summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] hpsa: Disable ASPMMatthew Garrett2011-11-141-0/+5
| | | | | | | | | | The Windows driver .inf disables ASPM on hpsa devices. Do the same because the selection of a non default ASPM policy can cause the device to hang. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@kernel.org Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] aacraid: controller hangs if kernel uses non-default ASPM policyVasily Averin2011-11-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Aacraid controller can hang on some nodes if kernel uses non-default (powersave) ASPM policy. Controller hangs shortly after successful load and hardware detection. Scsi error handler detects this hang and tries to restart hardware but it does not help. Initially it was noticed on RHEL6-based openVZ kernel after backporting aacraid driver from mainline (RHEL6 kernel with original driver works well) http://bugzilla.openvz.org/show_bug.cgi?id=2043 This issue happens because default ASPM policy was changed in Red Hat kernels. Therefore guys from Red Hat have noticed this problem long time ago: on Fedora 12 https://bugzilla.redhat.com/show_bug.cgi?id=540478 on Fedora 14 https://bugzilla.redhat.com/show_bug.cgi?id=679385 In RHEL6 kernel this issue was fixed, ASPM was disabled in aacraid driver. In kernel changelog I've found that seems it was done by Matthew Garrett: - [scsi] aacraid: Disable ASPM by default (Matthew Garrett) [599735] However seems this patch was not submitted to mainline. I've reproduced this issue on vanilla 3.1.0 kernel booted with "pcie_aspm.policy=powersave" option, So I believe it makes sense to do it now. Signed-off-by: Vasily Averin <vvs@sw.ru> [mjg: Checking the Windows drivers indicates that they disable ASPM under all circumstances, so:] Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Achim Leubner <Achim_Leubner@pmc-sierra.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] mpt2sas: add missing allocation.Dan Carpenter2011-11-101-0/+5
| | | | | | | | | | | There was supposed to be a kzalloc() here and the compiler complained about it. mpt2sas_scsih.c: In function ‘mpt2sas_scsih_reset_handler’: mpt2sas_scsih.c:2807:21: warning: ‘fw_event’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] Silencing 'killing requests for dead queue'Hannes Reinecke2011-11-091-1/+2
| | | | | | | | | | | | | When we tear down a device we try to flush all outstanding commands in scsi_free_queue(). However the check in scsi_request_fn() is imperfect as it only signals that we _might start_ aborting commands, not that we've actually aborted some. So move the printk inside the scsi_kill_request function, this will also give us a hint about which commands are aborted. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fix WARNING: at drivers/scsi/scsi_lib.c:1704James Bottomley2011-11-091-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Mon, 2011-11-07 at 17:24 +1100, Stephen Rothwell wrote: > Hi all, > > Starting some time last week I am getting the following during boot on > our PPC970 blade: > > calling .ipr_init+0x0/0x68 @ 1 > ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011) > ipr 0000:01:01.0: Found IOA with IRQ: 26 > ipr 0000:01:01.0: Starting IOA initialization sequence. > ipr 0000:01:01.0: Adapter firmware version: 06160039 > ipr 0000:01:01.0: IOA initialized. > scsi0 : IBM 572E Storage Adapter > ------------[ cut here ]------------ > WARNING: at drivers/scsi/scsi_lib.c:1704 > Modules linked in: > NIP: c00000000053b3d4 LR: c00000000053e5b0 CTR: c000000000541d70 > REGS: c0000000783c2f60 TRAP: 0700 Not tainted (3.1.0-autokern1) > MSR: 8000000000029032 <EE,ME,CE,IR,DR> CR: 24002024 XER: 20000002 > TASK = c0000000783b8000[1] 'swapper' THREAD: c0000000783c0000 CPU: 0 > GPR00: 0000000000000001 c0000000783c31e0 c000000000cf38b0 c00000000239a9d0 > GPR04: c000000000cbe8f8 0000000000000000 c0000000783c3040 0000000000000000 > GPR08: c000000075daf488 c000000078a3b7ff c000000000bcacc8 0000000000000000 > GPR12: 0000000044002028 c000000007ffb000 0000000002e40000 000000000099b800 > GPR16: 0000000000000000 c000000000bba5fc c000000000a61db8 0000000000000000 > GPR20: 0000000001b77200 0000000000000000 c000000078990000 0000000000000001 > GPR24: c000000002396828 0000000000000000 0000000000000000 c000000078a3b938 > GPR28: fffffffffffffffa c0000000008ad2c0 c000000000c7faa8 c00000000239a9d0 > NIP [c00000000053b3d4] .scsi_free_queue+0x24/0x90 > LR [c00000000053e5b0] .scsi_alloc_sdev+0x280/0x2e0 > Call Trace: > [c0000000783c31e0] [c000000000c7faa8] wireless_seq_fops+0x278d0/0x2eb88 (unreliable) > [c0000000783c3270] [c00000000053e5b0] .scsi_alloc_sdev+0x280/0x2e0 > [c0000000783c3330] [c00000000053eba0] .scsi_probe_and_add_lun+0x390/0xb40 > [c0000000783c34a0] [c00000000053f7ec] .__scsi_scan_target+0x16c/0x650 > [c0000000783c35f0] [c00000000053fd90] .scsi_scan_channel+0xc0/0x100 > [c0000000783c36a0] [c00000000053fefc] .scsi_scan_host_selected+0x12c/0x1c0 > [c0000000783c3750] [c00000000083dcb4] .ipr_probe+0x2c0/0x390 > [c0000000783c3830] [c0000000003f50b4] .local_pci_probe+0x34/0x50 > [c0000000783c38a0] [c0000000003f5f78] .pci_device_probe+0x148/0x150 > [c0000000783c3950] [c0000000004e1e8c] .driver_probe_device+0xdc/0x210 > [c0000000783c39f0] [c0000000004e20cc] .__driver_attach+0x10c/0x110 > [c0000000783c3a80] [c0000000004e1228] .bus_for_each_dev+0x98/0xf0 > [c0000000783c3b30] [c0000000004e1bf8] .driver_attach+0x28/0x40 > [c0000000783c3bb0] [c0000000004e07d8] .bus_add_driver+0x218/0x340 > [c0000000783c3c60] [c0000000004e2a2c] .driver_register+0x9c/0x1b0 > [c0000000783c3d00] [c0000000003f62d4] .__pci_register_driver+0x64/0x140 > [c0000000783c3da0] [c000000000b99f88] .ipr_init+0x4c/0x68 > [c0000000783c3e20] [c00000000000ad24] .do_one_initcall+0x1a4/0x1e0 > [c0000000783c3ee0] [c000000000b512d0] .kernel_init+0x14c/0x1fc > [c0000000783c3f90] [c000000000022468] .kernel_thread+0x54/0x70 > Instruction dump: > ebe1fff8 7c0803a6 4e800020 7c0802a6 fba1ffe8 fbe1fff8 7c7f1b78 f8010010 > f821ff71 e8030398 3120ffff 7c090110 <0b000000> e86303b0 482de065 60000000 > ---[ end trace 759bed76a85e8dec ]--- > scsi 0:0:1:0: Direct-Access IBM-ESXS MAY2036RC T106 PQ: 0 ANSI: 5 > ------------[ cut here ]------------ > > I get lots more of these. The obvious commit to point the finger at > is 3308511c93e6 ("[SCSI] Make scsi_free_queue() kill pending SCSI > commands") but the root cause may be something different. Caused by commit f7c9c6bb14f3104608a3a83cadea10a6943d2804 Author: Anton Blanchard <anton@samba.org> Date: Thu Nov 3 08:56:22 2011 +1100 [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev Doesn't completely do the teardown. The true fix is to do a proper teardown instead of hand rolling it Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: stable@kernel.org #2.6.38+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds2011-11-0641-0/+42
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
| * scsi: Fix up files implicitly depending on module.h inclusionPaul Gortmaker2011-10-3125-0/+25
| | | | | | | | | | | | | | | | | | The module.h header was implicitly present everywhere, so files with no explicit include of the module infrastructure would build anyway. We are now removing the implicit include, and so we need to call out the module.h file that we need explicitly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
| * scsi: Add export.h for EXPORT_SYMBOL/THIS_MODULE as requiredPaul Gortmaker2011-10-3116-0/+17
| | | | | | | | | | | | | | | | For the basic SCSI infrastructure files that are exporting symbols but not modules themselves, add in the basic export.h header file to allow the exports. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | Merge branch 'trivial' of ↵Linus Torvalds2011-11-061-14/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scsi: drop unused Kconfig symbol pci: drop unused Kconfig symbol stmmac: drop unused Kconfig symbol x86: drop unused Kconfig symbol powerpc: drop unused Kconfig symbols powerpc: 40x: drop unused Kconfig symbol mips: drop unused Kconfig symbols openrisc: drop unused Kconfig symbols arm: at91: drop unused Kconfig symbol samples: drop unused Kconfig symbol m32r: drop unused Kconfig symbol score: drop unused Kconfig symbols sh: drop unused Kconfig symbol um: drop unused Kconfig symbol sparc: drop unused Kconfig symbol alpha: drop unused Kconfig symbol Fix up trivial conflict in drivers/net/ethernet/stmicro/stmmac/Kconfig as per Michal: the STMMAC_DUAL_MAC config variable is still unused and should be deleted.
| * | scsi: drop unused Kconfig symbolPaul Bolle2011-10-311-14/+0
| | | | | | | | | | | | | | | Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Michal Marek <mmarek@suse.cz>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2011-11-0543-1073/+1751
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits) [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev [SCSI] scsi_dh_alua: Fix the time inteval for alua rtpg commands [SCSI] scsi_transport_iscsi: Fix documentation os parameter [SCSI] mv_sas: OCZ RevoDrive3 & zDrive R4 support [SCSI] libfc: improve flogi retries to avoid lport stuck [SCSI] libfc: avoid exchanges collision during lport reset [SCSI] libfc: fix checking FC_TYPE_BLS [SCSI] edd: Treat "XPRS" host bus type the same as "PCI" [SCSI] isci: overriding max_concurr_spinup oem parameter by max(oem, user) [SCSI] isci: revert bcn filtering [SCSI] isci: Fix hard reset timeout conditions. [SCSI] isci: No need to manage the pending reset bit on pending requests. [SCSI] isci: Remove redundant isci_request.ttype field. [SCSI] isci: Fix task management for SMP, SATA and on dev remove. [SCSI] isci: No task_done callbacks in error handler paths. [SCSI] isci: Handle task request timeouts correctly. [SCSI] isci: Fix tag leak in tasks and terminated requests. [SCSI] isci: Immediately fail I/O to removed devices. [SCSI] isci: Lookup device references through requests in completions. [SCSI] ipr: add definitions for additional adapter ...
| * | | [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdevAnton Blanchard2011-11-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When looking at memory consumption issues I noticed quite a lot of memory in the kmalloc-2048 bucket: OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 6561 6471 98% 2.30K 243 27 15552K kmalloc-2048 Over 15MB. slub debug shows that cfq is responsible for almost all of it: # sort -nr /sys/kernel/slab/kmalloc-2048/alloc_calls 6402 .cfq_init_queue+0xec/0x460 age=43423/43564/43655 pid=1 cpus=4,11,13 In scsi_alloc_sdev we do scsi_alloc_queue but if slave_alloc fails we don't free it with scsi_free_queue. The patch below fixes the issue: OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 135 72 53% 2.30K 5 27 320K kmalloc-2048 # cat /sys/kernel/slab/kmalloc-2048/alloc_calls 3 .cfq_init_queue+0xec/0x460 age=3811/3876/3925 pid=1 cpus=4,11,13 Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> #2.6.38+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] scsi_dh_alua: Fix the time inteval for alua rtpg commandsMoger, Babu2011-11-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects the retry interval for alua rtpg command. Purpose was to retry the commands in seconds. But that was not happening. Reason is msleep takes argument in milliseconds. Also added minor text after successful attach. Signed-off-by: Babu Moger <babu.moger@netapp.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] scsi_transport_iscsi: Fix documentation os parameterMarcos Paulo de Souza2011-11-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes documentation of a parameter of iscsi_bsg_host_add function to silence to make htmldocs Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] mv_sas: OCZ RevoDrive3 & zDrive R4 supportRobin H. Johnson2011-10-311-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the OCZ RevoDrive3/zDrive R4 series, the "OCZ SuperScale Storage Controller" with "Virtualized Controller Architecture 2.0" really seems to be a Marvell 88SE9485 part, with OCZ firmware/BIOS. Developed and tested on OCZ RevoDrive3 120GB [PCI 1b85:1021] Should work on: - OCZ RevoDrive3 (2x SandForce 2281) - OCZ RevoDrive3 X2 (4x SandForce 2281) - OCZ zDrive R4 CM84 (4x SandForce 2281) - OCZ zDrive R4 CM88 (8x SandForce 2281) - OCZ zDrive R4 RM84 (4x SandForce 2582) - OCZ zDrive R4 RM88 (8x SandForce 2582) All of this because a friend recently bought a OCZ RevoDrive3 and was bitten by the lack of Linux support. Notes from testing: ------------------- - SMART works. - VPD Device Identification is "OCZ-REVODRIVE3" - Thin provisioning/TRIM seems to be implemented as WRITE SAME UNMAP, with deterministic (non-zero) read after TRIM, but I'm not sure if it works 100% in my testing. - Some of the tuning in the firmware seems to ensure much better performance when in a RAID0 setup than using the two devices seperately. I have not tested booting from the SSD, because all of this was developed and tested remotely from the actual hardware. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Thanks-To: Gordon Pritchard <gordp@sfu.ca> Acked-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] libfc: improve flogi retries to avoid lport stuckVasu Dev2011-10-312-49/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds more cases to do flogi retry, now also retry on getting bad response due to either no ELS response or flogi response payload length not large enough. In those cases flogi was not retried and that was leaving lport offline. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] libfc: avoid exchanges collision during lport resetVasu Dev2011-10-312-9/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently timer delay is large and is using msleep to avoid avoid exchanges collision across lport reset, so instead do this by initializing exches pool indexes during reset also. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] libfc: fix checking FC_TYPE_BLSVasu Dev2011-10-311-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Its checked after skb freed, so instead have fh_type cached and then check FC_TYPE_BLS against cached fh_type value. This wrong check was causing double exch locking as reported by Bhanu at https://lists.open-fcoe.org/pipermail/devel/2011-October/011793.html Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] isci: overriding max_concurr_spinup oem parameter by max(oem, user)Andrzej Jakowski2011-10-313-10/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes bug where max_concurr_spinup oem parameter should be overriden by max_concurr_spinup user parameter. Override should happen only when max_concurr_spinup user parameter is specified in command line (greater than 0). Also this fix shortens variables representing max_conxurr_spinup for oem and user parameters. Signed-off-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] isci: revert bcn filteringDan Williams2011-10-313-281/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The initial bcn filtering implementation was validated on a kernel baseline that predated the switch to new libata error handling. Also, prior to that conversion we borrowed the mvsas MVS_DEV_EH approach to prevent the unwanted extra ap->ops->phy_reset(ap) that occurred in the ata_bus_probe() path. After the conversion to new libata eh resets at discovery are more frequent and get filtered prematurely by IDEV_EH. The result is that our bcn filtering has been blocked from running and at discovery and it appears to stall discovery completion to the point of triggering hung task timeouts. So, revert the implementation for now. When it returns it will go into libsas proper. The domain rediscovery that takes place due to ->lldd_I_T_nexus_reset() events should now be properly waited for by the ata_port_wait_eh() call in ata_port_probe(). So the hard coded delay in the isci ->lldd_I_T_nexus_reset() and other libsas drivers should help debounce the libsas thread from seeing temporary device removals. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] isci: Fix hard reset timeout conditions.Jeff Skirvin2011-10-312-42/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A hard reset can timeout before or after the last phy in the port goes away. If after, then notify the OS that the last phy has failed. The recovery for the failed hard reset has been removed. This recovery code was unecessary in that the link would recover from the failure normally by a new link reset sequence or hotplug of the remote device. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] isci: No need to manage the pending reset bit on pending requests.Jeff Skirvin2011-10-313-40/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lldd does not need to look at or manage the pending device reset bit in pending sas_tasks. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] isci: Remove redundant isci_request.ttype field.Jeff Skirvin2011-10-314-60/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the existing IREQ_TMF flag as a request type indicator. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] isci: Fix task management for SMP, SATA and on dev remove.Jeff Skirvin2011-10-314-184/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libsas uses the LLDD abort task interface to handle I/O timeouts in the SATA/STP and SMP discovery paths, so this change will terminate STP/SMP requests. Also, if the device is gone, the lldd will prevent libsas from further escalations in the error handler. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] isci: No task_done callbacks in error handler paths.Jeff Skirvin2011-10-311-55/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libsas will cleanup pending sas_tasks after error handler path functions are called; do not call task_done callbacks. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] isci: Handle task request timeouts correctly.Jeff Skirvin2011-10-312-42/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case where "task" requests timeout (note that this class of requests can also include SATA/STP soft reset FIS transmissions), handle the case where the task was being managed by some call to terminate the task request by completing both the tmf and the aborting process. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] isci: Fix tag leak in tasks and terminated requests.Jeff Skirvin2011-10-311-20/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure terminated requests and completed task tags are freed. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] isci: Immediately fail I/O to removed devices.Jeff Skirvin2011-10-311-10/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case where an I/O fails to start in isci_request_execute, only allow retries if the device is not already gone. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] isci: Lookup device references through requests in completions.Jeff Skirvin2011-10-311-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LLDD needs to obtain a reference to the device through the request itself and not through the domain_device, because the domain_device.lldd_dev is set to NULL early in the lldd_dev_gone call. This relies on the fact that the isci_remote_device object is keeping a seperate reference count of outstanding requests. TODO: unify the request count tracking with the isci_remote_device kref. The failure signature of this condition looks like the following log, where the important bits are the call to lldd_dev_gone followed by a crash in isci_terminate_request_core: [ 229.151541] isci 0000:0b:00.0: isci_remote_device_gone: domain_device = ffff8801492d4800, isci_device = ffff880143c657d0, isci_port = ffff880143c63658 [ 229.166007] isci 0000:0b:00.0: isci_remote_device_stop: isci_device = ffff880143c657d0 [ 229.175317] isci 0000:0b:00.0: isci_terminate_pending_requests: idev=ffff880143c657d0 request=ffff88014741f000; task=ffff8801470f46c0 old_state=2 [ 229.189702] isci 0000:0b:00.0: isci_terminate_request_core: device = ffff880143c657d0; request = ffff88014741f000 [ 229.201339] isci 0000:0b:00.0: isci_terminate_request_core: before completion wait (ffff88014741f000/ffff880149715ad0) [ 229.213414] isci 0000:0b:00.0: sci_controller_process_completions: completion queue entry:0x8000a0e9 [ 229.214401] BUG: unable to handle kernel NULL pointer dereference at 0000000000000228 [ 229.214401] IP:jdskirvi-testlbo [<ffffffffa00a58be>] sci_request_completed_state_enter+0x50/0xafb [isci] [ 229.214401] PGD 13d19e067 PUD 13d104067 PMD 0 [ 229.214401] Oops: 0000 [#1] SMP [ 229.214401] CPU 0 x kernel: [ 226 [ 229.214401] Modules linked in: ipv6 dm_multipath uinput nouveau snd_hda_codec_realtek snd_hda_intel ttm drm_kms_helper drm snd_hda_codec snd_hwdep snd_pcm snd_timer i2c_algo_bit isci snd libsas ioatdma mxm_wmi iTCO_wdt soundcore snd_page_alloc scsi_transport_sas iTCO_vendor_support wmi dca video i2c_i801 i2c_core [last unloaded: speedstep_lib] [ 229.214401] [ 229.214401] Pid: 5, comm: kworker/u:0 Not tainted 3.0.0-isci-11.7.29+ #30.353196] Buffer Intel Corporation Stoakley/Pearlcity Workstation [ 229.214401] RIP: 0010:[<ffffffffa00a58be>] I/O error on dev [<ffffffffa00a58be>] sci_request_completed_state_enter+0x50/0xafb [isci] [ 229.214401] RSP: 0018:ffff88014fc03d20 EFLAGS: 00010046 [ 229.214401] RAX: 0000000000000000 RBX: ffff88014741f000 RCX: 0000000000000000 [ 229.214401] RDX: ffffffffa00b2c90 RSI: 0000000000000017 RDI: ffff88014741f0a0 [ 229.214401] RBP: ffff88014fc03d90 R08: 0000000000000018 R09: 0000000000000000 [ 229.214401] R10: 0000000000000000 R11: ffffffff81a17d98 R12: 000000000000001d [ 229.214401] R13: ffff8801470f46c0 R14: 0000000000000000 R15: 0000000000008000 [ 229.214401] FS: 0000000000000000(0000) GS:ffff88014fc00000(0000) knlGS:0000000000000000 [ 229.214401] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 229.214401] CR2: 0000000000000228 CR3: 000000013ceaa000 CR4: 00000000000406f0 [ 229.214401] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 229.214401] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 229.214401] Process kworker/u:0 (pid: 5, threadinfo ffff880149714000, task ffff880149718000) [ 229.214401] Call Trace: [ 229.214401] <IRQ> [ 229.214401] [<ffffffffa00aa6ce>] sci_change_state+0x4a/0x4f [isci] [ 229.214401] [<ffffffffa00a4ca6>] sci_io_request_tc_completion+0x79c/0x7a0 [isci] [ 229.214401] [<ffffffffa00acf35>] sci_controller_process_completions+0x14f/0x396 [isci] [ 229.214401] [<ffffffffa00abbda>] ? spin_lock_irq+0xe/0x10 [isci] [ 229.214401] [<ffffffffa00ad2cf>] isci_host_completion_routine+0x71/0x2be [isci] [ 229.214401] [<ffffffff8107c6b3>] ? mark_held_locks+0x52/0x70 [ 229.214401] [<ffffffff810538e8>] tasklet_action+0x90/0xf1 [ 229.214401] [<ffffffff81054050>] __do_softirq+0xe5/0x1bf [ 229.214401] [<ffffffff8106d9d1>] ? hrtimer_interrupt+0x129/0x1bb [ 229.214401] [<ffffffff814ff69c>] call_softirq+0x1c/0x30 [ 229.214401] [<ffffffff8100bb67>] do_softirq+0x4b/0xa3 [ 229.214401] [<ffffffff81053d84>] irq_exit+0x53/0xb4 [ 229.214401] [<ffffffff814fffe7>] smp_apic_timer_interrupt+0x83/0x91 [ 229.214401] [<ffffffff814fee53>] apic_timer_interrupt+0x13/0x20 [ 229.214401] <EOI> [ 229.214401] [<ffffffff814f7ad4>] ? retint_restore_args+0x13/0x13 [ 229.214401] [<ffffffff8107af29>] ? trace_hardirqs_off+0xd/0xf [ 229.214401] [<ffffffff8104ea71>] ? vprintk+0x40b/0x452 [ 229.214401] [<ffffffff814f4b5a>] printk+0x41/0x47 [ 229.214401] [<ffffffff81314484>] __dev_printk+0x78/0x7a [ 229.214401] [<ffffffff8131471e>] dev_printk+0x45/0x47 [ 229.214401] [<ffffffffa00ae2a3>] isci_terminate_request_core+0x15d/0x317 [isci] [ 229.214401] [<ffffffffa00af1ad>] isci_terminate_pending_requests+0x1a4/0x204 [isci] [ 229.214401] [<ffffffffa00229f6>] ? sas_phye_oob_error+0xc3/0xc3 [libsas] [ 229.214401] [<ffffffffa00a7d9e>] isci_remote_device_nuke_requests+0xa6/0xff [isci] [ 229.214401] [<ffffffffa00a811a>] isci_remote_device_stop+0x7c/0x166 [isci] [ 229.214401] [<ffffffffa00229f6>] ? sas_phye_oob_error+0xc3/0xc3 [libsas] [ 229.214401] [<ffffffffa00a827a>] isci_remote_device_gone+0x76/0x7e [isci] [ 229.214401] [<ffffffffa002363e>] sas_notify_lldd_dev_gone+0x34/0x36 [libsas] [ 229.214401] [<ffffffffa0023945>] sas_unregister_dev+0x57/0x9c [libsas] [ 229.214401] [<ffffffffa00239c0>] sas_unregister_domain_devices+0x36/0x65 [libsas] [ 229.214401] [<ffffffffa0022cb8>] sas_deform_port+0x72/0x1ac [libsas] [ 229.214401] [<ffffffffa00229f6>] ? sas_phye_oob_error+0xc3/0xc3 [libsas] [ 229.214401] [<ffffffffa0022a34>] sas_phye_loss_of_signal+0x3e/0x42 [libsas] Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] ipr: add definitions for additional adapterWayne Boyer2011-10-312-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the appropriate definition and table entry for an additional adapter. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] scsi_dh: check queuedata pointer before proceeding furtherMoger, Babu2011-10-311-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch validates sdev pointer in scsi_dh_activate before proceeding further. Without this check we might see the panic as below. I have seen this panic multiple times.. Call trace: #0 [ffff88007d647b50] machine_kexec at ffffffff81020902 #1 [ffff88007d647ba0] crash_kexec at ffffffff810875b0 #2 [ffff88007d647c70] oops_end at ffffffff8139c650 #3 [ffff88007d647c90] __bad_area_nosemaphore at ffffffff8102dd15 #4 [ffff88007d647d50] page_fault at ffffffff8139b8cf [exception RIP: scsi_dh_activate+0x82] RIP: ffffffffa0041922 RSP: ffff88007d647e00 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000000093c5 RDX: 00000000000093c5 RSI: ffffffffa02e6640 RDI: ffff88007cc88988 RBP: 000000000000000f R8: ffff88007d646000 R9: 0000000000000000 R10: ffff880082293790 R11: 00000000ffffffff R12: ffff88007cc88988 R13: 0000000000000000 R14: 0000000000000286 R15: ffff880037b845e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 #5 [ffff88007d647e38] run_workqueue at ffffffff81060268 #6 [ffff88007d647e78] worker_thread at ffffffff81060386 #7 [ffff88007d647ee8] kthread at ffffffff81064436 #8 [ffff88007d647f48] kernel_thread at ffffffff81003fba Signed-off-by: Babu Moger <babu.moger@netapp.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] hpsa: detect controller lockupStephen M. Cameron2011-10-302-4/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When controller lockup condition is detected, we should fail all outstanding commands and disable the controller. This will enable multipath solutions to recover gracefully. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] hpsa: fix flush cache transfer lengthStephen M. Cameron2011-10-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We weren't filling in the transfer length of the flush cache command (it transfers 4 bytes of zeroes). Firmware didn't seem to be bothered by this, but it should be fixed. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] hpsa: fix potential array overflow in hpsa_update_scsi_devicesScott Teel2011-10-303-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The currentsd[] array in hpsa_update_scsi_devices had room for 256 devices. The code was iterating over however many physical and logical devices plus an additional number of possible external MSA2XXX controllers, which together could potentially exceed 256. We increased the size of the currentsd array to 1024 + 1024 + 32 + 1 elements to reflect a reasonable maximum possible number of devices which might be encountered. We also don't just walk off the end of the array if the array controller reports more devices than we are prepared to handle, we just ignore the excessive devices. Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] hpsa: rename HPSA_MAX_SCSI_DEVS_PER_HBAScott Teel2011-10-302-15/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename HPSA_MAX_SCSI_DEVS_PER_HBA to HPSA_MAX_DEVICES Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] hpsa: remove unused busy_initializing and busy_scanningStephen M. Cameron2011-10-302-5/+0
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] hpsa: set max sectors instead of taking the defaultStephen M. Cameron2011-10-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the max hardware sectors in the SCSI host template to 8192 to allow for larger i/o's (8192 is the same limit the cciss driver currently has.) Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] qla2xxx: Correct inadvertent clearing of RISC_INTR status.Andrew Vasquez2011-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During heavy I/O (CPU-affinity mode enabled) and CLI/Agent interactions, the driver would report periodic mailbox command timeout statuses. Within the CPU-affinity ISR handler, the driver should check the 'disable-msix-handshake' flag in deciding whether or not to clear HCCRX_CLR_RISC_INT. The mode is not specific to a dedicated queue, instead, applies to the current 'ha' context. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] pmcraid: pmcraid_chr_ioctl uses incorrect argument order to kmalloc()Dave Jones2011-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Size is 1st arg, not second. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] bnx2fc: Bumped version to 1.0.9Bhanu Prakash Gollapudi2011-10-302-2/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] bnx2fc: Handle SRR LS_ACC drop scenarioBhanu Prakash Gollapudi2011-10-301-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When SRR LS_ACC is dropped, the driver was not issuing ABTS for SRR when it times out. Since the target received SRR, it was able to send the XFER_RDY and the the original IO request completed successfully. In this condition ABTS was not sent during bnx2fc_srr_compl(). Fix this by first checking for ELS timeout and issue ABTS before checking if original IO request is complete. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] bnx2fc: Handle ABTS timeout during ulp timeoutBhanu Prakash Gollapudi2011-10-302-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the IO and the corresponding ABTS are not responded by a target, cleanup the IO and issue explicit logout when ulp timer expires while waiting for ABTS to complete. Wait for the session to be ready before returning to the SCSI layer. If the session is not ready let the SCSI-ml escalate the error recovery. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] st: fix race in st_scsi_execute_endPetr Uzel2011-10-301-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The call to complete() in st_scsi_execute_end() wakes up sleeping thread in write_behind_check(), which frees the st_request, thus invalidating the pointer to the associated bio structure, which is then passed to the blk_rq_unmap_user(). Fix by storing pointer to bio structure into temporary local variable. This bug is present since at least linux-2.6.32. CC: stable@kernel.org Signed-off-by: Petr Uzel <petr.uzel@suse.cz> Reported-by: Juergen Groß <juergen.gross@ts.fujitsu.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] Make scsi_free_queue() kill pending SCSI commandsBart Van Assche2011-10-302-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure that SCSI device removal via scsi_remove_host() does finish all pending SCSI commands. Currently that's not the case and hence removal of a SCSI host during I/O can cause a deadlock. See also "blkdev_issue_discard() hangs forever if underlying storage device is removed" (http://bugzilla.kernel.org/show_bug.cgi?id=40472). See also http://lkml.org/lkml/2011/8/27/6. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: <stable@kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] sd: remove arbitrary SD_MAX_DISKS namespace limitDave Kleikamp2011-10-302-13/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no reason to limit the SCSI disk namespace to sdXXX. Add new error messages to sd_probe() in the unlikely event that either ida_get_new() or sd_format_disk_name() fail. Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] mpt2sas: Bump driver version to 10.100.00.00nagalakshmi.nandigama@lsi.com2011-10-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Bump driver vesion to 10.100.00.00 Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] mpt2sas: Fix for Panic when inactive volume is tried deletingnagalakshmi.nandigama@lsi.com2011-10-302-31/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was setting the action to MPI2_CONFIG_ACTION_PAGE_READ_CURRENT, which only returns active volumes. In order to get info on inactive volumes, the driver needs to change the action to MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM, and traverse each config till the iocstatus is MPI2_IOCSTATUS_CONFIG_INVALID_PAGE returned. Added a change in the driver to remove the instance of sas_device object when the driver returns "1" from the slave_configure callback. Also fixed code to report the hot spares to the operating system with a /dev/sg assigned. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] mpt2sas: Fix for issue Port Reset taking long time(around 5 mins) to ↵nagalakshmi.nandigama@lsi.com2011-10-301-17/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | complete while issued during creating a volume This is due to the slave_configuration routine is getting called when host reset is active, and config page reads are failing, and driver attempts to added device with stale config data. To fix the issue, added error checking in slave_configure to check for configuration pages failing, and return "1" so the device is not configured. The config pages are failing if raid volume is configured while issuing a host reset, thus driver is reading stale data and proceeding to attempt to add. The fix is to return error so the volume is not configured. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] mpt2sas: Fix for deadlock between hot plug worker threads and host ↵nagalakshmi.nandigama@lsi.com2011-10-301-12/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | reset context This is due to driver reporting a device missing to the OS then the OS sending a SYNC_CACHE request to driver while the IO queues are locked due to host reset. To fix the issue, the driver will be waking up the port enable context immediately when the driver receives the reply message, instead of waiting on the hot plug worker threads. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | [SCSI] mpt2sas: Fix for dead lock occurring between host_lock and ↵nagalakshmi.nandigama@lsi.com2011-10-301-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sas_device_lock Fix for dead lock occurring between host_lock and sas_device_lock. The deadlock is between two spin locks, between the shost->host_lock and driver ioc->sas_device_lock. The fix is to rearrange the code in the FW/Driver device removal handshake so the ioc->sas_device_lock is not occurring when the shost->host_lock is taken. [jejb: zero initialise sas_address to fix spurious compiler warning] Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
OpenPOWER on IntegriCloud