summaryrefslogtreecommitdiffstats
path: root/drivers/net/xen-netfront.c
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'for-linus-4.10-rc0-tag' of ↵Linus Torvalds2016-12-131-49/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Xen features and fixes for 4.10 These are some fixes, a move of some arm related headers to share them between arm and arm64 and a series introducing a helper to make code more readable. The most notable change is David stepping down as maintainer of the Xen hypervisor interface. This results in me sending you the pull requests for Xen related code from now on" * tag 'for-linus-4.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits) xen/balloon: Only mark a page as managed when it is released xenbus: fix deadlock on writes to /proc/xen/xenbus xen/scsifront: don't request a slot on the ring until request is ready xen/x86: Increase xen_e820_map to E820_X_MAX possible entries x86: Make E820_X_MAX unconditionally larger than E820MAX xen/pci: Bubble up error and fix description. xen: xenbus: set error code on failure xen: set error code on failures arm/xen: Use alloc_percpu rather than __alloc_percpu arm/arm64: xen: Move shared architecture headers to include/xen/arm xen/events: use xen_vcpu_id mapping for EVTCHNOP_status xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing xen-scsifront: Add a missing call to kfree MAINTAINERS: update XEN HYPERVISOR INTERFACE xenfs: Use proc_create_mount_point() to create /proc/xen xen-platform: use builtin_pci_driver xen-netback: fix error handling output xen: make use of xenbus_read_unsigned() in xenbus xen: make use of xenbus_read_unsigned() in xen-pciback xen: make use of xenbus_read_unsigned() in xen-fbfront ...
| * xen: make use of xenbus_read_unsigned() in xen-netfrontJuergen Gross2016-11-071-49/+18
| | | | | | | | | | | | | | | | | | | | | | | | Use xenbus_read_unsigned() instead of xenbus_scanf() when possible. This requires to change the type of some reads from int to unsigned, but these cases have been wrong before: negative values are not allowed for the modified cases. Cc: netdev@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: David Vrabel <david.vrabel@citrix.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-11-151-2/+2
|\ \ | | | | | | | | | | | | | | | | | | Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | xen-netfront: cast grant table reference first to type intDongli Zhang2016-11-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | IS_ERR_VALUE() in commit 87557efc27f6a50140fb20df06a917f368ce3c66 ("xen-netfront: do not cast grant table reference to signed short") would not return true for error code unless we cast ref first to type int. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | xen-netfront: do not cast grant table reference to signed shortDongli Zhang2016-10-311-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | While grant reference is of type uint32_t, xen-netfront erroneously casts it to signed short in BUG_ON(). This would lead to the xen domU panic during boot-up or migration when it is attached with lots of paravirtual devices. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: use core MTU range checking in virt driversJarod Wilson2016-10-201-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hyperv_net: - set min/max_mtu, per Haiyang, after rndis_filter_device_add virtio_net: - set min/max_mtu - remove virtnet_change_mtu vmxnet3: - set min/max_mtu xen-netback: - min_mtu = 0, max_mtu = 65517 xen-netfront: - min_mtu = 0, max_mtu = 65535 unisys/visor: - clean up defines a little to not clash with network core or add redundat definitions CC: netdev@vger.kernel.org CC: virtualization@lists.linux-foundation.org CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: "Michael S. Tsirkin" <mst@redhat.com> CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: Wei Liu <wei.liu2@citrix.com> CC: Paul Durrant <paul.durrant@citrix.com> CC: David Kershner <david.kershner@unisys.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netfront: avoid packet loss when ethernet header crosses page boundaryVitaly Kuznetsov2016-09-201-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Small packet loss is reported on complex multi host network configurations including tunnels, NAT, ... My investigation led me to the following check in netback which drops packets: if (unlikely(txreq.size < ETH_HLEN)) { netdev_err(queue->vif->dev, "Bad packet size: %d\n", txreq.size); xenvif_tx_err(queue, &txreq, extra_count, idx); break; } But this check itself is legitimate. SKBs consist of a linear part (which has to have the ethernet header) and (optionally) a number of frags. Netfront transmits the head of the linear part up to the page boundary as the first request and all the rest becomes frags so when we're reconstructing the SKB in netback we can't distinguish between original frags and the 'tail' of the linear part. The first SKB needs to be at least ETH_HLEN size. So in case we have an SKB with its linear part starting too close to the page boundary the packet is lost. I see two ways to fix the issue: - Change the 'wire' protocol between netfront and netback to start keeping the original SKB structure. We'll have to add a flag indicating the fact that the particular request is a part of the original linear part and not a frag. We'll need to know the length of the linear part to pre-allocate memory. - Avoid transmitting SKBs with linear parts starting too close to the page boundary. That seems preferable short-term and shouldn't bring significant performance degradation as such packets are rare. That's what this patch is trying to achieve with skb_copy(). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netfront: request Tx response events more oftenMalcolm Crossley2016-01-281-12/+3
| | | | | | | | | | | | Trying to batch Tx response events results in poor performance because this delays freeing the transmitted skbs. Instead use the standard RING_FINAL_CHECK_FOR_RESPONSES() macro to be notified once the next Tx response is placed on the ring. Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'for-linus-4.4-rc0-tag' of ↵Linus Torvalds2015-11-041-36/+86
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: - Improve balloon driver memory hotplug placement. - Use unpopulated hotplugged memory for foreign pages (if supported/enabled). - Support 64 KiB guest pages on arm64. - CPU hotplug support on arm/arm64. * tag 'for-linus-4.4-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (44 commits) xen: fix the check of e_pfn in xen_find_pfn_range x86/xen: add reschedule point when mapping foreign GFNs xen/arm: don't try to re-register vcpu_info on cpu_hotplug. xen, cpu_hotplug: call device_offline instead of cpu_down xen/arm: Enable cpu_hotplug.c xenbus: Support multiple grants ring with 64KB xen/grant-table: Add an helper to iterate over a specific number of grants xen/xenbus: Rename *RING_PAGE* to *RING_GRANT* xen/arm: correct comment in enlighten.c xen/gntdev: use types from linux/types.h in userspace headers xen/gntalloc: use types from linux/types.h in userspace headers xen/balloon: Use the correct sizeof when declaring frame_list xen/swiotlb: Add support for 64KB page granularity xen/swiotlb: Pass addresses rather than frame numbers to xen_arch_need_swiotlb arm/xen: Add support for 64KB page granularity xen/privcmd: Add support for Linux 64KB page granularity net/xen-netback: Make it running on 64KB page granularity net/xen-netfront: Make it running on 64KB page granularity block/xen-blkback: Make it running on 64KB page granularity block/xen-blkfront: Make it running on 64KB page granularity ...
| * net/xen-netfront: Make it running on 64KB page granularityJulien Grall2015-10-231-36/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PV network protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity using network device on a non-modified Xen. It's only necessary to adapt the ring size and break skb data in small chunk of 4KB. The rest of the code is relying on the grant table code. Note that we allocate a Linux page for each rx skb but only the first 4KB is used. We may improve the memory usage by extending the size of the rx skb. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-10-241-7/+7
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: net/ipv6/xfrm6_output.c net/openvswitch/flow_netlink.c net/openvswitch/vport-gre.c net/openvswitch/vport-vxlan.c net/openvswitch/vport.c net/openvswitch/vport.h The openvswitch conflicts were overlapping changes. One was the egress tunnel info fix in 'net' and the other was the vport ->send() op simplification in 'net-next'. The xfrm6_output.c conflicts was also a simplification overlapping a bug fix. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | xen-netfront: update num_queues to real createdJoe Jin2015-10-211-7/+7
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes xennet_create_queues() may failed to created all requested queues, we need to update num_queues to real created to avoid NULL pointer dereference. Signed-off-by: Joe Jin <joe.jin@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xen-netfront: always set num queues if possiblechas williams2015-09-201-7/+10
|/ | | | | | | | | | | If netfront connects with two (or more) queues and then reconnects with only one queue it fails to delete or rewrite the multi-queue-num-queues key and netback will try to use the wrong number of queues. Always write the num-queues field if the backend has multi-queue support. Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'for-linus-4.3-rc0b-tag' of ↵Linus Torvalds2015-09-101-5/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen terminology fixes from David Vrabel: "Use the correct GFN/BFN terms more consistently" * tag 'for-linus-4.3-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Rename the variable xen_store_mfn to xen_store_gfn xen/privcmd: Further s/MFN/GFN/ clean-up hvc/xen: Further s/MFN/GFN clean-up video/xen-fbfront: Further s/MFN/GFN clean-up xen/tmem: Use xen_page_to_gfn rather than pfn_to_gfn xen: Use correctly the Xen memory terminologies arm/xen: implement correctly pfn_to_mfn xen: Make clear that swiotlb and biomerge are dealing with DMA address
| * xen: Use correctly the Xen memory terminologiesJulien Grall2015-09-081-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on include/xen/mm.h [1], Linux is mistakenly using MFN when GFN is meant, I suspect this is because the first support for Xen was for PV. This resulted in some misimplementation of helpers on ARM and confused developers about the expected behavior. For instance, with pfn_to_mfn, we expect to get an MFN based on the name. Although, if we look at the implementation on x86, it's returning a GFN. For clarity and avoid new confusion, replace any reference to mfn with gfn in any helpers used by PV drivers. The x86 code will still keep some reference of pfn_to_mfn which may be used by all kind of guests No changes as been made in the hypercall field, even though they may be invalid, in order to keep the same as the defintion in xen repo. Note that page_to_mfn has been renamed to xen_page_to_gfn to avoid a name to close to the KVM function gfn_to_page. Take also the opportunity to simplify simple construction such as pfn_to_mfn(page_to_pfn(page)) into xen_page_to_gfn. More complex clean up will come in follow-up patches. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=e758ed14f390342513405dd766e874934573e6cb Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* | xen-netfront: respect user provided max_queuesWei Liu2015-09-101-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Originally that parameter was always reset to num_online_cpus during module initialisation, which renders it useless. The fix is to only set max_queues to num_online_cpus when user has not provided a value. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Tested-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/xen-netfront: only napi_synchronize() if runningChas Williams2015-08-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an interface isn't running napi_synchronize() will hang forever. [ 392.248403] rmmod R running task 0 359 343 0x00000000 [ 392.257671] ffff88003760fc88 ffff880037193b40 ffff880037193160 ffff88003760fc88 [ 392.267644] ffff880037610000 ffff88003760fcd8 0000000100014c22 ffffffff81f75c40 [ 392.277524] 0000000000bc7010 ffff88003760fca8 ffffffff81796927 ffffffff81f75c40 [ 392.287323] Call Trace: [ 392.291599] [<ffffffff81796927>] schedule+0x37/0x90 [ 392.298553] [<ffffffff8179985b>] schedule_timeout+0x14b/0x280 [ 392.306421] [<ffffffff810f91b9>] ? irq_free_descs+0x69/0x80 [ 392.314006] [<ffffffff811084d0>] ? internal_add_timer+0xb0/0xb0 [ 392.322125] [<ffffffff81109d07>] msleep+0x37/0x50 [ 392.329037] [<ffffffffa00ec79a>] xennet_disconnect_backend.isra.24+0xda/0x390 [xen_netfront] [ 392.339658] [<ffffffffa00ecadc>] xennet_remove+0x2c/0x80 [xen_netfront] [ 392.348516] [<ffffffff81481c69>] xenbus_dev_remove+0x59/0xc0 [ 392.356257] [<ffffffff814e7217>] __device_release_driver+0x87/0x120 [ 392.364645] [<ffffffff814e7cf8>] driver_detach+0xb8/0xc0 [ 392.371989] [<ffffffff814e6e69>] bus_remove_driver+0x59/0xe0 [ 392.379883] [<ffffffff814e84f0>] driver_unregister+0x30/0x70 [ 392.387495] [<ffffffff814814b2>] xenbus_unregister_driver+0x12/0x20 [ 392.395908] [<ffffffffa00ed89b>] netif_exit+0x10/0x775 [xen_netfront] [ 392.404877] [<ffffffff81124e08>] SyS_delete_module+0x1d8/0x230 [ 392.412804] [<ffffffff8179a8ee>] system_call_fastpath+0x12/0x71 Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/xen-netfront: only clean up queues if presentChas Williams2015-08-231-2/+3
|/ | | | | | | | If you simply load and unload the module without starting the interfaces, the queues are never created and you get a bad pointer dereference. Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2015-07-011-7/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) mlx4 driver bug fixes (TX queue wakeups, csum complete indications) from Ido Shamay, Eran Ben Elisha, and Or Gerlitz. 2) Missing unlock in error path of PTP support in renesas driver, from Dan Carpenter. 3) Add Vitesse 8641 phy IDs to vitesse PHY driver, from Shaohui Xie. 4) Bnx2x driver bug fixes (linearization of encap packets, scratchpad parity error notifications, flow-control and speed settings) from Yuval Mintz, Manish Chopra, Shahed Shaikh, and Ariel Elior. 5) ipv6 extension header parsing in the igb chip has a HW errata, disable it. Frm Todd Fujinaka. 6) Fix PCI link state locking issue in e1000e driver, from Yanir Lubetkin. 7) Cure panics during MTU change in i40e, from Mitch Williams. 8) Don't leak promisc refs in DSA slave driver, from Gilad Ben-Yossef. 9) Add missing HAS_DMA dep to VIA Rhine driver, from Geery Uytterhoeven. 10) Make sure DMA map/unmap calls are symmetric in bnx2x driver, from Michal Schmidt. 11) Workaround for MDIO access problems in bcm7xxx devices, from FLorian Fainelli. 12) Fix races in SCTP protocol between OTTB responses and route removals, from Alexander Sverdlin. 13) Fix jumbo frame checksum issue with some mvneta devices, from Simon Guinot. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (58 commits) sock_diag: don't broadcast kernel sockets net: mvneta: disable IP checksum with jumbo frames for Armada 370 ARM: mvebu: update Ethernet compatible string for Armada XP net: mvneta: introduce compatible string "marvell, armada-xp-neta" api: fix compatibility of linux/in.h with netinet/in.h net: icplus: fix typo in constant name sis900: Trivial: Fix typos in enums stmmac: Trivial: fix typo in constant name sctp: Fix race between OOTB responce and route removal net-Liquidio: Delete unnecessary checks before the function call "vfree" vmxnet3: Bump up driver version number amd-xgbe: Add the __GFP_NOWARN flag to Rx buffer allocation net: phy: mdio-bcm-unimac: workaround initial read failures for integrated PHYs net: bcmgenet: workaround initial read failures for integrated PHYs net: phy: bcm7xxx: workaround MDIO management controller initial read bnx2x: fix DMA API usage net: via: VIA_RHINE and VIA_VELOCITY should depend on HAS_DMA net/phy: tune get_phy_c45_ids to support more c45 phy bnx2x: fix lockdep splat net: fec: don't access RACC register when not available ...
| * xen-netfront: Remove the meaningless codeLi, Liang Z2015-06-281-7/+0
| | | | | | | | | | | | | | | | | | | | The function netif_set_real_num_tx_queues() will return -EINVAL if the second parameter < 1, so call this function with the second parameter set to 0 is meaningless. Signed-off-by: Liang Li <liang.z.li@intel.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'for-linus-4.2-rc0-tag' of ↵Linus Torvalds2015-07-011-1/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Xen features and cleanups for 4.2-rc0: - add "make xenconfig" to assist in generating configs for Xen guests - preparatory cleanups necessary for supporting 64 KiB pages in ARM guests - automatically use hvc0 as the default console in ARM guests" * tag 'for-linus-4.2-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: block/xen-blkback: s/nr_pages/nr_segs/ block/xen-blkfront: Remove invalid comment block/xen-blkfront: Remove unused macro MAXIMUM_OUTSTANDING_BLOCK_REQS arm/xen: Drop duplicate define mfn_to_virt xen/grant-table: Remove unused macro SPP xen/xenbus: client: Fix call of virt_to_mfn in xenbus_grant_ring xen: Include xen/page.h rather than asm/xen/page.h kconfig: add xenconfig defconfig helper kconfig: clarify kvmconfig is for kvm xen/pcifront: Remove usage of struct timeval xen/tmem: use BUILD_BUG_ON() in favor of BUG_ON() hvc_xen: avoid uninitialized variable warning xenbus: avoid uninitialized variable warning xen/arm: allow console=hvc0 to be omitted for guests arm,arm64/xen: move Xen initialization earlier arm/xen: Correctly check if the event channel interrupt is present
| * xen: Include xen/page.h rather than asm/xen/page.hJulien Grall2015-06-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using xen/page.h will be necessary later for using common xen page helpers. As xen/page.h already include asm/xen/page.h, always use the later. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: netdev@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* | net/xen-netfront: Correct printf format in xennet_get_responsesJulien Grall2015-06-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | rx->status is an int16_t, print it using %d rather than %u in order to have a meaningful value when the field is negative. Also use %u rather than %x for rx->offset. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-06-011-13/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/phy/amd-xgbe-phy.c drivers/net/wireless/iwlwifi/Kconfig include/net/mac80211.h iwlwifi/Kconfig and mac80211.h were both trivial overlapping changes. The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and the bug fix that happened on the 'net' side is already integrated into the rest of the amd-xgbe driver. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | xen-netfront: properly destroy queues when removing deviceDavid Vrabel2015-05-271-13/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | xennet_remove() freed the queues before freeing the netdevice which results in a use-after-free when free_netdev() tries to delete the napi instances that have already been freed. Fix this by fully destroy the queues (which includes deleting the napi instances) before freeing the netdevice. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xen-netfront: Use setup_timerVaishali Thakkar2015-05-311-3/+2
|/ | | | | | | | | | | | | | | | | | | | Use the timer API function setup_timer instead of structure field assignments to initialize a timer. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @change@ expression e, func, da; @@ -init_timer (&e); +setup_timer (&e, func, da); -e.data = da; -e.function = func; Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2015-04-171-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Fix verifier memory corruption and other bugs in BPF layer, from Alexei Starovoitov. 2) Add a conservative fix for doing BPF properly in the BPF classifier of the packet scheduler on ingress. Also from Alexei. 3) The SKB scrubber should not clear out the packet MARK and security label, from Herbert Xu. 4) Fix oops on rmmod in stmmac driver, from Bryan O'Donoghue. 5) Pause handling is not correct in the stmmac driver because it doesn't take into consideration the RX and TX fifo sizes. From Vince Bridgers. 6) Failure path missing unlock in FOU driver, from Wang Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) net: dsa: use DEVICE_ATTR_RW to declare temp1_max netns: remove BUG_ONs from net_generic() IB/ipoib: Fix ndo_get_iflink sfc: Fix memcpy() with const destination compiler warning. altera tse: Fix network-delays and -retransmissions after high throughput. net: remove unused 'dev' argument from netif_needs_gso() act_mirred: Fix bogus header when redirecting from VLAN inet_diag: fix access to tcp cc information tcp: tcp_get_info() should fetch socket fields once net: dsa: mv88e6xxx: Add missing initialization in mv88e6xxx_set_port_state() skbuff: Do not scrub skb mark within the same name space Revert "net: Reset secmark when scrubbing packet" bpf: fix two bugs in verification logic when accessing 'ctx' pointer bpf: fix bpf helpers to use skb->mac_header relative offsets stmmac: Configure Flow Control to work correctly based on rxfifo size stmmac: Enable unicast pause frame detect in GMAC Register 6 stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree stmmac: Add defines and documentation for enabling flow control stmmac: Add properties for transmit and receive fifo sizes stmmac: fix oops on rmmod after assigning ip addr ...
| * net: remove unused 'dev' argument from netif_needs_gso()Johannes Berg2015-04-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 04ffcb255f22 ("net: Add ndo_gso_check") Tom originally added the 'dev' argument to be able to call ndo_gso_check(). Then later, when generalizing this in commit 5f35227ea34b ("net: Generalize ndo_gso_check to ndo_features_check") Jesse removed the call to ndo_gso_check() in netif_needs_gso() by calling the new ndo_features_check() in a different place. This made the 'dev' argument unused. Remove the unused argument and go back to the code as before. Cc: Tom Herbert <therbert@google.com> Cc: Jesse Gross <jesse@nicira.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'stable/for-linus-4.1-rc0-tag' of ↵Linus Torvalds2015-04-161-4/+5
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen features and fixes from David Vrabel: - use a single source list of hypercalls, generating other tables etc. at build time. - add a "Xen PV" APIC driver to support >255 VCPUs in PV guests. - significant performance improve to guest save/restore/migration. - scsiback/front save/restore support. - infrastructure for multi-page xenbus rings. - misc fixes. * tag 'stable/for-linus-4.1-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pci: Try harder to get PXM information for Xen xenbus_client: Extend interface to support multi-page ring xen-pciback: also support disabling of bus-mastering and memory-write-invalidate xen: support suspend/resume in pvscsi frontend xen: scsiback: add LUN of restored domain xen-scsiback: define a pr_fmt macro with xen-pvscsi xen/mce: fix up xen_late_init_mcelog() error handling xen/privcmd: improve performance of MMAPBATCH_V2 xen: unify foreign GFN map/unmap for auto-xlated physmap guests x86/xen/apic: WARN with details. x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs xen/pciback: Don't print scary messages when unsupported by hypervisor. xen: use generated hypercall symbols in arch/x86/xen/xen-head.S xen: use generated hypervisor symbols in arch/x86/xen/trace.c xen: synchronize include/xen/interface/xen.h with xen xen: build infrastructure for generating hypercall depending symbols xen: balloon: Use static attribute groups for sysfs entries xen: pcpu: Use static attribute groups for sysfs entry
| * xenbus_client: Extend interface to support multi-page ringWei Liu2015-04-151-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Originally Xen PV drivers only use single-page ring to pass along information. This might limit the throughput between frontend and backend. The patch extends Xenbus driver to support multi-page ring, which in general should improve throughput if ring is the bottleneck. Changes to various frontend / backend to adapt to the new interface are also included. Affected Xen drivers: * blkfront/back * netfront/back * pcifront/back * scsifront/back * vtpmfront The interface is documented, as before, in xenbus_client.c. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Bob Liu <bob.liu@oracle.com> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* | xen-netfront: transmit fully GSO-sized packetsJonathan Davies2015-04-021-4/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xen-netfront limits transmitted skbs to be at most 44 segments in size. However, GSO permits up to 65536 bytes, which means a maximum of 45 segments of 1448 bytes each. This slight reduction in the size of packets means a slight loss in efficiency. Since c/s 9ecd1a75d, xen-netfront sets gso_max_size to XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER, where XEN_NETIF_MAX_TX_SIZE is 65535 bytes. The calculation used by tcp_tso_autosize (and also tcp_xmit_size_goal since c/s 6c09fa09d) in determining when to split an skb into two is sk->sk_gso_max_size - 1 - MAX_TCP_HEADER. So the maximum permitted size of an skb is calculated to be (XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER) - 1 - MAX_TCP_HEADER. Intuitively, this looks like the wrong formula -- we don't need two TCP headers. Instead, there is no need to deviate from the default gso_max_size of 65536 as this already accommodates the size of the header. Currently, the largest skb transmitted by netfront is 63712 bytes (44 segments of 1448 bytes each), as observed via tcpdump. This patch makes netfront send skbs of up to 65160 bytes (45 segments of 1448 bytes each). Similarly, the maximum allowable mtu does not need to subtract MAX_TCP_HEADER as it relates to the size of the whole packet, including the header. Fixes: 9ecd1a75d977 ("xen-netfront: reduce gso_max_size to account for max TCP header") Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netfront: Use static attribute groups for sysfs entriesTakashi Iwai2015-02-051-46/+16
| | | | | | | | | | | Instead of manual calls of device_create_file() and device_remove_files(), assign the static attribute groups to netdev groups array. This simplifies the code and avoids the possible races. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-01-151-29/+42
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/xen-netfront.c Minor overlapping changes in xen-netfront.c, mostly to do with some buffer management changes alongside the split of stats into TX and RX. Signed-off-by: David S. Miller <davem@davemloft.net>
| * xen-netfront: use different locks for Rx and Tx statsDavid Vrabel2015-01-131-29/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In netfront the Rx and Tx path are independent and use different locks. The Tx lock is held with hard irqs disabled, but Rx lock is held with only BH disabled. Since both sides use the same stats lock, a deadlock may occur. [ INFO: possible irq lock inversion dependency detected ] 3.16.2 #16 Not tainted --------------------------------------------------------- swapper/0/0 just changed the state of lock: (&(&queue->tx_lock)->rlock){-.....}, at: [<c03adec8>] xennet_tx_interrupt+0x14/0x34 but this lock took another, HARDIRQ-unsafe lock in the past: (&stat->syncp.seq#2){+.-...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&stat->syncp.seq#2); local_irq_disable(); lock(&(&queue->tx_lock)->rlock); lock(&stat->syncp.seq#2); <Interrupt> lock(&(&queue->tx_lock)->rlock); Using separate locks for the Rx and Tx stats fixes this deadlock. Reported-by: Dmitry Piotrovsky <piotrovskydmitry@gmail.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xen-netfront: refactor making Tx requestsDavid Vrabel2015-01-141-114/+67
| | | | | | | | | | | | | | | | | | | | | | | | Eliminate all the duplicate code for making Tx requests by consolidating them into a single xennet_make_one_txreq() function. xennet_make_one_txreq() and xennet_make_txreqs() work with pages and offsets so it will be easier to make netfront handle highmem frags in the future. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xen-netfront: refactor skb slot countingDavid Vrabel2015-01-141-6/+7
| | | | | | | | | | | | | | | | A function to count the number of slots an skb needs is more useful than one that counts the slots needed for only the frags. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: net: xen-netfront: remove residual dead codeVincenzo Maffione2015-01-121-4/+0
|/ | | | | | | | | This patch removes some unused arrays from the netfront private data structures. These arrays were used in "flip" receive mode. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netfront: use napi_complete() correctly to prevent Rx stallingDavid Vrabel2014-12-161-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | After d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less interrupt masking in NAPI) the napi instance is removed from the per-cpu list prior to calling the n->poll(), and is only requeued if all of the budget was used. This inadvertently broke netfront because netfront does not use NAPI correctly. If netfront had not used all of its budget it would do a final check for any Rx responses and avoid calling napi_complete() if there were more responses. It would still return under budget so it would never be rescheduled. The final check would also not re-enable the Rx interrupt. Additionally, xenvif_poll() would also call napi_complete() /after/ enabling the interrupt. This resulted in a race between the napi_complete() and the napi_schedule() in the interrupt handler. The use of local_irq_save/restore() avoided by race iff the handler is running on the same CPU but not if it was running on a different CPU. Fix both of these by always calling napi_compete() if the budget was not all used, and then calling napi_schedule() if the final checks says there's more work. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-12-101-5/+3
|\ | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/amd/xgbe/xgbe-desc.c drivers/net/ethernet/renesas/sh_eth.c Overlapping changes in both conflict cases. Signed-off-by: David S. Miller <davem@davemloft.net>
| * xen-netfront: use correct linear area after linearizing an skbDavid Vrabel2014-12-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 97a6d1bb2b658ac85ed88205ccd1ab809899884d (xen-netfront: Fix handling packets on compound pages with skb_linearize) attempted to fix a problem where an skb that would have required too many slots would be dropped causing TCP connections to stall. However, it filled in the first slot using the original buffer and not the new one and would use the wrong offset and grant access to the wrong page. Netback would notice the malformed request and stop all traffic on the VIF, reporting: vif vif-3-0 vif3.0: txreq.offset: 85e, size: 4002, end: 6144 vif vif-3-0 vif3.0: fatal error; disabling device Reported-by: Anthony Wright <anthony@overnetdata.com> Tested-by: Anthony Wright <anthony@overnetdata.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * xen-netfront: Remove BUGs on paged skb data which crosses a page boundarySeth Forshee2014-12-021-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These BUGs can be erroneously triggered by frags which refer to tail pages within a compound page. The data in these pages may overrun the hardware page while still being contained within the compound page, but since compound_order() evaluates to 0 for tail pages the assertion fails. The code already iterates through subsequent pages correctly in this scenario, so the BUGs are unnecessary and can be removed. Fixes: f36c374782e4 ("xen/netfront: handle compound page fragments on transmit") Cc: <stable@vger.kernel.org> # 3.7+ Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xen-netfront: always keep the Rx ring full of requestsDavid Vrabel2014-10-261-191/+62
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | A full Rx ring only requires 1 MiB of memory. This is not enough memory that it is useful to dynamically scale the number of Rx requests in the ring based on traffic rates, because: a) Even the full 1 MiB is a tiny fraction of a typically modern Linux VM (for example, the AWS micro instance still has 1 GiB of memory). b) Netfront would have used up to 1 MiB already even with moderate data rates (there was no adjustment of target based on memory pressure). c) Small VMs are going to typically have one VCPU and hence only one queue. Keeping the ring full of Rx requests handles bursty traffic better than trying to converge on an optimal number of requests to keep filled. On a 4 core host, an iperf -P 64 -t 60 run from dom0 to a 4 VCPU guest improved from 5.1 Gbit/s to 5.6 Gbit/s. Gains with more bursty traffic are expected to be higher. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2014-10-181-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Include fixes for netrom and dsa (Fabian Frederick and Florian Fainelli) 2) Fix FIXED_PHY support in stmmac, from Giuseppe CAVALLARO. 3) Several SKB use after free fixes (vxlan, openvswitch, vxlan, ip_tunnel, fou), from Li ROngQing. 4) fec driver PTP support fixes from Luwei Zhou and Nimrod Andy. 5) Use after free in virtio_net, from Michael S Tsirkin. 6) Fix flow mask handling for megaflows in openvswitch, from Pravin B Shelar. 7) ISDN gigaset and capi bug fixes from Tilman Schmidt. 8) Fix route leak in ip_send_unicast_reply(), from Vasily Averin. 9) Fix two eBPF JIT bugs on x86, from Alexei Starovoitov. 10) TCP_SKB_CB() reorganization caused a few regressions, fixed by Cong Wang and Eric Dumazet. 11) Don't overwrite end of SKB when parsing malformed sctp ASCONF chunks, from Daniel Borkmann. 12) Don't call sock_kfree_s() with NULL pointers, this function also has the side effect of adjusting the socket memory usage. From Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) bna: fix skb->truesize underestimation net: dsa: add includes for ethtool and phy_fixed definitions openvswitch: Set flow-key members. netrom: use linux/uaccess.h dsa: Fix conversion from host device to mii bus tipc: fix bug in bundled buffer reception ipv6: introduce tcp_v6_iif() sfc: add support for skb->xmit_more r8152: return -EBUSY for runtime suspend ipv4: fix a potential use after free in fou.c ipv4: fix a potential use after free in ip_tunnel_core.c hyperv: Add handling of IP header with option field in netvsc_set_hash() openvswitch: Create right mask with disabled megaflows vxlan: fix a free after use openvswitch: fix a use after free ipv4: dst_entry leak in ip_send_unicast_reply() ipv4: clean up cookie_v4_check() ipv4: share tcp_v4_save_options() with cookie_v4_check() ipv4: call __ip_options_echo() in cookie_v4_check() atm: simplify lanai.c by using module_pci_driver ...
| * net: Add ndo_gso_checkTom Herbert2014-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ndo_gso_check which a device can define to indicate whether is is capable of doing GSO on a packet. This funciton would be called from the stack to determine whether software GSO is needed to be done. A driver should populate this function if it advertises GSO types for which there are combinations that it wouldn't be able to handle. For instance a device that performs UDP tunneling might only implement support for transparent Ethernet bridging type of inner packets or might have limitations on lengths of inner headers. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xen: remove DEFINE_XENBUS_DRIVER() macroDavid Vrabel2014-10-061-8/+8
|/ | | | | | | | | | The DEFINE_XENBUS_DRIVER() macro looks a bit weird and causes sparse errors. Replace the uses with standard structure definitions instead. This is similar to pci and usb device registration. Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen-netfront: Fix handling packets on compound pages with skb_linearizeZoltan Kiss2014-08-111-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a long known problem with the netfront/netback interface: if the guest tries to send a packet which constitues more than MAX_SKB_FRAGS + 1 ring slots, it gets dropped. The reason is that netback maps these slots to a frag in the frags array, which is limited by size. Having so many slots can occur since compound pages were introduced, as the ring protocol slice them up into individual (non-compound) page aligned slots. The theoretical worst case scenario looks like this (note, skbs are limited to 64 Kb here): linear buffer: at most PAGE_SIZE - 17 * 2 bytes, overlapping page boundary, using 2 slots first 15 frags: 1 + PAGE_SIZE + 1 bytes long, first and last bytes are at the end and the beginning of a page, therefore they use 3 * 15 = 45 slots last 2 frags: 1 + 1 bytes, overlapping page boundary, 2 * 2 = 4 slots Although I don't think this 51 slots skb can really happen, we need a solution which can deal with every scenario. In real life there is only a few slots overdue, but usually it causes the TCP stream to be blocked, as the retry will most likely have the same buffer layout. This patch solves this problem by linearizing the packet. This is not the fastest way, and it can fail much easier as it tries to allocate a big linear area for the whole packet, but probably easier by an order of magnitude than anything else. Probably this code path is not touched very frequently anyway. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Paul Durrant <paul.durrant@citrix.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xenproject.org Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netfront: print correct number of queuesDavid Vrabel2014-07-311-2/+2
| | | | | | | | When less than the requested number of queues could be created, include the actual number in the warning (instead of the requested number). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netfront: release per-queue Tx and Rx resource when disconnectingDavid Vrabel2014-07-311-61/+7
| | | | | | | | | | | | | | | | | | Since netfront may reconnect to a backend with a different number of queues, all per-queue Rx and Tx resources (skbs and grant references) should be freed when disconnecting. Without this fix, the Tx and Rx grant refs are not released and netfront will exhaust them after only a few reconnections. netfront will fail to connect when no free grant references are available. Since all Rx bufs are freed and reallocated instead of reused this will add some additional delay to the reconnection but this is expected to be small compared to the time taken by any backend hotplug scripts etc. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netfront: fix locking in connect error pathDavid Vrabel2014-07-311-1/+1
| | | | | | | | If no queues could be created when connecting to the backend, one of the error paths would deadlock. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netfront: call netif_carrier_off() only once when disconnectingDavid Vrabel2014-07-081-7/+4
| | | | | | | | | | | | | | | | | | | In xennet_disconnect_backend(), netif_carrier_off() was called once per queue when it needs to only be called once. The queue locking around the netif_carrier_off() call looked very odd. I think they were supposed to synchronize any NAPI instances with the expectation that no further NAPI instances would be scheduled because of the carrier being off (see the check in xennet_rx_interrupt()). But I can't easily tell if this works correctly. Instead, add a napi_synchronize() call after disabling the interrupts. This is obviously correct as with no Rx interrupts, no further NAPI instances will be scheduled. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud