summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* qlge: Change version to v1.00.00.25.00.00-01.Ron Mercer2010-07-051-1/+1
| | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Make adapter drop frame errors and pass up csum errors.Ron Mercer2010-07-051-2/+28
| | | | | | | | | Statistics are available and the driver doesn't need the actual frame. This TCP/UDP and IP headers checksum errors will still be passed to the driver. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix possible endian issue for rx UDP csum.Ron Mercer2010-07-051-2/+2
| | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Reduce print level in data path statements.Ron Mercer2010-07-051-3/+3
| | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Don't use firmware when forcing firmware dump.Ron Mercer2010-07-053-24/+1
| | | | | | | | In some cases the firmware may be dead. Instead we dump the firmware parameters and then restart it. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Restore promiscuous setting after reset.Ron Mercer2010-07-052-1/+7
| | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ni52: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-19/+18
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ns83820: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-22/+22
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mac89x0: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-23/+29
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* natsemi: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-29/+27
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ksz884x: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-24/+22
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* lance: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-24/+32
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hp100: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-25/+22
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* starfire: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-24/+23
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hamachi: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-26/+37
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cs89x0: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-30/+36
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* epic100: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-25/+22
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethoc: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-25/+22
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* fealnx: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-32/+36
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* davinci_emac: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-19/+19
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ioc3-eth: Use the instance of net_device_stats from net_device.Ralf Baechle2010-07-051-24/+25
| | | | | | | | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Based on original patch by Kulikov Vasiliy. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> drivers/net/ioc3-eth.c | 49 ++++++++++++++++++++++++----------------------- 1 files changed, 25 insertions(+), 24 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
* sun3_82586: Use the instance of net_device_stats from net_device.Kulikov Vasiliy2010-07-051-18/+17
| | | | | | | | Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ks8842: Replace usage of dev_dbg with netdev_dbgRichard Röjfors2010-07-051-24/+18
| | | | | | | | | | This patch replaces all usage of dev_dbg with netdev_dbg. A side effect is that the pointer to the platform device in the adapter struct can be removed. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* usbnet: remove direct access to urb->statusOliver Neukum2010-07-052-9/+12
| | | | | | | | | USB drivers should not use urb->status directly because it is scheduled to become a parameter. This does the conversion for drivers/net/usb Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: use netif_<level> instead of netdev_<level>Emil Tantilov2010-07-057-86/+89
| | | | | | | | | | | | | This patch restores the ability to set msglvl through ethtool. The issue was introduced by: commit 849c45423c0c108e08d67644728cc9b0ed225fa1 CC: Joe Perches <joe@perches.com> Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb: drop support for UDP hashing w/ RSSAlexander Duyck2010-07-051-8/+10
| | | | | | | | | | | This change removes UDP from the supported protocols for RSS hashing. The reason for removing this protocol is because IP fragmentation was causing a network flow to be broken into two streams, one for fragmented, and one for non-fragmented and this in turn was causing out-of-order issues. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Update version to 2.0.16.Michael Chan2010-07-041-2/+2
| | | | | Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Dump some config space registers during TX timeout.Michael Chan2010-07-041-3/+8
| | | | | | | | These config register values will be useful when the memory registers are returning 0xffffffff which has been reported. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Add support for skb->rxhash.Michael Chan2010-07-042-1/+17
| | | | | | | | Add skb->rxhash support for TCP packets only because the bnx2 RSS hash does not hash UDP ports. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Always enable MSI-X on 5709.Michael Chan2010-07-041-1/+1
| | | | | | | | | Minor change to use MSI-X even if there is only one CPU. This allows the CNIC driver to always have a dedicated MSI-X vector to handle iSCSI events, instead of sharing the MSI vector. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: use NETIF_F_LROStanislaw Gruszka2010-07-011-1/+1
| | | | | | | | | | Both ETH_FLAG_LRO and NETIF_F_LRO have the same value, but NETIF_F_LRO is intended to use with netdev->features. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb: Add commentGreg Rose2010-07-011-0/+4
| | | | | | | | | | Add explanatory comment to avoid confusion when a pointer is set to the second word of an array instead of the customary cast of a pointer to the beginning of the array. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb: correct link test not being run when link is downAlexander Duyck2010-07-011-5/+3
| | | | | | | | | | | | | The igb online link test was always reporting pass because instead of checking for if_running it was checking for netif_carrier_ok. This change corrects the test so that it is run if the interface is running instead of checking for netif carrier ok. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb: Fix Tx hangs seen when loading igb with max_vfs > 7.Emil Tantilov2010-07-011-4/+1
| | | | | | | | | | | | Check the value of max_vfs at the time of assignment of vfs_allocated_count. The previous check in igb_probe_vfs was too late as by that time the rx/tx rings were initialized with the wrong offset. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb: Use only a single Tx queue in SR-IOV modeGreg Rose2010-07-011-4/+4
| | | | | | | | | | | | | | | | | The 82576 expects the second rx queue in any pool to receive L2 switch loop back packets sent from the second tx queue in another pool. The 82576 VF driver does not enable the second rx queue so if the PF driver sends packets destined to a VF from its second tx queue then the VF driver will never see them. In SR-IOV mode limit the number of tx queues used by the PF driver to one. This patch fixes a bug reported in which the PF cannot communciate with the VF and should be considered for 2.6.34 stable. CC: stable@kernel.org Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb: fix PHY config access on 82580Nick Nunley2010-07-012-0/+10
| | | | | | | | | | 82580 NICs can have up to 4 functions. This fixes phy accesses to use the correct locks for functions 2 and 3. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ll_temac: add error checking to DMA init pathDenis Kirjanov2010-07-011-2/+23
| | | | | | | Add error checking to DMA descriptor rings initialization code. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: changes to properly provide phy detailsAjit Khaparde2010-07-014-14/+104
| | | | | | | | be2net driver is currently not showing correct phy details in certain cases. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ehea: Allocate stats buffer with GFP_KERNELBrian King2010-07-011-1/+1
| | | | | | | | | | Since ehea_get_stats calls ehea_h_query_ehea_port, which can sleep, we can also sleep when allocating a page in this function. This fixes some memory allocation failure warnings seen under low memory conditions. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-07-0188-7584/+3392
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/libertas/host.h
| * ath9k_htc: Add LED support for AR7010Sujith2010-06-304-4/+56
| | | | | | | | | | Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: fix TSF after reset on AR913xFelix Fietkau2010-06-301-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When issuing a reset, the TSF value is lost in the hardware because of the 913x specific cold reset. As with some AR9280 cards, the TSF needs to be preserved in software here. Additionally, there's an issue that frequently prevents a successful TSF write directly after the chip reset. In this case, repeating the TSF write after the initval-writes usually works. This patch detects failed TSF writes and recovers from them, taking into account the delay caused by the initval writes. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Fix compile warning when debug disabledIvo van Doorn2010-06-301-2/+1
| | | | | | | | | | | | | | | | | | | | CC [M] drivers/net/wireless/rt2x00/rt2800lib.o drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_ampdu_action': drivers/net/wireless/rt2x00/rt2800lib.c:2821: warning: unused variable 'rt2x00dev' Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Always set BBP_CSR_CFG_BBP_RW_MODE to 1Ivo van Doorn2010-06-301-4/+2
| | | | | | | | | | | | | | | | | | Latest rt2870 legacy driver also sets BBP_CSR_CFG_BBP_RW_MODE to 1 when reading or writing the EEPROM. This means we can make the BBP reading and writing completely equal on all platforms. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Fix antenna initializationIvo van Doorn2010-06-301-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Legacy driver indicates that BBP1_TX_ANTENNA must be set to 0 for TXPATH values of 1 and 3. So the previous statement that nothing should be done for TXPATH = 3, is false. Furthermore, remove the false BBP3_RX_ANTENNA initialization when TXPATH is 1 for PCI and SOC devices. This field will always be overridden in the next switch statement, making this initialization bogus. History of this line indicates it was there from the beginning, and was once caught as typo. Instead of replacing the line with the correct line, the correct line was added... Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Fix IEEE80211_HT_CAP_RX_STBC assignmentIvo van Doorn2010-06-301-2/+5
| | | | | | | | | | | | | | | | | | | | | | IEEE80211_HT_CAP_RX_STBC is a 2 bit flag, and should thus never be set as normal flag. Instead we must read the number of RX paths from the EEPROM and set the IEEE80211_HT_CAP_RX_STBC with the correct value (using the same logic as the number of TX streams). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: fix beacon reset on rt2800Helmut Schaa2010-06-301-18/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an interface is removed the according beacon entry should be reset. The current approach to only clear the first word is not enough to stop the device from sending out the beacon, hence resulting in beacons being sent out for already removed interfaces. Fix this by invalidating the entire TXWI in front of the beacon instead of only the first word. Also clear all beacons during startup in the same way. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Disable link tuning in AP modeHelmut Schaa2010-06-301-4/+4
| | | | | | | | | | | | | | | | | | | | | | Since the link tuning is based on average RSSI values taken from all received frames it doesn't make sense to enable it in AP mode where every associated station provides independent RSSI values. Furthermore the legacy drivers don't enable link tuning in AP mode as well. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Fix beacon updates in rt61pciHelmut Schaa2010-06-301-0/+6
| | | | | | | | | | | | | | | | | | | | | | Fix rt61pci beacon updates in the same way as rt2800pci. rt61pci didn't update the beacon template after each beacon interval, resulting in the DTIM count being incorrect (if DTIM period > 1). Fix this by calling rt2x00lib_beacondone after the current beacon was sent out. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Fix beacon updates in rt2800pciHelmut Schaa2010-06-301-0/+6
| | | | | | | | | | | | | | | | | | | | rt2800pci didn't update the beacon template after each beacon interval, resulting in the DTIM count being incorrect (if DTIM period > 1). Fix this by calling rt2x00lib_beacondone after the current beacon was sent out. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud