summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* igb: remove rx checksum good counterAlexander Duyck2009-10-283-3/+0
| | | | | | | | | | | Counting packets with a good checksum can cause a significant amount of cache line bouncing due to the shared counter being written to by all of the queues. In order to avoid this I am removing the counter since we still have the checksum failed counter which will tell us if there are any issues. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb: add new data structure for handling interrupts and NAPIAlexander Duyck2009-10-283-392/+534
| | | | | | | | | | | Add a new igb_q_vector data structure to handle interrupts and NAPI. This helps to abstract the rings away from the adapter struct. In addition it allows for a bit of consolidation since a tx and rx ring can share a q_vector. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atl1c: duplicate atl1c_get_tpdJie Yang2009-10-271-2/+0
| | | | | | | remove duplicate atl1c_get_tpd, it may cause hardware to send wrong packets. Signed-off-by: Jie Yang <jie.yang@atheros.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: Remove bond_dev from xmit_hash_policy call.Jasper Spaans2009-10-273-15/+10
| | | | | | | | | | | Now that the bonding device is no longer used in determining the device to which to send packets, it can be dropped from the argument list of the various xmit_hash_policy calls. Signed-off-by: Jasper Spaans <spaans@fox-it.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-10-2756-362/+5932
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sh_eth.c
| * sh_eth: Add asm/cacheflush.hNobuhiro Iwamatsu2009-10-261-0/+1
| | | | | | | | | | | | | | | | Add include asm/cacheflush.h, because declaration of __flush_purge_region moved to asm/cacheflush.h. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * PPPoE: Fix flush/close races.Michal Ostrowski2009-10-261-61/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
| * e1000e: allow for swflag to be held over consecutive PHY accessesBruce Allan2009-10-264-141/+346
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCH-based parts (82577/82578) and some ICH8-based parts (82566) need to hold the swflag (sw/fw/hw hardware semaphore) over consecutive PHY accesses in order to perform sw-driven PHY configuration during initialization to workaround known hardware issues (see follow-on patch). This patch provides new PHY read/write functions (and function pointers) that will allow accessing the PHY registers assuming the swflag has already been acquired. The actual PHY register access code has moved into helper functions that are called with a flag indicating whether or not the swflag has already been acquired and acquires/releases it if not. The functions called from within the updated PHY access functions had to be updated to assume the swflag was already acquired, and other functions that called those functions were also updated to acquire/release the swflag. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * e1000e: separate mutex usage between NVM and PHY/CSR register for ICHx/PCHBruce Allan2009-10-261-31/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | Accesses to NVM and PHY/CSR registers on ICHx/PCH-based parts are protected from concurrent accesses with a mutex that is acquired when the access is initiated and released when the access has completed. However, the two types of accesses should not be protected by the same mutex because the driver may have to access the NVM while already holding the mutex over several consecutive PHY/CSR accesses which would result in livelock. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * e1000e: 82577/82578 requires a different method to configure LPLUBruce Allan2009-10-261-0/+40
| | | | | | | | | | | | | | | | | | | | Unlike previous ICHx-based parts, the PCH-based parts (82577/82578) require LPLU (Low Power Link Up, or "reverse auto-negotiation") to be configured in the PHY rather than the MAC. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * e1000e: increase swflag acquisition timeout for ICHx/PCHBruce Allan2009-10-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | In some conditions (e.g. when AMT is enabled on the system), it is possible to take an extended period of time to for the driver to acquire the sw/fw/hw hardware semaphore used to protect against concurrent access of a shared resource (e.g. PHY registers). This could cause PHY registers to not get configured properly resulting in link issues. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * e1000e: clear PHY wakeup bit after LCD reset on 82577/82578Bruce Allan2009-10-261-1/+9
| | | | | | | | | | | | | | | | | | | | Performing a dummy read of the PHY Wakeup Control (WUC) register clears the wakeup enable bit set by an PHY reset. If this bit remains set, link problems may occur. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * igbvf: fix memory leak when ring size changed while interface downAlexander Duyck2009-10-261-13/+17
| | | | | | | | | | | | | | | | | | This patch resolves a memory leak which occurs while changing the ring size while the interface is down. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbe: fix memory leak when resizing rings while interface is downAlexander Duyck2009-10-261-9/+13
| | | | | | | | | | | | | | | | | | This patch resolves a memory leak that occurs when you resize the rings via the ethtool -G option while the interface is down. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * igb: fix memory leak when setting ring size while interface is downAlexander Duyck2009-10-261-13/+22
| | | | | | | | | | | | | | | | | | | | | | | | Changing ring sizes while the interface was down was causing a double allocation of the receive and transmit rings. This issue is amplified when there are multiple rings enabled. To prevent this we need to add an additional check which will just update the ring counts when the interface is not up and skip the allocation steps. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: Modify hash transmit policies to use the packet's source MAC addressJasper Spaans2009-10-241-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Modify bonding hash transmit policies to use the psource MAC address of the packet instead of the MAC address configured for the bonding device. The old sitation conflicts with the documentation. Signed-off-by: Jasper Spaans <spaans@fox-it.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * DM9000: Fix revision ID for DM9000BBen Dooks2009-10-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | The DM9000B revision ID is 0x1A, not 0x1B as set in the curernt dm9000.h header. Fix bug reported by Paolo Zebelloni. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
| * r8169: fix Ethernet Hangup for RTL8110SC rev dSimon Wunderlich2009-10-241-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 8110SC rev d chip on our board shows a regression which the 8110SB chip did not have. When inbound traffic is overflowing the receive descriptor queue, "holes" in the ring buffer may occur which lead to a hangup until the buffer is filled again. The packets are than completely processed, but the ring remains porous and no packets are processed until the next overflow. Setting the interface down and up can fix the problem temporary from userspace. For some reason we don't know, this behaviour is not occuring if the RxVlan bit for hardware VLAN untagging is set. There is another "Work around for AMD plateform" in the current code which checks the VLAN status word in receive descriptors, but does never come to effect when hardware VLAN support is enabled. We assume that this is a bug in the chip. The following patch fixes the problem. Without the patch we could reproduce the hang within minutes (given other devices also generating lots of interrupts), without we couldn't reproduce within a few days of long term testing. This version contains minor style adjustments and is sent with mutt which will hopefully not destroy the formatting again. Signed-off-by: Bernhard Schmidt <bernhard.schmidt@saxnet.de> Signed-off-by: Simon Wunderlich <simon.wunderlich@saxnet.de> Acked-by: Francois Romieu <romieu@zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ifb: should not use __dev_get_by_index() without locksEric Dumazet2009-10-221-1/+2
| | | | | | | | | | | | | | | | At this point (ri_tasklet()), RTNL or dev_base_lock are not held, we must use dev_get_by_index() instead of __dev_get_by_index() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: au1000_eth: add missing capability.hManuel Lauss2009-10-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | fixes the following build failure: CC drivers/net/au1000_eth.o /drivers/net/au1000_eth.c: In function 'au1000_set_settings': /drivers/net/au1000_eth.c:623: error: implicit declaration of function 'capable' /drivers/net/au1000_eth.c:623: error: 'CAP_NET_ADMIN' undeclared (first use in this function) /drivers/net/au1000_eth.c:623: error: (Each undeclared identifier is reported only once /drivers/net/au1000_eth.c:623: error: for each function it appears in. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * myri10ge: improve port type reporting in ethtoolBrice Goglin2009-10-221-3/+14
| | | | | | | | | | | | | | | | | | Improve the reporting of myri10ge port type in ethtool, and update for new boards. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * e1000e: reset the PHY on 82577/82578 when going to SxBruce Allan2009-10-221-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | The PHY on 82577/82578 parts needs a soft reset when transitioning to Sx state in order for the PHY write which disables gigabit speed to take effect. Gigabit speed must be disabled in order for the PHY writes to registers on page 800 (the wakeup control registers) to work as expected otherwise the system might not wake via WoL. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * netxen: avoid undue board config checkDhananjay Phadke2009-10-221-10/+4
| | | | | | | | | | | | | | | | | | | | Old code assumed board config version in the flash to be 1. When this will get changed by tools, driver just refuses to attach. This is unnecessary since driver does not have to parse board config structure directly (maintained by firmware). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * netxen: fix tx timeout handling on firmware hangAmit Kumar Salecha2009-10-221-0/+1
| | | | | | | | | | | | | | | | | | | | Clear NX_RESETING bit in netxen_tx_timeout_task() so that the firmware watchdog task can catch need_reset request from tx timeout. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * netxen: fix i2c initDhananjay Phadke2009-10-222-6/+3
| | | | | | | | | | | | | | | | Avoid resetting subsys ID in i2c block. Also remove duplicate check for address tranlsation error. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * niu: VLAN_ETH_HLEN should be used to make sure that the whole MAC header was ↵Joyce Yu2009-10-211-1/+1
| | | | | | | | | | | | | | copied to the head buffer in the Vlan packets case Signed-off-by: Joyce Yu <joyce.yu@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * KS8851: Fix ks8851_set_rx_mode() for IFF_MULTICASTBen Dooks2009-10-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In ks8851_set_rx_mode() the case handling IFF_MULTICAST was also setting the RXCR1_AE bit by accident. This meant that all unicast frames where being accepted by the device. Remove RXCR1_AE from this case. Note, RXCR1_AE was also masking a problem with setting the MAC address properly, so needs to be applied after fixing the MAC write order. Fixes a bug reported by Doong, Ping of Micrel. This version of the patch avoids setting RXCR1_ME for all cases. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
| * KS8851: Fix MAC address write orderBen Dooks2009-10-202-4/+34
| | | | | | | | | | | | | | | | | | | | | | | | The MAC address register was being written in the wrong order, so add a new address macro to convert mac-address byte to register address and a ks8851_wrreg8() function to write each byte without having to worry about any difficult byte swapping. Fixes a bug reported by Doong, Ping of Micrel. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
| * KS8851: Add soft reset at probe timeBen Dooks2009-10-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Issue a full soft reset at probe time. This was reported by Doong Ping of Micrel, but no explanation of why this is necessary or what bug it is fixing. Add it as it does not seem to hurt the current driver and ensures that the device is in a known state when we start setting it up. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fix section mismatch in fec.cSteven King2009-10-201-1/+1
| | | | | | | | | | | | | | | | fec_enet_init is called by both fec_probe and fec_resume, so it shouldn't be marked as __init. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ethoc: clear only pending irqsThomas Chou2009-10-181-1/+1
| | | | | | | | | | | | | | | | | | This patch fixed the problem of dropped packets due to lost of interrupt requests. We should only clear what was pending at the moment we read the irq source reg. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ethoc: inline regs accessThomas Chou2009-10-181-9/+10
| | | | | | | | | | Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
| * vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=nRandy Dunlap2009-10-162-10/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vmxnet3 was using dprintk() for debugging output. This was defined in <linux/dst.h> and was the only thing that was used from that header file. This caused compile errors when CONFIG_BLOCK was not enabled due to bio* and BIO* uses in the header file, so change this driver to use dev_dbg() for debugging output. include/linux/dst.h:520: error: dereferencing pointer to incomplete type include/linux/dst.h:520: error: 'BIO_POOL_BITS' undeclared (first use in this function) include/linux/dst.h:521: error: dereferencing pointer to incomplete type include/linux/dst.h:522: error: dereferencing pointer to incomplete type include/linux/dst.h:525: error: dereferencing pointer to incomplete type make[4]: *** [drivers/net/vmxnet3/vmxnet3_drv.o] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * virtio_net: use dev_kfree_skb_any() in free_old_xmit_skbs()Eric Dumazet2009-10-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because netpoll can call netdevice start_xmit() method with irqs disabled, drivers should not call kfree_skb() from their start_xmit(), but use dev_kfree_skb_any() instead. Oct 8 11:16:52 172.30.1.31 [113074.791813] ------------[ cut here ]------------ Oct 8 11:16:52 172.30.1.31 [113074.791813] WARNING: at net/core/skbuff.c:398 \ skb_release_head_state+0x64/0xc8() Oct 8 11:16:52 172.30.1.31 [113074.791813] Hardware name: Oct 8 11:16:52 172.30.1.31 [113074.791813] Modules linked in: netconsole ocfs2 jbd2 quota_tree \ ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs crc32c drbd cn loop \ serio_raw psmouse snd_pcm snd_timer snd soundcore snd_page_alloc virtio_net pcspkr parport_pc parport \ i2c_piix4 i2c_core button processor evdev ext3 jbd mbcache dm_mirror dm_region_hash dm_log dm_snapshot \ dm_mod ide_cd_mod cdrom ata_generic ata_piix virtio_blk libata scsi_mod piix ide_pci_generic ide_core \ virtio_pci virtio_ring virtio floppy thermal fan thermal_sys [last unloaded: netconsole] Oct 8 11:16:52 172.30.1.31 [113074.791813] Pid: 11132, comm: php5-cgi Tainted: G W \ 2.6.31.2-vserver #1 Oct 8 11:16:52 172.30.1.31 [113074.791813] Call Trace: Oct 8 11:16:52 172.30.1.31 [113074.791813] <IRQ> [<ffffffff81253cd5>] ? \ skb_release_head_state+0x64/0xc8 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81253cd5>] ? skb_release_head_state+0x64/0xc8 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81049ae1>] ? warn_slowpath_common+0x77/0xa3 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81253cd5>] ? skb_release_head_state+0x64/0xc8 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81253a1a>] ? __kfree_skb+0x9/0x7d Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffffa01cb139>] ? free_old_xmit_skbs+0x51/0x6e \ [virtio_net] Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffffa01cbc85>] ? start_xmit+0x26/0xf2 [virtio_net] Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8126934f>] ? netpoll_send_skb+0xd2/0x205 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffffa0429216>] ? write_msg+0x90/0xeb [netconsole] Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81049f06>] ? __call_console_drivers+0x5e/0x6f Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8102b49d>] ? kvm_clock_read+0x4d/0x52 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8104a082>] ? release_console_sem+0x115/0x1ba Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8104a632>] ? vprintk+0x2f2/0x34b Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8106b142>] ? vx_update_load+0x18/0x13e Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81308309>] ? printk+0x4e/0x5d Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8102b49d>] ? kvm_clock_read+0x4d/0x52 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81070b62>] ? getnstimeofday+0x55/0xaf Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81062683>] ? ktime_get_ts+0x21/0x49 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff810626b7>] ? ktime_get+0xc/0x41 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81062788>] ? hrtimer_interrupt+0x9c/0x146 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81024a4b>] ? smp_apic_timer_interrupt+0x80/0x93 Oct 8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81011663>] ? apic_timer_interrupt+0x13/0x20 Oct 8 11:16:52 172.30.1.31 [113074.791813] <EOI> [<ffffffff8130a9eb>] ? _spin_unlock_irq+0xd/0x31 Reported-and-tested-by: Massimo Cetra <mcetra@navynet.it> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Bug-Entry: http://bugzilla.kernel.org/show_bug.cgi?id=14378 Signed-off-by: David S. Miller <davem@davemloft.net>
| * be2net: fix support for PCI hot plugSathya Perla2009-10-142-11/+22
| | | | | | | | | | | | | | | | | | Before issuing any cmds to the FW, the driver must first wait till the fW becomes ready. This is needed for PCI hot plug when the driver can be probed while the card fw is being initialized. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * be2net: fix promiscuous and multicast promiscuous modes being enabled alwaysSathya Perla2009-10-143-14/+18
| | | | | | | | | | Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * vmxnet: fix 2 build problemsRandy Dunlap2009-10-142-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vmxnet3 uses in_dev* interfaces so it should depend on INET. Also fix so that the driver builds when CONFIG_PCI_MSI is disabled. vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy' drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bhavesh davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: add support for STMicroelectronics Ethernet controllers.Giuseppe Cavallaro2009-10-1416-0/+5178
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers (Synopsys IP blocks). Driver documentation: o http://stlinux.com/drupal/kernel/network/stmmac Revisions: o http://stlinux.com/drupal/kernel/network/stmmac-driver-revisions Performances: o http://stlinux.com/drupal/benchmarks/networking/stmmac Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ks8851_mll uses mii interfacesRandy Dunlap2009-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Randy Dunlap <randy.dunlap@oracle.com> ks8851_mll uses mii interfaces so it needs to select MII. ks8851_mll.c:(.text+0xf95ac): undefined reference to `generic_mii_ioctl' ks8851_mll.c:(.text+0xf96a0): undefined reference to `mii_ethtool_gset' ks8851_mll.c:(.text+0xf96fa): undefined reference to `mii_ethtool_sset' ks8851_mll.c:(.text+0xf9754): undefined reference to `mii_link_ok' ks8851_mll.c:(.text+0xf97ae): undefined reference to `mii_nway_restart' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/fec_mpc52xx: Fix kernel panic on FEC errorJohn Bonesio2009-10-141-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The MDIO bus cannot be accessed at interrupt context, but on an FEC error, the fec_mpc52xx driver reset function also tries to reset the PHY. Since the error is detected at IRQ context, and the PHY functions try to sleep, the kernel ends up panicking. Resetting the PHY on an FEC error isn't even necessary. This patch solves the problem by removing the PHY reset entirely. Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: Fix OF platform drivers coldplug/hotplug when compiled as modulesAnton Vorontsov2009-10-149-3/+10
| | | | | | | | | | | | | | | | | | Some OF platform drivers are missing module device tables, so they won't load automatically on boot. This patch fixes the issue by adding proper MODULE_DEVICE_TABLE() macros to the drivers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | can: sja1000: fix bug using library functions for skb allocationKurt Van Dijck2009-10-271-2/+0
| | | | | | | | | | | | | | | | | | | | Commit 7b6856a0 "can: provide library functions for skb allocation" did not properly remove two lines of the SJA1000 driver resulting in a 'skb_over_panic' when calling skb_put, as reported by Kurt. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb3: Set the rxqKrishna Kumar2009-10-271-0/+1
| | | | | | | | | | | | | | | | | | Set the rxq# for LRO when processing the last fragment of a frame. This helps in fast txq selection for routing workloads. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sfc: Rename 'xfp' file and functions to reflect realityBen Hutchings2009-10-245-58/+58
| | | | | | | | | | | | | | | | | | | | The 'XFP' driver is really a driver for the QT2022C2 and QT2025C PHYs, covering both more and less than XFP. Rename its functions and constants to reflect reality and to reduce namespace pollution when sfc is a built-in driver. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sfc: Remove unused code for non-autoneg speed/duplex switchingBen Hutchings2009-10-241-69/+39
| | | | | | | | | | | | | | | | The only multi-speed PHY driver using this is 10Xpress, and it does not support non-autoneg operation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sfc: Merge efx_fc_resolve() into efx_mdio_get_pause()Ben Hutchings2009-10-242-15/+8
| | | | | | | | | | | | | | | | efx_fc_resolve() is specific to MDIO and is not used by any other function. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sfc: Move MTD probe after netdev registration and name allocationBen Hutchings2009-10-241-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | The MTD partition is named based on the netdev name, which is set to 'eth%d' before registration. Also, the MTD partition will currently be left registered if netdev registration fails. Fix both these problems by moving the MTD probe after netdev registration. Hold the RTNL to serialise this with the netdev notifier that calls efx_mtd_rename(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sfc: Remove unnecessary tests of efx->membaseBen Hutchings2009-10-241-8/+0
| | | | | | | | | | | | | | | | These cleanup functions will never be called if the MMIO region could not be mapped. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sfc: Remove incorrect assertion from efx_pci_remove_main()Ben Hutchings2009-10-241-2/+0
| | | | | | | | | | Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sfc: Merge falcon_probe_phy() into falcon_probe_port()Ben Hutchings2009-10-241-35/+25
| | | | | | | | | | | | | | | | | | MAC and PHY probing are bound up together, as evidenced by the initialisation of efx_nic::loopback_modes. Remove the current arbitrary separation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud