summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] lpfc 8.2.2 : Style cleanupsJames Smart2007-08-0111-54/+23
| | | | | | | | | - Clean up all instances of mixed tab-space indentation - Clean up sparse build errors - Add appropriate static's Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc 8.2.2 : Miscellaneous Bug FixesJames Smart2007-08-0116-246/+342
| | | | | | | | | | | | | | | | | | | | | | | | | - Fix vport ndlp ref counting errors - Fix use after free of ndlp structure - Use the correct flag to check for LOADING setting. - Fix driver unload bugs (related to shost references) after link down or rscn - Fix up HBQ initialization - Fix port_list locking around driver unload. - Fix references to hostdata as a phba - Fix GFFID type offset to work correctly with big endian structure. - Only call pci_disable_msi if the pci_enable_msi succeeded - Fix vport_delete wait/fail if in discovery - Put a reference on the nameservers ndlp when performing CT traffic. - Remove unbalanced hba unlock. - Fix up HBQ processing - Fix lpfc debugfs discovery trace output for ELS rsp cmpl - Send ADISC when rpi is 0 - Stop FDISC retrying forever - Unable to retrieve correct config parameter for vport - Fix sli_validate_fcp_iocb, sli_sum_iocb, sli_abort_iocb to be vport-aware. - Fix index-out-of-range error in iocb. Spotted by Coverity. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc 8.2.2 : Miscellaneous management and logging modsJames Smart2007-08-017-23/+168
| | | | | | | | | | - Remove the "management_version" sysfs parameter (was unused) - Add HBQ information to lpfc debugfs - Change lpfc_npiv_enable name back to lpfc_enable_npiv (internal stds) - Remove "issue_lip" attribute from the vports transport template Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc 8.2.2 : Rework the lpfc_printf_log() macroJames Smart2007-08-0113-1137/+852
| | | | | | | | | | Rework the lpfc_printf_log() macro so that logging is enabled on a per-vport basis. Used to be on a physical-port basis, thus logging with large numbers of vports became a mess. Required redefinition of the macro, and an update of every use. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc 8.2.2 : Attribute and Parameter splits for vport and physical portJames Smart2007-08-0110-149/+354
| | | | | | | | | | | - Split attributes up into vport and non-vport attributes. - Move vport specific cfg params to vport Many of the vport-specific behaviors were still global attributes on the physical port. Move them to the vport itself. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc 8.2.2 : Fix locking around HBA's port_listJames Smart2007-08-0110-223/+308
| | | | | | | Cleans up a lot of bad behaviors that have been in this area a while Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc 8.2.2 : Error messages and debugfs updatesJames Smart2007-08-019-58/+488
| | | | | | | | | | | Error messages and debugfs updates: - Fix up GID_FT error messages - Enhance debugfs with slow_ring_trace, dumpslim and nodelist information - Add log type (and messages) for vport state changes - Enhance log messages when retries ELS fail Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] initialize shost_data to zeroFUJITA Tomonori2007-08-011-1/+1
| | | | | | | | It's better to initialize host->shost_data to zero like target->starget_data and device->sdev_data. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] ESP: Revert ESP_BUS_TIMEOUT back down to 250David Miller2007-07-311-1/+1
| | | | | | | | | | | | | This reverts d73f5222a618a91452d41c29f5996ce3d9c63673 The bug that made us increase ESP_BUS_TIMEOUT to 275 turned out to be a memset bug on 32-bit sparc. It is better to put this back at the correct timeout value than to leave it increased when there is no reason for doing so. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] dpt_i2o: convert to SCSI hotplug modelMatthew Wilcox2007-07-312-68/+73
| | | | | | | | | | | | - Delete refereces to HOSTS_C - Switch to module_init/module_exit instead of detect/release - Don't pass around the host template and rename it to adpt_template - Switch from scsi_register/scsi_unregister to scsi_host_alloc, scsi_add_host, scsi_scan_host and scsi_host_put. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] qla2xxx: fix panic caused by previous patchSeokmann Ju2007-07-311-0/+14
| | | | | | | - this patch will fix a panic caused by omitted memory allocation for the nvram. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic7xxx: cap maxsync according to correct card limitsJames Bottomley2007-07-311-1/+21
| | | | | | | | | Not doing this can cause cards less than u160 capable to send out PPR offers to devices they can't then deliver on ... causing some devices to get a bit confused. Fix by capping the start syncrate at the appropriate level according to the card capabilities. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] st: Use mutex instead of semaphoreMatthias Kaehlcke2007-07-312-9/+10
| | | | | | | | | The SCSI Tape driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] libsas: fix build dependencies on libataJames Bottomley2007-07-311-1/+2
| | | | | | | | If you have the libsas with ATA support, it needs libata to function. The problem is that if you compile in libsas, you can't build libata as a module (however, vice versa you can). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] gdth: remove redundant PCI stuffJeff Garzik2007-07-312-32/+22
| | | | | | | | | | | | This patch * removes struct members that duplicate pci_dev members * replaces ha->stype usage with ha->pdev->device usage where feasible Signed-off-by: Jeff Garzik <jeff@garzik.org> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Achim Leubner <Achim_Leubner@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] ibmvscsi: use shost_privFUJITA Tomonori2007-07-311-22/+11
| | | | | | Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] ibmvscsi: remove unnecessary map_sg checkFUJITA Tomonori2007-07-311-6/+0
| | | | | | | | | | | | | No need to check use_sg since sg_tablesize is set appropriately in the scsi host template. Brian King's patch (2a7309372fe56ae46c499b772d811ad31c501dd9) did this cleanup but the data buffer accessors patch (written before the patch and merged after it) restored the check. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2007-07-2922-13799/+14757
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (28 commits) [SCSI] mpt fusion: Changes in mptctl.c for logging support [SCSI] mpt fusion: Changes in mptfc.c mptlan.c mptsas.c and mptspi.c for logging support [SCSI] mpt fusion: Changes in mptscsih.c for logging support [SCSI] mpt fusion: Changes in mptbase.c for logging support [SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and addition of mptdebug.h [SCSI] libsas: Fix potential NULL dereference in sas_smp_get_phy_events() [SCSI] bsg: Fix build for CONFIG_BLOCK=n [SCSI] aacraid: fix Sunrise Lake reset handling [SCSI] aacraid: add SCSI SYNCHONIZE_CACHE range checking [SCSI] add easyRAID to the no report luns blacklist [SCSI] advansys: lindent and other large, uninteresting changes [SCSI] aic79xx, aic7xxx: Fix incorrect width setting [SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributes [SCSI] aacraid: draw line in sand, sundry cleanup and version update [SCSI] iscsi_tcp: Turn off bounce buffers [SCSI] libiscsi: fix cmd seqeunce number checking [SCSI] iscsi_tcp, ib_iser Enable module refcounting for iscsi host template [SCSI] libiscsi: make sure session is not blocked when removing host [SCSI] libsas: Remove PCI dependencies [SCSI] simscsi: convert to use the data buffer accessors ...
| * [SCSI] libsas: Fix potential NULL dereference in sas_smp_get_phy_events()Jesper Juhl2007-07-281-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | In sas_smp_get_phy_events() we never test if the call to alloc_smp_req(RPEL_REQ_SIZE) succeeds or fails. That means we run the risk of dereferencing a NULL pointer if it does fail. Far better to test if we got NULL back and in that case return -ENOMEM just as we already do for the other memory allocation in that function. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] aacraid: fix Sunrise Lake reset handlingSalyzyn, Mark2007-07-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch is *much* smaller than the description. I am attempting to answer to those that want to understand an issue that was reported in May this year. If a Sunrise Lake based card that requires an alternate reset mechanism is set up to ignore the commanded IOP_RESET it reports 0x00000010 (IOP_RESET ignored) instead of 0x3803000F (use alternate reset mechanism to reset all cores), and thus the reset platform function decides to switch to IOP_RESET_ALWAYS because the reset platform function parameters indicate that we *need* to reset the card. IOP_RESET_ALWAYS then responds with the 0x3803000F return code, but alas we treat this as an error instead of using the alternate reset mechanism (put a 0x03 into the register offset 0x38). The reset fails, but the fact that the IOP_RESET_ALWAYS command was issued has put the card in a purposeful shutdown state in preparation for the alternate hardware reset to be applied. Yuck. IOP_RESET is ignored in internal production cards, typically to ensure that we catch all adapter lockup issues without the driver progressing further, so this would not appear to be a field issue and thus this patch was destined to be only in the internal Adaptec source tree. IOP_RESET_ALWAYS is reserved for kexec/kdump/FirmwareUpdate/AutomatedTestFrames so we did not function as expected in any case. Also in the past we have had OEMs specifically request that cards not be resetable after a BlinkLED/FirmwareAssert for one reason or another and To head off the possibility that the Sunrise Lake based cards would suffer a similar fate, we propose the enclosed fix. Yinghai Lu of SUN had a pre-production card with IOP_RESET disabled when he reported an issue to the linux kernel list back in May regarding a kexec problem resulting from this reset being ignore. His fix was to update the Firmware to one that did not ignore the IOP_RESET. Previous kernels did not attempt to reset the adapter and that is why it surfaced as a regression in his hands. The current list of aacraid based cards that use Sunrise Lake: 9005:0285:9005:02b5 Adaptec 5445 9005:0285:9005:02b6 Adaptec 5805 9005:0285:9005:02b7 Adaptec 5085 9005:0285:9005:02c3 Adaptec 51205 9005:0285:9005:02c4 Adaptec 51605 9005:0285:9005:02ce Adaptec 51245 9005:0285:9005:02cf Adaptec 51645 9005:0285:9005:02d0 Adaptec 52445 9005:0285:9005:02d1 Adaptec 5405 9005:0285:9005:02b8 ICP ICP5445SL 9005:0285:9005:02b9 ICP ICP5085SL 9005:0285:9005:02ba ICP ICP5805SL 9005:0285:9005:02c5 ICP ICP5125SL 9005:0285:9005:02c6 ICP ICP5165SL 9005:0285:108e:7aac SUN STK RAID REM 9005:0285:108e:0286 SUN STK RAID INT 9005:0285:108e:0287 SUN STK RAID EXT 9005:0285:108e:7aae SUN STK RAID EM All of these are publicly released with IOP_RESET enabled. So there is no immediate need for this patch. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] aacraid: add SCSI SYNCHONIZE_CACHE range checkingSalyzyn, Mark2007-07-281-8/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Customer running an application that issues SYNCHRONIZE_CACHE calls directly noticed the broad stroke of the current implementation in the aacraid driver resulting in multiple applications feeding I/O to the storage causing the issuing application to stall for long periods of time. By only waiting for the current WRITE commands, rather than all commands, to complete; and those that are in range of the SYNCHRONIZE_CACHE call that would associate more tightly with the issuing application before telling the Firmware to flush it's dirty cache, we managed to reduce the stalling. The Firmware itself still flushes all the dirty cache associated with the array ignoring the range, it just does so in a more timely manner. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] add easyRAID to the no report luns blacklistakpm@linux-foundation.org2007-07-281-0/+3
| | | | | | | | | | | | | | | | | | | | According to http://bugzilla.kernel.org/show_bug.cgi?id=5953, the easyRAID returns rubbish to REPORT LUNS. Cc: Natalie Protasevich <protasnb@gmail.com> Cc: Hans-Christian Armingeon <mog.johnny@gmx.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] advansys: lindent and other large, uninteresting changesMatthew Wilcox2007-07-271-13692/+14569
| | | | | | | | | | | | | | | | | | | | | | - Run Lindent - Move advansys_detect and advansys_release to the end of the file - Split advansys_board_found out of advansys_detect - Rename a few variables, such as shp to shost and pci_devp to pdev - Turn STATIC into static Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] aic79xx, aic7xxx: Fix incorrect width settingJames Bottomley2007-07-272-13/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | Wide transfers are required for every setting of PPR apart from QAS. It seems the DV code starts at the minimum, which turns on DT and Wide regardless of the setting of max_width. Redo the PPR and period setting routines to respect max_width (i.e. start at period = 10 if it is zero). This fixes bugzilla 8366 Acked-by: "Freels, James D." <freelsjd@ornl.gov> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributesSeokmann Ju2007-07-273-24/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a patch to fix 'segmentation fault' issue which was initiated by Richard Lary <rlary@us.ibm.com>. Thanks again Richard. - on following sysfs attritute function, changes have made so that both count and offset input parameters are honored by the functions. = qla2x00_sysfs_read_nvram() = qla2x00_sysfs_read_vpd() - made changes so that NVRAM data to be cached to minimize H/W accesses during agent querying of the driver's. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] aacraid: draw line in sand, sundry cleanup and version updateSalyzyn, Mark2007-07-275-10/+7
| | | | | | | | | | | | | | | | | | | | Minor unimportant cuttings from the floor bundled in with a version stamp update. Only controversial change is the dropping of Alan Cox copyright on the nark.c module since that file has no code written by him in it. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi_tcp: Turn off bounce buffersMike Christie2007-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | It was found by LSI that on setups with large amounts of memory we were bouncing buffers when we did not need to. If the iscsi tcp code touches the data buffer (or a helper does), it will kmap the buffer. iscsi_tcp also does not interact with hardware, so it does not have any hw dma restrictions. This patch sets the bounce buffer settings for our device queue so buffers should not be bounced because of a driver limit. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] libiscsi: fix cmd seqeunce number checkingMike Christie2007-07-271-21/+25
| | | | | | | | | | | | | | | | | | We should not be checking the cmd windown for just handling r2t responses. And if the window closes in on us, always have scsi-ml requeue the command from our queuecommand function. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi_tcp, ib_iser Enable module refcounting for iscsi host templateMike Christie2007-07-271-0/+1
| | | | | | | | | | | | | | | | | | This prevents the iscsi modules from being unloaded while there are active mounts from an iscsi target. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] libiscsi: make sure session is not blocked when removing hostMike Christie2007-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | When we logout we block the session since we are not taking any more commands, but when we call remove host we want to make sure any IO that got queued up and blocked gets failed upwards quickly, so we unblock the session and fail it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] libsas: Remove PCI dependenciesJeff Garzik2007-07-264-21/+18
| | | | | | | | | | | | | | | | Eliminate unnecessary PCI dependencies in libsas. It should use generic DMA and struct device like other subsystems. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] sym53c8xx: don't claim cpqarray deviceChip Coldwell2007-07-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apropos this thread http://marc.theaimsgroup.com/?l=linux-scsi&m=115591706804045&w=2 which led to this patch http://www.kernel.org/git/?p=linux/kernel/git/jejb/scsi-rc-fixes-2.6.git;a=commit;h=b2b3c121076961333977f485f0d54c22121df920 We also need to fix sym53c8xx only to bind to the PCI ID if it is of device class PCI_CLASS_STORAGE_SCSI (otherwise it will be the cpqarray RAID device). Signed-off-by: Chip Coldwell <coldwell@redhat.com> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] libsas: SMP request handler shouldn't crash when rphy is NULLDarrick J. Wong2007-07-241-2/+3
| | | | | | | | | | | | | | | | | | | | sas_smp_handler crashes when smp utils are used with an aic94xx host because certain devices (the sas_host itself, specifically) lack rphy structures. No rphy means no SMP target support, but we shouldn't crash here. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] aacraid: sysfs adapter reset/status format change.Salyzyn, Mark2007-07-231-1/+1
| | | | | | | | | | | | | | | | We need to newline terminate responses from nodes within the sysfs tree, the Adapter status value reported by the reset adapter node is adjusted. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] aacraid: Fix security holeAlan Cox2007-07-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | On the SCSI layer ioctl path there is no implicit permissions check for ioctls (and indeed other drivers implement unprivileged ioctls). aacraid however allows all sorts of very admin only things to be done so should check. Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Data accessors Cleanup of last mergeBoaz Harrosh2007-07-231-2/+2
| | | | | | | | | | | | | | | | - Left overs from last code merges of qla2xxx Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | aacraid: fix security holeAlan Cox2007-07-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | On the SCSI layer ioctl path there is no implicit permissions check for ioctls (and indeed other drivers implement unprivileged ioctls). aacraid however allows all sorts of very admin only things to be done so should check. Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [BLOCK] Get rid of request_queue_t typedefJens Axboe2007-07-243-9/+9
|/ | | | | | | | | Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2007-07-2247-1080/+2921
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits) [SCSI] libsas: make ATA functions selectable by a config option [SCSI] bsg: unexport sg v3 helper functions [SCSI] bsg: fix bsg_unregister_queue [SCSI] bsg: make class backlinks [SCSI] 3w-9xxx: add support for 9690SA [SCSI] bsg: fix bsg_register_queue error path [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275. [SCSI] libsas: fix scr_read/write users and update the libata documentation [SCSI] mpt fusion: update Kconfig help [SCSI] scsi_transport_sas: add destructor for bsg [SCSI] iscsi_tcp: buggered kmalloc() [SCSI] qla2xxx: Update version number to 8.02.00-k2. [SCSI] qla2xxx: Add ISP25XX support. [SCSI] qla2xxx: Use pci_try_set_mwi(). [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces. [SCSI] qla2xxx: Re-factor isp_operations to static structures. [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling. [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration. [SCSI] qla2xxx: Generalize iIDMA support. [SCSI] qla2xxx: Generalize FW-Interface-2 support. ...
| * [SCSI] libsas: make ATA functions selectable by a config optionJames Bottomley2007-07-225-397/+417
| | | | | | | | | | | | | | | | Not everyone wants libsas automatically to pull in libata. This patch makes the behaviour configurable, so you can build libsas with or without ATA support. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] bsg: make class backlinksJames Bottomley2007-07-212-15/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently, bsg doesn't make class backlinks (a process whereby you'd get a link to bsg in the device directory in the same way you get one for sg). This is because the bsg device is uninitialised, so the class device has nothing it can attach to. The fix is to make the bsg device point to the cdevice of the entity creating the bsg, necessitating changing the bsg_register_queue() prototype into a form that takes the generic device. Acked-by: FUJITA Tomonori <tomof@acm.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] 3w-9xxx: add support for 9690SAadam radford2007-07-212-27/+45
| | | | | | | | | | | | | | | | | | | | The attached patch updates the 3ware 9000 driver: - Fix dma mask setting to fallback to 32-bit if 64-bit fails. - Add support for 9690SA controllers. Signed-off-by: Adam Radford <linuxraid@amcc.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275.David Miller2007-07-201-1/+1
| | | | | | | | | | | | | | | | | | | | This matches the original driver's value and seems to be necessary for some disks on sun4c systems. Reported by Mark Fortescue <mark@mtfhpc.demon.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] libsas: fix scr_read/write users and update the libata documentationJames Bottomley2007-07-201-8/+16
| | | | | | | | | | | | | | | | This fixes up the usage in libsas (which are easy to miss, since they're only in the scsi-misc tree) ... and also corrects the documentation on the point of what these two function pointers actually return. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] scsi_transport_sas: add destructor for bsgJames Bottomley2007-07-201-1/+35
| | | | | | | | | | | | | | | | | | | | | | There's currently no destructor for the bsg components. If you insert and remove the module, you see the bsg devices building up and up. This patch adds the destructor in the correct place in the transport class so that the bsg and request queue are removed just before the device destruction. Acked-by: FUJITA Tomonori <tomof@acm.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi_tcp: buggered kmalloc()Al Viro2007-07-201-1/+1
| | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Update version number to 8.02.00-k2.Andrew Vasquez2007-07-201-1/+1
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Add ISP25XX support.Andrew Vasquez2007-07-2011-218/+1137
| | | | | | | | | | | | | | | | Large code-reuse from ISP24xx, consolidate RISC memory extraction routines during firmware-dump. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Use pci_try_set_mwi().Andrew Vasquez2007-07-201-6/+3
| | | | | | | | | | | | | | | | As the "must-check" return-value of pci_set_msi() is never really checked. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces.Andrew Vasquez2007-07-201-21/+4
| | | | | | | | | | | | | | | | Original from Peter Oruba <peter.oruba@amd.com>. Additional cleanups included. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
OpenPOWER on IntegriCloud