summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* net: fec: Fix RGMII-ID modeMarkus Pargmann2015-04-301-1/+4
| | | | | | | | | | | RGMII-ID uses an internal delay within the transmitter or receiver. This feature is phy specific. The rest of the communication is normal RGMII. So the fec driver has to check for all RGMII modes, not only 'PHY_INTERFACE_MODE_RGMII'. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: Schedule napi when RX buffers allocation failsIdo Shamay2015-04-303-2/+26
| | | | | | | | | | | | | | | When system is out of memory, refilling of RX buffers fails while the driver continue to pass the received packets to the kernel stack. At some point, when all RX buffers deplete, driver may fall into a sleep, and not recover when memory for new RX buffers is once again availible. This is because hardware does not have valid descriptors, so no interrupt will be generated for the driver to return to work in napi context. Fix it by schedule the napi poll function from stats_task delayed workqueue, as long as the allocations fail. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen_nic: use spin_[un]lock_bh around tx_clean_lockTony Camuso2015-04-301-2/+2
| | | | | | | | | | | | | | While testing this driver with DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled did not produce any traces, it would be more prudent in the case of tx_clean_lock to use spin_[un]lock_bh, since this lock is manipulated in both the process and softirq contexts. This patch was tested for functionality and regressions with netperf and DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled. Signed-off-by: Tony Camuso <tcamuso@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Fix unaligned accessesDavid Ahern2015-04-301-4/+14
| | | | | | | | | | | | | | Addresses the following kernel logs seen during boot: Kernel unaligned access at TPC[100ee150] mlx4_QUERY_HCA+0x80/0x248 [mlx4_core] Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core] Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core] Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core] Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core] Signed-off-by: David Ahern <david.ahern@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Use correct loop cursor in error path.Benjamin Poirier2015-04-301-1/+1
| | | | | | | Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Fixes: 9e311e7 ("net/mlx4_en: Use affinity hint") Acked-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Fix MC1 memory offset calculationHariprasad Shenai2015-04-291-1/+1
| | | | | | | | | | | | Commit 6559a7e8296002b4 ("cxgb4: Cleanup macros so they follow the same style and look consistent") introduced a regression where reading MC1 memory in adapters where MC0 isn't present or MC0 size is not equal to MC1 size caused the adapter to crash due to incorrect computation of memoffset. Fix is to read the size of MC0 instead of MC1 for offset calculation Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Delay during kdump loadYuval Mintz2015-04-291-0/+6
| | | | | | | | | | | | | | | | | | | In a kdump environment interfaces might be re-loaded without a proper unload sequence in the previous running kernel. bnx2x management FW and driver maintains a `pulse' that notifies the FW that the driver is still up and running. Driver load on the kdump kernel should be performed only after the pulse has been out-of-sync long enough for the management FW to identify that the driver has crashed, on which point it will perform some necessary cleanup of the HW. In today's distros kdump loading is quite fast, sometimes too fast for our FW to get out-of-sync. This patch delays the bnx2x's probe during kdump to allow a proper re-load on the kdump kernel. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix Kernel Panic in bonding driver debugfs file: rlb_hash_tablePai2015-04-291-0/+10
| | | | | | | | | | | | | | | | | | This patch fixes a Kernel Panic in bonding driver debugfs file: rlb_hash_table. $> modprobe bonding mode=6 $> cat /sys/kernel/debug/bonding/bond0/rlb_hash_table This will crash the kernel. The struct alb_bond_info is initialized only when the bonding interface is initialized (ip link set bond0 up) and not at the time it is allocated. If we try to read the table before that, it'll result in a kernel panic. The patch applies against both net and net-next Signed-off-by: Vishwanath Pai <vpai@akamai.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macb: Fix race condition in driver when Rx frame is droppedPunnaiah Choudary Kalluri2015-04-291-0/+3
| | | | | | | | | | | | Under heavy Rx load, observed that the Hw is updating the USED bit and it is not updating the received frame status to the BD control field. This could be lack of resources for processing the BDs at high data rates. Driver drops the frame associated with this BD but not clearing the USED bit. So, this is causing hang condition as Hw expects USED bit to be cleared for this BD. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Fix a bug in netvsc_start_xmit()KY Srinivasan2015-04-293-26/+7
| | | | | | | | | | | | | | | | | | | | Commit b08cc79155fc26d0d112b1470d1ece5034651a4b eliminated memory allocation in the packet send path: "hv_netvsc: Eliminate memory allocation in the packet send path The network protocol used to communicate with the host is the remote ndis (rndis) protocol. We need to decorate each outgoing packet with a rndis header and additional rndis state (rndis per-packet state). To manage this state, we currently allocate memory in the transmit path. Eliminate this allocation by requesting additional head room in the skb." This commit introduced a bug since it did not account for the case if the skb was cloned. Fix this bug. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Tested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* altera_tse: Correct rx packet lengthVlastimil Setka2015-04-291-0/+6
| | | | | | | | | | Altera TSE MAC rx DMA transfer starts with the 2 additional bytes for IP payload alignment. This patch fixes tse_rx() function loop which reads DMA rx status and extracts packet length from it. Status signalises a whole DMA transfer length, which is 2 bytes longer than the packet itself. Signed-off-by: Vlastimil Setka <setka@vsis.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4: Fix tx ring affinity_mask creationBenjamin Poirier2015-04-291-3/+5
| | | | | | | | | | | | | By default, the number of tx queues is limited by the number of online cpus in mlx4_en_get_profile(). However, this limit no longer holds after the ethtool .set_channels method has been called. In that situation, the driver may access invalid bits of certain cpumask variables when queue_index >= nr_cpu_ids. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Acked-by: Ido Shamay <idos@mellanox.com> Fixes: d03a68f ("net/mlx4_en: Configure the XPS queue mapping on driver load") Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge/nl: remove wrong use of NLM_F_MULTINicolas Dichtel2015-04-294-9/+12
| | | | | | | | | | | | | | | | | | | | | | NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact, it is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: e5a55a898720 ("net: create generic bridge ops") Fixes: 815cccbf10b2 ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") CC: John Fastabend <john.r.fastabend@intel.com> CC: Sathya Perla <sathya.perla@emulex.com> CC: Subbu Seetharaman <subbu.seetharaman@emulex.com> CC: Ajit Khaparde <ajit.khaparde@emulex.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: intel-wired-lan@lists.osuosl.org CC: Jiri Pirko <jiri@resnulli.us> CC: Scott Feldman <sfeldma@gmail.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: bridge@lists.linux-foundation.org Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* trivial: net: systemport: bcmsysport.h: fix 0x0x prefixAntonio Ospite2015-04-291-1/+1
| | | | | | | | | | | Fix the 0x0x prefix in an integer constant. In this case, while at it, also fix a typo (s/unitcast/unicast/). Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* trivial: net: atl1e: atl1e_hw.h: fix 0x0x prefixAntonio Ospite2015-04-291-1/+1
| | | | | | | | | | Fix the 0x0x prefix in an integer constant. Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <chris.snook@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: remove {TPA,GRO}_ENABLE_FLAGMichal Schmidt2015-04-293-31/+15
| | | | | | | | | These flags are redundant with dev->features. Remove them. Just make sure to set dev->features ourselves in bnx2x_set_features() before performing the reload of the card. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: merge fp->disable_tpa with fp->modeMichal Schmidt2015-04-295-18/+18
| | | | | | | It is simpler to have the TPA mode as one three-state variable. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: mark LRO as a fixed disabled feature if disable_tpa is setMichal Schmidt2015-04-292-5/+1
| | | | | | | | | | | | | | If disable_tpa is set, remove NETIF_F_LRO from hw_features, so ethtool sees it as "off [fixed]". Note that setting the NETIF_F_LRO bit in dev->features in the 'else' branch is not needed, because the bit was already set by bnx2x_init_dev(). Then the check for disable_tpa in in bnx2x_fix_features() becomes unnecessary. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: introduce netif-msg into netvsc moduleSimon Xiao2015-04-294-7/+31
| | | | | | | | | | | | | | | | | 1. Introduce netif-msg to netvsc to control debug logging output and keep msg_enable in netvsc_device_context so that it is kept persistently. 2. Only call dump_rndis_message() when NETIF_MSG_RX_ERR or above is specified in netvsc module debug param. In non-debug mode, in current code, dump_rndis_message() will not dump anything but it still initialize some local variables and process the switch logic which is unnecessary, especially in high network throughput situation. Signed-off-by: Simon Xiao <sixiao@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: netcp: remove call to netif_carrier_(on/off) for MAC to Phy interfaceKaricheri, Muralidharan2015-04-271-2/+6
| | | | | | | | | Currently when interface type is MAC to Phy, netif_carrier_(on/off) is called which is not needed as Phy lib already updates the carrier status to net stack. This is needed only for other interface types Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2015-04-2724-160/+208
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) mlx4 doesn't check fully for supported valid RSS hash function, fix from Amir Vadai 2) Off by one in ibmveth_change_mtu(), from David Gibson 3) Prevent altera chip from reporting false error interrupts in some circumstances, from Chee Nouk Phoon 4) Get rid of that stupid endless loop trying to allocate a FIN packet in TCP, and in the process kill deadlocks. From Eric Dumazet 5) Fix get_rps_cpus() crash due to wrong invalid-cpu value, also from Eric Dumazet 6) Fix two bugs in async rhashtable resizing, from Thomas Graf 7) Fix topology server listener socket namespace bug in TIPC, from Ying Xue 8) Add some missing HAS_DMA kconfig dependencies, from Geert Uytterhoeven 9) bgmac driver intends to force re-polling but does so by returning the wrong value from it's ->poll() handler. Fix from Rafał Miłecki 10) When the creater of an rhashtable configures a max size for it, don't bark in the logs and drop insertions when that is exceeded. Fix from Johannes Berg 11) Recover from out of order packets in ppp mppe properly, from Sylvain Rochet * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) bnx2x: really disable TPA if 'disable_tpa' option is set net:treewide: Fix typo in drivers/net net/mlx4_en: Prevent setting invalid RSS hash function mdio-mux-gpio: use new gpiod_get_array and gpiod_put_array functions netfilter; Add some missing default cases to switch statements in nft_reject. ppp: mppe: discard late packet in stateless mode ppp: mppe: sanity error path rework net/bonding: Make DRV macros private net: rfs: fix crash in get_rps_cpus() altera tse: add support for fixed-links. pxa168: fix double deallocation of managed resources net: fix crash in build_skb() net: eth: altera: Resolve false errors from MSGDMA to TSE ehea: Fix memory hook reference counting crashes net/tg3: Release IRQs on permanent error net: mdio-gpio: support access that may sleep inet: fix possible panic in reqsk_queue_unlink() rhashtable: don't attempt to grow when at max_size bgmac: fix requests for extra polling calls from NAPI tcp: avoid looping in tcp_send_fin() ...
| * bnx2x: really disable TPA if 'disable_tpa' option is setMichal Schmidt2015-04-271-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bnx2x's 'disable_tpa=1' module option is not respected properly and TPA (transparent packet aggregation) remains enabled. Even though the module option causes LRO to be disabled, TPA is enabled in GRO mode. Additionally, disabling GRO via ethtool then has no effect. One can still observe tpa_* statistics increase and large packets being received in tcpdump. The bug was an unintended consequence of commit aebf6244cd39 "bnx2x: Be more forgiving toward SW GRO". Fix it by following the bp->disable_tpa flag when initializing fp's. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net:treewide: Fix typo in drivers/netMasanari Iida2015-04-272-2/+2
| | | | | | | | | | | | | | This patch fix spelling typo in printk. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/mlx4_en: Prevent setting invalid RSS hash functionAmir Vadai2015-04-271-13/+16
| | | | | | | | | | | | | | | | | | | | | | | | mlx4_en_check_rxfh_func() was checking for hardware support before setting a known RSS hash function, but didn't do any check before setting unknown RSS hash function. Need to make it fail on such values. In this occasion, moved the actual setting of the new value from the check function into mlx4_en_set_rxfh(). Fixes: 947cbb0 ("net/mlx4_en: Support for configurable RSS hash function") Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * mdio-mux-gpio: use new gpiod_get_array and gpiod_put_array functionsRojhalat Ibrahim2015-04-271-43/+17
| | | | | | | | | | | | | | | | | | | | | | Use the new gpiod_get_array and gpiod_put_array functions (added to mainline in the v4.1 merge window) for obtaining and disposing of GPIO descriptors. Cc: David Miller <davem@davemloft.net> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ppp: mppe: discard late packet in stateless modeSylvain Rochet2015-04-261-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When PPP is used over a link which does not guarantee packet ordering, we might get late MPPE packets. This is a problem because MPPE must be kept synchronized and the current implementation does not drop them and rekey 4095 times instead of 0, which is wrong. In order to prevent rekeying about a whole count space times (~ 4095 times), drop packets which are not within the forward 4096/2 window and increase sanity error counter. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ppp: mppe: sanity error path reworkSylvain Rochet2015-04-261-16/+13
| | | | | | | | | | | | | | | | We are going to need sanity error path a little further, rework to be able to use the sanity error path anywhere in decompressor. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/bonding: Make DRV macros privateMatan Barak2015-04-263-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bonding modules currently defines four macros with general names that pollute the global namespace: DRV_VERSION DRV_RELDATE DRV_NAME DRV_DESCRIPTION Fixing that by defining a private bonding_priv.h header files which includes those defines. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * altera tse: add support for fixed-links.Andreas Oetken2015-04-261-8/+29
| | | | | | | | | | | | | | | | | | Add support for fixed-links in configurations without PHY. (e.g. connection to a switch, SGMII point to point, SFPs) Check: Documentation/devicetree/bindings/net/fixed-link.txt. Signed-off-by: Andreas Oetken <ennoerlangen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * pxa168: fix double deallocation of managed resourcesAlexey Khoroshilov2015-04-261-11/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 43d3ddf87a57 ("net: pxa168_eth: add device tree support") starts to use managed resources by adding devm_clk_get() and devm_ioremap_resource(), but it leaves explicit iounmap() and clock_put() in pxa168_eth_remove() and in failure handling code of pxa168_eth_probe(). As a result double free can happen. The patch removes explicit resource deallocation. Also it converts clk_disable() to clk_disable_unprepare() to make it symmetrical with clk_prepare_enable(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: eth: altera: Resolve false errors from MSGDMA to TSEChee Nouk Phoon2015-04-251-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch resolves false errors from MSGDMA in TX mSGDMA MM to ST mode, and is a continuation of the patch recently submitted by Andrea Oetken. The MSGDMA had a logic bug that masked detection of this issue prior to Quartus 14.1/Build 164. When the MSGDMA logic bug was addressed in Quartus 14.1/Build 164, the driver problem was exposed. The problem is corrected by making sure MSGDMA_DESC_CTL_TR_ERR_IRQ is not set for any of the transmit DMA descriptors, and only used for receive descriptors. Fixes: 71cd26e altera tse: Error-Bit on tx-avalon-stream always set. Signed-off-by: Chee Nouk Phoon <cnphoon@altera.com> Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com>a Cc: Andreas Oetken <ennoerlangen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ehea: Fix memory hook reference counting crashesMichael Ellerman2015-04-251-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent commit to only register the EHEA memory hotplug hooks on adapter probe has a few problems. Firstly the reference counting is wrong for multiple adapters, in that the hooks are registered multiple times. Secondly the check in the tear down path is backward. Finally the error path doesn't decrement the count. The multiple registration of the hooks is the biggest problem, as it leads to oopses when the system is rebooted, and/or errors during memory hotplug, eg: $ ./mem-on-off-test.sh -r 2 ... ehea: memory is going offline ehea: LPAR memory changed - re-initializing driver ehea: re-initializing driver complete ehea: memory is going offline ehea: LPAR memory changed - re-initializing driver ehea: opcode=26c ret=fffffffffffffffc arg1=8000000003000003 arg2=0 arg3=700000060000d600 arg4=3fded0000 arg5=200 arg6=0 arg7=0 ehea: register_rpage_mr failed ehea: registering mr failed ehea: register MR failed - driver inoperable! ehea: memory is going offline Fixes: aa183323312d ("ehea: Register memory hotplug, reboot and crash hooks on adapter probe") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/tg3: Release IRQs on permanent errorGavin Shan2015-04-251-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When having permanent EEH error, the PCI device will be removed from the system. For this case, we shouldn't set pcierr_recovery to true wrongly, which blocks the driver to release the allocated interrupts and their handlers. Eventually, we can't disable MSI or MSIx successfully because of the MSI or MSIx interrupts still have associated interrupt actions, which is turned into following stack dump. Oops: Exception in kernel mode, sig: 5 [#1] : [c0000000003b76a8] .free_msi_irqs+0x80/0x1a0 (unreliable) [c00000000039f388] .pci_remove_bus_device+0x98/0x110 [c0000000000790f4] .pcibios_remove_pci_devices+0x9c/0x128 [c000000000077b98] .handle_eeh_events+0x2d8/0x4b0 [c0000000000782d0] .eeh_event_handler+0x130/0x1c0 [c000000000022bd4] .kernel_thread+0x54/0x70 Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mdio-gpio: support access that may sleepVivien Didelot2015-04-241-5/+9
| | | | | | | | | | | | | | | | | | | | | | Some systems using mdio-gpio may use gpio on message based busses, which require sleeping (e.g. gpio from an I2C I/O expander). Since this driver does not use IRQ handler, it is safe to use the _cansleep suffixed gpio accessors. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bgmac: fix requests for extra polling calls from NAPIRafał Miłecki2015-04-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | After d75b1ade567f ("net: less interrupt masking in NAPI") polling function has to return whole budget when it wants NAPI to call it again. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Felix Fietkau <nbd@openwrt.org> Fixes: eb64e2923a886 ("bgmac: leave interrupts disabled as long as there is work to do") Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ethernet: myri10ge: use arch_phys_wc_add()Luis R. Rodriguez2015-04-231-29/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver already uses ioremap_wc() on the same range so when write-combining is available that will be used instead. Cc: Hyong-Youb Kim <hykim@myri.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: netdev@vger.kernel.org Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * can: CAN_GRCAN should depend on HAS_DMAGeert Uytterhoeven2015-04-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | If NO_DMA=y: drivers/built-in.o: In function `grcan_free_dma_buffers': grcan.c:(.text+0x2d7716): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `grcan_allocate_dma_buffers': grcan.c:(.text+0x2d779c): undefined reference to `dma_alloc_coherent' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ethernet: arc: ARC_EMAC and EMAC_ROCKCHIP should depend on HAS_DMAGeert Uytterhoeven2015-04-231-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If NO_DMA=y: drivers/built-in.o: In function `arc_emac_tx_clean': emac_main.c:(.text+0x2decde): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `arc_emac_rx': emac_main.c:(.text+0x2dee1c): undefined