summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/fnic/fnic.h
Commit message (Collapse)AuthorAgeFilesLines
* fnic: Use the local variable instead of I/O flag to acquire io_req_lock in ↵Hiral Shah2015-08-181-1/+1
| | | | | | | | | | | | | | | | | | | fnic_queuecommand() to avoid deadloack We added changes in fnic driver patch 1.6.0.16 to acquire io_req_lock in fnic_queuecommand() before issuing I/O so that io completion is serialized. But when releasing the lock we check for the I/O flag and this could be modified if IO abort occurs before I/O completion. In this case we wont release the lock and causes deadlock in some scenerios. Using the local variable to check the IO lock status will resolve the problem. Fixes: 41df7b02db82cf6c14f094757bac3830d10a827f Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Odin.com>
* fnic: IOMMU Fault occurs when IO and abort IO is out of orderAnil Chintalapati (achintal)2014-12-301-1/+1
| | | | | | | | | | | | When I/O is aborted by mid-layer, fnic FW will complete the I/O before completing the abort task. In some cases abort request is completed before the I/O, which could lead to inconsistent driver and firmware states. In this case firmware reset would clear the inconsistent state. Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* Fnic: Fnic Driver crashed with NULL pointer referenceHiral Shah2014-11-201-1/+1
| | | | | | | | | | | | | | When issuing I/O request, if the I/O completes before returning from fnic_queuecommand(), we may be referencing scsi_cmnd structure that may be freed by interrupt handler. Acquring IO lock would synchronize fnic_queuecommand and interrupt handler. - Increment fnic version from 1.6.0.15 to 1.6.0.16 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* Fnic: For Standalone C series, "sending VLAN request" message seen even if ↵Hiral Shah2014-11-201-1/+1
| | | | | | | | | | | | | | | | | | the link is down When physical link between standalone C series and switch is down, the fip timer is not turned off and timer expiration will keep sending vlan request. It can be fixed by stopping the fip_timer and it will be restarted automatically when Link is up. - Increment fnic version from 1.6.0.14 to 1.6.0.15 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* Fnic: Improper resue of exchange IdsHiral Shah2014-11-201-1/+1
| | | | | | | | | | | | | | | | | | | IOs belonging to an rport are aborted with Internal terminate option when rport goes offline. Any new IO issued to the rport during this time can reuse the terminated exchange which will cause inconsistent state of the exchange between local port and remote port. fc_rport_priv is set to RPORT_ST_DELETE before exchanges are aborted by libfc. Not issuing amy more I/O requests when RPORT_ST_DELETE is set, will avoid inconsistent state of the exchange between local port and remote port. - Increment fnic version from 1.6.0.13 to 1.6.0.14 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* Fnic: Memcopy only mimumum of data or trace bufferHiral Shah2014-11-201-1/+1
| | | | | | | | | | | | | | In case of receive path, we do not have eth header or fcoe header available when we take a trace so we fill the fc trace buffer with 0xff for both values. We copy only mimimum of received data or trace buffer size - fc header - eth and fcoe header - Increment fnic version from 1.6.0.12 to 1.6.0.13 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* Fnic: Not probing all the vNICS via fnic_probe on bootHiral Shah2014-11-201-1/+1
| | | | | | | | | | | | | In fnic_dev_wait, Wait for finish to complete at least three times in two seconds while loop before returning -ETIMEDOUT as sometime schedule_timeout_uninterruptible takes more than two seconds to wake up. - Increment fnic version from 1.6.0.11 to 1.6.0.12 Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* fnic: assign FIP_ALL_FCF_MACS to fcoe_all_fcfsHiral Shah2014-09-161-1/+1
| | | | | | | | | | | | | | | 1) Assgning FIP_ALL_FCF_MACS to fcoe_all_fcfs allows VLAN request to be sent to correct Mac address for VLAN Discovery otherwise VLAN request will be sent to invalid address hence FLOGI never happens. 2) Simplify the copy_and_format_trace_data code and log the correct Link event for fnic control path tracing in case of link status UP->UP. 3) Increment Fnic driver version Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* fnic: fnic Control Path Trace UtilityHiral Shah2014-05-191-1/+1
| | | | | | | | | | | | | | | | | | Fnic Ctlr Path Trace utility is a tracing functionality built directly into fnic driver to trace the control path frames like discovery, FLOGI request/reply, PLOGI request/reply, link event etc. It will be one trace file for all fnics. It will help us to debug and resolve the discovery and initialization related issues in more convenient way. This trace information includes time stamp, Host Number, Frame type, Frame Length and Frame. By default,64 pages are allocated but we can change the number of allocated pages by module parameter fnic_fc_trace_max_page. Each entry is of 256 byte and available entries are depends on allocated number of pages. We can turn on or off the fnic control path trace functionality by module paramter fc_trace_enable and/or reset the trace contain by module paramter fc_trace_clear. Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* fnic: NoFIP solicitation frame in NONFIP mode and changed IO Throttle countHiral Shah2014-05-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | This patch contains following three minor fixes. 1) During Probe, fnic was sending FIP solicitation in Non FIP mode which is not expected, setting the internal fip state to Non FIP mode explicitly, avoids sending FIP frame. 2) When target goes offline, all outstanding IOs belong to the target will be terminated by driver, If the termination count is high, then it influences firmware responsiveness. To improve the responsiveness, default IO throttle count is reduced to 256. 3) Accessing Virtual Fabric Id (vfid) and fc_map of Fibre-Channel Forwarder(FCF) is invalid in fnic driver when Clear Virtual Link(CVL) is received prior to receiving flogi reject from switch. As CVL clears all FCFs. Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Anantha Tungarakodi <atungara@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* [SCSI] fnic: Incremented driver versionHiral Patel2013-10-251-1/+1
| | | | | Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fnic: Fnic Statistics CollectionHiral Patel2013-10-251-0/+8
| | | | | | | | | | | | This feature gathers active and cumulative per fnic stats for io, abort, terminate, reset, vlan discovery path and it also includes various important stats for debugging issues. It also provided debugfs and ioctl interface for user to retrieve these stats. It also provides functionality to reset cumulative stats through user interface. Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fnic: fnic Driver Tuneables Exposed through CLIHiral Patel2013-09-111-0/+3
| | | | | | | | | | | | | | | | | | | | Introduced module params to provide dynamic way of configuring queue depth. Added support to get max io throttle count through UCSM to configure maximum outstanding IOs supported by fnic and push that value to scsi mid-layer. Supported IO throttle values: UCSM IO THROTTLE VALUE FNIC MAX OUTSTANDING IOS ------------------------------------------------------ 16 (Default) 2048 <= 256 256 > 256 <ucsm value> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fnic: FC stat param seconds_since_last_reset not getting updatedNarsimhulu Musini2013-09-111-0/+5
| | | | | | | | | | Code to reset fc_host statistics. echo 1 > /sys/class/fc_host/hostX/statistics/reset_statistics clears fc_host stats, the code also issues command to fnic firmware to clear vnic stats. Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fnic: BUG: sleeping function called from invalid context during probeChris Leech2013-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I hit this during driver probe with the latest fnic updates (this trace is from a backport into a distro kernel, but the issue is the same). > BUG: sleeping function called from invalid context at mm/slab.c:3113 > in_atomic(): 0, irqs_disabled(): 1, pid: 610, name: work_for_cpu > INFO: lockdep is turned off. > irq event stamp: 0 > hardirqs last enabled at (0): [<(null)>] (null) > hardirqs last disabled at (0): [<ffffffff81070aa5>] > copy_process+0x5e5/0x1670 > softirqs last enabled at (0): [<ffffffff81070aa5>] > copy_process+0x5e5/0x1670 > softirqs last disabled at (0): [<(null)>] (null) > Pid: 610, comm: work_for_cpu Not tainted > Call Trace: > [<ffffffff810b2d10>] ? print_irqtrace_events+0xd0/0xe0 > [<ffffffff8105c1a7>] ? __might_sleep+0xf7/0x130 > [<ffffffff81184efb>] ? kmem_cache_alloc_trace+0x20b/0x2d0 > [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0 > [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0 > [<ffffffffa00c101c>] ? fnic_probe+0x977/0x11aa [fnic] > [<ffffffffa00c1048>] ? fnic_probe+0x9a3/0x11aa [fnic] > [<ffffffff81096f00>] ? do_work_for_cpu+0x0/0x30 > [<ffffffff812c6da7>] ? local_pci_probe+0x17/0x20 > [<ffffffff81096f18>] ? do_work_for_cpu+0x18/0x30 > [<ffffffff8109cdc6>] ? kthread+0x96/0xa0 > [<ffffffff8100c1ca>] ? child_rip+0xa/0x20 > [<ffffffff81550f80>] ? _spin_unlock_irq+0x30/0x40 > [<ffffffff8100bb10>] ? restore_args+0x0/0x30 > [<ffffffff8109cd30>] ? kthread+0x0/0xa0 > [<ffffffff8100c1c0>] ? child_rip+0x0/0x20 The problem is in this hunk of "FIP VLAN Discovery Feature Support" (d3c995f1dcf938f1084388d92b8fb97bec366566) create_singlethreaded_workqueue cannot be called with irqs disabled @@ -620,7 +634,29 @@ static int __devinit fnic_probe(struct pci_dev *pdev, vnic_dev_packet_filter(fnic->vdev, 1, 1, 0, 0, 0); vnic_dev_add_addr(fnic->vdev, FIP_ALL_ENODE_MACS); vnic_dev_add_addr(fnic->vdev, fnic->ctlr.ctl_src_addr); + fnic->set_vlan = fnic_set_vlan; fcoe_ctlr_init(&fnic->ctlr, FIP_MODE_AUTO); + setup_timer(&fnic->fip_timer, fnic_fip_notify_timer, + (unsigned long)fnic); + spin_lock_init(&fnic->vlans_lock); + INIT_WORK(&fnic->fip_frame_work, fnic_handle_fip_frame); + INIT_WORK(&fnic->event_work, fnic_handle_event); + skb_queue_head_init(&fnic->fip_frame_queue); + spin_lock_irqsave(&fnic_list_lock, flags); + if (!fnic_fip_queue) { + fnic_fip_queue = + create_singlethread_workqueue("fnic_fip_q"); + if (!fnic_fip_queue) { + spin_unlock_irqrestore(&fnic_list_lock, flags); + printk(KERN_ERR PFX "fnic FIP work queue " + "create failed\n"); + err = -ENOMEM; + goto err_out_free_max_pool; + } + } + spin_unlock_irqrestore(&fnic_list_lock, flags); + INIT_LIST_HEAD(&fnic->evlist); + INIT_LIST_HEAD(&fnic->vlans); } else { shost_printk(KERN_INFO, fnic->lport->host, "firmware uses non-FIP mode\n"); The attempts to make fnic_fip_queue a single instance for the driver while it's being created in probe look awkward anyway, why is this not created in fnic_init_module like the event workqueue? Signed-off-by: Chris Leech <cleech@redhat.com> Tested-by: Anantha Tungarakodi <atungara@cisco.com> Acked-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fnic: Incremented driver versionHiral Patel2013-05-021-1/+1
| | | | | | Signed-off-by: Brian Uchino <buchino@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fnic: FIP VLAN Discovery Feature SupportHiral Patel2013-05-021-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FIP VLAN discovery discovers the FCoE VLAN that will be used by all other FIP protocols as well as by the FCoE encapsulation for Fibre Channel payloads on the established virtual link. One of the goals of FC-BB-5 was to be as nonintrusive as possible on initiators and targets, and therefore FIP VLAN discovery occurs in the native VLAN used by the initiator or target to exchange Ethernet traffic. The FIP VLAN discovery protocol is the only FIP protocol running on the native VLAN; all other FIP protocols run on the discovered FCoE VLANs. If an administrator has manually configured FCoE VLANs on ENodes and FCFs, there is no need to use this protocol. FIP and FCoE will run over the configured VLANs. An ENode without FCoE VLANs configuration would use this automated discovery protocol to discover over which VLANs FCoE is running. The ENode sends a FIP VLAN discovery request to a multicast MAC address called All-FCF-MACs, which is a multicast MAC address to which all FCFs listen. All FCFs that can be reached in the native VLAN of the ENode are expected to respond on the same VLAN with a response that lists one or more FCoE VLANs that are available for the ENode's VN_Port login. This protocol has the sole purpose of allowing the ENode to discover all the available FCoE VLANs. Now the ENode may enable a subset of these VLANs for FCoE Running the FIP protocol in these VLANs on a per VLAN basis. And FCoE data transactions also would occur on this VLAN. Hence, Except for FIP VLAN discovery, all other FIP and FCoE traffic runs on the selected FCoE VLAN. Its only the FIP VLAN Discovery protocol that is permitted to run on the Default native VLAN of the system. [**** NOTE ****] We are working on moving this feature definitions and functionality to libfcoe module. We need this patch to be approved, as Suse is looking forward to merge this feature in SLES 11 SP3 release. Once this patch is approved, we will submit patch which should move vlan discovery feature to libfoce. [Fengguang Wu <fengguang.wu@intel.com>: kmalloc cast removal] Signed-off-by: Anantha Prakash T <atungara@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fnic: Fnic Trace UtilityHiral Patel2013-02-221-0/+1
| | | | | | | | | | | | | | Fnic Trace utility is a tracing functionality built directly into fnic driver to trace events. The benefit that trace buffer brings to fnic driver is the ability to see what it happening inside the fnic driver. It also provides the capability to trace every IO event inside fnic driver to debug panics, hangs and potentially IO corruption issues. This feature makes it easy to find problems in fnic driver and it also helps in tracking down strange bugs in a more manageable way. Trace buffer is shared across all fnic instances for this implementation. Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fnic: New debug flags and debug log messagesHiral Patel2013-02-221-8/+23
| | | | | | | | | Added new fnic debug flags for identifying IO state at every stage of IO while debugging and also added more log messages for better debugging capability. Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fnic: fnic driver may hit BUG_ON on device resetHiral Patel2013-02-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The issue was observed when LUN Reset is issued through IOCTL or sg_reset utility. fnic driver issues LUN RESET to firmware. On successful completion of device reset, driver cleans up all the pending IOs that were issued prior to device reset. These pending IOs are expected to be in ABTS_PENDING state. This works fine, when the device reset operation resulted from midlayer, but not when device reset was triggered from IOCTL path as the pending IOs were not in ABTS_PENDING state. execution path hits panic if the pending IO is not in ABTS_PENDING state. Changes: The fix replaces BUG_ON check in fnic_clean_pending_aborts() with marking pending IOs as ABTS_PENDING if they were not in ABTS_PENDING state and skips if they were already in ABTS_PENDING state. An extra check is added to validate the abort status of the commands after a delay of 2 * E_D_TOV using a helper function. The helper function returns 1 if it finds any pending IO in ABTS_PENDING state, belong to the LUN on which device reset was issued else 0. With this, device reset operation returns success only if the helper funciton returns 0, otherwise it returns failure. Other changes: - Removed code in fnic_clean_pending_aborts() that returns failure if it finds io_req NULL, instead of returning failure added code to continue with next io - Added device reset flags for debugging in fnic_terminate_rport_io, fnic_rport_exch_reset, and fnic_clean_pending_aborts Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fnic: fixing issues in device and firmware reset codeHiral Patel2013-02-221-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Handling overlapped firmware resets This fix serialize multiple firmware resets to avoid situation where fnic device fails to come up for link up event, when firmware resets are issued back to back. If there are overlapped firmware resets are issued, the firmware reset operation checks whether there is any firmware reset in progress, if so it polls for its completion in a loop with 100ms delay. 2. Handling device reset timeout fnic_device_reset code has been modified to handle Device reset timeout: - Issue terminate on device reset timeout. - Introduced flags field (one of the scratch fields in scsi_cmnd). With this, device reset request would have DEVICE_RESET flag set for other routines to determine the type of the request. Also modified fnic_terminate_rport_io, fnic_rport_exch_rset, completion routines to handle SCSI commands with DEVICE_RESET flag. 3. LUN/Device Reset hangs when issued through IOCTL using utilities like sg_reset. Each SCSI command is associated with a valid tag, fnic uses this tag to retrieve associated scsi command on completion. the LUN/Device Reset issued through IOCTL resulting into a SCSI command that is not associated with a valid tag. So fnic fails to retrieve associated scsi command on completion, which causes hang. This fix allocates tag, associates it with the scsi command and frees the tag, when the operation completed. 4. Preventing IOs during firmware reset. Current fnic implementation allows IO submissions during firmware reset. This fix synchronizes IO submissions and firmware reset operations. It ensures that IOs issued to fnic prior to reset will be issued to the firmware before firmware reset. Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fnic: fix incorrect use of SLAB_CACHE_DMA flagAbhijeet Joglekar2011-06-291-1/+1
| | | | | | | | | | | Driver was incorrectly using the SLAB_CACHE_DMA flag when creating a cache for SGLs. fnic device does not have 24-bit DMA restrictions. Remove the flag and allocations from ZONE_DMA. Thanks to Roland Dreier and David Rientjes for pointing out the bug. Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fnic: Bumping up fnic version from 1.4.0.145 to 1.5.0.1.Venkata Siva Vijayendra Bhamidipati2011-02-121-1/+1
| | | | | | Signed-off-by: Venkata Siva Vijayendra Bhamidipati <vbhamidi@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* SCSI host lock push-downJeff Garzik2010-11-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* scsi: remove private BIT macrosAndrew Morton2010-08-111-1/+1
| | | | | | | | | | | A couple of scsi drivers define a BIT() macro, duplicating the one in bitops.h. Cc: Jing Huang <huangj@brocade.com> Cc: Robert Love <robert.w.love@intel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] fcoe, fnic, libfc: increased CDB size to 16 bytes for fcoe.Vasu Dev2010-04-111-1/+1
| | | | | | | | | | | | | | No reason to restrict CDB size to 12 bytes in fcoe, so increased to 16 so that 16 bytes SCSI CDB doesn't fail. Uses common define to set max_cmd_len for fcoe and fnic, fnic is already setting max_cmd_len to 16. sg_readcap -l fails without this fix. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fnic: Update version to 1.4.0.145Brian Uchino2010-04-111-1/+1
| | | | | | | | | New fnic version to mark inclusion of tx_flush bugfix. Signed-off-by: Brian Uchino <buchino@cisco.com> Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fnic: Set fnic driver versionVenkata Siva Vijayendra Bhamidipati2010-02-171-1/+1
| | | | | | | | Update fnic driver version. Signed-off-by: Venkata Siva Vijayendra Bhamidipati <vbhamidi@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fnic: Add FIP support to the fnic driverJoe Eykholt2009-12-041-9/+14
| | | | | | | | | | | | | | | | | | | | | | | | | Use libfcoe as a common FIP implementation with fcoe. FIP or non-FIP mode is fully automatic if the firmware supports and enables it. Even if FIP is not supported, this uses libfcoe for the non-FIP handling of FLOGI and its response. Use the new lport_set_port_id() notification to capture successful FLOGI responses and port_id resets. While transitioning between Ethernet and FC mode, all rx and tx FC frames are queued. In Ethernet mode, all frames are passed to the exchange manager to capture FLOGI responses. Change to set data_src_addr to the ctl_src_addr whenever it would have previously been zero because we're not logged in. This seems safer so we'll never send a frame with a 0 source MAC. This also eliminates a special case for sending FLOGI frames. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fnic: Set max_cmd_len to driver supported CDB lengthAbhijeet Joglekar2009-12-041-1/+1
| | | | | | Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fnic: Add new Cisco PCI-Express FCoE HBAAbhijeet Joglekar2009-05-131-0/+265
fnic is a driver for the Cisco PCI-Express FCoE HBA Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com> Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
OpenPOWER on IntegriCloud