summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2009-03-1626-217/+5671
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)" r8169: use hardware auto-padding. igb: remove ASPM L0s workaround netxen: remove old flash check. mv643xx_eth: fix unicast address filter corruption on mtu change xfrm: Fix xfrm_state_find() wrt. wildcard source address. emac: Fix clock control for 405EX and 405EXr chips ixgbe: fix multiple unicast address support via-velocity: Fix DMA mapping length errors on transmit. qlge: bugfix: Pad outbound frames smaller than 60 bytes. qlge: bugfix: Move netif_napi_del() to common call point. qlge: bugfix: Tell hw to strip vlan header. qlge: bugfix: Increase filter on inbound csum. dnet: replace obsolete *netif_rx_* functions with *napi_* net: Add be2net driver. dnet: Fix warnings on 64-bit. dnet: Dave DNET ethernet controller driver (updated) ipv6: Fix BUG when disabled ipv6 module is unloaded bnx2x: Using DMAE to initialize the chip bnx2x: Casting page alignment ...
| * r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)"françois romieu2009-03-151-112/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It fails on the following systems: - RTL8169sc/8110sc (XID 18000000) reported by Tim Durack <tdurack@gmail.com> (x86) - RTL8169sb/8110sb (XID 10000000) reported by Mikael Pettersson <mikpe@it.uu.se> (ARM) The patch appeared to work on x86 for the following systems: RTL8169sb/8110sb 10000000 PCI (EXT) RTL8110s 04000000 PCI (EXT) RTL8102e 24a00000 PCI-E (LOM) RTL8168c/8111c 3c2000c0 PCI-E (LOM) RTL8168b/8111b 38000000 PCI-E (LOM) RTL8168b/8111b 38000000 PCI-E (EXT) The patch exposes two problems: 1) while not completely wrong, mac addresses are not read correctly from the EEPROM 2) the MAC address registers are not correctly set Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
| * r8169: use hardware auto-padding.françois romieu2009-03-151-8/+0
| | | | | | | | | | | | | | | | It shortens the code and fixes the current pci_unmap leak with padded skb reported by Dave Jones. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * igb: remove ASPM L0s workaroundAlexander Duyck2009-03-141-24/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The L0s workaround should be moved into a pci quirk and so it is not necessary in the driver. This update removes the L0s workaround from the igb driver. This was the second half of the PCI quirk patch that Matthew Wilcox did not pick up when he picked up the quirk patch. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * netxen: remove old flash check.Dhananjay Phadke2009-03-143-26/+0
| | | | | | | | | | | | | | | | | | | | | | Remove flash size check which made sense only for ancient boards with 1MB flash. The check is based on values read from specific locations and fails with firmware size changes. This prevents driver from getting right mac addresses. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * mv643xx_eth: fix unicast address filter corruption on mtu changeLennert Buytenhek2009-03-131-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When mv643xx_eth_open() is called to up an interface, port_start() will first re-program the unicast address filter, and then re-initialise the PORT_CONFIG register, but that will disable unicast promiscuous mode if it was enabled by the unicast address filter setup. This isn't a problem on ifconfig up, as ->set_rx_mode() will be called shortly afterwards which will program the filters again, but it does trigger when changing the MTU, which calls mv643xx_eth_stop() and then mv643xx_eth_open() by hand to repopulate the receive rings with skbuffs of the new size. Swap the initialisation of the PORT_START register and the call to the unicast filter setup function to fix this. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * emac: Fix clock control for 405EX and 405EXr chipsBenjamin Herrenschmidt2009-03-131-0/+3
| | | | | | | | | | | | | | | | | | The EMAC variant in the 405EX and 405EXr chips needs the "440EP" type clock control workaround to avoid lockups of the Rx side during reset. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbe: fix multiple unicast address supportChris Leech2009-03-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Multiple unicast address support appears to have been broken with the change to support net_device_ops. This a regression from 2.6.28 to 2.6.29. I'm not 100% on whether ndo_set_multicast_list can be NULL after this or not. If ndo_set_rx_mode is set everything _should_ be using it. Signed-off-by: Chris Leech <christopher.leech@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * via-velocity: Fix DMA mapping length errors on transmit.Dave Jones2009-03-131-8/+7
| | | | | | | | | | | | | | | | | | | | | | From: Dave Jones <davej@redhat.com> The dma-debug changes caught that this driver uses the wrong DMA mapping length when skb_padto() does something. With suggestions from Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
| * qlge: bugfix: Pad outbound frames smaller than 60 bytes.Ron Mercer2009-03-131-0/+3
| | | | | | | | | | | | | | | | With some asic configurations xmit of frames smaller than 60 bytes may fail. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qlge: bugfix: Move netif_napi_del() to common call point.Ron Mercer2009-03-131-4/+6
| | | | | | | | | | | | | | | | Moving netif_napi_del() up the call chain so it will get called from all exit points. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qlge: bugfix: Tell hw to strip vlan header.Ron Mercer2009-03-131-3/+3
| | | | | | | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qlge: bugfix: Increase filter on inbound csum.Ron Mercer2009-03-132-12/+27
| | | | | | | | | | | | | | Chip does not do UDP checksum when fragmentation occurs. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * dnet: replace obsolete *netif_rx_* functions with *napi_*Ilya Yanok2009-03-131-4/+4
| | | | | | | | | | | | | | | | *netif_rx_* functions is obsolete and removed in newer kernels so we need to use corresponding *napi_* functions instead. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: Add be2net driver.Sathya Perla2009-03-1110-0/+4369
| | | | | | | | | | Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * dnet: Fix warnings on 64-bit.David S. Miller2009-03-111-5/+5
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * dnet: Dave DNET ethernet controller driver (updated)Ilya Yanok2009-03-114-0/+1231
| | | | | | | | | | | | | | | | | | Driver for Dave DNET ethernet controller found on Dave/DENX QongEVB-LITE FPGA. Heavily based on Dave sources, I've just adopted it to current kernel version and done some code cleanup. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Using DMAE to initialize the chipEilon Greenstein2009-03-102-13/+9
| | | | | | | | | | | | | | | | | | | | There was a bug, which occasionally caused failure in PRAM initialization after the cold boot. Also incremented version number to 1.45.27. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Casting page alignmentEilon Greenstein2009-03-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Adding a proper cast to the argument of PAGE_ALIGN macro so that the output won't depend on its original type. Without this cast aligned value will be truncated to the size of the argument type. Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Tested-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Adding restriction on sge_buf_sizeEilon Greenstein2009-03-101-1/+2
| | | | | | | | | | | | | | | | | | | | sge_buff_size may not be more than 0xffff. Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Tested-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2009-03-121-2/+0
|\ \ | |/ |/| | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sunhme: Fix qfe parent detection. sparc64: Fix lost interrupts on sun4u. sparc64: wait_event_interruptible_timeout may return -ERESTARTSYS jsflash: stop defining MAJOR_NR
| * sunhme: Fix qfe parent detection.Friedrich Oslage2009-03-081-2/+0
| | | | | | | | | | Signed-off-by: Friedrich Oslage <bluebird@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | p54: fix race condition in memory managementChristian Lamparter2009-03-061-3/+6
| | | | | | | | | | | | | | | | This patch fixes a number of race conditions in the driver. Up until now, "entry" pointer was initialized before acquiring the right lock. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | iwlwifi: fix error flow in iwl*_pci_probeReinette Chatre2009-03-052-12/+11
| | | | | | | | | | | | | | | | | | Both the agn and 3945 drivers has some problems with dealing with errors in their probe functions. Ensure that a goto will undo only things that was done before the goto was called. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00 : more devices to rt73usb.cXose Vazquez Perez2009-03-051-1/+31
| | | | | | | | | | | | | | | | | | add more usb_dev to rt73usb.c . IDs 'stolen' from the windows inf file(10/21/2008, 1.03.02.0000) plus some from the Ralink linux driver(2009_0206_RT73_Linux_STA_Drv1.1.0.2.tar.bz2) Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00 : more devices to rt2500usb.cXose Vazquez Perez2009-03-051-0/+8
| | | | | | | | | | | | | | | | add more usb_dev to rt2500usb.c . IDs 'stolen' from the windows inf file(02/12/2009, 2.01.01.0015). Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | bonding: Fix device passed into ->ndo_neigh_setup().Patrick McHardy2009-03-051-1/+1
| | | | | | | | | | Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2009-03-042-6/+6
|\ \
| * \ Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-03-032-6/+6
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] fix lots of ARM __devexit sillyness [ARM] 5417/1: Set the correct cacheid for ARMv6 CPUs with ARMv7 style MMU [ARM] 5416/1: Use unused address in v6_early_abort [ARM] 5411/1: S3C64XX: Fix EINT unmask [ARM] at91: fix for Atmel AT91 powersaving [ARM] RiscPC: Fix etherh oops
