summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pcie
Commit message (Collapse)AuthorAgeFilesLines
* Revert "PCI: PCIE ASPM support"Greg Kroah-Hartman2008-02-023-825/+0
| | | | | | | | | | | This reverts commit 6c723d5bd89f03fc3ef627d50f89ade054d2ee3b. It caused build errors on non-x86 platforms, config file confusion, and even some boot errors on some x86-64 boxes. All around, not quite ready for prime-time :( Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: PCIE ASPM supportShaohua Li2008-02-013-0/+825
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Run ACPI _OSC method on root bridges onlyAndrew Patterson2008-02-011-16/+6
| | | | | | | | | | | | According to the PCI Firmware Specification Revision 3.0 section 4.5, _OSC should only be called on a root brdige. Here is the relevant passage: "The _OSC interface defined in this section applies only to Host Bridge ACPI devices that originate PCI, PCI-X, or PCI Express hierarchies". Changed the code to find the parent root bridge of the device and call _OSC on that. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI ACPI: AER driver should only register PCIe devices with _OSCAndrew Patterson2008-02-011-1/+1
| | | | | | | | | AER is only used with PCIe devices so we should only check PCIe devices for _OSC support. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* pcie port driver: correctly detect native PME featureShaohua Li2008-02-011-3/+2
| | | | | | | | | Native PME is capability of root port or root complex event collector. It's not determined by PCI PME capability. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* pci-aer: fix kernel-doc mistakesRandy Dunlap2007-11-281-14/+15
| | | | | | | | | | Fix kernel-doc parameter names and ending block comments (change **/ to */). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Linas Vepstas <linas@linas.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: pcie portdriver: initialize returned valueLinas Vepstas2007-11-281-1/+1
| | | | | | | | | | The pcie protdrv status can be returned uninitialized, if there are no children under a device. This leads to bad responses downstream. Fix this. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* pci: implement "pci=noaer"Randy Dunlap2007-10-121-0/+9
| | | | | | | | | | | | For cases in which CONFIG_PCIEAER=y (such as distro kernels), allow users to disable PCIE Advanced Error Reporting by using "pci=noaer" on the kernel command line. This can be used to work around hardware or (kernel) software problems. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* pciehp: remove CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODEKenji Kaneshige2007-10-121-9/+0
| | | | | | | | | | | | | | Remove unnecessary CONFIG_HOTPLUG_PCI_PCIE_EVENT_MODE. The CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE option is not needed because polling mechanism can be enabled through 'pciehp_poll_mode' module option. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau2007-07-191-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PCI: pcie: remove SPIN_LOCK_UNLOCKEDMilind Arun Choudhary2007-07-111-1/+1
| | | | | | Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI aer: add pci_cleanup_aer_correct_aer_statusStephen Hemminger2007-07-111-0/+16
| | | | | | | | | | | | | Function to clear bogus correctable errors. Analog to pci_aer_uncorrect_are_status. The Marvell chips seem to start out with a bogus value that needs to be cleared. Yanmin ported it to 2.6.22-rc4 by fixing a fuzz patch applying info. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Acked-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: fix AER driver error informationZhang, Yanmin2007-07-115-41/+32
| | | | | | | | | | | | | | | | | | | | Below patch fixes aer driver error information and enables aer driver although CONFIG_ACPI=n. As a matter of fact, the new patch is created from below 2 patches plus a minor patch apply fuzz fixing. Because the second patch fixed a compilation error introduced by the first patch, I merge them to facilitate bisect. 1) http://marc.info/?l=linux-kernel&m=117783233918191&w=2; 2) http://marc.info/?l=linux-mm-commits&m=118046936720790&w=2 Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Detach sched.h from mm.hAlexey Dobriyan2007-05-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PCI: Fix warning message in PCIE port driverPrarit Bhargava2007-03-261-1/+1
| | | | | | | | PCIE error output should conform to vendor_id:device_id. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: aer: fix section mismatch warningSam Ravnborg2007-03-091-3/+3
| | | | | | | | | | | Fix following section mismatch warning (when compiled with CONFIG_HOTPLUG=n): WARNING: drivers/pci/built-in.o - Section mismatch: reference to .init.text:aer_probe from .data between 'aerdrv' (at offset 0x1608) and 'aer_error_handlers' Warning was fixed by renaming aerdrv to aerdriver so we pass the whitelist. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* pcie: fix section mismatch warningSam Ravnborg2007-03-091-3/+3
| | | | | | | | | | | | Fix following section mismatch warning (when compiled with CONFIG_HOTPLUG=n): WARNING: drivers/pci/built-in.o - Section mismatch: reference to .init.text:pcie_portdrv_probe from .data between 'pcie_portdrv' (at offset 0xe40) and 'pcie_portdrv_err_handler' This warning was fixed by renaming pcie_portdrv to pcie_portdriver so we pass the whitelist. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Fix typos concerning hierarchyUwe Kleine-König2007-02-171-1/+1
| | | | | | | | heirarchical, hierachical -> hierarchical heirarchy, hierachy -> hierarchy Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner2007-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PCI: pcieport-driver: remove invalid warning messageKenji Kaneshige2006-12-201-1/+1
| | | | | | | | | | | The following warning message should not be displayed for devices which don't use an interrupt pin. pcie_portdrv_probe->Dev[XXXX:XXXX] has invalid IRQ. Check vendor BIOS Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day2006-12-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* WorkStruct: Pass the work_struct pointer instead of context dataDavid Howells2006-11-223-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
* PCI: fix pcie_portdrv_restore_config undefined without CONFIG_PM errorZhang, Yanmin2006-10-181-1/+1
| | | | | | | | | | | | | | | | On Thu, 2006-09-28 at 03:42, Olaf Hering wrote: > PCI-Express AER implemetation: pcie_portdrv error handler > > This patch breaks if CONFIG_PM is not enabled, > pcie_portdrv_restore_config() will be undefined. I move the definition of pcie_portdrv_restore_config out of CONFIG_PM. Below patch is against 2.6.18-mm1. Could you try it? Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: pcie-check-and-return-bus_register-errors fixAndrew Morton2006-10-182-3/+4
| | | | | | | | | __must_check goes on the declaration, not the definition. Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* PCI: fix __must_check warningsGreg Kroah-Hartman2006-09-263-9/+16
| | | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI-Express AER implemetation: pcie_portdrv error handlerZhang, Yanmin2006-09-261-21/+175
| | | | | | | | Patch 4 implements error handlers for pcie_portdrv. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI-Express AER implemetation: AER core and aerdriverZhang, Yanmin2006-09-269-0/+1568
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch 3 implements the core part of PCI-Express AER and aerdrv port service driver. When a root port service device is probed, the aerdrv will call request_irq to register irq handler for AER error interrupt. When a device sends an PCI-Express error message to the root port, the root port will trigger an interrupt, by either MSI or IO-APIC, then kernel would run the irq handler. The handler collects root error status register and schedules a work. The work will call the core part to process the error based on its type (Correctable/non-fatal/fatal). As for Correctable errors, the patch chooses to just clear the correctable error status register of the device. As for the non-fatal error, the patch follows generic PCI error handler rules to call the error callback functions of the endpoint's driver. If the device is a bridge, the patch chooses to broadcast the error to downstream devices. As for the fatal error, the patch resets the pci-express link and follows generic PCI error handler rules to call the error callback functions of the endpoint's driver. If the device is a bridge, the patch chooses to broadcast the error to downstream devices. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI-Express AER implemetation: export pcie_port_bus_typeZhang, Yanmin2006-09-261-0/+1
| | | | | | | | Patch 2 exports pcie_port_bus_type. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCIE: check and return bus_register errorsRandy Dunlap2006-09-263-5/+11
| | | | | | | | | Have pcie_port_bus_register() notice and return errors. Mark it __must_check so that its caller(s) must check its return value. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCIE: cleanup on probe errorRandy Dunlap2006-08-031-1/+3
| | | | | | | | | | | | | If pcie_portdrv_probe() fails but it had already called pci_enable_device(), then call pci_disable_device() when returning error. Is there some reason that this isn't being done? or was it just missed? Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* pcie: fix warnings when CONFIG_PM=nHenrik Kretzschmar2006-08-031-17/+17
| | | | | | | Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: kzalloc() conversion in drivers/pciEric Sesterhenn2006-03-231-2/+1
| | | | | | | | this patch converts drivers/pci to kzalloc usage. Compile tested with allyes config. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: remove msi save/restore code in specific driverShaohua Li2006-03-232-63/+4
| | | | | | | Remove pcie port driver's msi save/restore code. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCIE: make bus_id for PCI Express devices uniqueSergey Vlasov2006-01-091-2/+2
| | | | | | | | | The bus_id string must be unique for all devices of that bus in the system, not just for devices with the same parent - otherwise multiple symlinks with identical names appear in /sys/bus/pci_express/devices. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] fix missing includesTim Schmielau2005-10-302-0/+3
| | | | | | | | | | | | | | | | | | | | | I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King2005-10-281-2/+2
| | | | | | | | | | | | | | | | In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: start paying attention to a lot of pci function return valuesGreg Kroah-Hartman2005-09-081-2/+6
| | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pm: more u32 vs. pm_message_t fixesPavel Machek2005-07-071-3/+3
| | | | | | | | Few more u32 vs. pm_message_t fixes. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] PCI: acpi tg3 ethernet not coming back properly after S3 suspendon ↵long2005-07-013-1/+91
| | | | | | | | | | DellM70 This patch, is based on kernel 2.6.12, provides a fix for PCIe port bus driver suspend/resume. Signed-off-by: T. Long Nguyen <tom.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] use device_for_each_child() to properly access child devices.long2005-06-201-74/+65
| | | | | | | | | | | | | | On Friday, March 25, 2005 8:47 PM Greg KH wrote: >Here's a fix for pci express. For some reason I don't think they are >using the driver model properly here, but I could be wrong... Thanks for making the changes. However, changes in functions: void pcie_port_device_remove(struct pci_dev *dev) and static int remove_iter(struct device *dev, void *data) are not correct. Please use the patch, which is based on kernel 2.6.12-rc1, below for a fix for these. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI Hotplug: get pciehp to work on the downstream port of a switchDely Sy2005-05-171-1/+2
| | | | | | | | | Here is the updated patch to get pciehp driver to work for downstream port of a switch and handle the difference in the offset value of PCI Express capability list item of different ports. Signed-off-by: Dely Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] fix u32 vs. pm_message_t in PCI, PCIEPavel Machek2005-04-164-7/+7
| | | | | | | | This fixes drivers/pci (mostly pcie stuff). Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-166-0/+717
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud