summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rtlwifi
Commit message (Collapse)AuthorAgeFilesLines
* rtlwifi: rtl8723be: Add module parameter for MSI interruptsLarry Finger2015-08-031-0/+1
| | | | | | | | | The driver code allows for the disabling of MSI interrupts; however the module_parm line was missed and the option fails to show with modinfo. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.15+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: Fix NULL dereference when PCI driver used as an APLuis Felipe Dominguez Vega2015-07-311-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 33511b157bbcebaef853cc1811992b664a2e5862 ("rtlwifi: add support to send beacon frame"), the mechanism for sending beacons was established. That patch works correctly for rtl8192cu, but there is a possibility of getting the following warnings in the PCI drivers: WARNING: CPU: 1 PID: 2439 at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x179/0x1d0 [mac80211]() wlp5s0: Failed check-sdata-in-driver check, flags: 0x0 The warning is followed by a NULL pointer dereference as follows: BUG: unable to handle kernel NULL pointer dereference at 0000000000000006 IP: [<ffffffffc073998e>] rtl_get_tcb_desc+0x5e/0x760 [rtlwifi] This problem was reported at http://thread.gmane.org/gmane.linux.kernel.wireless.general/138645, but no solution was found at that time. The problem was also reported at https://bugzilla.kernel.org/show_bug.cgi?id=9744 and this solution was developed and tested there. The USB driver works with a NULL final argument in the adapter_tx() callback; however, the PCI drivers need a struct rtl_tcb_desc in that position. Fixes: 33511b157bbc ("rtlwifi: add support to send beacon frame.") Signed-off-by: Luis Felipe Dominguez Vega <lfdominguez@nauta.cu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.19+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* Merge tag 'wireless-drivers-next-for-davem-2015-06-18' of ↵David S. Miller2015-06-2314-111/+63
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: mwifiex: * enhancements for AP mode: support verbose information in station dump command and also information about AP link. * enable power save by default brcmfmac: * fix module reload issue for PCIe * improving msgbuf protocol for PCIe devices * rework .get_station() cfg80211 callback operation * determine interface combinations upon device feature support ath9k: * ath9k_htc: add support of channel switch wil6210: * add modparam for bcast ring size * support hidden SSID * add per-MCS Rx stats ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * rtlwifi: rtl8192c: Add init codes for "fw_version" and "fw_subversion".Taehee Yoo2015-06-151-1/+2
| | | | | | | | | | | | | | | | | | | | The variable "fw_version" is used in the _ResetDigitalProcedure1(). but It is not initialized. so I add init codes for "fw_version" and "fw_subversion". Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * rtlwifi: rtl8192cu: Fix variable isfirst_ampduTaehee Yoo2015-06-151-1/+1
| | | | | | | | | | | | | | | | | | rtl92cu_rx_query_desc set a isampdu twice. but second code is related to isfirst_ampdu. so i change it. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * rtlwifi: rtl8192cu: debug message change "RTL8192CE" to "RTL8192CU"Taehee Yoo2015-06-151-5/+5
| | | | | | | | | | | | | | | | In the rtlwifi/rtl8192cu, I change debug message "RTL8192CE" to "RTL8192CU". Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * rtlwifi: rtl8192cu: remove duplicated routine in ↵Taehee Yoo2015-06-151-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | _rtl92c_phy_rf6052_config_parafile in the _rtl92c_phy_rf6052_config_parafile(), cases RF90_PATH_A and RF90_PATH_B call the same routine. so i remove one of these routine. also the return routine is duplicated. so i remove it. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * rtlwifi: fix tm_trigger usageHans Ulli Kroll2015-06-157-29/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | While working on getting my rtl8821au driver in pretty shape for inclusion, it is dicosvered that the tm_trigger flag is used only for the first device using this driver. This flag handles the thermal power management in the hardware. To change this add a entry in sttruct rtl_dm, so each device can handle is separately. Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * rtlwifi: rtl8192cu: remove INTF_PCI and INTF_USBTaehee Yoo2015-06-151-14/+4
| | | | | | | | | | | | | | | | in the rtlwifi/rtl8192cu, INTF_PCI and INTF_USB is unnecessary. because RTL8192CU chipset is only USB interface. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * rtlwifi: rtl8192cu: remove _InitBeaconParameters().Taehee Yoo2015-06-153-39/+22
| | | | | | | | | | | | | | | | | | | | | | _InitBeaconParameters() and rtl92cu_init_beacon_parameters() is same routine. I remove both functions. then i add _rtl92cu_init_beacon_parameters() in the hw.c. _rtl92cu_init_beacon_parameters() is same routine with _InitBeaconParameters(). Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * rtlwifi: rtl8192cu: remove IS_HARDWARE_TYPE_8192CE and IS_HARDWARE_TYPE_8192CUTaehee Yoo2015-06-151-15/+3
| | | | | | | | | | | | | | | | in the rtlwifi/rtl8192cu, IS_HARDWARE_TYPE_8192CE and IS_HARDWARE_TYPE_8192CU is unnecessary. because rtlwifi/rtl8192cu codes aren't shared. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * rtlwifi: rtl8192cu: Fix performance issue.Taehee Yoo2015-06-081-3/+5
| | | | | | | | | | | | | | | | | | | | After physical reconnect, the rtl8192cu chipset shows low transmission rates.It cause is that variable "iqk_initialized" do not de-initialized. So I add this code. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* | mac80211: convert HW flags to unsigned long bitmapJohannes Berg2015-06-101-12/+10
|/ | | | | | | | | | | | | | | As we're running out of hardware capability flags pretty quickly, convert them to use the regular test_bit() style unsigned long bitmaps. This introduces a number of helper functions/macros to set and to test the bits, along with new debugfs code. The occurrences of an explicit __clear_bit() are intentional, the drivers were never supposed to change their supported bits on the fly. We should investigate changing this to be a per-frame flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* rtlwifi: fix typos in KconfigKevin Lo2015-05-261-1/+1
| | | | | | | This patch fixes typos in drivers/net/wirless/rtlwifi/Kconfig. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: Remove the clear interrupt routine from all driversVincent Fann2015-05-265-83/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Several of these drivers have there TX randomly blocked for 3~5 seconds while measuring tx throughput (iperf). The root couse happens in rtl_pci_flush(). The function uses a while-loop to wait for TX queue length to decrease to 0. The TX queue length counts the number of packets that are queued in the driver. The driver relys on the TX OK interrupt to return skb and reduce TX queue length. The interrupt subroutine disables interupts, reads the interrupt registers, and then clears the registers in the beginning of _rtl_pci_interrupt(). After all interupts process are finished, the driver invokes enable_interrupt() to enable interupts. This behavior is normal for an interrupt subroutine. But enable_interrupt() invokes clear_interrupt() again. This unexpected interrupt clearing may cleari me fresh TX OK interrupts. These missing interrupts cause TX queue length to never reduce to 0i, which causes rtl_pci_flush() to be stuck in unterminated while-loop. This patch removes clear_interrupt() in enable_interrupt() to avoid this behavior. Signed-off-by: Vincent Fann <vincent_fann@realtek.com> Signed-off-by: Shao Fu <shaofu@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.18+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: rtl8821ae: Fix problem with regulatory informationShao Fu2015-05-261-2/+2
| | | | | | | | The driver was not setting a channel plan. Now it gets it from EEPROM. Signed-off-by: Shao Fu <shaofu@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: rtl8723be: Update driver for regulatory changesShao Fu2015-05-261-2/+2
| | | | | | | | The driver is converted to use the channel plan in the EEPROM. Signed-off-by: Shao Fu <shaofu@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: rtl8192ee: Apply the regulatory changes to driverShao Fu2015-05-261-2/+2
| | | | | | | | | | | The driver was setting a channel plan for the world. Now it reads it fromi EEPROM. In addition, a typo was fixed. Signed-off-by: Shao Fu <shaofu@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: rtl8188ee: Apply the new regulatory informationShao Fu2015-05-261-2/+2
| | | | | | | | | The driver was setting a channel plan for the world. Now it reads it from EEPROM. Signed-off-by: Shao Fu <shaofu@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: Update regulatory databaseShao Fu2015-05-262-4/+39
| | | | | | | | | | Driver rtlwifi maintains its own regulatory information, The Chrome Autotest (https://www.chromium.org/chromium-os/testing/autotest-user-doc) showed some errors. This patch adds the necessary information for rtlwifi. Signed-off-by: Shao Fu <shaofu@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: btcoexist: Fix interference between rtl8723be and BluetoothDaniel Drake2015-05-261-2/+5
| | | | | | | | | | | | During usage of the new Bluetooth driver for Realtek devices, it was found that BT scans were inhibited for the RTL8723BE when wireless was active. The exact cause of this interference is not known yet, but a satisfactory work around has been found that does not seem to have any visible side effects. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Shao Fu <shaofu@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: rtl8192cu: Remove rtl92c_init_beacon_max_error's parameterTaehee Yoo2015-05-263-3/+3
| | | | | | | | parameter "infra_mode" of rtl92c_init_beacon_max_error() is not used. so i remove this. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: rtl8192cu: Remove setting REG_BCN_MAX_ERR code in ↵Taehee Yoo2015-05-261-1/+0
| | | | | | | | | | | _rtl92cu_set_media_status(). Initialization routine set REG_BCN_MAX_ERR to 0xFF. also _rtl92cu_set_media_status set REG_BCN_MAX_ERR to same value. so i remove this code. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* rtlwifi: rtl8188ee: Fix pwrseqcmd.h include path.Lauri Kenttä2015-05-262-2/+2
| | | | | Signed-off-by: Lauri Kenttä <lauri.kentta@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* Merge tag 'wireless-drivers-next-for-davem-2015-05-21' of ↵David S. Miller2015-05-242-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== ath10k: * enable channel 144 on 5 GHz * enable Adaptive Noise Immunity (ANI) by default * add Wake on Wireless LAN (WOW) patterns support * add basic Tunneled Direct Link Setup (TDLS) support * add multi-channel support for QCA6174 * enable IBSS RSN support * enable Bluetooth Coexistance whenever firmware supports it * add more versatile way to set bitrates used by the firmware ath9k: * spectral scan: add support for multiple FFT frames per report iwlwifi: * major rework of the scan code (Luca) * some work on the thermal code (Chaya Rachel) * some work on the firwmare debugging infrastructure brcmfmac: * SDIO suspend and resume fixes * wiphy band info and changes in regulatory settings * add support for BCM4324 SDIO and BCM4358 PCIe * enable support of PCIe devices on router platforms (Hante) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * wireless: fix typos in mwifiex and rtlwifiMasanari Iida2015-05-092-2/+2
| | | | | | | | | | | | | | This patch fix some spelling typo in drivers/net/wirless Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-05-131-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Four minor merge conflicts: 1) qca_spi.c renamed the local variable used for the SPI device from spi_device to spi, meanwhile the spi_set_drvdata() call got moved further up in the probe function. 2) Two changes were both adding new members to codel params structure, and thus we had overlapping changes to the initializer function. 3) 'net' was making a fix to sk_release_kernel() which is completely removed in 'net-next'. 4) In net_namespace.c, the rtnl_net_fill() call for GET operations had the command value fixed, meanwhile 'net-next' adjusted the argument signature a bit. This also matches example merge resolutions posted by Stephen Rothwell over the past two days. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | rtlwifi: rtl8192cu: Fix kernel deadlockLarry Finger2015-04-281-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by: Bernhard Wiedemann <bwiedemann@suse.com> Tested-by: Bernhard Wiedemann <bwiedemann@suse.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Cc: Bernhard Wiedemann <bwiedemann@suse.com> Cc: Takashi Iwai<tiwai@suse.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* | mac80211: remove support for IFF_PROMISCJohannes Berg2015-04-241-2/+1
|/ | | | | | | | | | | This support is essentially useless as typically networks are encrypted, frames will be filtered by hardware, and rate scaling will be done with the intended recipient in mind. For real monitoring of the network, the monitor mode support should be used instead. Removing it removes a lot of corner cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2015-04-1538-292/+66
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Add BQL support to via-rhine, from Tino Reichardt. 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers can support hw switch offloading. From Floria Fainelli. 3) Allow 'ip address' commands to initiate multicast group join/leave, from Madhu Challa. 4) Many ipv4 FIB lookup optimizations from Alexander Duyck. 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel Borkmann. 6) Remove the ugly compat support in ARP for ugly layers like ax25, rose, etc. And use this to clean up the neigh layer, then use it to implement MPLS support. All from Eric Biederman. 7) Support L3 forwarding offloading in switches, from Scott Feldman. 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed up route lookups even further. From Alexander Duyck. 9) Many improvements and bug fixes to the rhashtable implementation, from Herbert Xu and Thomas Graf. In particular, in the case where an rhashtable user bulk adds a large number of items into an empty table, we expand the table much more sanely. 10) Don't make the tcp_metrics hash table per-namespace, from Eric Biederman. 11) Extend EBPF to access SKB fields, from Alexei Starovoitov. 12) Split out new connection request sockets so that they can be established in the main hash table. Much less false sharing since hash lookups go direct to the request sockets instead of having to go first to the listener then to the request socks hashed underneath. From Eric Dumazet. 13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk. 14) Support stable privacy address generation for RFC7217 in IPV6. From Hannes Frederic Sowa. 15) Hash network namespace into IP frag IDs, also from Hannes Frederic Sowa. 16) Convert PTP get/set methods to use 64-bit time, from Richard Cochran. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits) fm10k: Bump driver version to 0.15.2 fm10k: corrected VF multicast update fm10k: mbx_update_max_size does not drop all oversized messages fm10k: reset head instead of calling update_max_size fm10k: renamed mbx_tx_dropped to mbx_tx_oversized fm10k: update xcast mode before synchronizing multicast addresses fm10k: start service timer on probe fm10k: fix function header comment fm10k: comment next_vf_mbx flow fm10k: don't handle mailbox events in iov_event path and always process mailbox fm10k: use separate workqueue for fm10k driver fm10k: Set PF queues to unlimited bandwidth during virtualization fm10k: expose tx_timeout_count as an ethtool stat fm10k: only increment tx_timeout_count in Tx hang path fm10k: remove extraneous "Reset interface" message fm10k: separate PF only stats so that VF does not display them fm10k: use hw->mac.max_queues for stats fm10k: only show actual queues, not the maximum in hardware fm10k: allow creation of VLAN on default vid fm10k: fix unused warnings ...
| * rtlwifi: Add encryption argument in rtl_is_special_data for checking DHCP ↵Taehee Yoo2015-04-074-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | packet. rtl8192cu can't connect to AP after physical reconnect. according to dmesg, that problem's cause was DHCP timeout. rtl_is_special_data function checks packet type for adjusting rate. when that function is called from _rtl_rc_get_highest_rix, it can not calculate offset correctly. so i add argument is_encn in rtl_is_special_data. is_enc variable mean that iv header is added in skb parameter. i test only rtl8192cu chipset. because i doesn't have other rtlwifi chipsets. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-04-021-1/+11
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
| * \ Merge tag 'wireless-drivers-next-for-davem-2015-04-01' of ↵David S. Miller2015-04-0114-40/+32
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: ath9k: * add Active Interference Cancellation, a method implemented in the HW to counter WLAN RX > sensitivity degradation when BT is transmitting at the same time. This feature is supported by cards like WB222 based on AR9462. iwlwifi: * Location Aware Regulatory was added by Arik * 8000 device family work * update to the BT Coex firmware API brmcfmac: * add new BCM43455 and BCM43457 SDIO device support * add new BCM43430 SDIO device support wil6210: * take care of AP bridging * fix NAPI behavior * found approach to achieve 4*n+2 alignment of Rx frames rt2x00: * add new rt2800usb device DWA 130 rtlwifi: * add USB ID for D-Link DWA-131 * add USB ID ASUS N10 WiFi dongle mwifiex: * throughput enhancements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | rtlwifi: rtl8192cu: Add new device IDMarek Vasut2015-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add new ID for ASUS N10 WiFi dongle. Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: John W. Linville <linville@tuxdriver.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | rtlwifi: rtl8192cu: Add new USB IDLarry Finger2015-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB ID 2001:330d is used for a D-Link DWA-131. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | rtlwifi: Change REG_CR+2 to MSRTaehee Yoo2015-03-309-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I changed REG_CR+2 and (MSR) to MSR because MSR is defined as (REG_CR + 2). Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | rtl8188ee: fix build break due to missing rtl_hal_pwrseqcmdparsing definitionJeff Layton2015-03-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've been getting this error when building mainline kernels using Fedora's config files: drivers/net/wireless/rtlwifi/rtl8188ee/hw.c: In function ‘_rtl88ee_init_mac’: drivers/net/wireless/rtlwifi/rtl8188ee/hw.c:853:2: error: implicit declaration of function ‘rtl_hal_pwrseqcmdparsing’ [-Werror=implicit-function-declaration] if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, ^ cc1: some warnings being treated as errors scripts/Makefile.build:258: recipe for target 'drivers/net/wireless/rtlwifi/rtl8188ee/hw.o' failed I'm not sure if this is the correct fix, but it does seem to allow the build to complete. I suspect that this was broken by commit 34ed780a6afc (rtlwifi: Fix problems with building an allyesconfig). Most of the files that removed the include of pwrseqcmd.h, added one for ../pwrseqcmd.h. The rtl8188ee driver had it removed it but didn't add the include of the file in the parent directory. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | rtlwifi: No need to export rtl_evm_dbm_jaguar anymorePriit Laes2015-03-163-17/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This function is used only by rtl8821ae so move it there Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | rtlwifi: Clean rtl_evm_db_to_percentage a bitPriit Laes2015-03-161-9/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | rtlwifi: rtl8192cu: remove unused arguments from _beacon_function_enable()Taehee Yoo2015-03-131-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unnecessary parameter in rtl8192cu/hw.c Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | rtlwifi: Remove duplicated prototypeTaehee Yoo2015-03-131-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove duplicated prototype in base.h Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-03-201-2/+5
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Merge tag 'wireless-drivers-next-for-davem-2015-03-06' of ↵David S. Miller2015-03-0628-243/+20
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Major changes: brcmfmac: * sdio improvements * add a debugfs file so users can provide us all the revinfo we could ask for iwlwifi: * add triggers for firmware dump collection * remove support for -9.ucode * new statitics API * rate control improvements ath9k: * add per-vif TX power capability * BT coexistance fixes ath10k: * qca6174: enable STA transmit beamforming (TxBF) support * disable multi-vif power save by default bcma: * enable support for PCIe Gen 2 host devices Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | rtlwifi: rtl8192cu: Add case in rtl92cu_get_hw_regTaehee Yoo2015-03-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add HAL_DEF_WOWLAN case in rtl92cu_get_hw_reg Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | | rtlwifi: rtl8188ee: missing curly braces in handle_branch1()Dan Carpenter2015-03-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From the indenting, it seems like the READ_NEXT_PAIR() was supposed to be inside the while loop. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | | rtlwifi: rtl8821ae: Remove duplicate hex prefixesRasmus Villemoes2015-03-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The # flag in %X means print a 0X prefix. Remove the extra 0x prefix. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | | rtlwifi: Remove unused RTL_SUPPORTED_CTRL_FILTER definePriit Laes2015-03-031-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | | rtlwifi: Remove unused defines from efuse.hPriit Laes2015-03-031-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | | rtlwifi: Remove unused defines from base.hPriit Laes2015-03-031-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| | * | | rtlwifi: Remove unused defines from cam.hPriit Laes2015-03-031-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
OpenPOWER on IntegriCloud