summaryrefslogtreecommitdiffstats
path: root/drivers/rtc
Commit message (Collapse)AuthorAgeFilesLines
* rtc-m48t59 driver NO_IRQ mode fixupMark Zhan2007-07-311-1/+1
| | | | | | | | | | | | | | | | Since irq in m48t59_private struct is defined as 'unsigned int', which will make the following if sentence to be never true: if (m48t59->irq < 0) m48t59->irq = NO_IRQ; And thus it will make the m48t59_rtc_probe() is failed when the driver is working in a no irq mode: Signed-off-by: Mark Zhan <rongkai.zhan@windriver.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Use menuconfig objects: RTCJan Engelhardt2007-07-311-47/+31
| | | | | | | | | | | Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Remove the arm26 portAdrian Bunk2007-07-311-1/+1
| | | | | | | | | | | | The arm26 port has been in a state where it was far from even compiling for quite some time. Ian Molton agreed with the removal. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Ian Molton <spyro@f2s.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc-dev: Make RTC driver return ENOTTY instead of ENOIOCTLCMDThomas Hommel2007-07-311-0/+2
| | | | | | | | | | Prevent the RTC driver from returning ENOIOCTLCMD to userspace. Signed-off-by: Thomas Hommel <thomas.hommel@gefanuc.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410: fixup after arch movesBen Dooks2007-07-311-1/+1
| | | | | | | | | | Fixup the changes from moving around the arch support for s3c24xx based systems. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23Linus Torvalds2007-07-301-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23: sh: Fix fs.h removal from mm.h regressions. sh: fix get_wchan() for SH kernels without framepointers sh: arch/sh/boot - fix shell usage rtc: rtc-sh: Correct sh_rtc_set_time() for some SH-3 parts. sh: remove support for sh7300 and solution engine 7300 sh: Add sh to the CC_OPTIMIZE_FOR_SIZE dependencies. sh: Kill off virt_to_bus()/bus_to_virt(). sh: sh-sci - fix SH7708 support sh: Restrict DSP support to specific CPUs. sh: Silence sq compile warning on sh4 nommu. sh: Kill the rest of the SE73180 cruft. sh: remove support for sh73180 and solution engine 73180 sh: remove old broken pint code sh: Reclaim beginning of P3 space for vmalloc area. sh: Fix Dreamcast DMA issues. sh: Add kmap_coherent()/kunmap_coherent() interface for SH-4.
| * rtc: rtc-sh: Correct sh_rtc_set_time() for some SH-3 parts.Markus Brunner2007-07-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | Some SH-3 parts (SH7720 and SH7705 at least) need to have the start bit explicitly cleared, as the reset is not enough. This is safe across all parts, so simply clear the start bit in the sh_rtc_set_time() path. Signed-off-by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2007-07-281-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Input Serio: Blackfin doesnt support I8042 - make sure it doesnt get selected Blackfin arch: add BF54x I2C/TWI TWI0 driver support Blackfin On-Chip RTC driver update for supporting BF54x Blackfin Ethernet MAC driver: fix bug Report returned -ENOMEM upwards (in case L1/uncached memory alloc fails) Blackfin arch: add error message when IRQ no available Blackfin arch: Initialize the exception vectors early in the boot process Blackfin arch: fix a compiling warning about dma-mapping Blackfin arch: switch to using proper defines this time THREAD_SIZE and PAGE_SIZE instead of just PAGE_SIZE everywhere Blackfin arch: fix bug which unaligns the init thread's stack and causes the current macro to fail. Blackfin arch: Load P0 before storing through it Blackfin arch: fix KGDB bug, dont forget last parameter. Blackfin arch: add selections for BF544 and BF542 Blackfin arch: use bfin_read_SWRST() now that BF561 provides it Blackfin arch: setup aliases for some core Core A MMRs
| * | Blackfin On-Chip RTC driver update for supporting BF54xMike Frysinger2007-07-151-1/+1
| |/ | | | | | | | | | | Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* | Reorder RTC MakefileAlessandro Zummo2007-07-261-20/+22
| | | | | | | | | | | | | | | | | | | | Alphabetic reordering of the drivers in the rtc subsys makefile. (akpm: merge this asap! Makefiles are the source of many patch conflicts..) Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | rtc-ds1307: typo fix found by coverityDavid Brownell2007-07-261-1/+1
| | | | | | | | | | | | | | | | | | Fix a typo turned up by a Coverity check: referring to the wrong register, which could cause problems with DS1338 RTCs whose oscillators halted. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | fix missing arguments in drivers/rtc/rtc-stk17ta8.cAl Viro2007-07-261-2/+4
| | | | | | | | | | | | | | | | | | | | struct bin_attribute * is needed in bin_attribute ->read()/->write() now. Incidentally, could people please run the fscking compiler before and after applying their patch and compare the build logs? That (and many, many other) would be caught immediately. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Cleanup non-arch xtime uses, use get_seconds() or current_kernel_time().john stultz2007-07-251-2/+3
|/ | | | | | | | | | | | | | | | | | This avoids use of the kernel-internal "xtime" variable directly outside of the actual time-related functions. Instead, use the helper functions that we already have available to us. This doesn't actually change any behaviour, but this will allow us to fix the fact that "xtime" isn't updated very often with CONFIG_NO_HZ (because much of the realtime information is maintained as separate offsets to 'xtime'), which has caused interfaces that use xtime directly to get a time that is out of sync with the real-time clock by up to a third of a second or so. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add support for STK17TA8 chipThomas Hommel2007-07-213-0/+431
| | | | | | | | | | | | | | This patch adds support for the Simtek STK17TA8 timekeeping chip. The STK17TA8 is quite similar to the DS1553, but differs in register layout and in various control bits in the registers. I chose to make this a new driver to avoid confusion in the code and to not get lost in #ifdefs. Signed-off-by: Thomas Hommel <thomas.hommel@gefanuc.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: update and use the MAX6900 century byteDale Farnsworth2007-07-211-24/+72
| | | | | | | | | | | | We now read and write the century byte in the max6900 chip. We probably don't need to do so on Linux-only system, but it's necessary when the chip is shared by another OS that uses the century byte. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc kconfig: point out need for static linkageDavid Brownell2007-07-211-0/+3
| | | | | | | | | | | | Various people have expressed surprise that their modular RTC drivers don't seem to work for initializing the system time at boot. To help avoid such unpleasantness, make the Kconfig text point out that the driver probably needs to be statically linked. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: do not return void valueAtsushi Nemoto2007-07-212-2/+2
| | | | | | | | | | | | | This patch fixes these sparse warnings: drivers/rtc/rtc-ds1742.c:265:2: warning: returning void-valued expression drivers/rtc/rtc-ds1553.c:409:2: warning: returning void-valued expression Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sh: Fix up SH-3 and SH-4 driver dependencies.Paul Mundt2007-07-201-1/+1
| | | | | | | | Both shwdt and rtc-sh are only supported on SH-3 and SH-4 at the moment, don't allow them to break the SH-2 and SH-5 (sh64) builds. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* RTC: add periodic irq support to rtc-cmosAlessandro Zummo2007-07-191-2/+31
| | | | | | | | | | Adds support for periodic irq enabling in rtc-cmos. This could be used by the ALSA driver and is already being tested with the zaptel ztdummy module. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* OMAP: add TI TWL92330/Menelaus Power Management chip driverTony Lindgren2007-07-171-0/+9
| | | | | | | | | | | | | | | | | | | | | | Add Texas Instruments TWL92330/Menelaus Power Management chip driver. This includes voltage regulators, Dual slot memory card tranceivers and real-time clock(RTC). The support for RTC is integrated with this driver only; it is not separate module. Passes 'rtctest' on OMAP H4 EVM, other than lack of "periodic" (1/N second) IRQs. System wakeup alarms (from suspend-to-RAM) work too. The battery keeps the RTC active over power off, so once you set clock (rdate/ntpdate/etc, then "hwclock -w") then RTC_HCTOSYS at boot time will behave as expected. Cc: "Jean Delvare" <khali@linux-fr.org> Cc: "Tony Lindgren" <tony@atomide.com> Cc: "David Brownell" <david-b@pacbell.net> Signed-off-by: Trilok Soni <soni.trilok@gmail.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc-ds1307 becomes new-style i2c driverDavid Brownell2007-07-171-75/+53
| | | | | | | | | | | | | | | | | | Convert the rtc-ds1307 driver into a "new style" driver. Also improve probe() checks: be more correct about switching out of AM/PM mode, and issue a (debug) diagnostic when failing due to bogus register values. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Bill Gatliff <bgat@billgatliff.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc-ds1307: oscillator restart for ds13{37,38,39,40}Rodolfo Giometti2007-07-171-21/+45
| | | | | | | | | | | | | | | | When we find a ds1337 or ds1339 with the oscillator powered off, turn it on. If the oscillator fault flag was set, clear it and warn that the clock needs to be set. David Brownell: Bugfixes; provide corresponding update for ds1338, and the core of the fix for ds1340. Use a common warning message ("SET TIME!") whenever the clock needs to be set after oscillator fault (or oscillator enable, if fault is not a separate status). Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* RTC driver for DS1216 chipsThomas Bogendoerfer2007-07-173-0/+233
| | | | | | | | | | | RTC driver for Dallas/Maxim DS126 chips used in SNI RM200/RM400 [akpm@linux-foundation.org: cleanups] Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add support for the ST M48T59 RTCMark Zhan2007-07-173-0/+502
| | | | | | | | | [akpm@linux-foundation.org: x86_64 build fix] [akpm@linux-foundation.org: The acpi guys changed the bin_attribute code] Signed-off-by: Mark Zhan <rongkai.zhan@windriver.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: watchdog support for rtc-m41t80 driverAtsushi Nemoto2007-07-172-0/+295
| | | | | | | | | | | | Add a watchdog driver interface to rtc-m41t80 driver. This is derived from works by Alexander Bigga <ab@mycable.de> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Alexander Bigga <ab@mycable.de> Cc: David Brownell <david-b@pacbell.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add rtc-m41t80 driverAtsushi Nemoto2007-07-173-0/+642
| | | | | | | | | | | | | | | | | | | | This is a new-style i2c driver for ST M41T80 series RTC chip, derived from works by Alexander Bigga <ab@mycable.de> who wrote the original rtc-m41txx.c based on drivers/i2c/chips/m41t00.c driver. This driver supports M41T8[0-4] and M41ST8[457]. The old m41t00 driver supports M41T00, M41T81 and M41T85(M41ST85). While the M41T00 chip is now supported by rtc-ds1307 driver, this driver does not include support for the chip. [akpm@linux-foundation.org: remove bogus `static'] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Alexander Bigga <ab@mycable.de> Acked-by: Mark A. Greer <mgreer@mvista.com> Cc: David Brownell <david-b@pacbell.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* RTC Kconfig tweaxDavid Brownell2007-07-171-4/+4
| | | | | | | | | | | Minor fix to the Kconfig for RTCs: don't display section headers for I2C or SPI unless they're configured. And depend on SPI_MASTER; having slave support wouldn't help. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* RTC_CLASS is no longer considered EXPERIMENTALAlessandro Zummo2007-07-171-1/+0
| | | | | | | | RTC class is mature enough. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Driver for the Atmel on-chip RTC on AT32AP700x devicesHans-Christian Egtvedt2007-07-173-0/+325
| | | | | | | | | | | | | | | | | | | | | | | | | | | Tested on the AT32AP7000/ATSTK1000. Driver does only suport time, wake up and a very simple alarm, because of hardware limitations. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 From: David Brownell <david-b@pacbell.net> - Strike some alarm setup code that's no longer needed. (This patch seems to have gotten lost somewhere...) - Make the driver name (and its module alias) match what the platform setup code uses, so the driver can bind and hotplug. [akpm@linux-foundation.org: fix several checkpatch.pl warnings] Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc-dev: return -ENOTTY in ioctl if irq_set_freq is not implemented by driverHans-Christian Egtvedt2007-07-171-0/+2
| | | | | | | | | Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc-rs5c372 becomes a new-style i2c driverDavid Brownell2007-07-172-63/+36
| | | | | | | | | | | | | | | | | | | | | | | | Convert rtc-rs5c372 to be a "new style" I2C driver, and update the Kconfig text to be more complete.. Verified on an OMAP H4 development platform, along with a board init patch to declare its rv5c387a device. Only one defconfig -- powerpc/linkstation -- uses this driver; but several other platforms use it, just without defconfig support. Such platforms need to be converted so (a) their I2C adapter driver supports new-style drivers, and (b) board init code declares this I2C device. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Voipio Riku <Riku.Voipio@movial.fi> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Martin Michlmayr <tbm@cyrius.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc-ds1307 cleanupsDavid Brownell2007-07-171-52/+124
| | | | | | | | | | | | | | | | | | | | | This updates the rtc-ds1307 driver so that converting it to a "new style" driver (driver model, not legacy i2c model) will involve fewer changes. - Use pointer to i2c_client almost everywhere, so that it's easy to let the i2c core create that object; - Avoid using i2c_client.adapter, since that field is redundant and thus may go away (same object as i2c_client.dev.parent). - Extend type enum to include various RTCs this is expected to work with, and include register support for them. It also cleans up the support for multiple chip types, and fixes a glitch that could appear with an un-initialized RTC. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'merge' of ↵Linus Torvalds2007-07-161-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (209 commits) [POWERPC] Create add_rtc() function to enable the RTC CMOS driver [POWERPC] Add H_ILLAN_ATTRIBUTES hcall number [POWERPC] xilinxfb: Parameterize xilinxfb platform device registration [POWERPC] Oprofile support for Power 5++ [POWERPC] Enable arbitary speed tty ioctls and split input/output speed [POWERPC] Make drivers/char/hvc_console.c:khvcd() static [POWERPC] Remove dead code for preventing pread() and pwrite() calls [POWERPC] Remove unnecessary #undef printk from prom.c [POWERPC] Fix typo in Ebony default DTS [POWERPC] Check for NULL ppc_md.init_IRQ() before calling [POWERPC] Remove extra return statement [POWERPC] pasemi: Don't auto-select CONFIG_EMBEDDED [POWERPC] pasemi: Rename platform [POWERPC] arch/powerpc/kernel/sysfs.c: Move NUMA exports [POWERPC] Add __read_mostly support for powerpc [POWERPC] Modify sched_clock() to make CONFIG_PRINTK_TIME more sane [POWERPC] Create a dummy zImage if no valid platform has been selected [POWERPC] PS3: Bootwrapper support. [POWERPC] powermac i2c: Use mutex [POWERPC] Schedule removal of arch/ppc ... Fixed up conflicts manually in: Documentation/feature-removal-schedule.txt arch/powerpc/kernel/pci_32.c arch/powerpc/kernel/pci_64.c include/asm-powerpc/pci.h and asked the powerpc people to double-check the result..
| * [POWERPC] Fix drivers/rtc/Kconfig for powerpcWade Farnsworth2007-07-101-1/+1
| | | | | | | | | | | | | | | | | | The powerpc arch uses CONFIG_PPC instead of CONFIG_POWERPC. This fixes drivers/rtc/Kconfig to use the correct config option. Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Acked-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds2007-07-122-10/+12
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (61 commits) sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes sysfs: make directory dentries and inodes reclaimable sysfs: implement sysfs_get_dentry() sysfs: move sysfs_drop_dentry() to dir.c and make it static sysfs: restructure add/remove paths and fix inode update sysfs: use sysfs_mutex to protect the sysfs_dirent tree sysfs: consolidate sysfs spinlocks sysfs: make kobj point to sysfs_dirent instead of dentry sysfs: implement sysfs_find_dirent() and sysfs_get_dirent() sysfs: implement SYSFS_FLAG_REMOVED flag sysfs: rename sysfs_dirent->s_type to s_flags and make room for flags sysfs: make sysfs_drop_dentry() access inodes using ilookup() sysfs: Fix oops in sysfs_drop_dentry on x86_64 sysfs: use singly-linked list for sysfs_dirent tree sysfs: slim down sysfs_dirent->s_active sysfs: move s_active functions to fs/sysfs/dir.c sysfs: fix root sysfs_dirent -> root dentry association sysfs: use iget_locked() instead of new_inode() sysfs: reorganize sysfs_new_indoe() and sysfs_create() sysfs: fix parent refcounting during rename and move ...
| * | sysfs: add parameter "struct bin_attribute *" in .read/.write methods for ↵Zhang Rui2007-07-112-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | sysfs: kill unnecessary attribute->ownerTejun Heo2007-07-112-2/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2007-07-121-114/+72
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Rename PC speaker code [MIPS] Don't use genrtc. [MIPS] Remove unused time.c for swarm [MIPS] Sparse: Use NULL for pointer [MIPS] Fix a sparse warning in arch/mips/pci/pci.c [MIPS] SMTC: Interrupt mask backstop hack [MIPS] separate platform_device registration for VR41xx RTC [MIPS] Separate platform_device registration for VR41xx GPIO [MIPS] MIPSsim: Fix build. [MIPS] separate platform_device registration for VR41xx serial interface [MIPS] Include cacheflush.h in uncache.c [MIPS] Cleanup tlbdebug.h [MIPS] Change names of local variables to silence sparse (part 2) [MIPS] Workaround for a sparse warning in include/asm-mips/io.h [MIPS] RM: Use only phyiscal address for 82596 and 53c710 [MIPS] Hydrogen3: Remove remaining bits of code. [MIPS] DEC: Fix modpost warning. Revert "[MIPS] DEC: Fix modpost warning." [MIPS] Fix resume for 64K page size on R4000 class processors.
| * | [MIPS] separate platform_device registration for VR41xx RTCYoichi Yuasa2007-07-121-114/+72
| |/ | | | | | | | | Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | i2c: Delete outdated x1205 driver documentationJean Delvare2007-07-121-1/+4
|/ | | | | | | | The x1205 driver moved to the RTC subsystem and was significantly modified since then, so just delete the outdated documentation. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
* RTC: use fallback IRQ if PNP tables don't provide oneMatthew Garrett2007-06-011-3/+10
| | | | | | | | | | | | | Intel Macs (and possibly other machines) provide a PNP entry for the RTC, but provide no IRQ. As a result the rtc-cmos driver doesn't allow wakeup alarms. If the RTC is located at the legacy ioport range, assume that it's on IRQ 8 unless the tables say otherwise. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc kconfig clarificationDavid Brownell2007-05-171-3/+3
| | | | | | | | | Make drivers/rtc/Kconfig be clearer about what the various "interfaces" actually mean, by showing path names. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc-omap build fixDavid Brownell2007-05-171-2/+2
| | | | | | | | Fix typo which breaks build. How did that happen? Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2007-05-111-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (28 commits) [MIPS] Rework cobalt_board_id [MIPS] Use RTC_CMOS for Cobalt [MIPS] Use platform_device for Cobalt UART [MIPS] Separate Alchemy processor based boards config [MIPS] Fix build error in atomic64_cmpxchg [MIPS] Run checksyscalls for N32 and O32 ABI [MIPS] tlbex: use __maybe_unused [MIPS] excite: use __maybe_unused [MIPS] Add extern cobalt_board_id [MIPS] Remove unused CONFIG_TOSHIBA_BOARDS [MIPS] Rename tb0229_defconfig to tb0219_defconfig [MIPS] Update tb0229_defconfig; add CONFIG_GPIO_TB0219. [MIPS] Add minimum defconfig for RBHMA4200 [MIPS] SB1: Build fix. [MIPS] Drop __devinit tag from allocate_irqno() and free_irqno() [MIPS] clocksource: use CLOCKSOURCE_MASK() macro [MIPS] Remove LIMITED_DMA support [MIPS] Remove Momenco Jaguar ATX support [MIPS] Remove Momenco Ocelot G support [MIPS] FPU hazard handling ...
| * [MIPS] Use RTC_CMOS for CobaltYoichi Yuasa2007-05-111-1/+1
| | | | | | | | | | Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | rtc-rs5c313.c: add error handling to avoid hardware hangupkogiidena2007-05-111-1/+18
| | | | | | | | | | | | | | | | | | | | Add error processing. Hanging up by an infinite loop is evaded. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | rtc-rs5c313.c: rtc_time value are fixedkogiidena2007-05-111-1/+2
| | | | | | | | | | | | | | | | | | | | Correct an initial value of suruct rtc_ time. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | rtc-rs5c313.c: error and warning are fixedkogiidena2007-05-112-4/+4
|/ | | | | | | | | | Correct a compile error and warning. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [S390] Kconfig: unwanted menus for s390.Martin Schwidefsky2007-05-101-0/+1
| | | | | | | Disable some more menus in the configuration files that are of no interest to a s390 machine. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2007-05-091-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix stacktrace simplification fallout. sh: SH7760 DMABRG support. sh: clockevent/clocksource/hrtimers/nohz TMU support. sh: Truncate MAX_ACTIVE_REGIONS for the common case. rtc: rtc-sh: Fix rtc_dev pointer for rtc_update_irq(). sh: Convert to common die chain. sh: Wire up utimensat syscall. sh: landisk mv_nr_irqs definition. sh: Fixup ndelay() xloops calculation for alternate HZ. sh: Add 32-bit opcode feature CPU flag. sh: Fix PC adjustments for varying opcode length. sh: Support for SH-2A 32-bit opcodes. sh: Kill off redundant __div64_32 symbol export. sh: Share exception vector table for SH-3/4. sh: Always define TRAPA_BUG_OPCODE. sh: __GFP_REPEAT for pte allocations, too. rtc: rtc-sh: Fix up dev_dbg() warnings. sh: generic quicklist support.
OpenPOWER on IntegriCloud