| | * | [ARM] RiscPC: Fix etherh oopsRussell King2009-02-222-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 8390 driver was structured by Al Viro to allow the flexibility required by platforms. lib8390.c contains the core code which drivers explicitly include: - 8390.c includes lib8390.c to provide the standard ISA based driver. - etherh.c includes it with the accessors defined for RiscPC platforms, where it is addressed via the MMIO accessors with a device dependent register spacing. Other platform drivers do something similar. However, b9a9b4b caused the kernel to contain not only the etherh private build of lib8390 (included in etherh.c) but also lib8390.c itself, and referred the new net_device_ops methods to the ISA version. The result of this is is not pretty: Unable to handle kernel paging request at virtual address 12032030 pgd = c8330000 [12032030] *pgd=00000000 Internal error: Oops: 18331805 [#1] Modules linked in: ipv6 CPU: 0 Not tainted (2.6.29-rc3 #167) PC is at do_set_multicast_list+0xd0/0x190 LR is at bitrev32+0x28/0x34 pc : [<c017aab4>] lr : [<c0139120>] psr: a0000093 sp : c8321d9c ip : c8321d84 fp : c8321dbc r10: c80c6800 r9 : 00000000 r8 : c80c6b60 r7 : c80c6b80 r6 : cc80c800 r5 : c80c6800 r4 : 00000000 r3 : cc80c80c r2 : 00000004 r1 : 00000007 r0 : e0000000 Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user ... Fix up b9a9b4b by making etherh's net_device_ops refer to the internal lib8390 functions, and remove the build of the ISA 8390.c driver. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | tmspci: fix request_irq raceMeelis Roos2009-03-041-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, tmspci tokenring driver crashes on device initialization because it requests its irq before initializing corresponding data structures. Fix this by moving request_irq call to a safer place. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | tg3: Fix 5906 link problemsMatt Carlson2009-03-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6833c043f9fc03696fde623914c4a0277df2a0bc introduced the phy auto-powerdown capability. While the APD feature only works for 5761 and 5784 asic revisions, the (harmless portion of the) code was applied to all 5705 and newer devices. However, the 5906 phy departs from the usual design. This commit was interfering with the 5906's ability to negotiate link against some switches. This patch corrects the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | sungem: another error printed one too earlyRoel Kluin2009-03-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Another error was printed one too early. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net pcmcia: worklimit reaches -1Roel Kluin2009-03-042-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | with while (--worklimit >= 0); worklimit reaches -1 after the loop. In 3c589_cs.c this caused a warning not to be printed. In 3c574_cs.c contrastingly, el3_rx() treats worklimit differently: static int el3_rx(struct net_device *dev, int worklimit) { while (--worklimit >= 0) { ... } return worklimit; } el3_rx() is only called by function el3_interrupt(): twice: static irqreturn_t el3_interrupt(int irq, void *dev_id) { int work_budget = max_interrupt_work; while(...) { if (...) work_budget = el3_rx(dev, work_budget); if (...) work_budget = el3_rx(dev, work_budget); if (--work_budget < 0) { ... break; } } } The error path can occur 2 too early. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: more timeouts that reach -1Roel Kluin2009-03-043-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | with while (timeout-- > 0); timeout reaches -1 after the loop, so the tests below are off by one. also don't do an '< 0' test on an unsigned. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | dm9601: new vendor/product IDsPeter Korsgaard2009-03-031-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add vendor/product IDs for new no name dm9601 compatible usb ethernet adaptors. Reported-by: Eric Lauriault <eric@linux.ca> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | OMAP: enable smc911x support for LDP platformRussell King2009-03-021-0/+12
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch enables SMC911x support to work on the OMAP LDP board. Although the SMC911x driver will eventually be obsoleted, the smsc911x patches are rather invasive for the -rc kernels. Rather than risk destablising smsc911x, this simpler patch is preferred to allow the network interface to work. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | zaurus: add usb id for motomagx phonesDmitriy Taychenachev2009-03-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Motorola MOTOMAGX phones (Z6, E8, Zn5 so far) are providing combined ACM/BLAN USB configuration. Since it has Vendor Specific class, the corresponding drivers (cdc-acm, zaurus) can't find it just by interface info. This patch adds usb id so the zaurus driver can properly handle this combined device. Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | usbnet: make usbnet_get_link() fall back to ethtool_op_get_link()Bjørn Mork2009-03-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make usbnet_get_link() fall back to ethtool_op_get_link() instead of defaulting to 1. This makes usbnet_get_link return valid results without the need for a driver specific check_connect or mii ops as long as the driver calls netif_carrier_{on,off}() as appropriate. cdc_ether is an example of such a driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | veth: Fix carrier detectEric W. Biederman2009-03-011-40/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current implementation of carrier detect in veth is broken. It reports the link is down until both sides of the veth pair are administatively up and then forever after it reports link up. So fix veth so that it only reports link up when both interfaces of the pair are administratively up. Signed-off-by: Eric Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | cdc_ether: add usb id for Ericsson F3507gBjørn Mork2009-03-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Ericsson F3507g wireless broadband module provides a CDC Ethernet compliant interface, but identifies it as a "Mobile Direct Line" CDC subclass, thereby preventing the CDC Ethernet class driver from picking it up. This patch adds the device id to cdc_ether.c as a workaround. Ericsson has provided a "class" driver for this device: http://kerneltrap.org/mailarchive/linux-net/2008/10/28/3832094 But closer inspection of that driver reveals that it adds little more than duplication of code from cdc_ether.c. See also http://marc.info/?l=linux-usb&m=123334979706403&w=2 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r8169: read MAC address from EEPROM on init (2nd attempt)Ivan Vecera2009-03-011-2/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is 2nd attempt to implement the initialization/reading of MAC address from EEPROM. The first used PCI's VPD and there were some problems, some devices are not able to read EEPROM content by VPD. The 2nd one uses direct access to EEPROM through bit-banging interface and my testing results seem to be much better. I tested 5 systems each with different Realtek NICs and I didn't find any problem. AFAIK Francois's NICs also works fine. Original description: This fixes the problem when MAC address is set by ifconfig or by ip link commands and this address is stored in the device after reboot. The power-off is needed to get right MAC address. This is problem when Xen daemon is running because it renames the device name from ethX to pethX and sets its MAC address to FE:FF:FF:FF:FF:FF. After reboot the device is still using FE:FF:FF:FF:FF:FF. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2009-02-281-4/+4
|\ \ \
| * | | Fix iwlan DMA mapping directionFenghua Yu2009-02-251-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When iwlan runs on IOMMU, IOMMU generates a lot of PTE write faults because PTE write bit is not set on some of PTE's. This is because iwlan driver calls DMA mapping with PCI_DMA_TODEVICE which is read only in mapping PTE. But iwlan device actually writes to the mapped page to update its contents. This issue is not exposed in swiotlb. But VT-d hardware can capture this fault and stop the fault transaction. The following patch fixes the issue. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Bhavesh Davda <bhavesh@vmware.com> Tested-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge branch 'master' of ↵David S. Miller2009-02-287-70/+71
|\ \ \ \ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * | | | libertas: fix misuse of netdev_priv() and dev->ml_privKiran Divekar2009-02-267-70/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mesh and radiotap interfaces need to use the same private data as the main wifi interface. If the main wifi interface uses netdev_priv(), but the other interfaces ->ml_priv, there's no way to figure out where the private data actually is in the WEXT handlers and netdevice callbacks. So make everything use ->ml_priv. Fixes botched netdev_priv() conversion introduced by "netdevice libertas: Fix directly reference of netdev->priv", though admittedly libertas' use of ->priv was somewhat "special". Signed-off-by: Kiran Divekar <dkiran@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | | gianfar: Do right check on num_txbdfreeRini van Zetten2009-02-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a wrong check on num_txbdfree. It could lead to num_txbdfree become nagative. Result was that the gianfar stops sending data. Changes from first version : - removed a space between parens (David Millers comment) - full email address in signed off line Signed-off-by: Rini van Zetten <rini@arvoo.nl> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | b44: Disable device on shutdownMichael Buesch2009-02-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable the SSB core on device shutdown. This has two advantages: 1) A clean device shutdown is always desired here, because we disable the device's global crystal in the next statement. 2) This fixes a bug where the device will come up with the enable-bit set on the next initialization (without a reboot inbetween). This causes breakage on the second initialization due to code that checks this bit (ssb_device_is_enabled() checks). Reported-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | b44: Unconditionally enable interrupt routing on resetMichael Buesch2009-02-261-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unconditionally setup the IRQ routing on chip reset. It's safe to call ssb_pcicore_dev_irqvecs_enable() unconditionally, because it has internal checks for redundant calls. This fixes problems where hardware will not come up properly due to quirks in the enable-bit hardware. Reported-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | net: fix hp-plus build errorRandy Dunlap2009-02-261-1/+1
|/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hp-plus needs to call __alloc_eip_netdev() instead of __alloc_ei_netdev() since it is linked with 8390p.o. Fixes this build error: ERROR: "__alloc_ei_netdev" [drivers/net/hp-plus.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud