summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/hpsa_cmd.h
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] hpsa: use new doorbell-bit-5 reset methodStephen M. Cameron2011-05-171-0/+2
| | | | | | | | | | | | The bit-2-doorbell reset method seemed to cause (survivable) NMIs on some systems and (unsurvivable) IOCK NMIs on some G7 servers. Firmware guys implemented a new doorbell method to alleviate these problems triggered by bit 5 of the doorbell register. We want to use it if it's available. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: do a better job of detecting controller reset failureStephen M. Cameron2011-05-171-0/+1
| | | | | | | | | | | | | Detect failure of controller reset by noticing if the 32 bytes of "driver version" we store on the hardware in the config table fail to get zeroed out. Previously we noticed if the controller did not transition to "simple mode", but this did not detect reset failure if the controller was already in simple mode prior to the reset attempt (e.g. due to module parameter hpsa_simple_mode=1). Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: delete old unused padding garbageStephen M. Cameron2011-05-171-8/+0
| | | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: Inform controller we are using 32-bit tags.Stephen M. Cameron2011-02-181-0/+1
| | | | | | | | | | Controller will transfer only 32-bits on completion if it knows we are only using 32-bit tags. Also, some newer controllers apparently (and erroneously) require that we only use 32-bit tags, and that we inform the controller of this. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: do not re-order commands in internal queuesStephen M. Cameron2011-02-181-1/+1
| | | | | | | | Driver's internal queues should be FIFO, not LIFO. This is a port of an almost identical patch from cciss by Jens Axboe. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: fixup DMA address before freeing.Stephen M. Cameron2011-01-241-0/+1
| | | | | | | | | | | | | | | Some low bits might have been set by the driver, causing a message like this to come out: [ 13.288062] ------------[ cut here ]------------ [ 13.293211] WARNING: at lib/dma-debug.c:803 check_unmap+0x1a1/0x654() [ 13.300387] Hardware name: ProLiant DL180 G6 [ 13.305335] hpsa 0000:06:00.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000007f81e001] [size=640 bytes] Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: Fix hard reset code.Stephen M. Cameron2010-07-271-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Smart Array controllers newer than the P600 do not honor the PCI power state method of resetting the controllers. Instead, in these cases we can get them to reset via the "doorbell" register. This escaped notice until we began using "performant" mode because the fact that the controllers did not reset did not normally impede subsequent operation, and so things generally appeared to "work". Once the performant mode code was added, if the controller does not reset, it remains in performant mode. The code immediately after the reset presumes the controller is in "simple" mode (which previously, it had remained in simple mode the whole time). If the controller remains in performant mode any code which presumes it is in simple mode will not work. So the reset needs to be fixed. Unfortunately there are some controllers which cannot be reset by either method. (eg. p800). We detect these cases by noticing that the controller seems to remain in performant mode even after a reset has been attempted. In those case, we proceed anyway, as if the reset has happened (and skip the step of waiting for the controller to become ready -- which is expecting it to be in "simple" mode.) To sum up, we try to do a better job of resetting the controller if "reset_devices" is set, and if it doesn't work, we print a message and try to continue anyway. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: remove unneeded definesMike Miller2010-05-021-15/+0
| | | | | | | | This patch removes unnecessary #define's from hpsa. The SCSI midlayer handles all this for us. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: remove unused members next, prev, and retry_count from command ↵Stephen M. Cameron2010-03-031-5/+2
| | | | | | | list structure. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: Increase the number of scatter gather elements supported.Stephen M. Cameron2010-03-031-3/+4
| | | | | | | | | | | | | | This uses the scatter-gather chaining feature of Smart Array controllers. 32 scatter-gather elements are embedded in the "command list", and the last element in the list may be marked as a "chain pointer", and point to an additional block of scatter gather elements. The precise number of scatter gather elements supported is dependent on the particular kind of Smart Array, and is determined at runtime by querying the hardware. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: Clarify calculation of padding for commandlist structureStephen M. Cameron2010-03-031-4/+10
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: Allow multiple command completions per interrupt.Don Brace2010-02-171-15/+63
| | | | | | | | | | | | | This is done by adding support for the so-called "performant mode" (that's really what they called it). Smart Array controllers have a mode which enables multiple command completions to be delivered with a single interrupt, "performant" mode. We want to use that mode, as some newer controllers will be requiring this mode. Signed-off-by: Don Brace <brace@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: Use kernel integer types, not userland onesStephen M. Cameron2010-02-171-73/+73
| | | | | | | That is, use u64, u32, u16 and u8 rather than __u64, __u32, __u16 and __u8. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: fix typo in commentsStephen M. Cameron2010-02-171-1/+1
| | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] hpsa: add driver for HP Smart Array controllers.Stephen M. Cameron2009-12-101-0/+326
This driver supports a subset of HP Smart Array Controllers. It is a SCSI alternative to the cciss driver. [akpm@linux-foundation.org: avoid helpful cleanup patches] [achiang@hp.com: make device attrs static] [akpm@linux-foundation.org: msleep() does set_current_state() itself] Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
OpenPOWER on IntegriCloud