summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/scsi_devinfo.c
Commit message (Collapse)AuthorAgeFilesLines
* License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devicesXose Vazquez Perez2016-12-071-2/+0
| | | | | | | | | | | | | | | | | | NetApp did confirm this is not required. Cc: Martin George <Martin.George@netapp.com> Cc: Robert Stankey <Robert.Stankey@netapp.com> Cc: Steven Schremmer <Steven.Schremmer@netapp.com> Cc: Sean Stewart <Sean.Stewart@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christophe Varoqui <christophe.varoqui@opensvc.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Reviewed-by: Sean Stewart <sean.stewart@netapp.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: blacklist all RDAC devices for BLIST_NO_ULD_ATTACHXose Vazquez Perez2016-08-161-0/+4
| | | | | | | | | | | | | | "Universal Xport" LUN is used for in-band storage array management. Cc: Sean Stewart <Sean.Stewart@netapp.com> Cc: Christophe Varoqui <christophe.varoqui@opensvc.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Sean Stewart <Sean.Stewart@netapp.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* SCSI: fix new bug in scsi_dev_info_list string matchingAlan Stern2016-06-291-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | Commit b704f70ce200 ("SCSI: fix bug in scsi_dev_info_list matching") changed the way vendor- and model-string matching was carried out in the routine that looks up entries in a SCSI devinfo list. The new matching code failed to take into account the case of a maximum-length string; in such cases it could end up testing for a terminating '\0' byte beyond the end of the memory allocated to the string. This out-of-bounds bug was detected by UBSAN. I don't know if anybody has actually encountered this bug. The symptom would be that a device entry in the blacklist might not be matched properly if it contained an 8-character vendor name or a 16-character model name. Such entries certainly exist in scsi_static_device_list. This patch fixes the problem by adding a check for a maximum-length string before the '\0' test. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: b704f70ce200 ("SCSI: fix bug in scsi_dev_info_list matching") Tested-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> CC: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: Add QEMU CD-ROM to VPD Inquiry BlacklistEwan D. Milne2016-05-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux fails to boot as a guest with a QEMU CD-ROM: [ 4.439488] ata2.00: ATAPI: QEMU CD-ROM, 0.8.2, max UDMA/100 [ 4.443649] ata2.00: configured for MWDMA2 [ 4.450267] scsi 1:0:0:0: CD-ROM QEMU QEMU CD-ROM 0.8. PQ: 0 ANSI: 5 [ 4.464317] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 4.464319] ata2.00: BMDMA stat 0x5 [ 4.464339] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in [ 4.464339] Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [ 4.464341] ata2.00: status: { DRDY DRQ } [ 4.465864] ata2: soft resetting link [ 4.625971] ata2.00: configured for MWDMA2 [ 4.628290] ata2: EH complete [ 4.646670] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 4.646671] ata2.00: BMDMA stat 0x5 [ 4.646683] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in [ 4.646683] Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [ 4.646685] ata2.00: status: { DRDY DRQ } [ 4.648193] ata2: soft resetting link ... Fix this by suppressing VPD inquiry for this device. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Reported-by: Jan Stancek <jstancek@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Cc: <stable@vger.kernel.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi_dh_alua: Add new blacklist flag 'BLIST_SYNC_ALUA'Hannes Reinecke2016-02-231-0/+2
| | | | | | | | | | | Add a new blacklist flag BLIST_SYNC_ALUA to instruct the alua device handler to use synchronous command submission for ALUA commands. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Merge remote-tracking branch 'mkp-scsi/4.5/scsi-fixes' into fixesJames Bottomley2016-02-111-0/+1
|\
| * SCSI: Add Marvell configuration device to VPD blacklistTodd Fujinaka2016-02-091-0/+1
| | | | | | | | | | | | | | | | | | | | The Marvell 91xx configuration device also needs to be on the VPD blacklist. [mkp: Match all revisions] Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | Merge remote-tracking branch 'mkp-scsi/4.5/scsi-fixes' into fixesJames Bottomley2016-02-041-0/+1
|\ \ | |/
| * SCSI: Add Marvell Console to VPD blacklistMika Westerberg2016-02-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have a Marvell 88SE9230 SATA Controller that has some sort of integrated console SCSI device attached to one of the ports. ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 ata14.00: configured for UDMA/66 scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5 Sending it VPD INQUIRY command seem to always fail with following error: ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) ata14: hard resetting link This has been minor annoyance (only error printed on dmesg) until commit 09e2b0b14690 ("scsi: rescan VPD attributes") added call to scsi_attach_vpd() in scsi_rescan_device(). The commit causes the system to splat out following errors continuously without ever reaching the UI: ata14.00: configured for UDMA/66 ata14: EH complete ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 6 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) ata14: hard resetting link ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: configured for UDMA/66 ata14: EH complete ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 7 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) Without in-depth understanding of SCSI layer and the Marvell controller, I suspect this happens because when the link goes down (because of an error) we schedule scsi_rescan_device() which again fails to read VPD data... ad infinitum. Since VPD data cannot be read from the device anyway we prevent the SCSI layer from even trying by blacklisting the device. This gets away the error and the system starts up normally. [mkp: Widened the match to all revisions of this device] Cc: <stable@vger.kernel.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | scsi: add Synology to 1024 sector blacklistMike Christie2016-01-071-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Another iscsi target that cannot handle large IOs, but does not tell us a limit. The Synology iSCSI targets report: Block limits VPD page (SBC): Write same no zero (WSNZ): 0 Maximum compare and write length: 0 blocks Optimal transfer length granularity: 0 blocks Maximum transfer length: 0 blocks Optimal transfer length: 0 blocks Maximum prefetch length: 0 blocks Maximum unmap LBA count: 0 Maximum unmap block descriptor count: 0 Optimal unmap granularity: 0 Unmap granularity alignment valid: 0 Unmap granularity alignment: 0 Maximum write same length: 0x0 blocks and the size of the command it can handle seems to depend on how much memory it can allocate at the time. This results in IO errors when handling large IOs. This patch just has us use the old 1024 default sectors for this target by adding it to the scsi blacklist. We do not have good contacs with this vendors, so I have not been able to try and fix on their side. I have posted this a long while back, but it was not merged. This version just fixes it up for merge/patch failures in the original version. Reported-by: Ancoron Luciferis <ancoron.luciferis@googlemail.com> Reported-by: Michael Meyers <steltek@tcnnet.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> # 4.1+
* SCSI: fix bug in scsi_dev_info_list matchingAlan Stern2015-10-271-34/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "compatible" matching algorithm used for looking up old-style blacklist entries in a scsi_dev_info_list is buggy. The core of the algorithm looks like this: if (memcmp(devinfo->vendor, vendor, min(max, strlen(devinfo->vendor)))) /* not a match */ where max is the length of the device's vendor string after leading spaces have been removed but trailing spaces have not. Because of the min() computation, either entry could be a proper substring of the other and the code would still think that they match. In the case originally reported, the device's vendor and product strings were "Inateck " and " ". These matched against the following entry in the global device list: {"", "Scanner", "1.80", BLIST_NOLUN} because "" is a substring of "Inateck " and "" (the result of removing leading spaces from the device's product string) is a substring of "Scanner". The mistaken match prevented the system from scanning and finding the device's second Logical Unit. This patch fixes the problem by making two changes. First, the code for leading-space removal is hoisted out of the loop. (This means it will sometimes run unnecessarily, but since a large percentage of all lookups involve the "compatible" entries in global device list, this should be an overall improvement.) Second and more importantly, the patch removes trailing spaces and adds a check to verify that the two resulting strings are exactly the same length. This prevents matches where one entry is a proper substring of the other. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Giulio Bernardi <ugilio@gmail.com> Tested-by: Giulio Bernardi <ugilio@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* SCSI: refactor device-matching code in scsi_devinfo.cAlan Stern2015-10-271-71/+41
| | | | | | | | | | | | In drivers/scsi/scsi_devinfo.c, the scsi_dev_info_list_del_keyed() and scsi_get_device_flags_keyed() routines contain a large amount of duplicate code for finding vendor/product matches in a scsi_dev_info_list. This patch factors out the duplicate code and puts it in a separate function, scsi_dev_info_list_find(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Giulio Bernardi <ugilio@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* SCSI: add 1024 max sectors black list flagMike Christie2015-04-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This works around a issue with qnap iscsi targets not handling large IOs very well. The target returns: VPD INQUIRY: Block limits page (SBC) Maximum compare and write length: 1 blocks Optimal transfer length granularity: 1 blocks Maximum transfer length: 4294967295 blocks Optimal transfer length: 4294967295 blocks Maximum prefetch, xdread, xdwrite transfer length: 0 blocks Maximum unmap LBA count: 8388607 Maximum unmap block descriptor count: 1 Optimal unmap granularity: 16383 Unmap granularity alignment valid: 0 Unmap granularity alignment: 0 Maximum write same length: 0xffffffff blocks Maximum atomic transfer length: 0 Atomic alignment: 0 Atomic transfer length granularity: 0 and it is *sometimes* able to handle at least one IO of size up to 8 MB. We have seen in traces where it will sometimes work, but other times it looks like it fails and it looks like it returns failures if we send multiple large IOs sometimes. Also it looks like it can return 2 different errors. It will sometimes send iscsi reject errors indicating out of resources or it will send invalid cdb illegal requests check conditions. And then when it sends iscsi rejects it does not seem to handle retries when there are command sequence holes, so I could not just add code to try and gracefully handle that error code. The problem is that we do not have a good contact for the company, so we are not able to determine under what conditions it returns which error and why it sometimes works. So, this patch just adds a new black list flag to set targets like this to the old max safe sectors of 1024. The max_hw_sectors changes added in 3.19 caused this regression, so I also ccing stable. Reported-by: Christian Hesse <list@eworm.de> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* scsi: blacklist RSOC for Microsoft iSCSI target devicesMartin K. Petersen2014-12-151-0/+1
| | | | | | | | | | | The Microsoft iSCSI target does not support REPORT SUPPORTED OPERATION CODES. Blacklist these devices so we don't attempt to send the command. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Mike Christie <michaelc@cs.wisc.edu> Reported-by: jazz@deti74.ru Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # v3.10+
* scsi: add Intel Multi-Flex to scsi scan blacklistChristian Sünkenberg2014-11-201-0/+1
| | | | | | | | | | | Intel Multi-Flex LUNs choke on REPORT SUPPORTED OPERATION CODES resulting in sd_mod hanging for several minutes on startup. The issue was introduced with WRITE SAME discovery heuristics. Fixes: 5db44863b6eb ("[SCSI] sd: Implement support for WRITE SAME") Signed-off-by: Christian Sünkenberg <christian.suenkenberg@hfg-karlsruhe.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org
* scsi: do not issue SCSI RSOC command to Promise Vtrak E610fJanusz Dziemidowicz2014-07-291-0/+1
| | | | | | | | | | | | | | | | Some devices don't like REPORT SUPPORTED OPERATION CODES and will simply timeout causing sd_mod init to take a very very long time. Introduce BLIST_NO_RSOC scsi scan flag, that stops RSOC from being issued. Add it to Promise Vtrak E610f entry in scsi scan blacklist. Fixes bug #79901 reported at https://bugzilla.kernel.org/show_bug.cgi?id=79901 Fixes: 98dcc2946adb ("SCSI: sd: Update WRITE SAME heuristics") Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
* [SCSI] Workaround for disks that report bad optimal transfer lengthMartin K. Petersen2013-06-241-0/+1
| | | | | | | | | | | | | Not all disks fill out the VPD pages correctly. Add a blacklist flag that allows us ignore the SBC-3 VPD pages for a given device. The BLIST_SKIP_VPD_PAGES flag triggers our existing skip_vpd_pages scsi_device parameter to bypass VPD scanning. Also blacklist the offending Seagate drive model. Reported-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] Disable DIF on Hitachi Ultrastar 15K300Martin K. Petersen2012-09-241-0/+1
| | | | | | | Hitachi Ultrastar 15K300 is quirky. Disable T10 PI (DIF). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] Blacklist Traxdata CDR4120 and IOMEGA Zip drive to avoid lock ups.Werner Fink2011-06-291-0/+2
| | | | | | | | | | | This patch resulted from the discussion at https://bugzilla.novell.com/show_bug.cgi?id=679277, https://bugzilla.novell.com/show_bug.cgi?id=681840 . Signed-off-by: Werner Fink <werner@novell.com> Signed-off-by: Ankit Jain <jankit@suse.de> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] Add scsi_dev_info_list_del_keyed()Peter Jones2011-01-241-0/+85
| | | | | | | For scsi_dh.c to use devinfo lists, we have to be able to remove entries before rmmod. Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* [SCSI] fix func names in kernel-docRandy Dunlap2009-12-041-2/+2
| | | | | | | | | Fix scsi_devinfo.c kernel-doc function names to match actual function names. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] scsi_devinfo: update Hitachi entries (v2)Takahiro Yasui2009-12-041-5/+4
| | | | | | | | | Four models, OPEN-/DF400/DF500/DISK-SUBSYSTEM, can handle REPORT_LUN, and the BLIST_REPORTLUN2 flag needs to be set. And DF600 doesn't require any flags because it returns ANSI 03h (SPC). Signed-off-by: Takahiro Yasui <tyasui@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* enhance device info matching for multiple tablesJames Bottomley2009-06-211-22/+225
| | | | | | | | | | | The current scsi_devinfo.c matching routines use a single table for the global blacklist. However, we're developing a need to blacklist from specific transports too (notably some tape drives using SPI which don't respond well to high speed protocols). Instead of developing separate blacklist matching for each transport class needing it, enhance the current list matching to permit multiple lists. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] don't attach ULD to Dell Universal XportJames Bottomley2009-06-151-0/+1
| | | | | | | | We already have blacklists for SGI, IBM and SUN versions of this; apparently there's a Dell version too. Reported-by: Thomas Witzel <witzel.thomas@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan2009-03-311-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
* [SCSI] Add SUN Universal Xport to no attach blacklistILLES, Marton2009-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I was using a Sun ST2510 device (iSCSI) and a special "block device" appeared which is used by SUN Common Array Manager in-band management. However it also appeared as a block device and caused some IO error: [ 716.868000] scsi 15:0:0:31: Direct-Access SUN Universal Xport 0735 PQ: 0 ANSI: 5 [ 716.868000] qla4xxx 0000:04:01.1: scsi(15:0:0:31): Enabled tagged queuing, queue depth 32. [ 716.868000] sd 15:0:0:31: [sdf] 40960 512-byte hardware sectors (21 MB) [ 716.868000] sd 15:0:0:31: [sdf] Write Protect is off [ 716.868000] sd 15:0:0:31: [sdf] Mode Sense: 77 00 10 08 [ 716.868000] sd 15:0:0:31: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 716.868000] sd 15:0:0:31: [sdf] 40960 512-byte hardware sectors (21 MB) [ 716.868000] sd 15:0:0:31: [sdf] Write Protect is off [ 716.868000] sd 15:0:0:31: [sdf] Mode Sense: 77 00 10 08 [ 716.872000] sd 15:0:0:31: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 716.872000] sdf: unknown partition table [ 716.932000] sd 15:0:0:31: [sdf] Attached SCSI disk [ 716.932000] sd 15:0:0:31: Attached scsi generic sg6 type 0 [ 717.412000] end_request: I/O error, dev sdf, sector 40 [ 717.412000] Buffer I/O error on device sdf, logical block 5 [ 717.412000] Buffer I/O error on device sdf, logical block 6 [ 717.412000] Buffer I/O error on device sdf, logical block 7 [ 717.412000] Buffer I/O error on device sdf, logical block 8 [ 717.412000] Buffer I/O error on device sdf, logical block 9 [ 717.412000] Buffer I/O error on device sdf, logical block 10 [ 717.412000] Buffer I/O error on device sdf, logical block 11 [ 717.412000] Buffer I/O error on device sdf, logical block 12 [ 717.412000] Buffer I/O error on device sdf, logical block 13 [ 717.412000] Buffer I/O error on device sdf, logical block 14 After some googling it appeared that similar issue has been solved for SGI/IBM devices in 4869040512082b761de2d7c35975d01044f8bfea, so here is the patch for SUN, please apply. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] replace __FUNCTION__ with __func__Harvey Harrison2008-07-271-3/+3
| | | | | | | | | | | | [jejb: fixed up a ton of missed conversions. All of you are on notice this has happened, driver trees will now need to be rebased] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: SCSI List <linux-scsi@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* proc: switch /proc/scsi/device_info to seq_file interfaceAlexey Dobriyan2008-04-291-33/+44
| | | | | | | | | | | | | | | Note 1: 0644 should be used, but root bypasses permissions, so writing to /proc/scsi/device_info still works. Note 2: looks like scsi_dev_info_list is unprotected Note 3: probably make proc whine about "unwriteable but with ->write hook" entries. Probably. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] kernel-doc: use correct function nameRandy Dunlap2008-01-111-1/+1
| | | | | | | Use correct function name in kernel-doc. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] Add Documentation and integrate into docbook buildRob Landley2008-01-111-19/+15
| | | | | | | | | | | Add Documentation/DocBook/scsi_midlayer.tmpl, add to Makefile, and update lots of kerneldoc comments in drivers/scsi/*. Updated with comments from Stefan Richter, Stephen M. Cameron, James Bottomley and Randy Dunlap. Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] Add QUANTUM XP34301 to the blacklistMatthew Wilcox2007-10-121-0/+1
| | | | | | | | According to the AdvanSys driver, this device has a problem with tagged queueing. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] add easyRAID to the no report luns blacklistakpm@linux-foundation.org2007-07-281-0/+3
| | | | | | | | | | According to http://bugzilla.kernel.org/show_bug.cgi?id=5953, the easyRAID returns rubbish to REPORT LUNS. Cc: Natalie Protasevich <protasnb@gmail.com> Cc: Hans-Christian Armingeon <mog.johnny@gmx.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] Add Brownie 1200U3P to blacklistMatthew Wilcox2007-07-141-0/+1
| | | | | | | | The Brownie 1200U3P has the same problem with REPORT LUNS as the 1600U3P. Add it to the blacklist. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] stex: fix id mapping issueEd Lin2007-05-161-0/+1
| | | | | | | | | | | | | | | | | | | | | The correct internal mapping of stex controllers should be: id:0~15, lun:0~7 (st_shasta) id:0, lun:0~127 (st_yosemite) id:0~127, lun:0 (st_vsc and st_vsc1) This patch reports the internal mapping to scsi mid layer, eliminating the translation between scsi mid layer and firmware. To achieve this goal, we also need to: -- fail the REPORT_LUNS command for st_shasta because the firmware is known to not report all actual luns -- add an entry in scsi_devindo.c to force sequential lun scan (for st_shasta controllers) -- fail the REPORT_LUNS command for console device -- remove special handling of REPORT_LUNS command for st_yosemite, as there is no translation mapping now Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] scsi_devinfo: scsi2 HP and Hitachi entriesMike Christie2006-10-011-0/+13
| | | | | | | When SCSI-2 they can support luns past 7 and sparse luns. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] scsi_devinfo: add nec iStorageMike Christie2006-10-011-0/+1
| | | | | | | support the report luns opcode . Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] scsi_devinfo: add TornadoMike Christie2006-10-011-0/+1
| | | | | | | | | | | | | This is from RHEL4. I do not have any info from our bugzilla. All I could find was something like this thread http://lkml.org/lkml/2005/1/7/346 Report lun for linux does not work. It may be our lun format code or it may be the device. It is probably not worth it to add anything special for this device, so the patch just adds BLIST_NOREPORTLUN. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] scsi_devinfo: add EMC InvistaMike Christie2006-10-011-0/+1
| | | | | | | | This is from RHEL4. This box can support scsi2 and can also support BLIST_SPARSELUN | BLIST_LARGELUN. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] HP XP devinfo updateHannes Reinecke2006-06-261-1/+1
| | | | | | | | | | According to Anthony Cheung all HP XP arrays with "OPEN-" types support REPORT_LUN. So there is no reason why we shouldn't use it. Signed-off-by: Anthony Cheung <anthony.cheung@hp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* Merge ../linux-2.6James Bottomley2006-06-101-0/+3
|\
| * [SCSI] Blacklist entry for HP dat changerThomas Bogendoerfer2006-05-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | after upgrading our SUN E250 from 2.4 to 2.6 I'm seeing following error when the HP DDS4 DAT changer gets probed: scsi: host 1 channel 0 id 5 lun16777216 has a LUN larger than allowed by the host adapter The device is connected to a symbios 875 host. I've talked to Willy about the problem, and he asked me to try to blacklist the device for reportlun. I did that with the patch below and it solved the problem. It now gets properly detected: target1:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16) Vendor: HP Model: C5713A Rev: H307 Type: Sequential-Access ANSI SCSI revision: 03 target1:0:5: Beginning Domain Validation target1:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target1:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16) target1:0:5: Domain Validation skipping write tests target1:0:5: Ending Domain Validation Vendor: HP Model: C5713A Rev: H307 Type: Medium Changer ANSI SCSI revision: 03 Signed-off-by: tsbogend@alpha.franken.de Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] scsi: Add IBM 2104-DU3 to blistBrian King2006-04-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | Some versions of the IBM 2104-DU3 disk enclosure have been observed to hang Inquiries to non zero LUNs to the SES device. This device only has LUN 0, so this patch adds it to the BLIST to prevent scsi core from scanning beyond LUN 0. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | Merge ../scsi-rc-fixes-2.6James Bottomley2006-04-141-1/+3
|\ \ | |/ | | | | | | | | | | | | | | | | Conflicts: include/scsi/scsi_devinfo.h Same number for two BLIST flags: BLIST_MAX_512 and BLIST_ATTACH_PQ3 Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] add SCSI_UNKNOWN and LUN transfer limit restrictionsJames Bottomley2006-04-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Original From: Ingo Flaschberger <if@xip.at> To support the RA4100 array from Compaq. This patch now correctly handles SCSI_UNKNOWN types with regard to BLIST_REPORTLUNS2 (allow it) and cdb[1] LUN inclusion (don't). It also allows a BLIST_MAX_512 flag to restrict the maximum transfer length to 512 blocks (apparently this is an RA4100 problem). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | [SCSI] BLIST_ATTACH_PQ3 flagsKurt Garloff2006-04-141-0/+2
|/ | | | | | | | | | | | | | | | | | | | | Some devices report a peripheral qualifier of 3 for LUN 0; with the original code, we would still try a REPORT_LUNS scan (if SCSI level is >= 3 or if we have the BLIST_REPORTLUNS2 passed in), but NOT any sequential scan. Also, the device at LUN 0 (which is not connected according to the PQ) is not registered with the OS. Unfortunately, SANs exist that are SCSI-2 and do NOT support REPORT_LUNS, but report a unknown device with PQ 3 on LUN 0. We still need to scan them, and most probably we even need BLIST_SPARSELUN (and BLIST_LARGELUN). See the bug reference for an infamous example. This is patch 3/3: 3. Implement the blacklist flag BLIST_ATTACH_PQ3 that makes the scsi scanning code register PQ3 devices and continues scanning; only sg will attach thanks to scsi_bus_match(). Signed-off-by: Kurt Garloff <garloff@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] Add Brownie to blacklistMatthew Wilcox2006-03-021-0/+1
| | | | | | | | This device spews total rubbish to a REPORT LUNS command, so avoid sending it one. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] correct some dropped const compiler warningsJames Bottomley2005-12-131-2/+3
| | | | | | | Make the vendor, model and rev fields in scsi_device pointers to const and update a few prototypes of functions using them. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] 2.6.13.3; add Pioneer DRM-624x to drivers/scsi/scsi_devinfo.cKarl Magnus Kolstoe2005-10-171-0/+1
| | | | | | | | The patch below should make the Pioneer DRM-624X automatically be set up with all 6 "drives". (6 slot SCSI CD changer) Signed-off-by: Karl Magnus Kolstø <karl.kolsto@uib.no> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
OpenPOWER on IntegriCloud