summaryrefslogtreecommitdiffstats
path: root/drivers/s390
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] zfcp: Prevent usage w/o holding a referenceSwen Schillig2010-12-091-3/+6
| | | | | | | | | | | The ERP got values assigned for which no reference was taken. This can lead to an unpredictable race condition. Fix this by only assigning the values which are required and for which a reference was pulled or is held implicitly. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] zfcp: No ERP escalation on gpn_ft evalSwen Schillig2010-12-091-0/+2
| | | | | | | | | | | | | If the evaluation of GPN_FT requests wants to remove an invalid port from the system the zfcp_erp_port_shutdown function is triggered. Depending on the system status a superior action (e.g. adapter reopen) is required. This can lead to an invalid mem access of the port struct which might be freed at the time since the superior action is not holding a reference of the port which triggered this ERP action. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] zfcp: Correct false abort data assignment.Swen Schillig2010-12-091-1/+1
| | | | | | | | | | | The request data assignment between the fsf abort initiator and its corresponding handler is not consistent and leads to an unpredictable behaviour, e.g. kernel panic. This patch fixes this issue and assigns the correct value. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] zfcp: Fix common FCP request receptionSwen Schillig2010-12-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reception of a common FCP request should only be evaluated if the corresponding SCSI request data is available. Therefore put the information under the lock protection and verify the existence before processing. This fixes the following kernel panic. Unable to handle kernel pointer dereference at virtual kernel address 0000000180000000 Oops: 003b [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU: 0 Not tainted 2.6.35.7-45.x.20101007-s390xdefault #1 Process blast (pid: 9711, task: 00000000a3be8e40, ksp: 00000000b221bac0) Krnl PSW : 0704300180000000 0000000000489878 (zfcp_fsf_fcp_handler_common+0x4c/0x3a0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:3 PM:0 EA:3 Krnl GPRS: 00000000b663c1b8 0000000180000000 000000007ab5bdf0 0000000000000000 00000000b0ccd800 0000000000000018 07000000a3be8e78 00000000b5d3e600 000000007ab5bdf0 0000000000000066 00000000b72137f0 00000000b72137f0 0000000000000000 00000000005a8178 00000000bdf37a60 00000000bdf379f0 Krnl Code: 0000000000489866: e3c030000004 lg %r12,0(%r3) 000000000048986c: e310c0000004 lg %r1,0(%r12) 0000000000489872: e31011e00004 lg %r1,480(%r1) >0000000000489878: 581011ec l %r1,492(%r1) 000000000048987c: a774001c brc 7,4898b4 0000000000489880: b91400b1 lgfr %r11,%r1 0000000000489884: 5810405c l %r1,92(%r4) 0000000000489888: 5510d00c cl %r1,12(%r13) Call Trace: ([<000000000010d344>] debug_event_common+0x22c/0x244) [<000000000048a0b4>] zfcp_fsf_fcp_cmnd_handler+0x2c/0x3b4 [<000000000048b5b6>] zfcp_fsf_req_complete+0x1b6/0x9dc [<000000000048bede>] zfcp_fsf_reqid_check+0x102/0x138 [<000000000048e478>] zfcp_qdio_int_resp+0x70/0x110 [<000000000044a1ec>] qdio_kick_handler+0xb0/0x19c [<000000000044c228>] __tiqdio_inbound_processing+0x30c/0xebc [<000000000014a5fc>] tasklet_action+0x1b4/0x1e8 [<000000000014b676>] __do_softirq+0x106/0x1cc [<000000000010d91a>] do_softirq+0xe6/0xec [<000000000014b0c8>] irq_exit+0xd4/0xd8 [<00000000004307ec>] do_IRQ+0x7c0/0xf54 [<0000000000114d28>] io_return+0x0/0x16 [<000000000055fef0>] sub_preempt_count+0x50/0xe4 ([<00000000b1f873c0>] 0xb1f873c0) [<000000000055e25a>] _raw_spin_unlock+0x46/0x74 [<0000000000241c40>] __d_lookup+0x288/0x2c8 [<000000000023502c>] do_lookup+0x7c/0x25c [<0000000000237fa8>] link_path_walk+0x5e4/0xe2c [<0000000000238a00>] path_walk+0x98/0x148 [<0000000000238c98>] do_path_lookup+0x74/0xc0 [<000000000023989c>] user_path_at+0x64/0xa4 [<000000000022e366>] vfs_fstatat+0x4e/0xb0 [<000000000022e4d6>] SyS_newstat+0x2e/0x54 [<00000000001146de>] sysc_noemu+0x10/0x16 [<0000020000153456>] 0x20000153456 INFO: lockdep is turned off. Last Breaking-Event-Address: [<000000000048a0ae>] zfcp_fsf_fcp_cmnd_handler+0x26/0x3b4 Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [S390] css: fix rsid evaluation for 2nd crwSebastian Ott2010-12-011-1/+1
| | | | | | | Use correct bit positions of rsid field. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: free indicator after reset is finishedJan Glauber2010-11-251-1/+1
| | | | | | | | | | | The qdio device indicator is freed before the device is notified that the indicator is reset. This sequence contains a race when the freed indicator is used by a new device while the reset of the indicator is still pending. Do the reset operation before freeing the indicator to avoid that potential race. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann2010-11-176-6/+0
| | | | | | | | | | The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* SCSI host lock push-downJeff Garzik2010-11-161-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2010-11-163-22/+93
|\ | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] kprobes: Fix the return address of multiple kretprobes [S390] kprobes: disable interrupts throughout [S390] ftrace: build without frame pointers on s390 [S390] mm: add devmem_is_allowed() for STRICT_DEVMEM checking [S390] vmlogrdr: purge after recording is switched off [S390] cio: fix incorrect ccw_device_init_count [S390] tape: add medium state notifications [S390] fix get_user_pages_fast
| * [S390] vmlogrdr: purge after recording is switched offStefan Weinhuber2010-11-101-12/+24
| | | | | | | | | | | | | | | | | | | | | | | | If automatic purge is enabled for a vmlogrdr device, old records are purged before an IUCV recording service is switched on or off. If z/VM generates a large number of records between purging and switching the recording service off, these records remain queued, and may have a negative performance impact on the z/VM system. To avoid this problem, we need to purge the records after recording is switched off. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] cio: fix incorrect ccw_device_init_countSebastian Ott2010-11-101-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | If device recognition is interrupted by a subchannel event indicating that the device is gone, ccw_device_init_count is not correctly decreased. Fix this by reporting the corresponding event to the device recognition callback via the state machine. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] tape: add medium state notificationsMartin Schwidefsky2010-11-101-9/+59
| | | | | | | | | | | | | | Add uevent notifications for tape cartridge load and tape cartridge unload events. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2010-11-122-55/+9
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits) can-bcm: fix minor heap overflow gianfar: Do not call device_set_wakeup_enable() under a spinlock ipv6: Warn users if maximum number of routes is reached. docs: Add neigh/gc_thresh3 and route/max_size documentation. axnet_cs: fix resume problem for some Ax88790 chip ipv6: addrconf: don't remove address state on ifdown if the address is being kept tcp: Don't change unlocked socket state in tcp_v4_err(). x25: Prevent crashing when parsing bad X.25 facilities cxgb4vf: add call to Firmware to reset VF State. cxgb4vf: Fail open if link_start() fails. cxgb4vf: flesh out PCI Device ID Table ... cxgb4vf: fix some errors in Gather List to skb conversion cxgb4vf: fix bug in Generic Receive Offload cxgb4vf: don't implement trivial (and incorrect) ndo_select_queue() ixgbe: Look inside vlan when determining offload protocol. bnx2x: Look inside vlan when determining checksum proto. vlan: Add function to retrieve EtherType from vlan packets. virtio-net: init link state correctly ucc_geth: Fix deadlock ucc_geth: Do not bring the whole IF down when TX failure. ...
| * qeth: fix race condition during device startupFrank Blaschka2010-11-081-1/+1
| | | | | | | | | | | | | | | | QDIO is running independent from netdevice state. We are not allowed to schedule NAPI in case the netdevice is not open. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qeth: remove dev_queue_xmit invocationUrsula Braun2010-11-082-54/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | For a certain Hipersockets specific error code in the xmit path, the qeth driver tries to invoke dev_queue_xmit again. Commit 79640a4ca6955e3ebdb7038508fa7a0cd7fa5527 introduces a busylock causing locking problems in case of re-invoked dev_queue_xmit by qeth. This patch removes the attempts to retry packet sending with dev_queue_xmit from the qeth driver. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2010-10-313-6/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (70 commits) [SCSI] pmcraid: add support for set timestamp command and other fixes [SCSI] pmcraid: remove duplicate struct member [SCSI] qla4xxx: Fix cmd check in qla4xxx_cmd_wait [SCSI] megaraid_sas: Version and documentation update [SCSI] megaraid_sas: Add three times Online controller reset [SCSI] megaraid_sas: Add input parameter for max_sectors [SCSI] megaraid_sas: support devices update flag [SCSI] libosd: write/read_sg_kern API [SCSI] libosd: Support for scatter gather write/read commands [SCSI] libosd: Free resources in reverse order of allocation [SCSI] libosd: Fix bug in attr_page handling [SCSI] lpfc 8.3.18: Update lpfc driver version to 8.3.18 [SCSI] lpfc 8.3.18: Add new WQE support [SCSI] lpfc 8.3.18: Fix critical errors [SCSI] lpfc 8.3.18: Adapter Shutdown and Unregistration cleanup [SCSI] lpfc 8.3.18: Add logic to detect last devloss timeout [SCSI] lpfc 8.3.18: Add support of received ELS commands [SCSI] lpfc 8.3.18: FC/FCoE Discovery fixes [SCSI] ipr: add definitions for a new adapter [SCSI] bfa: fix comments for c files ...
| * | [SCSI] zfcp: Use correct length for FCP_RSP_INFOChristof Schmitt2010-10-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use the FCP_RSP_INFO length to correctly skip the FCP_RSP_INFO field. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | [SCSI] zfcp: Call get_device on port before calling put_deviceChristof Schmitt2010-10-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | zfcp_unit_release calls put_device on the port. Ensure that get_device has been called before possibly triggering the release function through put_device or device_unregister. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | [SCSI] zfcp: Fix adapter activation on link downSwen Schillig2010-10-251-3/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | If an exchange config is executed while the local link is down, the request succeeds but the returned data is incomplete. Proceeding with the adapter activation is leading to an unpredictable behaviour (e.g. kernel panic) caused by invalid values. In such a scenario the recommended ERP is to retry the action and wait for a link up event. If the issue persists the activation has to fail. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Sigend-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [S390] tape: fix dbf usageSebastian Ott2010-10-292-7/+6
| | | | | | | | | | | | | | | | Get rid of the format string "%s" usage with volatile strings to prevent use after free errors in the s390dbf. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd: provide a Sense Path Group ID ioctlStefan Weinhuber2010-10-292-0/+70
| | | | | | | | | | | | | | | | | | | | The BIODASDSNID ioctl executes a 'Sense Path Group ID' command on a DASD ECKD device. The returned path group data allows user space programs to determine path state and path group ID of the channel paths to the device. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cleanup facility list handlingMartin Schwidefsky2010-10-251-8/+1
| | | | | | | | | | | | | | Store the facility list once at system startup with stfl/stfle and reuse the result for all facility tests. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd: ignore unsolicited interrupts for DIAGStefan Haberland2010-10-251-9/+14
| | | | | | | | | | | | | | | | | | | | | | | | For the DASD DIAG discipline IO is started through special diagnose calls. Unsolicited interrupts may contain information about the device itself. But this information is not needed because the device is not used directly. Fix the case that an unimplemented dicipline function may be called by ignoring unsolicited interrupts for the DIAG disciplin. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd: fix unsolicited interrupt recognitionStefan Weinhuber2010-10-252-41/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dasd interrupt handler needs to distinguish solicited from unsolicited interrupts, as unsolicited interrupts may require special handling (e.g. summary unit checks) and solicited interrupts require proper error recovery for the failed I/O request. The interrupt handler needs to check several bit fields in the interrupt response block (irb) to make this distinction. So far our check of the status control bits has not been specific enough, which may lead to a failed request getting just retried instead of the necessary error recovery. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd: fix use after free in dbfSebastian Ott2010-10-251-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Writing to /proc/dasd/statistics while the debug level of the generic dasd debug entry is set to DBF_DEBUG will lead to an use after free when accessing the debug entry later. Since for the format string "%s" in the s390 dbf only a pointer to the string is stored in the debug feature and the buffer used here is freed afterwards. To fix this just remove the debug message. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cio: fix I/O cancel functionPeter Oberparleiter2010-10-252-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function ccw_device_cancel_halt_clear may cause an unexpected kernel panic if a clear function is currently active at the subchannel for which it is called. In that case, the iretry counter used to determine the number of retries is never initialized, leading to an immediate failure of the function which results in a kernel panic. Fix this by initializing the iretry counter when the function is first called. Also replace the kernel panic with a return code: a single malfunctioning I/O device should not automatically cause a system-wide kernel panic. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cleanup lowcore access from external interruptsMartin Schwidefsky2010-10-254-26/+20
| | | | | | | | | | | | | | Read external interrupts parameters from the lowcore in the first level interrupt handler in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cio: notify drivers of channel path eventsSebastian Ott2010-10-254-8/+63
| | | | | | | | | | | | | | | | | | This patch adds a notification mechanism to inform ccw drivers about changes to channel paths, which occured while the device is online. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] css: update subchannel description after hibernateSebastian Ott2010-10-251-0/+1
| | | | | | | | | | | | | | | | Update the subchannel descriptor while resuming from hibernate in order to obtain current link addresses. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] css: update descriptor after hibernateSebastian Ott2010-10-252-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Update the channel path descriptors after hibernation. This is done unlocked, since we are the only active task at this time. Note: chsc_determine_base_channel_path_desc is changed to use spin_lock_irqsave, since it's called with interrupts disabled in this case. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cio: update descriptor in chsc_chp_varySebastian Ott2010-10-253-9/+11
| | | | | | | | | | | | | | | | Update the channel path descriptor at the beginning of to the vary_on operation. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] chsc: use the global page to determine the chp desriptorSebastian Ott2010-10-253-44/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | chsc_determine_channel_path_desc is called by a wrapper who allocates a response struct. The response data is then memcpy'ed to this response struct by chsc_determine_channel_path_desc. Change chsc_determine_base_channel_path_desc to use the global chsc_page and deliver it to the function doing the actual chsc call. The channel path desriptor is then directly read from the response data. As a result we get rid of the additional allocation for the response struct. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] chsc: consolidate memory allocationsSebastian Ott2010-10-253-136/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most wrappers around the channel subsystem call have their own logic to allocate memory (with proper alignment) or use preallocated or static memory. This patch converts most users of the channel subsystem call to use the same preallocated page (proteced by a spinlock). Note: The sei_page which is used in our crw handler to call "store event information" has to coexist, since a) in crw context, while accessing the sei_page, sleeping is allowed (which will conflict with the spinlock protection of the chsc_page) b) in crw context, while accessing the sei_page, channel subsystem calls are allowed (which itself would require the page). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] chsc: initialization fixesSebastian Ott2010-10-253-17/+17
| | | | | | | | | | | | | | | | | | | | | | This patch fixes: * kfree vs. free_page usage * structure definition for determine_css_characteristics * naming convention for the chsc init function * deregistration of crw handlers in the cleanup path Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cio: add lock to struct channel_pathSebastian Ott2010-10-252-14/+27
| | | | | | | | | | | | | | Serialize access to members of struct channel_path with a mutex. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cio: fix memleak in resume pathSebastian Ott2010-10-251-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a ccwdevice is lost during hibernation and a different ccwdevice is attached to the same subchannel, we will deregister the old ccw device and register the new one. Since deregistration is not allowed in this context, we handle this action later. However, some parts of the registration process for the new device were started anyway, so that the old device structure is no longer accessible. Fix this by deferring both actions to the afterwards scheduled subchannel event. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] cio: remove custom implementation of hex_to_bin()Andy Shevchenko2010-10-251-6/+4
| | | | | | | | | | Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd fix dump_sense_dbfStefan Haberland2010-10-251-6/+10
| | | | | | | | | | | | | | | | | | | | The dasd_eckd_dump_sense_dbf function uses a macro for s390 debug feature that can handle up to 8 parameters (for the DASD device driver). Fix the function to use only the maximum number of parameters. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] css: fix sparse warningSebastian Ott2010-10-251-1/+1
| | | | | | | | | | | | | | | | | | | | fix this sparse warning: drivers/s390/cio/css.c:580:6: warning: symbol 'css_schedule_eval_all_unreg' was not declared. Should it be static? Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] drivers/s390/char: Use static const char arraysJoe Perches2010-10-251-2/+2
| | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd: let recovery cqr inherit flags from failed cqrStefan Weinhuber2010-10-251-0/+3
|/ | | | | | | | | | | | The usual way to recover a failed DASD ECKD request (cqr) is to create a new request with an appropriate recovery CCW program. Certain features, e.g. failfast, can be enabled per request and are stored in the requests flags. These flags have to be copied from the failed to the recovery request, to let the recovery request use the same features as the original one. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'for-next' of ↵Linus Torvalds2010-10-244-9/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
| * drivers/s390: Remove unnecessary casts of private_dataJoe Perches2010-09-231-3/+3
| | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * Fix various typos of valid in commentsNikanth Karthikesan2010-09-211-2/+2
| | | | | | | | | | | | | | Fix various typos of valid. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * Merge branch 'master' into for-nextJiri Kosina2010-08-1116-35/+282
| |\ | | | | | | | | | | | | Conflicts: fs/exofs/inode.c
| * \ Merge branch 'master' into for-nextJiri Kosina2010-08-103-3/+3
| |\ \ | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-omap1/board-nokia770.c
| * | | Fix spelling fuction -> function in commentsStefan Weil2010-08-092-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To avoid more patches, I also fixed other spelling and grammar bugs when they were in the same or following line: successfull -> successful parse -> parses controler -> controller controlers -> controllers Cc: Jiri Kosina <trivial@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2010-10-241-6/+60
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (321 commits) KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages KVM: Fix signature of kvm_iommu_map_pages stub KVM: MCE: Send SRAR SIGBUS directly KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTED KVM: fix typo in copyright notice KVM: Disable interrupts around get_kernel_ns() KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root address KVM: MMU: move access code parsing to FNAME(walk_addr) function KVM: MMU: audit: check whether have unsync sps after root sync KVM: MMU: audit: introduce audit_printk to cleanup audit code KVM: MMU: audit: unregister audit tracepoints before module unloaded KVM: MMU: audit: fix vcpu's spte walking KVM: MMU: set access bit for direct mapping KVM: MMU: cleanup for error mask set while walk guest page table KVM: MMU: update 'root_hpa' out of loop in PAE shadow path KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn() KVM: x86: Fix constant type in kvm_get_time_scale KVM: VMX: Add AX to list of registers clobbered by guest switch KVM guest: Move a printk that's using the clock before it's ready KVM: x86: TSC catchup mode ...
| * | | | KVM: S390: Add virtio hotplug add supportAlexander Graf2010-10-241-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The one big missing feature in s390-virtio was hotplugging. This is no more. This patch implements hotplug add support, so you can on the fly add new devices in the guest. Keep in mind that this needs a patch for qemu to actually leverage the functionality. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * | | | KVM: S390: take a full byte as ext_param indicatorAlexander Graf2010-10-241-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currenty the ext_param field only distinguishes between "config change" and "vring interrupt". We can do a lot more with it though, so let's enable a full byte of possible values and constants to #defines while at it. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
OpenPOWER on IntegriCloud