reference to `dma_unmap_single' emac_main.c:(.text+0x2dee72): undefined reference to `dma_map_single' emac_main.c:(.text+0x2dee7e): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `arc_emac_probe': (.text+0x2df2ee): undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `arc_emac_open': emac_main.c:(.text+0x2df6d8): undefined reference to `dma_map_single' emac_main.c:(.text+0x2df6e4): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `arc_emac_tx': emac_main.c:(.text+0x2df9e4): undefined reference to `dma_map_single' emac_main.c:(.text+0x2df9f0): undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ethernet: amd: AMD_XGBE should depend on HAS_DMAGeert Uytterhoeven2015-04-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If NO_DMA=y: drivers/built-in.o: In function `xgbe_probe': xgbe-main.c:(.text+0x2def0a): undefined reference to `dma_set_mask' xgbe-main.c:(.text+0x2def20): undefined reference to `dma_supported' drivers/built-in.o: In function `xgbe_rx_poll': xgbe-drv.c:(.text+0x2e0320): undefined reference to `dma_sync_single_for_cpu' xgbe-drv.c:(.text+0x2e035e): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `xgbe_unmap_rdata': xgbe-desc.c:(.text+0x2e5fe4): undefined reference to `dma_unmap_page' xgbe-desc.c:(.text+0x2e5ffa): undefined reference to `dma_unmap_single' xgbe-desc.c:(.text+0x2e604a): undefined reference to `dma_unmap_page' xgbe-desc.c:(.text+0x2e6084): undefined reference to `dma_unmap_page' drivers/built-in.o: In function `xgbe_alloc_pages': xgbe-desc.c:(.text+0x2e6156): undefined reference to `dma_map_page' xgbe-desc.c:(.text+0x2e6164): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `xgbe_free_ring': xgbe-desc.c:(.text+0x2e63d4): undefined reference to `dma_unmap_page' xgbe-desc.c:(.text+0x2e640e): undefined reference to `dma_unmap_page' xgbe-desc.c:(.text+0x2e644a): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `xgbe_init_ring': xgbe-desc.c:(.text+0x2e64d4): undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `xgbe_map_tx_skb': xgbe-desc.c:(.text+0x2e6628): undefined reference to `dma_map_single' xgbe-desc.c:(.text+0x2e6638): undefined reference to `dma_mapping_error' xgbe-desc.c:(.text+0x2e66b2): undefined reference to `dma_map_single' xgbe-desc.c:(.text+0x2e66c2): undefined reference to `dma_mapping_error' xgbe-desc.c:(.text+0x2e6762): undefined reference to `dma_map_page' xgbe-desc.c:(.text+0x2e6772): undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ibmveth: Fix off-by-one error in ibmveth_change_mtu()David Gibson2015-04-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AFAIK the PAPR document which defines the virtual device interface used by the ibmveth driver doesn't specify a specific maximum MTU. So, in the ibmveth driver, the maximum allowed MTU is determined by the maximum allocated buffer size of 64k (corresponding to one page in the common case) minus the per-buffer overhead IBMVETH_BUFF_OH (which has value 22 for 14 bytes of ethernet header, plus 8 bytes for an opaque handle). This suggests a maximum allowable MTU of 65514 bytes, but in fact the driver only permits a maximum MTU of 65513. This is because there is a < instead of an <= in ibmveth_change_mtu(), which only permits an MTU which is strictly smaller than the buffer size, rather than allowing the buffer to be completely filled. This patch fixes the buglet. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * vxlan: remove the unnecessary codesLi RongQing2015-04-221-5/+1
| | | | | | | | | | | | | | The return value of vxlan_fdb_replace always is greater than or equal to 0 Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/macb: Factor out one-time assignment from loopBen Shelton2015-04-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | In 02c958dd3 (net/macb: add TX multiqueue support for gem), the initialization of tx_head and tx_tail in macb_init_rings() was moved inside the loop that iterates over each element in the ring. Since tx_head and tx_tail only need to be assigned once, move them back out of the loop. Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Prevent inner-reload while VFs existYuval Mintz2015-04-222-9/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some feature changes, driver employes an inner-reload flow where it resets the function and re-configures it with the new required set of parameters. Such a flow proves fatal to any VF since those were not intended to be used while HW is being reset underneath, causing them [at best] to lose all connectivity. This changes driver behavior to fail all configuration changes [e.g., mtu change] requested of the driver in case VFs are active. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'for-linus' of ↵Linus Torvalds2015-04-262-16/+7
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull fourth vfs update from Al Viro: "d_inode() annotations from David Howells (sat in for-next since before the beginning of merge window) + four assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() VFS: assorted d_backing_inode() annotations VFS: fs/inode.c helpers: d_inode() annotations VFS: fs/cachefiles: d_backing_inode() annotations VFS: fs library helpers: d_inode() annotations VFS: assorted weird filesystems: d_inode() annotations VFS: normal filesystems (and lustre): d_inode() annotations VFS: security/: d_inode() annotations VFS: security/: d_backing_inode() annotations VFS: net/: d_inode() annotations VFS: net/unix: d_backing_inode() annotations VFS: kernel/: d_inode() annotations VFS: audit: d_backing_inode() annotations VFS: Fix up some ->d_inode accesses in the chelsio driver VFS: Cachefiles should perform fs modifications on the top layer only VFS: AF_UNIX sockets should call mknod on the top layer only
| * | VFS: Fix up some ->d_inode accesses in the chelsio driverDavid Howells2015-04-152-16/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix up some ->d_inode accesses in the chelsio driver. (1) FILE_DATA() should just be replaced with file_inode(). (2) set_debugfs_file_size() should be removed and debugfs_create_file_size() should be used to create the file. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | Merge tag 'rdma-for-linus' of ↵Linus Torvalds2015-04-225-18/+68
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA updates from Roland Dreier: - IPoIB fixes from Doug Ledford and Erez Shitrit - iSER updates from Sagi Grimberg - mlx4 GUID handling changes from Yishai Hadas - other misc fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (51 commits) mlx5: wrong page mask if CONFIG_ARCH_DMA_ADDR_T_64BIT enabled for 32Bit architectures IB/iser: Rewrite bounce buffer code path IB/iser: Bump version to 1.6 IB/iser: Remove code duplication for a single DMA entry IB/iser: Pass struct iser_mem_reg to iser_fast_reg_mr and iser_reg_sig_mr IB/iser: Modify struct iser_mem_reg members IB/iser: Make fastreg pool cache friendly IB/iser: Move PI context alloc/free to routines IB/iser: Move fastreg descriptor pool get/put to helper functions IB/iser: Merge build page-vec into register page-vec IB/iser: Get rid of struct iser_rdma_regd IB/iser: Remove redundant assignments in iser_reg_page_vec IB/iser: Move memory reg/dereg routines to iser_memory.c IB/iser: Don't pass ib_device to fall_to_bounce_buff routine IB/iser: Remove a redundant struct iser_data_buf IB/iser: Remove redundant cmd_data_len calculation IB/iser: Fix wrong calculation of protection buffer length IB/iser: Handle fastreg/local_inv completion errors IB/iser: Fix unload during ep_poll wrong dereference ib_srpt: convert printk's to pr_* functions ...
| | |
| | \
| *-. \ Merge branches 'cve-fixup', 'ipoib', 'iser', 'misc-4.1', 'or-mlx4' and 'srp' ↵Doug Ledford2015-04-155-18/+68
| |\ \ \ | | | | | | | | | | | | | | | into for-4.1
| | | * | net/mlx4_core: Return the admin alias GUID upon host view requestYishai Hadas2015-04-151-14/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return the admin alias GUID value upon a GET request via HOST. We do this so that the GUID value requested by the admin is returned even if the SM has not yet approved this GUID (e.g. the SM is down). Note that this does not create a problem, since the virtual port will remain down until the SM does ACK the requested GUID value. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| | | * | net/mlx4_core: Raise slave shutdown event upon FLRYishai Hadas2015-04-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There might be cases that PF doesn't get a "reset" command upon slave down (e.g. virsh destroy). In these cases, however, an FLR event is issued. Therefore, when the PF receives an FLR event for a slave, it should also generate a shutdown event on the PF for that slave, to let the PF upper layers (mlx4_ib, eth) perform any required cleanup/actions associated with slave shutdown. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| | | * | net/mlx4_core: Set initial admin GUIDs for VFsYishai Hadas2015-04-152-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To have out of the box experience, the PF generates random GUIDs who serve as the initial admin values. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
OpenPOWER on IntegriCloud