summaryrefslogtreecommitdiffstats
path: root/drivers/rtc/rtc-stmp3xxx.c
Commit message (Collapse)AuthorAgeFilesLines
* drivers/rtc/rtc-stmp3xxx.c: provide timeout for potentially endless loop ↵Lothar Waßmann2013-08-131-10/+25
| | | | | | | | | | | | | | | | | polling a HW bit It's always a bad idea to poll on HW bits without a timeout. The i.MX28 RTC can be easily brought into a state in which the RTC is not running (until after a power-on-reset) and thus the status bits which are polled in the driver won't ever change. This patch prevents the kernel from getting stuck in this case. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-stmp3xxx.c: check the return value from stmp_reset_block()Fabio Estevam2013-07-091-1/+6
| | | | | | | | | | stmp_reset_block() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: rtc-stmp3xxx: remove unnecessary platform_set_drvdata()Jingoo Han2013-07-031-10/+3
| | | | | | | | | | | The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063100 ("device-core: Ensure drvdata = NULL when no driver is bound"). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'cleanup-for-linus' of ↵Linus Torvalds2013-05-021-4/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
| * rtc: stmp3xxx: use stmp_reset_block() insteadShawn Guo2013-04-011-4/+2
| | | | | | | | | | | | | | | | | | | | The function stmp_reset_block() provides the exactly same functionality as mxs_reset_block(). So use stmp_reset_block() instead, so that <mach/common.h> inclusion can be removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: rtc-linux@googlegroups.com
* | rtc: rtc-stmp3xxx: convert stmp3xxx_rtcdrv to dev_pm_opsJingoo Han2013-04-291-9/+8
| | | | | | | | | | | | | | | | | | Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | rtc: rtc-stmp3xxx: use devm_*() functionsJingoo Han2013-04-291-23/+11
|/ | | | | | | | Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: stmp3xxx: add wdt-accessor functionWolfram Sang2013-03-011-0/+64
| | | | | | | | | | | This RTC also includes a watchdog timer. Provide an accessor function for setting the watchdog timeout value which will be picked up by a watchdog driver. Also register the platform_device for the watchdog here to get the boot-time dependencies right. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* drivers/rtc: use of_match_ptr() macroSachin Kamat2013-02-211-1/+2
| | | | | | | | | | This eliminates having an #ifdef returning NULL for the case when OF is disabled. Maintains consistency in cases where OF is always selected. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: stmp3xxx: Add simple binding for the stmp3xxx-rtcMarek Vasut2012-07-031-0/+8
| | | | | | | | | | Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: rtc-linux@googlegroups.com Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* rtc: convert drivers/rtc/* to use module_platform_driver()Axel Lin2012-01-101-12/+1
| | | | | | | | | | | | | | | | | | | | | This patch converts the drivers in drivers/rtc/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Ben Dooks <ben@simtec.co.uk> Cc: John Stultz <john.stultz@linaro.org> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: stmp3xxx: Remove UIE handlersWolfram Sang2011-07-011-43/+18
| | | | | | | | | | | | The RTC core handles UIE since 6610e08 (RTC: Rework RTC code to use timerqueue for events), so remove the specific interrupt in this driver. To make it work at all, enable interrupts in set_alarm() if needed. Drop IRQF_DISABLED which is deprecated, while we are here. Finally, add my copyright after all these changes. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
* rtc: stmp3xxx: Get rid of mach-specific accessorsWolfram Sang2011-07-011-30/+34
| | | | | | | | | | Replace the accessors with standard readl/writel to remove their platform-dependency. Also, drop __raw_(read|write)l-accessors while we are here. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
* rtc: stmp3xxx: Initialize drvdata before registering deviceWolfram Sang2011-07-011-2/+5
| | | | | | | | | | | | | | | | | Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") uncovered an issue in a number of RTC drivers, where the drivers call rtc_device_register before initializing the device or platform drvdata. This frequently results in null pointer dereferences when the rtc_device_register immediately makes use of the rtc device, calling rtc_read_alarm. The solution is to ensure the drvdata is initialized prior to registering the rtc device. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
* rtc: stmp3xxx: Port stmp-functions to mxs-equivalentsWolfram Sang2011-07-011-14/+14
| | | | | | | | | | | | | The stmp3xxx driver used to include functions from a stmp-specific include. Because of consolidation, plat-stmp has now been removed and merged with the compatible mach-mxs. Use the apropriate mxs-functions for transition. The accessors will be converted to readl/writel in a later patch. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
* rtc: stmp3xxx: Restore register definitionsWolfram Sang2011-07-011-37/+60
| | | | | | | | | | | The stmp3xxx driver used to include register names from a stmp-specific include. Because of consolidation, plat-stmp has now been removed and merged with the compatible mach-mxs. Restore the register names directly in the driver and rename them to be specific to this driver. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
* RTC: Cleanup rtc_class_ops->update_irq_enable()John Stultz2011-03-091-15/+0
| | | | | | | | | | | | | | | Now that the generic code handles UIE mode irqs via periodic alarm interrupts, no one calls the rtc_class_ops->update_irq_enable() method anymore. This patch removes the driver hooks and implementations of update_irq_enable if no one else is calling it. CC: Thomas Gleixner <tglx@linutronix.de> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> CC: rtc-linux@googlegroups.com Signed-off-by: John Stultz <john.stultz@linaro.org>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* rtc: add Freescale stmp37xx/378x driverdmitry pervushin2009-09-231-0/+304
Add support for RTC on the Freescale STMP37xx/378x platform. Signed-off-by: dmitry pervushin <dpervushin@embeddedalley.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud