summaryrefslogtreecommitdiffstats
path: root/drivers/regulator/max8925-regulator.c
Commit message (Collapse)AuthorAgeFilesLines
* mfd: max8925: Remove array in regulator platform dataHaojian Zhuang2012-09-191-18/+17
| | | | | | | | | | Remove array in parent's platform data. Use struct regulator_init_data as regulator device's platform data directly. So a lot of pdata are added into parent's platform data. And voltage out register offset is used as IORESOURCE_REG to distinguish different regualtor devices. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: max8925: Remove check_range function and max_uV from struct ↵Axel Lin2012-05-171-12/+0
| | | | | | | | | | | | rc5t583_regulator_info This driver has been converted to use regulator_map_voltage_linear and set_voltage_sel now. regulator_map_voltage_linear will check the the voltage falls within specified range. The check_range() function and max_uV field are not used now, remove them. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: max8925: Convert to set_voltage_sel() and map_voltage()Axel Lin2012-05-141-15/+8
| | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: max8925: Convert to regulator_list_voltage_linear()Axel Lin2012-05-141-17/+8
| | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: max8925: Convert to get_voltage_selAxel Lin2012-05-141-4/+4
| | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: core: Use a struct to pass in regulator runtime configurationMark Brown2012-04-091-2/+6
| | | | | | | | | | | | | | Rather than adding new arguments to regulator_register() every time we want to add a new bit of dynamic information at runtime change the function to take these via a struct. By doing this we avoid needing to do further changes like the recent addition of device tree support which required each regulator driver to be updated to take an additional parameter. The regulator_desc which should (mostly) be static data is still passed separately as most drivers are able to configure this statically at build time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: Add missing n_voltages setting for max8925Axel Lin2012-04-021-10/+5
| | | | | | | | | | The n_voltages are the same for all regulators: (max - min / step) + 1 == 64. The vol_shift is always 0, and the vol_nbits is always the same as n_voltages setting. Thus we can remove vol_shitf and vol_nbits fields from struct max8925_regulator_info. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: Set list_voltage callback for max8925Axel Lin2012-04-021-0/+2
| | | | | | | | Current code implements max8925_list_voltage but does not set the list_voltage callback function in max8925_regulator_[ldo|sdv]_ops. Fix it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: max8925: Use DIV_ROUND_UP macroAxel Lin2012-03-131-2/+2
| | | | | | | Use DIV_ROUND_UP macro for better readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: max8925: fix enabled/disabled judgement mistakeKevin Liu2012-01-061-13/+20
| | | | | | | | | | | | | | | | | Max8925 ldo status should be determined by two factors: 1. power up/down sequence selection(LDOCTL[4:2]). 2. i2c enable bit(LDOCTL[0]). Max8925 ldo support two types of power up/down sequence: 1. flexible sequence(LDOCTL[4:2] = 0~6). 2. i2c sequence(LDOCTL[4:2] = 7). With flexible sequence selected, the ldo is enabled during power up by default. With i2c sequence selected, the ldo is controlled by the i2c enable bit(LDOCTL[0]). Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: pass additional of_node to regulator_register()Rajendra Nayak2011-11-231-1/+1
| | | | | | | | | | | With device tree support for regulators, its needed that the regulator_dev->dev device has the right of_node attached. To be able to do this add an additional parameter to the regulator_register() api, wherein the dt-adapted driver can then pass this additional info onto the regulator core. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: Add module.h to drivers/regulator users as requiredPaul Gortmaker2011-10-311-0/+1
| | | | | | | | Another group of drivers that are taking advantage of the implicit presence of module.h -- and will break when we pull the carpet out from under them during a cleanup. Fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* regulator: Enable max8925 i2c sequence for controlHaojian Zhuang2011-05-261-3/+8
| | | | | | | | | | Force to enable i2c as power up/down sequence. Otherwise, SD/LDO can't be enabled or disabled via accessing i2c bus. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: Report actual configured voltage to set_voltage()Mark Brown2011-01-121-1/+2
| | | | | | | | | | | Change the interface used by set_voltage() to report the selected value to the regulator core in terms of a selector used by list_voltage(). This allows the regulator core to know the voltage that was chosen without having to do an explict get_voltage(), which would be much more expensive as it will generally access hardware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: fix enabling regulator issue on max8925Haojian Zhuang2010-04-281-1/+1
| | | | | | | | Fix regulator enabling issue that is caused by typo error in is_enabled(). Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* Regulators: max8925-regulator - clean up driver data after removalDmitry Torokhov2010-03-221-2/+4
| | | | | | | | | | It is a good tone to reset driver data after unbinding the device. Also change find_regulator_info() fro inline to __devinit - let compiler figure out if it wants it to be inlined or not. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Add max8925 supportHaojian Zhuang2010-03-071-0/+306
MAX8925 contains 3 Buck and 20 LDO regulator. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
OpenPOWER on IntegriCloud