summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* mv643xx_eth: Check ETH_INT_CAUSE_STATE bitDale Farnsworth2007-09-292-2/+4
| | | | | | | | | | | | Commit 468d09f8946d40228c56de26fe4874b2f98067ed masked the "state" interrupt (bit 20 of the cause register). This results in Radstone's PPC7D repeatedly re-entering the interrupt routine, locking up the board. The following patch returns the required handling for this interrupt. Signed-off-by: Martyn Welch <martyn.welch@radstone.co.uk> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e1000: Add device IDs of blade version of the 82571 quad portAuke Kok2007-09-274-0/+5
| | | | | | | | This blade-specific board form factor is identical to the 82571EB board. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sky2: fix transmit state on resumeStephen Hemminger2007-09-271-1/+16
| | | | | | | | | | | | | | This should fix http://bugzilla.kernel.org/show_bug.cgi?id=8667 After resume, driver has reset the chip so the current state of transmit checksum offload state machine and DMA state machine will be undefined. The fix is to set the state so that first Tx will set MSS and offset values. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sky2: FE+ vlan workaroundStephen Hemminger2007-09-271-2/+6
| | | | | | | | | The FE+ workaround means the driver can no longer trust the status register to indicate VLAN tagged frames. The fix for this is to just disable VLAN acceleration for that chip version. Tested and works fine. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sky2: sky2 FE+ receive status workaroundStephen Hemminger2007-09-271-11/+17
| | | | | | | | | | | | | | The Yukon FE+ chip appears to have a hardware glitch that causes bogus receive status values to be posted. The data in the packet is good, but the status value is random garbage. As a temporary workaround until the problem is better understood, implement the workaround the vendor driver used of ignoring the status value on this chip. Since this means trusting dodgy hardware values; add additional checking of the receive packet length. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* mv643xx_eth: duplicate methods in initializerAl Viro2007-09-261-2/+0
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'master' of ↵Linus Torvalds2007-09-261-8/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [PPP_MPPE]: Don't put InterimKey on the stack SCTP : Add paramters validity check for ASCONF chunk SCTP: Discard OOTB packetes with bundled INIT early. SCTP: Clean up OOTB handling and fix infinite loop processing SCTP: Explicitely discard OOTB chunks SCTP: Send ABORT chunk with correct tag in response to INIT ACK SCTP: Validate buffer room when processing sequential chunks [PATCH] mac80211: fix initialisation when built-in [PATCH] net/mac80211/wme.c: fix sparse warning [PATCH] cfg80211: fix initialisation if built-in [PATCH] net/wireless/sysfs.c: Shut up build warning
| * [PPP_MPPE]: Don't put InterimKey on the stackMichal Schmidt2007-09-251-8/+6
| | | | | | | | | | Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'r8169-for-jeff-20070919' of ↵Jeff Garzik2007-09-251-1/+13
|\ \ | | | | | | | | | git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into tmp
| * | r8169: workaround against ignored TxPoll writes (8168)Francois Romieu2007-09-191-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 8168 ignores the requests to fetch the Tx descriptors when the relevant TxPoll bit is already set. It easily kills the performances of the 8168. David Gundersen has noticed that it is enough to wait for the completion of the DMA transfer (NPQ bit is cleared) before writing the TxPoll register again. The extra IO traffic added by the proposed workaround could be minimalized but it is not a high-priority task. Fix for: http://bugzilla.kernel.org/show_bug.cgi?id=7924 http://bugzilla.kernel.org/show_bug.cgi?id=8688 (http://bugzilla.kernel.org/show_bug.cgi?id=7555 ?) Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: David Gundersen <gundy@iinet.net.au> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
| * | r8169: correct phy parameters for the 8110SCEdward Hsu2007-09-191-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The phys of the 8110SC (RTL_GIGA_MAC_VER_{05/06}) act abnormally in gigabit mode if they are applied the parameters in rtl8169_hw_phy_config which actually aim the 8110S/SB. It is ok to return early from rtl8169_hw_phy_config as it does not apply to the 8101 and 8168 families. Signed-off-by: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
* | | Revert "drivers/net/pcmcia/3c589_cs: fix port configuration switcheroo"Jeff Garzik2007-09-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit fadacb1b80e35e0b36a90d43e21ef91eec4b889b. The change being reverted made the driver consistent with include/linux/netdevice.h, but then inconsistent with the other PCMCIA ethernet drivers. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | sky2: be more selective about FIFO watchdogStephen Hemminger2007-09-252-14/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | Be more selective about when to enable the ram buffer watchdog code. It is unnecessary on XL A3 or later revs, and with Yukon FE the buffer is so small (4K) that the watchdog detects false positives. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | sky2: FE+ Phy initializationStephen Hemminger2007-09-251-0/+10
| |/ |/| | | | | | | | | | | | | | | | | One more snippet of PHY initialization required for FE+ chips. Discovered in latest sk98lin 10.21.1.3 driver. Please apply to 2.6.23. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | Merge branch 'master' of ↵Linus Torvalds2007-09-203-70/+58
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BNX2]: Add PHY workaround for 5709 A1. [PPP] L2TP: Fix skb handling in pppol2tp_xmit [PPP] L2TP: Fix skb handling in pppol2tp_recv_core [PPP] L2TP: Disallow non-UDP datagram sockets [PPP] pppoe: Fix double-free on skb after transmit failure [PKT_SCHED]: Fix 'SFQ qdisc crashes with limit of 2 packets' [NETFILTER]: MAINTAINERS update [NETFILTER]: nfnetlink_log: fix sending of multipart messages
| * | [BNX2]: Add PHY workaround for 5709 A1.Michael Chan2007-09-201-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the DIS_EARLY_DAC PHY workaround for 5709 A1. Without it, link sometimes does not come up. Update version to 1.6.5. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [PPP] L2TP: Fix skb handling in pppol2tp_xmitHerbert Xu2007-09-201-40/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes pppol2tp_xmit call skb_cow_head so that we don't modify cloned skb data. It also gets rid of skb2 we only need to preserve the original skb for congestion notification, which is only applicable for ppp_async and ppp_sync. The other semantic change made here is the removal of socket accounting for data tranmitted out of pppol2tp_xmit. The original code leaked any existing socket skb accounting. We could fix this by dropping the original skb owner. However, this is undesirable as the packet has not physically left the host yet. In fact, all other tunnels in the kernel do not account skb's passing through to their own socket. In partciular, ESP over UDP does not do so and it is the closest tunnel type to PPPoL2TP. So this patch simply removes the socket accounting in pppol2tp_xmit. The accounting still applies to control packets of course. I've also added a reminder that the outgoing checksum here doesn't work. I suppose existing deployments don't actually enable checksums. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [PPP] L2TP: Fix skb handling in pppol2tp_recv_coreHerbert Xu2007-09-201-20/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function pppol2tp_recv_core doesn't handle non-linear packets properly. It also fails to check the remote offset field. This patch fixes these problems. It also removes an unnecessary check on the UDP header which has already been performed by the UDP layer. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [PPP] L2TP: Disallow non-UDP datagram socketsHerbert Xu2007-09-201-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | With the addition of UDP-Lite we need to refine the socket check so that only genuine UDP sockets are allowed through. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [PPP] pppoe: Fix double-free on skb after transmit failureHerbert Xu2007-09-201-2/+1
| |/ | | | | | | | | | | | | | | | | When I got rid of the second packet in __pppoe_xmit I created a double-free on the skb because of the goto abort on failure. This patch removes that. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sky2: version 1.18Stephen Hemminger2007-09-201-1/+1
| | | | | | | | | | | | | | Update version number Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | sky2: receive FIFO checkingStephen Hemminger2007-09-202-17/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A driver writer from another operating system hinted that the versions of Yukon 2 chip with rambuffer (EC and XL) have a hardware bug that if the FIFO ever gets completely full it will hang. Sounds like a classic ring full vs ring empty wrap around bug. As a workaround, use the existing watchdog timer to check for ring full lockup. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | sky2: fe+ chip supportStephen Hemminger2007-09-202-37/+117
| | | | | | | | | | | | | | | | | | | | | | | | Add support for newest Marvell chips. The Yukon FE plus chip is found in some not yet released laptops. Tested on hardware evaluation boards. This version of the patch is for 2.6.23. It supersedes the two previous patches that are sitting in netdev-2.6 (upstream branch). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | sky2: reorganize chip revision featuresStephen Hemminger2007-09-202-57/+90
| | | | | | | | | | | | | | | | | | | | This patch should cause no functional changes in driver behaviour. There are (too) many revisions of the Yukon 2 chip now. Instead of adding more conditionals based on chip revision; rerganize into a set of feature flags so adding new versions is less problematic. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | sky2: ethtool speed report bugStephen Hemminger2007-09-201-7/+0
| | | | | | | | | | | | | | | | On 100mbit versions, the driver always reports gigabit speed available. The correct modes are already computed, then overwritten. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | sky2: fix VLAN receive processing (resend)Stephen Hemminger2007-09-202-2/+14
| | | | | | | | | | | | | | | | | | | | | | The length check for truncated frames was not correctly handling the case where VLAN acceleration had already read the tag. Also, the Yukon EX has some features that use high bit of status as security tag. Signed-off-by: Pierre-Yves Ritschard <pyr@spootnik.org> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | phy: export phy_mii_ioctlDomen Puncer2007-09-201-0/+1
| | | | | | | | | | | | | | | | Export phy_mii_ioctl, so network drivers can use it when built as modules too. Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | myri10ge: Add support for PCI device id 9Brice Goglin2007-09-191-0/+3
|/ | | | | | | Add support for new Myri-10G boards with PCI device id 9. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'master' of ↵Linus Torvalds2007-09-162-78/+50
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [VLAN]: Fix net_device leak. [PPP] generic: Fix receive path data clobbering & non-linear handling [PPP] generic: Call skb_cow_head before scribbling over skb [NET] skbuff: Add skb_cow_head [BRIDGE]: Kill clone argument to br_flood_* [PPP] pppoe: Fill in header directly in __pppoe_xmit [PPP] pppoe: Fix data clobbering in __pppoe_xmit and return value [PPP] pppoe: Fix skb_unshare_check call position [SCTP]: Convert bind_addr_list locking to RCU [SCTP]: Add RCU synchronization around sctp_localaddr_list [PKT_SCHED]: sch_cbq.c: Shut up uninitialized variable warning [PKTGEN]: srcmac fix [IPV6]: Fix source address selection. [IPV4]: Just increment OutDatagrams once per a datagram. [IPV6]: Just increment OutDatagrams once per a datagram. [IPV6]: Fix unbalanced socket reference with MSG_CONFIRM. [NET_SCHED] protect action config/dump from irqs [NET]: Fix two issues wrt. SO_BINDTODEVICE.
| * [PPP] generic: Fix receive path data clobbering & non-linear handlingHerbert Xu2007-09-161-19/+25
| | | | | | | | | | | | | | | | | | | | This patch adds missing pskb_may_pull calls to deal with non-linear packets that may arrive from pppoe or pppol2tp. It also copies cloned packets before writing over them. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [PPP] generic: Call skb_cow_head before scribbling over skbHerbert Xu2007-09-161-11/+3
| | | | | | | | | | | | | | | | It's rude to write over data that other people are still using. So call skb_cow_head before PPP proceeds to modify the skb data. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NET] skbuff: Add skb_cow_headHerbert Xu2007-09-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | This patch adds an optimised version of skb_cow that avoids the copy if the header can be modified even if the rest of the payload is cloned. This can be used in encapsulating paths where we only need to modify the header. As it is, this can be used in PPPOE and bridging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [PPP] pppoe: Fill in header directly in __pppoe_xmitHerbert Xu2007-09-161-11/+9
| | | | | | | | | | | | | | | | | | | | | | This patch removes the hdr variable (which is copied into the skb) and instead sets the header directly in the skb. It also uses __skb_push instead of skb_push since we've just checked using skb_cow for enough head room. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [PPP] pppoe: Fix data clobbering in __pppoe_xmit and return valueHerbert Xu2007-09-161-37/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function __pppoe_xmit modifies the skb data and therefore it needs to copy and skb data if it's cloned. In fact, it currently allocates a new skb so that it can return 0 in case of error without freeing the original skb. This is totally wrong because returning zero is meant to indicate congestion whereupon pppoe is supposed to wake up the upper layer once the congestion subsides. This makes sense for ppp_async and ppp_sync but is out-of-place for pppoe. This patch makes it always return 1 and free the skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [PPP] pppoe: Fix skb_unshare_check call positionHerbert Xu2007-09-161-3/+3
| | | | | | | | | | | | | | | | The skb_unshare_check call needs to be made before pskb_may_pull, not after. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers/net/pcmcia/3c589_cs: fix port configuration switcherooJeff Garzik2007-09-151-1/+1
| | | | | | | | | | | | | | | | 10base2 and 10baseT were accidentally switched. Noticed by Andreas HÃŒbner, forwarded by Alan Cox. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | sk98lin: resurrect driverStephen Hemminger2007-09-1542-1/+41398
| | | | | | | | | | | | | | | | | | This reverts commit e1abecc48938fbe1966ea6e78267fc673fa59295. The driver works on some hardware that skge doesn't handle yet. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | ucc_geth: fix compilationAnton Vorontsov2007-09-151-1/+1
| | | | | | | | | | | | | | | | | | | | Currently qe_bd_t is used in the macro call -- dma_unmap_single, which is a no-op on PPC32, thus error is hidden today. Starting with 2.6.24, macro will be replaced by the empty static function, and erroneous use of qe_bd_t will trigger compilation error. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | mv643xx_eth: Fix tx_bytes stats calculationDale Farnsworth2007-09-151-1/+1
| | | | | | | | | | | | Reported by Corey Minyard <cminyard@mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | Merge branch 'fixes-jgarzik' of ↵Jeff Garzik2007-09-153-10/+22
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
| * | [PATCH] bcm43xx: Fix cancellation of work queue crashesLarry Finger2007-09-143-10/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A crash upon booting that is caused by bcm43xx has been reported [1] and found to be due to a work queue being reinitialized while work on that queue is still pending. This fix modifies the shutdown of work queues and prevents periodic work from being requeued during shutdown. With this patch, no more crashes on reboot were observed by the original reporter. I do not get that particular failure on my system; however, when running a large number of ifdown/ifup sequences, my system would kernel panic with the 'caps lock' light blinking at roughly a 1 Hz rate. In addition, there were infrequent failures in the firmware that resulted in 'IRQ READY TIMEOUT' errors. With this patch, no more of the first type of failure occur, and incidence of the second type is greatly reduced. [1] http://bugzilla.kernel.org/show_bug.cgi?id=8937 Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | spidernet: fix interrupt reason recognitionIshizaki Kou2007-09-131-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch solves a problem that the spidernet driver sometimes fails to handle IRQ. The problem happens because, - In Cell architecture, interrupts may arrive at an interrupt controller, even if they are masked by the setting on registers of devices. It happens when interrupt packets are sent just before the interrupts are masked. - spidernet interrupt handler compares interrupt reasons with interrupt masks, so when such interrupts occurs, spidernet interrupt handler returns IRQ_NONE. - When all of interrupt handler return IRQ_NONE, linux kernel disables the IRQ and it no longer delivers interrupts to the interrupt handlers. spidernet doesn't work after above sequence, because it can't receive interrupts. This patch changes spidernet interrupt handler that it compares interrupt reason with SPIDER_NET_INTX_MASK_VALUE. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | ehea: fix last_rx updateJan-Bernd Themann2007-09-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Update last_rx in registered device struct instead of in the dummy device. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | ehea: propagate physical port stateJan-Bernd Themann2007-09-132-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduces a module parameter to decide whether the physical port link state is propagated to the network stack or not. It makes sense not to take the physical port state into account on machines with more logical partitions that communicate with each other. This is always possible no matter what the physical port state is. Thus eHEA can be considered as a switch there. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | Fix a lock problem in generic phy codeHans-Jürgen Koch2007-09-132-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Lock debugging finds a problem in phy.c and phy_device.c, this patch fixes it. Tested on an AT91SAM9263-EK board, kernel 2.6.23-rc4. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | sky2: restore multicast list on resume and other opsStephen Hemminger2007-09-131-1/+8
| | | | | | | | | | | | | | | | | | | | | Need to restore multicast settings on resume and after 'ethtool -r'. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | atl1: disable broken 64-bit DMALuca Tettamanti2007-09-121-12/+7
| |/ |/| | | | | | | | | | | | | | | | | | | 64-bit DMA causes data corruption with atl1. We don't know why, and Atheros is working on it. For now, just use 32-bit DMA. This is a big hack that is probably wrong, but it stops the bleeding. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Acked-by: Chris Snook <csnook@redhat.com> Acked-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | [TG3]: Workaround MSI bug on 5714/5780.Michael Chan2007-09-111-2/+11
|/ | | | | | | | | | | | | | | | | | | | A hardware bug was revealed after a recent PCI MSI patch was made to always disable legacy INTX when enabling MSI. The 5714/5780 chips will not generate MSI when INTX is disabled, causing MSI failure messages to be reported, and another patch was made to workaround the problem by disabling MSI on ServerWorks HT1000 bridge chips commonly found with the 5714. We workaround this chip bug by enabling INTX after we enable MSI and after we resume from suspend. Update version to 3.81. This problem was discovered by David Miller. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2007-08-3113-159/+302
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: - cxgb3 engine microcode load cxgb3 - Fix dev->priv usage qeth: Drop ARP packages on HiperSockets interface with NOARP attribute. qeth: provide specific message for OSA-adapters exclusively used qeth: crash during reboot after failing online setting qeth: Announce tx checksumming for qeth devices in TSO/EDDP mode qeth: dont return the return values of void functions. qeth: enforce a rate limit for inbound scatter gather messages qeth: ungrouping a device must not be interruptible netxen: fix crashes during module unload netxen: Avoid firmware load in PCI probe PS3: fix the bug that 'ifconfig down' would hang IOC3: Program UART predividers.
| * - cxgb3 engine microcode loadDivy Le Ray2007-08-313-52/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Load the engine microcode when an interface is brought up, instead of of doing it when the module is loaded. Loosen up tight binding between the driver and the engine microcode version. There is no need for microcode update with T3A boards. Fix the file naming. Do a better job at logging the loading activity. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
OpenPOWER on IntegriCloud