichi Yuasa2007-07-311-1/+1
| | | | | | | | | The serial console can select only SERIAL_VR41XX=y. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* revert "x86, serial: convert legacy COM ports to platform devices"Andrew Morton2007-07-311-9/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert 7e92b4fc345f5b6f57585fbe5ffdb0f24d7c9b26. It broke Sébastien Dugué's machine and Jeff said (persuasively) This seems like it will break decades-long-working stuff, in favor of breaking new ground in our favorite area, "trusting the BIOS." It's just not worth it for serial ports, IMO. Serial ports are something that just shouldn't break at this late stage in the game. My new Intel platform boxes don't even have serial ports, so I question the value of messing with serial port probing even more... because... just wait a year, and your box won't have a serial port either! :) I certainly don't object to the use of platform devices (or isa_driver), but the probe change seems questionable. That's sorta analagous to rewriting the floppy driver probe routine. Sure you could do it... but why risk all that damage and go through debugging all over again? It seems clear from this report that we cannot, should not, trust BIOS for something (a) so simple and (b) that has been working for over a decade. Much discussion ensued and we've decided to have another go at all of this. Cc: Sébastien Dugué <sebastien.dugue@bull.net> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zs: move to the serial subsystemMaciej W. Rozycki2007-07-181-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is a reimplementation of the zs driver for the serial subsystem. Any resemblance to the old driver is purely coincidential. ;-) I do hope I got the handling of modem lines right -- better do not tackle me about the issue unless you feel too good... Any users of the old driver: please note the numbers of the serial lines have now been swapped, i.e. ttyS0 <-> ttyS1 and ttyS2 <-> ttyS3. It has to do with the modem lines mentioned above; basically the port A in a given chip has to be initialised before the port B if you want to use the latter as the serial console (which is usually the case), as operations on modem lines of the serial line associated with the port B access both ports (see the comment at the top of the driver for the details of wiring used). Please update your scripts. This is also the reason each SCC now requests an IRQ once only (as seen in "/proc/interrupts") -- the handler takes care of both ports at once as the line associated with the port B has to take status update interrupts from both ports (and yet the line of the port A takes its own for itself too). The old driver never got it right... Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sb1250-duart.c: SB1250 DUART serial supportMaciej W. Rozycki2007-07-171-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is a driver for the SB1250 DUART, a dual serial port implementation included in the Broadcom family of SOCs descending from the SiByte SB1250 MIPS64 chip multiprocessor. It is a new implementation replacing the old-fashioned driver currently present in the linux-mips.org tree. It supports all the usual features one would expect from a(n asynchronous) serial driver, including modem line control (as far as hardware supports it -- there is edge detection logic missing from the DCD and RI lines and the driver does not implement polling of these lines at the moment), the serial console, BREAK transmission and reception, including the magic SysRq. The receive FIFO threshold is not maintained though. The driver was tested with a SWARM board which uses a BCM1250 SOC (which is dual MIPS64 CMP) and has both ports of the single DUART implemented wired externally. Both were tested. Testing included using the ports as terminal lines at 1200bps (which is the ports minimum), 115200bps and a couple of random speeds inbetween. The modem lines were verified to operate correctly. No testing was performed with a use as a network interface, like with SLIP or PPP. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: convert early_uart to earlycon for 8250Yinghai Lu2007-07-161-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and include/asm-x86_64/serial.h. the serial8250_ports need to be probed late in serial initializing stage. the console_init=>serial8250_console_init=> register_console=>serial8250_console_setup will return -ENDEV, and console ttyS0 can not be enabled at that time. need to wait till uart_add_one_port in drivers/serial/serial_core.c to call register_console to get console ttyS0. that is too late. Make early_uart to use early_param, so uart console can be used earlier. Make it to be bootconsole with CON_BOOT flag, so can use console handover feature. and it will switch to corresponding normal serial console automatically. new command line will be: console=uart8250,io,0x3f8,9600n8 console=uart8250,mmio,0xff5e0000,115200n8 or earlycon=uart8250,io,0x3f8,9600n8 earlycon=uart8250,mmio,0xff5e0000,115200n8 it will print in very early stage: Early serial console at I/O port 0x3f8 (options '9600n8') console [uart0] enabled later for console it will print: console handover: boot [uart0] -> real [ttyS0] Signed-off-by: <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Blackfin serial driver: supporting BF548-EZKIT serial portRoy Huang2007-07-121-3/+43
| | | | | | | Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Blackfin arch: kgdb specific codeSonic Zhang2007-06-291-1/+1
| | | | | | Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* [ARM] 4332/2: KS8695: Serial driverAndrew Victor2007-05-111-0/+17
| | | | | | | | | A driver for the KS8695 internal UART. Based on the 2.6.9 driver from Micrel. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [S390] Kconfig: menus with depends on HAS_IOMEM.Martin Schwidefsky2007-05-101-0/+1
| | | | | | | Add "depends on HAS_IOMEM" to a number of menus to make them disappear for s390 which does not have I/O memory. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* x86, serial: convert legacy COM ports to platform devicesBjorn Helgaas2007-05-081-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make x86 COM ports into platform devices and don't probe for them if we have PNP. This prevents double discovery, where a device was found both by the legacy probe and by 8250_pnp, e.g., serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A This also means IRDA devices without a UART PNP ID will no longer be claimed by the serial driver, which might require changes in IRDA drivers and administration. In addition to this patch, you may need to configure a setserial init script, e.g., /etc/init.d/setserial, so it doesn't poke legacy UART stuff back in. On Debian, "dpkg-reconfigure setserial" with the "kernel" option does this. To force the old legacy probe behavior even when we have PNPBIOS or ACPI, load the new legacy_serial module (or build 8250 static) with the "legacy_serial.force" option. [akpm@linux-foundation.org: fix makefiles] Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Keith Owens <kaos@ocs.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu CASTET <castet.matthieu@free.fr> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Russell King <rmk+serial@arm.linux.org.uk> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* blackfin: serial driverBryan Wu2007-05-071-0/+94
| | | | | | | | | | | This patch implements the driver necessary use the Analog Devices Blackfin processor's Serial Port. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* RM9000 serial driverThomas Koeller2007-05-071-0/+9
| | | | | | | | | | | | | | Add support for the integrated serial ports of the MIPS RM9122 processor and its relatives. The patch also does some whitespace cleanup. [akpm@linux-foundation.org: cleanups] Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2007-02-191-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (117 commits) [ARM] 4058/2: iop32x: set ->broken_parity_status on n2100 onboard r8169 ports [ARM] 4140/1: AACI stability add ac97 timeout and retries [ARM] 4139/1: AACI record support [ARM] 4138/1: AACI: multiple channel support for IRQ handling [ARM] 4211/1: Provide a defconfig for ns9xxx [ARM] 4210/1: base for new machine type "NetSilicon NS9360" [ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PM [ARM] 4221/1: S3C2443: DMA support [ARM] 4220/1: S3C24XX: DMA system initialised from sysdev [ARM] 4219/1: S3C2443: DMA source definitions [ARM] 4218/1: S3C2412: fix CONFIG_CPU_S3C2412_ONLY wrt to S3C2443 [ARM] 4217/1: S3C24XX: remove the dma channel show at startup [ARM] 4090/2: avoid clash between PXA and SA1111 defines [ARM] 4216/1: add .gitignore entries for ARM specific files [ARM] 4214/2: S3C2410: Add Armzone QT2410 [ARM] 4215/1: s3c2410 usb device: per-platform vbus_draw [ARM] 4213/1: S3C2410 - Update definition of ADCTSC_XY_PST [ARM] 4098/1: ARM: rtc_lock only used with rtc_cmos [ARM] 4137/1: Add kexec support [ARM] 4201/1: SMP barriers pair needed for the secondary boot process ... Fix up conflict due to typedef removal in sound/arm/aaci.h
| * [ARM] amba-pl010: add reference to ep93xx to Kconfig help entryLennert Buytenhek2007-02-111-1/+2
| | | | | | | | | | | | Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [PATCH] PNX8550 UART driverVitaly Wool2007-02-141-0/+16
| | | | | | | | | | | | | | | | | | | | | | Add UART support for PNX8330/8550/8950 Philips MIPS-based SoCs. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [POWERPC] Open Firmware serial port driverArnd Bergmann2007-02-141-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This can be used for serial ports that are connected to an OF platform bus but are not autodetected by the lecacy serial support. It will automatically take over devices that come from the legacy serial detection, which usually is only one device. In some cases, rtas may be set up to use the serial port in the firmware, which allows easier debugging before probing the serial ports. In this case, the "used-by-rtas" property must be set by the firmware. This patch also adds code to the legacy serial driver to check for this. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [PATCH] serial: serial_txx9 driver updateAtsushi Nemoto2007-02-111-0/+5
|/ | | | | | | | | | | | | Update the serial_txx9 driver. * Configurable manumum port number. (SERIAL_TXX9_NR_UARTS) * Remove some code which is unneeded if CONFIG_PM=n. * Use PCI_DEVICE() for pci device id table and make it const. * Do not include <asm/irq.h> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kconfig: Standardize "depends" -> "depends on" in Kconfig filesRobert P. J. Day2006-12-121-2/+2
| | | | | | | | | Standardize the miniscule percentage of occurrences of "depends" in Kconfig files to "depends on", and update kconfig-language.txt to reflect that. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] Kconfig refactoring for better menu nestingDon Mullis2006-12-101-27/+26
| | | | | | | | | | | | | | | Refactor Kconfig content to maximize nesting of menus by menuconfig and xconfig. Tested by simultaneously running `make xconfig` with and without patch, and comparing displays. Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Exar quad port serialPaul B Schroeder2006-12-071-0/+11
| | | | | | | | | | | | | | | | | | | | | | This is on our "Envoy" boxes which we have, according to the documentation, an "Exar ST16C554/554D Quad UART with 16-byte Fifo's". The box also has two other "on-board" serial ports and a modem chip. The two on-board serial UARTs were being detected along with the first two Exar UARTs. The last two Exar UARTs were not showing up and neither was the modem. This patch was the only way I could the kernel to see beyond the standard four serial ports and get all four of the Exar UARTs to show up. [akpm@osdl.org: build fix] Signed-off-by: Paul B Schroeder <pschroeder@uplogix.com> Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] serial uartlite driverPeter Korsgaard2006-12-071-0/+19
| | | | | | | | | | | | | | | | | | | Add a driver for the Xilinx uartlite serial controller used in boards with the PPC405 core in the Xilinx V2P/V4 fpgas. The hardware is very simple (baudrate/start/stopbits fixed and no break support). See the datasheet for details: http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf See http://thread.gmane.org/gmane.linux.serial/1237/ for the email thread. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Olof Johansson <olof@lixom.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Kconfig serial typosRandy Dunlap2006-10-201-6/+6
| | | | | | | | | Fix typo (repeated) in serial Kconfig. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] atmel_serial: Support AVR32Haavard Skinnemoen2006-10-041-12/+12
| | | | | | | | | Make CONFIG_SERIAL_ATMEL selectable on AVR32 and #ifdef out some ARM- specific code in the driver. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] at91_serial -> atmel_serial: Kconfig symbolsHaavard Skinnemoen2006-10-041-7/+7
| | | | | | | | | | | Rename the following Kconfig symbols: * CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL * CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE * CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PARISC] Document that D-class can also use serial_muxCarlos O'Donell2006-10-041-4/+5
| | | | | Signed-off-by: Carlos O'Donell <carlos@systemhalted.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* Fix several typos in drivers/Matt LaPlante2006-10-031-3/+3
| | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] fix serial/amba-pl011.c console KconfigPeter Korsgaard2006-09-291-1/+1
| | | | | | | | Fix the Kconfig entry for console on AMBA PL011 to match the code. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* serial: Add SERIAL_SH_SCI_NR_UARTS for sh-sci.Paul Mundt2006-09-271-2/+7
| | | | | | | | sh-sci needs to be able to define its number of ports to support, we do this with a config option, like most other ports do. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* [ARM] 3639/1: S3C2412: serial port supportBen Dooks2006-06-241-3/+6
| | | | | | | | | | Patch from Ben Dooks Serial port support for the on-board UART blocks on the Samsung S3C2412 and S3C2413 UARTs. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-06-221-0/+19
|\ | | | | | | | | | | * 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: [ARM] 3600/1: increase amba-pl010 UART_NR to 8 [ARM] 3571/1: netX: serial driver for Hilscher netX
| * [ARM] 3571/1: netX: serial driver for Hilscher netXSascha Hauer2006-06-191-0/+19
| | | | | | | | | | | | | | | | | | | | | | Patch from Sascha Hauer This patch adds the serial driver for Hilscher's netX network processors. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [ARM] 3592/1: AT91RM9200 Serial driver updateAndrew Victor2006-06-191-8/+9
|/ | | | | | | | | | | | | | | | | | | | | Patch from Andrew Victor This patch includes a number of updates to the AT91RM9200 serial driver. Changes include: 1. Conversion to a platform_driver. [Ivan Kokshaysky] 2. Replaced all references to AT91RM9200 with AT91. This driver can now also be used for the AT91SAM9216. 3. Allow TIOCM_LOOP to configure local loopback mode. 4. Cleaned up the 'read_status_mask' usage and interrupt handler code. [Chip Coldwell] 5. Suspend/resume support. [David Brownell] There are a few 'unused variable' warning when compiling this - I removed the new DMA support to keep this first patch simpler. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [SERIAL] Allow 8250 PCI, PNP, GSC and HP300 support to be disabledRussell King2006-03-291-0/+27
| | | | | | | | | | | Allow the 8250 probe modules to be disabled if we're building for with EMBEDDED enabled. This reduces the kernel size by not including unnecessary probe module support. Original idea from Matt Mackall for PCI only, expanded to others by rmk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud